Sonochemically synthesized black phosphorus nanoparticles: a promising candidate for piezocatalytic antibacterial activity with enhanced dielectric properties.

The drawbacks inherent to traditional antibacterial therapies, coupled with the escalating prevalence of multi-drug resistant (MDR) microorganisms, have prompted the imperative need for novel antibacterial strategies. Accordingly, the emerging field of piezocatalysis in semiconductors harnesses mechanical stress to drive chemical reactions by utilizing piezo-generated free charge carriers, presenting a promising technology. To the best of our knowledge, this study is the first to provide a comprehensive overview of the eradication of pathogenic S. aureus bacteria using few-layer black phosphorus (SCBP) piezo catalyst under mechanical stimuli, along with the exploration of temperature dependent dielectric properties. The synthesis of the piezo catalysts involved a one-step cost-effective sonochemical method, and its structural, morphological, elemental, optical, and overall polarization properties were thoroughly characterized and compared with the traditional method-derived product (TABP). The synthesis-introduced defects, reduced crystalline diameters, modified bandgap (1.76 eV), nanoparticle aggregation, photoluminescence quenching, along with interfacial polarization, synergistically contribute to SCBP's exceptional dielectric response (4.596 × 107 @40 Hz), which in turn enhanced the piezocatalytic activity. When subjected to soft ultrasound stimulation at 15 kHz, the piezo catalyst SCBP demonstrated significant ROS-mediated antibacterial activity, resulting in a ∼94.7% mortality rate within 40 minutes. The impact of this study extends to cost-effective energy storage devices and advances in antibacterial therapy, opening new dimensions in both fields.

Topical effect of polyherbal flowers extract on xanthan gum hydrogel patch-induced wound healing activity in human cell lines and male BALB/c mice.

Wound or injury is a breakdown in the skin's protective function as well as damage to the normal tissues. Wound healing is a dynamic and complex phenomenon of replacing injured skin or body tissues. In ancient times theCalendula officinalisandHibiscus rosa-sinensisflowers were extensively used by the tribal communities as herbal medicine for various complications including wound healing. But loading and delivery of such herbal medicines are challenging because it maintains their molecular structure against temperature, moisture, and other ambient factors. This study has fabricated xanthan gum (XG) hydrogel through a facile process and encapsulatedC. officinalisandH. rosa-sinensisflower extract. The resulting hydrogel was characterized by different physical methods like x-ray diffractometer, UV-vis spectroscopy, Fourier transform infrared spectroscopy, SEM, dynamic light scattering, electronkinetic potential in colloidal systems (ZETA) potential, thermogravimetric differential thermal analysis (TGA-DTA), etc. The polyherbal extract was phytochemically screened and observed that flavonoids, alkaloids, terpenoids, tannins, saponins, anthraquinones, glycosides, amino acids, and a few percentages of reducing sugar were present in the polyherbal extract. Polyherbal extract encapsulated XG hydrogel (X@C-H) significantly enhanced the proliferation of fibroblast and keratinocyte cell lines in comparison to the bare excipient treated cells as determined by 3-(4, 5-dimethylthiazol-2-Yl)-2, 5-diphenyltetrazolium bromide assay. Also, the proliferation of these cells was confirmed by BrdU assay and enhanced expression of pAkt. In anin-vivostudy, wound healing activity of BALB/c mice was carried out and we observed that X@C-H hydrogel showed significant result compared to the other groups (untreated, X, X@C, X@H). Henceforth, we conclude that this synthesized biocompatible hydrogel could emerge as a promising carrier of more than one herbal excipients.

Gd(III)-Doped Boehmite Nanoparticle: An Emergent Material for the Fluorescent Sensing of Cr(VI) in Wastewater and Live Cells.

This article reports the effect of Gd(III) doping on the structure, microstructure, and optical properties of boehmite nanoparticles. The bright-blue fluorescence along with a long lifetime makes our material an efficient candidate for optical applications. Our material particularly targets and eliminates hexavalent chromium ions (Cr(VI)) from aqueous media, which turns it into a multifunctional fluorescent nanosensor (MFNS). The development of an efficient hexavalent chromium ion (Cr(VI)) sensor to detect and quantify Cr(VI) ions is still a serious issue worldwide. Thus, this work will be very beneficial for various environmental applications. No such work has been reported so far which includes cost-effective and biocompatible boehmite nanoparticles in this field. Detailed synthesis and characterization procedures for the MFNS have been incorporated here. The biocompatibility of the MFNS has also been studied rigorously by performing cell survivability assay (MTT) and cellular morphology assessments. Our extensive research confirmed that the "turn-off" sensing mechanism of this sensor material is based on a collisional quenching model which initiates the photoinduced electron transfer (PET) process. High selectivity and sensitivity (∼1.05 × 10-5 M) of the MFNS toward hexavalent chromium ions even in real life wastewater samples have been confirmed, which makes this fluorescent probe a potential candidate for new age imaging and sensing technologies.

Investigation of the Origin of Voltage Generation in Potentized Homeopathic Medicine through Raman Spectroscopy.

BACKGROUND: For the study of homeopathic medicines in proper perspective, emerging techniques in material science are being used. Vibrational spectroscopy is one such tool for providing information on different states of hydrogen bonding as an effect of potentization. The associated change in electrical properties is also correlated with this effect. OBJECTIVE: From the vibrational spectra, the changes in hydrogen bonding due to dilution followed by unidirectional vigorous shaking (together termed potentization) of 91% ethanol and two homeopathic medicines Chininum purum and Acidum benzoicum have been studied. The aim was to correlate the result with the change in the electrical properties of the system. METHODS: Raman spectroscopy was used to study the vibrational spectra. A U-shaped glass tube (electrochemical cell), where one arm contained bi-distilled water and the other arm alcohol/homeopathic medicine (the arms being separated by a platinum foil), was used to measure the voltage generated across two symmetrically placed platinum electrodes. RESULTS: For all samples, it was observed that potentization affected the intensity of OH stretching bands at the frequencies 3240 cm-1, 3420 cm-1 and 3620 cm-1, corresponding to strong hydrogen bond, weak hydrogen bond and broken hydrogen bond, respectively. With the increase in potency, in the presence and absence of the two medicines in ethanol, the number of OH groups linked by strong hydrogen bonds decreased, while the number of OH groups with weak hydrogen bonds increased. With the increase in potentization, the number of OH groups with broken hydrogen bonds showed a difference in the presence and absence of the medicine.The voltage measurements for ethanol show that, with succussion, the magnitude of voltage increased with the two medicines at lower potencies, but not at higher potency where the voltage is lower. Acidum benzoicum, which is acidic in nature, had higher voltage values (113mV, 130 mV and 118 mV at 6C, 30C and 200C, respectively), compared with Chininum purum, which is basic in nature (20 mV, 85 mV and 65 mV at 6C, 30C and 200C, respectively). CONCLUSION: The experimental results indicate a correlation between the vibrational and electrical properties of the homeopathic medicines Acidum benzoicum and Chininum purum at different potencies.

Folic acid conjugated curcumin loaded biopolymeric gum acacia microsphere for triple negative breast cancer therapy in invitro and invivo model.

Among the different types of biomaterials, natural excipients gum acacia (GA) is economic and has the potential for controlled drug delivery. We have synthesized GA microspheres by co-precipitation method and characterized them by XRD, FESEM, 1H NMR, FTIR, UV visible spectra and DLS. Despite its potential anti-cancer activity, solubility of curcumin is very low rendering its limit in application. We have used GA microspheres where curcumin can be loaded comfortably and thereby increases its bioavailability. The cytotoxicity of curcumin encapsulated GA microspheres was evaluated on triple negative breast cancer cell lines. They were found to induce apoptosis by perturbing the mitochondrial membrane potential. Folic acid was conjugated to curcumin encapsulated GA microspheres, for delivering it specifically to the cancer cells. The in-vivo study in BALB/C mice model exhibited more tumor regression in case of folic acid targeted curcumin encapsulated GA microsphere. Our results implicates that these microspheres can be an effective therapeutic agent to folate receptors over expressing cancer cells.

Effect of Homeopathic Dilutions of Cuprum Arsenicosum on the Electrical Properties of Poly(Vinylidene Fluoride-Co-Hexafluoropropylene).

BACKGROUND: We report the effects of nanoparticles in homeopathic preparations of copper salts on the electrical properties of polymer film. Previous work showed that the incorporation of metal-derived homeopathic medicines increases the dielectric constant and alternating current (AC) conductivity of an electroactive polymer film that is commonly used as a capacitor in the electronic industry.We report here the effect of dilution of one homeopathic medicine, Cuprum arsenicosum (CuAs), at 200C potency on the electrical properties of the polymer film of poly(vinylidene fluoride-co-hexafluoropropylene). METHODS: CuAs 200c was incorporated in the film by the solution casting method. The electrical characteristics were measured at different frequencies using an inductance, capacitance, and resistance meter. Fourier transform infrared spectroscopy (FTIR) was performed to detect phase change in the polymer film due to the incorporation of CuAs. Morphology and particle size were studied using field emission scanning electron microscopy (FESEM) and energy dispersive X-ray (EDX) spectroscopy. RESULTS: At 10 kHz frequency, both dielectric constant and AC conductivity increased approximately 18 times for the polymer film when incorporated with 2 mL CuAs at 200C potency. FTIR indicated the increase in conducting phase, while FESEM and EDX confirmed the presence of spherical CuAs particles. CONCLUSION: The incorporation of CuAs in the electroactive polymer film enhances the conductivity and dielectric constant. We conclude that these changes arise from the change in phase of the polymer film, and because of the presence of two different metals that affects the interfacial polarization.

Effects of homeopathic medicine on physical properties of matter - a classical and QED perspective

Homeopathic medicines affect physical properties of matter which depend on the characteristic and the potency of the medicine1. These effects can be explained from two aspects: (a) classical and (b) quantum electrodynamical. Using three different sets of experiments where homeopathic medicines have affected the physical properties of matter, we have shown how the results can be interpreted from both these points of view. (AU)

Effect of ultrahigh diluted homeopathic medicines on the electrical properties of PVDF-HFP

In an effort to improve the electrical properties of the electroactive Poly(vinylidene fluoride-hexafluoropropylene) (PVdF-HFP), we introduced a novel and simple approach to synthesize PVDFHFP composite films by incorporating ultrahigh dilutions of two homeopathic medicines Ferrum metallicum (FM) and Zincum oxidatum (ZO) in different potencies. The homeo-PVDF-composite films (HPCF) were synthesized by simple solution casting technique. XRD, FESEM, FTIR studies were performed to check the presence of nanoparticles in the film. The electrical properties of the HPCF samples get enhanced significantly due to the incorporation of the medicines and the effect increases with the increase in potency of the medicines.

Effect of ultrahigh diluted homeopathic medicines on the electrical properties of PVDF-HFP

In an effort to improve the electrical properties of the electroactive Poly(vinylidene fluoridehexafluoropropylene) (PVdF-HFP), we introduced a novel and simple approach to synthesize PVDFHFP composite films by incorporating ultrahigh dilutions of two homeopathic medicines Ferrum metallicum (FM) and Zincum oxidatum (ZO) in different potencies. The homeo-PVDF-composite films (HPCF) were synthesized by simple solution casting technique. XRD, FESEM, FTIR studies were performed to check the presence of nanoparticles in the film. The electrical properties of the HPCF samples get enhanced significantly due to the incorporation of the medicines and the effect increases with the increase in potency of the medicines. (AU)

Safe and symptomatic medicinal use of surface-functionalized Mn3O4 nanoparticles for hyperbilirubinemia treatment in mice.

AIM: Testing the potential of citrate-capped Mn3O4 nanoparticles (NPs) as a therapeutic agent for alternative rapid treatment of hyperbilirubinemia through direct removal of bilirubin (BR) from blood in mice. MATERIALS & METHODS: NPs were synthesized and the mechanism of BR degradation in presence and absence of biological macromolecules were characterized in vitro. To test the in vivo BR degradation ability of NPs, CCl4-intoxicated mice were intraperitoneally injected with NPs. RESULTS: We demonstrated ultrahigh efficacy of the NPs in symptomatic treatment of hyperbilirubinemia for rapid reduction of BR in mice compared with conventional medicine silymarin without any toxicological implications. CONCLUSION: These findings may pave the way for practical clinical use of the NPs as safe medication of hyperbilirubinemia in human subjects.

Derivation of an empirical relation between the size of the nanoparticle and the potency of homeopathic medicines

Homeopathic medicines are often prescribed at very high dilutions and it is a clinically observed fact that the medicinal effect of the drug remains even at these high dilutions. The increase in potency of a medicine due to potentization is still debatable from physico-chemical point of view. Out of various hypotheses to explain this phenomenon, a recent hypothesis, advanced by us and supported by others, is that the size of the constituent particles decreases and eventually achieves nano dimension due to potentization. From the experiments performed by our group, the size of nanoparticles (NPs) of Cuprum metallicum, Zincum oxydatum, Aurum metallicum, Ferrum metallicum and Aconitum napellus (6cH, 30cH and 200cH) have been estimated. A general mathematical expression of the form y = a x-n has been derived which relates the size of NPs (y) with the corresponding potencies (x). There is no method to calculate the accurate potency of the homeopathic medicine, as the potency of a medicine depends to some extent on the method of preparation, for which a standardized procedure is warranted. Also, while handling a medicine, the solvent might evaporate causing a change in the potency. Thus by measuring the size of the NPs and using our proposed standard curve, the potency may be estimated...

Derivation of an empirical relation between the size of the nanoparticle and the potency of homeopathic medicines

Homeopathic medicines are often prescribed at very high dilutions and it is a clinically observed fact that the medicinal effect of the drug remains even at these high dilutions. The increase in potency of a medicine due to potentization is still debatable from physico-chemical point of view. Out of various hypotheses to explain this phenomenon, a recent hypothesis, advanced by us and supported by others, is that the size of the constituent particles decreases and eventually achieves nano dimension due to potentization. From the experiments performed by our group, the size of nanoparticles (NPs) of Cuprum metallicum, Zincum oxydatum, Aurum metallicum, Ferrum metallicum and Aconitum napellus (6cH, 30cH and 200cH) have been estimated. A general mathematical expression of the form y = a x-n has been derived which relates the size of NPs (y) with the corresponding potencies (x). There is no method to calculate the accurate potency of the homeopathic medicine, as the potency of a medicine depends to some extent on the method of preparation, for which a standardized procedure is warranted. Also, while handling a medicine, the solvent might evaporate causing a change in the potency. Thus by measuring the size of the NPs and using our proposed standard curve, the potency may be estimated. (AU)

Development of iron oxide and titania treated fly ash based ceramic and its bioactivity.

The increasing accumulation of fly ash from thermal power plants poses a major problem to the environment. The present work reflects the novel utilization of this profusely available industrial waste in the form of an antibacterial hard ceramic material by treating fly ash with ferric oxide (Fe2O3) and titania (TiO2) during sintering process at 1600 °C. The developed material shows more than 90% bacterial reduction against both Gram-positive and Gram-negative bacteria. The mechanism of their antibacterial action was studied by transmission electron microscopy (TEM) image analysis of the bacterial cross-section. The developed ceramic material acquires hardness due to the enhancement of the natural mullite content in the matrix. The mullite content and the crystallinity of mullite have shown their increasing trend with increasing concentration of the metal oxide during sintering process. A maximum of ~37% increase in mullite was obtained for 7% w/w Fe2O3 and TiO2. Metal oxide lowered the activation energy of the reaction and enhanced the reaction rate of alumina (Al2O3)-silica (SiO2) to form mullite which increases the hardness. The study highlights novel utilization of fly ash as a hard ceramic antibacterial product (bioceramics) for both structural and hygiene applications in an eco-friendly way.