Development and characterization of films from Campomanesia xanthocarpa and commercial citrus pectins with different degrees of methyl-esterification.

In this study, pectins from commercial citrus and isolated from gabiroba (Campomanesia xanthocarpa) fruits, were obtained with different degrees of methyl-esterification (DM) and applied in the films. The DM ranged from 0 % to 62.5 % and the gradual de-esterification process was confirmed by mono-dimensional analysis (1H NMR). In order to investigate the influence of DM values in pectin film properties, PCP (DM: 62.5 %); PCP-5 (DM: 37.4 %); PCP-15 (DM: 19.1 %), and a fully de-esterified sample PCP-35 (DM: 0 %) were selected. The functional properties of the films clearly showed that the DM and cross-linking process are necessary to obtain a material with water resistance. Furthermore, pectin isolated from the fruits of gabiroba was purified (GW-Na, DM: 51.9 %) and partially de-esterified (GW-Na-5, DM: 37.1 %). These pectins were used, for the first time, in development of films and the physical and mechanical properties were compared with films made with PCP and PCP-5 samples. GW-Na and GW-Na-5 films presented suitable properties, with reduced solubility reduced (57.1 and 26.2 %), high degree of swelling (2.14 and 2.26), low flexibility (18.05 and 6.11 MPa), respectively. High strength and rigidity (99.36 and 1040.9 MPa), for both films (GW-Na and GW-Na-5) were demonstrated, similar to that obtained by analyzed citrus pectin.

Effects of pressurized hot water extraction on the yield and chemical characterization of pectins from Campomanesia xanthocarpa Berg fruits.

Pressurized hot water extraction (PHWE), known as a "green" extraction technique, was used to obtain polysaccharide from the pulp of gabiroba (Campomanesia xanthocarpa Berg) fruits. The effects of pressure, temperature, and flow rate on pectin yields were analyzed through a full factorial design experiment 23. The optimal extraction conditions to achieve maximum pectin yield (5.70 wt%) were pressure of 150 bar, temperature of 120 °C, and flow rate of 1.5 mL min-1. The high pressure (100 bar) promoted an increase in galacturonic acid content (36.0%) compared to conventional hot water extraction (CEGP) with 25.7%. Differences in the proportion of homogalacturonan (HG) and rhamnogalacturonan (RG-I) domains ranging from 16.3 to 35.4% and 61.7 to 80.1%, respectively, were observed for each pectin sample according to the extraction conditions. The mono-dimensional (13C-NMR) and bi-dimensional (1H/13C HSQC-NMR) analyses confirmed the presence of HG and RG-I regions and indicated the presence of arabinogalactans type I (AG-I) and arabinogalactans type II (AG-II) in the PHWE pectin samples, which was not found for pectins from gabiroba pulp obtained by CEGP. The results showed that PHWE proved to be a promising method for extracting pectins from gabiroba fruits.