A review of endocrine disrupting chemicals migration from food contact materials into beverages.

A significant and pressing issue revolves around the potential human exposure to endocrine disrupting chemicals (EDCs), which pose a substantial risk primarily through contaminated beverages. However, a comprehensive review for comparison of the migration rates of EDCs into these matrixes is currently lacking. This study reviews the beverages contamination with EDCs, including phthalates (PAEs), bisphenol A (BPA), hormone-like compounds, elements, and other organic EDCs. Also, the EDCs migration into milk and other dairy products, coffee, tea, and cold beverages related to their release from contact materials, preparation components, and storage conditions are briefly summarized. The data illustrates that besides the contamination of raw materials, the presence of EDCs associated with the type of food contact materials (FCMs)and their migration rate is increased with acidity, temperature, and storage time. The highest concentration of PAEs was detected from plastic and synthetic polymer films, while BPA strongly leaches from epoxy resins and canned metal. Furthermore, the presence of elements with endocrine disrupting characteristics was confirmed in cold beverages, soft drinks, hot drink and milk. Moreover, hormone-like compounds have been found to be released from coffee preparation components. Despite the few data about the migration rate of other EDCs including UV-stabilizers, surfactants, and antibacterial compounds into beverages, their presence was reported into milk, coffee, and different beverages, especially in packed samples. Studies on the EDCs leaching have primarily focused on PAEs and BPA, while other compounds require further investigation. Regardless, the possible risk that EDCs pose to humans through beverage consumption cannot be overlooked.

Microplastics and phthalate esters release from teabags into tea drink: occurrence, human exposure, and health risks.

Tea, the most common infusion worldwide, is usually sold in teabags due to the ease of usage. The increase in the use of plastic materials in the food packaging industry has led to an increase in released contaminants, such as microplastics (MPs) and phthalates (PAEs), in various food products including teabags. In this research, the abundance and features of MPs as well as PAEs concentration were investigated in 45 teabag samples of different Persian and German brands. The abundance of MPs in the Persian and German teabag samples was averagely 412.32 and 147.28 items/single teabag, respectively. Also, average PAEs levels in the Persian and German teabag samples were 2.87 and 2.37 mg/g, respectively. The predominant size category of MPs was related to 100-250 µm. Fibers and transparent were the dominant shape and color of detected MPs in teabags, respectively. Polyethylene (PE) and nylon were the most common MP polymer types. The most prominent PAEs congeners in teabag samples were diethylhexyl phthalate (DEHP) and diisobutyl phthalate (DiBP). Furthermore, MP exposure hazard through tea ingestion was analyzed for children and adults. DEHP showed the cancer risk (CR) for children and adults. The findings of this research indicated that high MPs and PAEs levels are released from teabags into tea drinks. Considering a daily drinking of a volume of 150 and 250 mL tea by children and adults, 486 and 810 MPs may enter their bodies, respectively. Thus, tea prepared with teabag-packed herbs may pose a significant health risk for consumers.

Characteristics and performance of Cd, Ni, and Pb bio-adsorption using Callinectes sapidus biomass: real wastewater treatment.

In the current study, the bio-adsorption potential of Callinectes sapidus biomass for control of cadmium, nickel, and lead from the aqueous stream was assessed. Spectrum analysis of FTIR, AFM, EDAX, mapping, SEM, TEM, and XRF was used to study the properties of the C. sapidus biomass. The XRF analysis revealed that C. sapidus bio-adsorbent has various effective metal oxides that can be useful to adsorb pollutants. The best model to describe the equilibrium data was Freundlich isotherm. The Langmuir bio-adsorption capacity was reported at 31.44 mg g-1, 29.23 mg g-1, and 29.15 mg g-1 for lead, cadmium, and nickel ions, respectively. Pseudo-first-order and pseudo-second-order kinetic models were studied to test the kinetic behavior of the process. An intra-particle diffusion model was used to determine the effective mechanisms involved in the bio-adsorption. Based on t1/2, it can be concluded that the equilibrium speed of the bio-adsorption process is high. The thermodynamic study showed that the metal bio-adsorption process using C. sapidus biomass is exothermic and spontaneous. The field applicability of the crab bio-adsorbent for eliminating concurrently several contaminants (metal ions, antibiotics, sulfate, nitrate, and ammonium) from an actual wastewater was successfully examined.

Polycyclic aromatic hydrocarbons (PAHs) in coastal sediments from urban and industrial areas of Asaluyeh Harbor, Iran: distribution, potential source and ecological risk assessment.

The distribution and toxicity levels of 16 EPA priority pollutant polycyclic aromatic hydrocarbons (PAHs) in the sediments of Asaluyeh shore, Iran were investigated. The total concentrations of the PAHs in surface sediments ranged from 1,054 to 17,448 ng/g dry weights with a mean concentration of 8,067 ng/g. The spatial distribution of PAHs showed that PAH levels are much higher in the industrial areas in comparison with urban areas. Based on diagnostic ratios, pyrogenic activities were dominant sources of PAHs pollution in sediments comparing petroleum sources. The toxic equivalent concentrations (TEQ Carc) of PAHs ranged from 172 to 2,235 ng TEQ/g with mean value of 997.9. Toxicity levels were evaluated using sediment quality guidelines (SQGs) and toxic equivalent factors. Samples were collected from industrial and urban stations in Asaluyeh shores. According to SQGs, ΣPAHs concentrations in sediments of urban areas were below the ERL (effects range low), but the industrial samples had ΣPAHs concentrations between ERL and ERM (effects range median). Furthermore, ΣHPAHs (heavy PAHs) and some individual PAHs in some industrial stations exceeded ERM, indicating adverse ecological risk effects frequently occur. Findings demonstrate that the surface sediment from Asaluyeh shore is highly to very highly contaminated with PAHs.

Data on heavy metals and selected anions in the Persian popular herbal distillates.

In this data article, we determined the concentration levels of heavy metals including Pb, Co, Cd, Mn, Mg, Fe and Cu as well as selected anions including [Formula: see text] , [Formula: see text], [Formula: see text] and [Formula: see text] in the most used and popular herbal distillates in Iran. It is well known that heavy metals may pose a serious health hazard due to their bioaccumulation throughout the trophic chain ("Heavy metals (Cd, Cu, Ni and Pb) content in two fish species of Persian Gulf in Bushehr Port, Iran" (Dobaradaran et al., 2013) [1]; "Comparative investigation of heavy metal, trace, and macro element contents in commercially valuable fish species harvested off from the Persian Gulf" (Abadi et al., 2015) [2]) as well as some other environmental pollutions, "Assessment of sediment quality based on acid-volatile sulfide and simultaneously extracted metals in heavily industrialized area of Asaluyeh, Persian Gulf: concentrations, spatial distributions, and sediment bioavailability/toxicity" (Arfaeinia et al., 2016) [3]. The concentration levels of heavy metals and anions in herbal distillates samples were determined using flame atomic absorption spectrometry (FAAS, Varian AA240, Australia) and a spectrophotometer (M501 Single Beam Scanning UV/VIS, UK) respectively.