The effect of short silica fibers (0.3 µm 3.2 µm) on macrophages.

Silica fibers with a dimension of 0.3 µm ∙ 3.2 µm2 nm were prepared by a modified Stöber synthesis as model particles. The particles were characterized by scanning electron microscopy, elemental analysis, thermogravimetry and X-ray powder diffraction. Their uptake by macrophages (THP-1 cells and NR8383 cells) was studied by confocal laser scanning microscopy and scanning electron microscopy. The uptake by cells was very high, but the silica fibers were not harmful to NR8383 cells in concentrations up to 100 µg mL-1. Only above 100 µg mL-1, significant cell toxic effects were observed, probably induced by a high dose of particles that had sedimented on the cells and led to the adverse effects. The chemotactic response as assessed by the particle-induced migration assay (PICMA) was weak in comparison to a control of agglomerated silica particles. The as-prepared fibers were fully X-ray amorphous but crystallized to ß-cristobalite after heating to 1000 °C and converted to α-cristobalite upon cooling to ambient temperature. The fibers had sintered to larger aggregates but retained their elongated primary shape. The particle cytotoxicity towards THP-1 cells was not significantly enhanced by the crystallization.

New Tools to Probe the Protein Surface: Ultrasmall Gold Nanoparticles Carry Amino Acid Binders.

A strategy toward epitope-selective functionalized nanoparticles is introduced in the following: ultrasmall gold nanoparticles (diameter of the metallic core about 2 nm) were functionalized with molecular tweezers that selectively attach lysine and arginine residues on protein surfaces. Between 11 and 30 tweezer molecules were covalently attached to the surface of each nanoparticle by copper-catalyzed azide alkyne cycloaddition (CuAAC), giving multiavid agents to target proteins. The nanoparticles were characterized by high-resolution transmission electron microscopy, differential centrifugal sedimentation, and 1H NMR spectroscopy (diffusion-ordered spectroscopy, DOSY, and surface composition). The interaction of these nanoparticles with the model proteins hPin1 (WW domain; hPin1-WW) and Survivin was probed by NMR titration and by isothermal titration calorimetry (ITC). The binding to the WW domain of hPin1 occurred with a KD of 41 ± 2 µM, as shown by ITC. The nanoparticle-conjugated tweezers targeted cationic amino acids on the surface of hPin1-WW in the following order: N-terminus (G) ≈ R17 > R14 ≈ R21 > K13 > R36 > K6, as shown by NMR spectroscopy. Nanoparticle recognition of the larger protein Survivin was even more efficient and occurred with a KD of 8 ± 1 µM, as shown by ITC. We conclude that ultrasmall nanoparticles can act as versatile carriers for artificial protein ligands and strengthen their interaction with the complementary patches on the protein surface.

Genetic immunization against hepatitis B virus with calcium phosphate nanoparticles in vitro and in vivo.

Calcium phosphate nanoparticles were loaded with plasmid DNA and toll-like receptor ligands (TLR), i.e. CpG or flagellin, to activate antigen-presenting cells (APCs) like dendritic cells (DCs). The functionalized nanoparticles were studied in vitro on HeLa, C2C12 and BHK-21 cell lines, focusing on the expression of two specific proteins. EGFP-DNA, encoding for enhanced green fluorescent protein (EGFP), was used as a model plasmid to optimize the transfection efficiency in vitro by fluorescence microscopy and flow cytometry. Calcium phosphate nanoparticles loaded with TLR ligands and plasmid DNA encoding for the hepatitis B virus surface antigen (pHBsAg) were evaluated by in vitro and in vivo immunization experiments to identify a possible candidate for a prophylactic hepatitis B virus (HBV) vaccine. The nanoparticles induced a strong expression of HBsAg in the three cell lines. In splenocytes, the expression of the co-stimulatory molecules CD80 and CD86 was enhanced. After intramuscular injection in mice, the nanoparticles induced the expression of HBsAg, the antigen-specific T cell response, and the antigen-specific antibody response (IgG1). STATEMENT OF SIGNIFICANCE: Hepatitis B is one of the most frequent viral infections worldwide. For preventive immunization, nanoparticles can be used which carry both an adjuvant (a stimulatory molecule) and DNA encoding for a viral antigen. After administration of such nanoparticles to cells, they are taken up by cells where the DNA is transcribed into the viral antigen (a protein). This viral antigen is inducing a virus-specific immune response. This was shown both by in vitro cell culture as well as by an extensive in vivo study in mice.

A bioactive nano-calcium phosphate paste for in-situ transfection of BMP-7 and VEGF-A in a rabbit critical-size bone defect: results of an in vivo study.

The aim of this study was to prepare an injectable DNA-loaded nano-calcium phosphate paste that is suitable as bioactive bone substitution material. For this we used the well-known potential of calcium phosphate in bone contact and supplemented it with DNA for the in-situ transfection of BMP-7 and VEGF-A in a critical-size bone defect. 24 New Zealand white rabbits were randomly divided into two groups: One group with BMP-7- and VEGF-A-encoding DNA on calcium phosphate nanoparticles and a control group with calcium phosphate nanoparticles only. The bone defect was created at the proximal medial tibia and filled with the DNA-loaded calcium phosphate paste. As control, a bone defect was filled with the calcium phosphate paste without DNA. The proximal tibia was investigated 2, 4 and 12 weeks after the operation. A histomorphological analysis of the dynamic bone parameters was carried out with the Osteomeasure system. The animals treated with the DNA-loaded calcium phosphate showed a statistically significantly increased bone volume per total volume after 4 weeks in comparison to the control group. Additionally, a statistically significant increase of the trabecular number and the number of osteoblasts per tissue area were observed. These results were confirmed by radiological analysis. The DNA-loaded bone paste led to a significantly faster healing of the critical-size bone defect in the rabbit model after 4 weeks. After 12 weeks, all defects had equally healed in both groups. No difference in the quality of the new bone was found. The injectable DNA-loaded calcium phosphate paste led to a faster and more sustained bone healing and induced an accelerated bone formation after 4 weeks. The material was well integrated into the bone defect and new bone was formed on its surface. The calcium phosphate paste without DNA led to a regular healing of the critical-size bone defect, but the healing was slower than the DNA-loaded paste. Thus, the in-situ transfection with BMP-7 and VEGF-A significantly improved the potential of calcium phosphate as pasty bone substitution material.

Peculiarities in thermal evolution of precipitated amorphous calcium phosphates with an initial Ca/P ratio of 1:1.

Thermal evolution of amorphous calcium phosphate (ACP) powder from a fast nitrate synthesis with a Ca/P ratio of 1:1 were studied in the range of 20-980 °C. The powder consisted of amorphous dicalcium phosphate anhydrate (CaHPO4) after heating to 200 °C. CaHPO4 gradually condensed to amorphous calcium pyrophosphate Ca2P2O7 (CPP) between 200 to 620 °C. Amorphous CPP crystallized at 620-740 °C to a metastable polymorph α'-CPP of the high-temperature phase α-CPP and ß-CPP. The α'-CPP/ ß-CPP phase ratio reached a maximum at 800 °C (60 wt% α'-CPP/40 wt% ß-CPP), and α'-CPP gradually transformed to ß-CPP at a higher temperature. Some ß-TCP occurred at 900 °C, so that a three-phasic mixture was obtained in the powder heated to 980 °C. The occurrence of metastable α'-CPP is attributed to Ostwald's step rule, and a mechanism for ß-TCP formation is proposed. The advantages of prospective biomaterials from these powders are discussed.

Calcium phosphate nanoparticles show an effective activation of the innate immune response in vitro and in vivo after functionalization with flagellin.

For subunit vaccines, adjuvants play a key role in shaping the magnitude, persistence and form of targeted antigen-specific immune response. Flagellin is a potent immune activator by bridging innate inflammatory responses and adaptive immunity and an adjuvant candidate for clinical application. Calcium phosphate nanoparticles are efficient carriers for different biomolecules like DNA, RNA, peptides and proteins. Flagellin-functionalized calcium phosphate nanoparticles were prepared and their immunostimulatory effect on the innate immune system, i.e. the cytokine production, was studied. They induced the production of the proinflammatory cytokines IL-8 (Caco-2 cells) and IL-1ß (bone marrow-derived macrophages; BMDM) in vitro and IL-6 in vivo after intraperitoneal injection in mice. The immunostimulation was more pronounced than with free flagellin.

The type of adjuvant strongly influences the T-cell response during nanoparticle-based immunization.

Potent vaccines require the ability to effectively induce immune responses. Especially for the control of infectious diseases with intracellular pathogens, like viruses or bacteria, potent T-cell responses are indispensable. Several delivery systems such as nanoparticles have been considered to boost the immunogenicity of pathogen derived peptides or subunits for the induction of potent T-cell responses. Since they can be further functionalized with immunostimulants, like Toll-like receptor (TLR) agonists, they improve the response by enhanced activation of the innate immune system. Currently, TLR agonists like unmethylated CpG oligonucleotides and the synthetic dsRNA derivate polyriboinosinic acid-polyribocytidylic acid (poly[I:C]) are widely used as vaccine adjuvants. CpG and poly(I:C) trigger different TLRs and therefore show differential signal transduction. Recently, we established biodegradable calcium phosphate (CaP) nanoparticles as potent T cell inducing vaccination vehicles. In this commentary we discuss the role of CpG and poly(I:C) for the effective induction of virus-specific T cells during immunization with CaP nanoparticles. The presented results underline the importance of the right formulation of vaccines for specific immunization purpose.

Immunization with biodegradable nanoparticles efficiently induces cellular immunity and protects against influenza virus infection.

The ability of vaccines to induce T cell responses is crucial for preventing diseases caused by viruses or bacteria. Nanoparticles (NPs) are considered an efficient tool for inducing potent immune responses. In this study, we describe a novel vaccination approach with biodegradable calcium phosphate (CaP) NPs that serve as carrier of immunoactive TLR9 ligand (CpG) combined with a viral Ag from the influenza A virus hemagglutinin. Functionalized CaP NPs were efficiently taken up by dendritic cells in vivo and elicited a potent T cell-mediated immune response in immunized mice with high numbers of IFN-γ-producing CD4(+) and CD8(+) effector T cells. Most importantly, both i.p. and intranasal immunization with these NPs offered protection in a mouse model of influenza virus infection. This study demonstrates the great potential of CaP NPs as a novel vaccination tool that offers substantial flexibility for several infection models.

Synthetic pathways to make nanoparticles fluorescent.

In biosciences, it is often necessary to follow the pathway of nanoparticles within cells or tissues. The nanoparticles can be used as labeled sensors which may, e.g., address functionalities within a cell, carry other specific agents like drugs or be magnetic for tumor thermotherapy. In the context of nanotoxicology, the fate of a given nanoparticle is of interest. As many methods in cell biology are based on fluorescence detection, there is a strong demand to make nanoparticles fluorescent. Different ways to introduce fluorescence are reviewed and exemplified with typical kinds of nanoparticles, i.e. polymers, silica and calcium phosphate.

A solid-state NMR investigation of the structure of nanocrystalline hydroxyapatite.

Nanocrystalline hydroxyapatite (HAp) prepared by a precipitation route was investigated. The X-ray diffraction (XRD) powder patterns of the elongated nanocrystals with a typical diameter of about 10 nm and length of 30-50 nm (by transmission electron microscopy (TEM)) revealed the presence of HAp with significantly broadened XRD reflections. However, Ca deficiency was found, as the Ca/P ratio was 1.5 only (so-called calcium-deficient hydroxyapatite (CDHA)), and not 1.67. This Ca deficiency of nanocrystalline HAp is explained using NMR. It is shown unambiguously that (i) the nanocrystals consist of a crystalline core and a (disordered) surface region with a relative phosphate content of about 1:1, (ii) the crystalline core is HAp, and (iii) the surface region is dominated by hydrogen phosphate anions (with no hydroxyapatite-like structural motif) and structural water (hydrate). From the relative phosphate content and taking into account the crystal shape, the thickness of the surface layer along the main crystal axis could be estimated to be about 1 nm, and the average chemical composition of the surface layer has been determined. Finally, a Ca/P ratio of 1.52 was estimated from the NMR data that compares well with the value of 1.51 from chemical analysis. The important consequences are that the surface of nanocrystalline HAp has nothing in common with the bulk composition and that the chemistry of such materials (e.g. the binding of protein molecules to phosphate surfaces) must be reconsidered.

Application of synchrotron-radiation-based computer microtomography (SRICT) to selected biominerals: embryonic snails, statoliths of medusae, and human teeth.

Synchrotron-radiation-based computer microtomography (SRmicroCT) was applied to three biomineralised objects First, embryonic snails of the freshwater snail Biomphalaria glabrata, second, rhopalia (complex sense organs) of the medusa Aurelia aurita, and third, human teeth. The high absorption contrast between the soft tissue and mineralised tissues, i.e. the shell in the first case (consisting of calcium carbonate) and the statoliths in the second case (consisting of calcium sulphate hemihydrate), makes this method ideal for the study of biomineralised tissues. The objects can be non-destructively studied on a micrometre scale, and quantitative parameters like the thickness of a forming a snail shell or statolith crystal sizes can be obtained on a length scale of 1-2 mum. Using SRmicroCT, the dentin-enamel border can be clearly identified in X-ray dense teeth.