RESUMO
Increasing evidence indicates that photobiomodulation, based on tissue irradiation with photons in the red to near-infrared spectrum, may be an effective therapeutic approach to central nervous system disorders. Although nervous system functionality has been shown to be affected by photons in animal models, as well as in preliminary evidence in healthy subjects or in patients with neuropsychiatric disorders, the mechanisms involved in the photobiomodulation effects have not yet been clarified. We previously observed that photobiomodulation could stimulate glutamate release. Here, we investigate mechanisms potentially involved in the glutamate-releasing effect of photons from adult mouse cerebrocortical nerve terminals. We report evidence of photon ability to induce an exocytotic vesicular release of glutamate from the terminals of glutamatergic neurons in a power-dependent way. It can be hypothesized that photobiomodulation, depending on the potency, can release glutamate in a potentially neurotoxic or physiological range.
Assuntos
Ácido Glutâmico , Fótons , Animais , Camundongos , Córtex Cerebral , Ácido Glutâmico/farmacologia , Terminações Nervosas , Neurônios , SinaptossomosRESUMO
The vascular transport of molecules, cells, and nanoconstructs is a fundamental biophysical process impacting tissue regeneration, delivery of nutrients and therapeutic agents, and the response of the immune system to external pathogens. This process is often studied in single-channel microfluidic devices lacking the complex tridimensional organization of vascular networks. Here, soft lithography is employed to replicate the vein system of a Hedera elix leaf on a polydimethilsiloxane (PDMS) template. The replica is then sealed and connected to an external pumping system to realize an authentically complex microvascular network. This satisfies energy minimization criteria by Murray's law and comprises a network of channels ranging in size from capillaries (â¼50 µm) to large arterioles and venules (â¼400 µm). Micro-PIV (micro-particle image velocimetry) analysis is employed to characterize flow conditions in terms of streamlines, fluid velocity, and flow rates. To demonstrate the ability to reproduce physiologically relevant transport processes, two different applications are demonstrated: vascular deposition of tumor cells and lysis of blood clots. To this end, conditions are identified to culture cells within the microvasculature and realize a confluent endothelial monolayer. Then, the vascular deposition of circulating breast (MDA-MB 231) cancer cells is documented throughout the network under physiologically relevant flow conditions. Firm cell adhesion mostly occurs in channels with low mean blood velocity. As a second application, blood clots are formed within the chip by mixing whole blood with a thrombin solution. After demonstrating the blood clot stability, tissue plasminogen activator (tPA) and tPA-carrying nanoconstructs (tPA-DPNs) are employed as thrombolytics. In agreement with previous data, clot dissolution is equally induced by tPA and tPA-DPNs. The proposed leaf-inspired chip can be efficiently used to study a variety of vascular transport processes in complex microvascular networks, where geometry and flow conditions can be modulated and monitored throughout the experimental campaign.
Assuntos
Materiais Biomiméticos , Fibrinolíticos/química , Hedera/anatomia & histologia , Células Endoteliais da Veia Umbilical Humana/metabolismo , Dispositivos Lab-On-A-Chip , Folhas de Planta/anatomia & histologia , Trombose/metabolismo , Ativador de Plasminogênio Tecidual/química , Transporte Biológico , Células Endoteliais da Veia Umbilical Humana/patologia , Humanos , Trombose/patologiaRESUMO
The control of neuron-substrate adhesion has been always a challenge for fabricating neuron-based cell chips and in particular for multielectrode array (MEA) devices, which warrants the investigation of the electrophysiological activity of neuronal networks. The recent introduction of high-density chips based on the complementary metal oxide semiconductor (CMOS) technology, integrating thousands of electrodes, improved the possibility to sense large networks and raised the challenge to develop newly adapted functionalization techniques to further increase neuron electrode localization to avoid the positioning of cells out of the recording area. Here, we present a simple and straightforward chemical functionalization method that leads to the precise and exclusive positioning of the neural cell bodies onto modified electrodes and inhibits, at the same time, cellular adhesion in the surrounding insulator areas. Different from other approaches, this technique does not require any adhesion molecule as well as complex patterning technique such as µ-contact printing. The functionalization was first optimized on gold (Au) and silicon nitride (Si3N4)-patterned surfaces. The procedure consisted of the introduction of a passivating layer of hydrophobic silane molecules (propyltriethoxysilane [PTES]) followed by a treatment of the Au surface using 11-amino-1-undecanethiol hydrochloride (AT). On model substrates, well-ordered neural networks and an optimal coupling between a single neuron and single micrometric functionalized Au surface were achieved. In addition, we presented the preliminary results of this functionalization method directly applied on a CMOS-MEA: the electrical spontaneous spiking and bursting activities of the network recorded for up to 4 weeks demonstrate an excellent and stable neural adhesion and functional behavior comparable with what expected using a standard adhesion factor, such as polylysine or laminin, thus demonstrating that this procedure can be considered a good starting point to develop alternatives to the traditional chip coatings to provide selective and specific neuron-substrate adhesion.
RESUMO
OBJECTIVES: The study aims at demonstrating the feasibility of a novel type of coupling-agent-free resin composite based on nano-porous fillers. METHODS: The fillers were obtained by ball-milling anodic alumina membranes. Composites were prepared with standard resin at maximum loading of 50% by weight. The resin matrix penetration into the pores was verified visually by scanning electron microscopy and mechanically by atomic force microscopy in force modulation mode. The dynamic flexural modulus at 1Hz was measured by dynamic mechanical analysis. Silver nanoparticles were also synthesized in the pores and their release was investigated with inductive coupled plasma optical emission spectrometry. RESULTS: A storage modulus of 5GPa was measured, similar to the â¼6GPa ones of two coupling-agent-based dental restorative composites used for comparison, which is a promising starting point, additionally showing better one-year equivalent ageing as compared to both commercial materials. Loading the pores with silver nanoparticles was demonstrated as well as their subsequent release in a model system. SIGNIFICANCE: The alumina micro-particles with interconnected nano-pores allow mechanical interlocking between fillers and matrix without the need for chemical bonding. This material is also promising for being made bio-active, after pore filling with different agents.
Assuntos
Óxido de Alumínio/química , Resinas Compostas/química , Materiais Dentários/química , Nanopartículas/química , Bis-Fenol A-Glicidil Metacrilato/química , Sistemas de Liberação de Medicamentos , Módulo de Elasticidade , Estudos de Viabilidade , Humanos , Teste de Materiais , Nanopartículas Metálicas/química , Metacrilatos/química , Microscopia de Força Atômica , Microscopia Eletrônica de Varredura , Maleabilidade , Polietilenoglicóis/química , Ácidos Polimetacrílicos/química , Porosidade , Prata/química , Espectrofotometria Atômica , Estresse Mecânico , Propriedades de Superfície , Temperatura , Fatores de Tempo , Água/químicaRESUMO
We have fabricated nanoporous alumina surfaces by means of anodization in oxalic acid in different conditions and used them as the substrates for the growth of cells from a human osteoblast-like cell line. The rough nanoporous alumina substrates have been compared both with smooth standard Petri dishes used as the control and with commercial substrates of similar material. The viability of the cells has been assessed at different culture times of 4, 11, 18, and 25 days in vitro. It turned out that the porous side of the galvanostatically fabricated alumina performed similar to the control and better than the commercial porous alumina, whereas the potentiostatically fabricated porous alumina performed better than all the other substrates at all times, and in particular at the two shortest time periods of 4 and 11 days in vitro. The best performance of the substrates is associated with intermediate surface roughness and feature spacing.
Assuntos
Óxido de Alumínio/química , Técnicas de Cultura de Células , Osteoblastos/fisiologia , Adesão Celular , Linhagem Celular , Proliferação de Células , Sobrevivência Celular , Eletrodos , Humanos , Microscopia de Força Atômica , Ácido Oxálico/química , PorosidadeRESUMO
BACKGROUND INFORMATION: The rod outer segment (OS) is the specialised organelle where phototransduction takes place. Our previous proteomic and biochemical analyses on purified rod disks showed the functional expression of the respiratory chain complexes I-IV and F1 Fo -ATP synthase in OS disks, as well as active soluble tricarboxylic acid cycle enzymes. Here, we focussed our study on the whole OS that contains the cytosol and plasma membrane and disks as native flattened saccules, unlike spherical osmotically intact disks. RESULTS: OS were purified from bovine retinas and characterised for purity. Oximetry, ATP synthesis and cytochrome c oxidase (COX) assays were performed. The presence of COX and F1F0-ATP synthase (ATP synthase) was assessed by semi-quantitative Western blotting, immunofluorescence or confocal laser scanning microscopy on whole bovine retinas and bovine retinal sections and by immunogold transmission electron microscopy (TEM) of purified OS or bovine retinal sections. Both ATP synthase and COX are catalytically active in OS. These are able to consume oxygen (O2) in the presence of pyruvate and malate. CLSM analyses showed that rhodopsin autofluorescence and MitoTracker Deep Red 633 fluorescence co-localise on rod OS. Data are confirmed by co-localisation studies of ATP synthase with Rh in rod OS by immunofluorescence and TEM in bovine retinal sections. CONCLUSIONS: Our data confirm the expression and activity of COX and ATP synthase in OS, suggestive of the presence of an extra-mitochondrial oxidative phosphorylation in rod OS, meant to supply ATP for the visual transduction. In this respect, the membrane rich OS environment would be meant to absorb both light and O2. The ability of OS to manipulate O2 may shed light on the pathogenesis of many retinal degenerative diseases ascribed to oxidative stress, as well as on the efficacy of the treatment with dietary supplements, presently utilised as supporting therapies.