Elucidating the structural, catalytic, and antibacterial traits of Ficus carica and Azadirachta indica leaf extract-mediated synthesis of the Ag/CuO/rGO nanocomposite.

The present exploration demonstrates the efficient, sustainable, cost-effective, and environment-friendly green approach for the synthesis of silver (Ag)-doped copper oxide (CuO) embedded with reduced graphene oxide (rGO) nanocomposite using the green one-pot method and the green deposition method. Leaf extracts of Ficus carica and Azadirachta indica were used for both methods as reducing and capping agents. The effect of methodology and plant extract was analyzed through different characterization techniques such as UV-visible spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), x-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM). The lowest band gap of 3.0 eV was observed for the Ag/CuO/rGO prepared by the green one-pot method using F. carica. The reduction of graphene oxide (GO) and the formation of metal oxide was confirmed through functional group detection using FT-IR. Calculation of thermodynamic parameters showed that all reactions involved were nonspontaneous and endothermic which shows the stability of nanocomposites. XRD studies revealed the crystallinity, phase purity and small average crystallite size of 32.67 nm. SEM images disclosed that the morphology of the nanocomposites was spherical with agglomeration and rough texture. The particle size of the nanocomposites calculated through HRTEM was found in agreement with the XRD results. The numerous properties of the synthesized nanocomposites enhanced their potential against the degradation of methylene blue, rhodamine B, and ciprofloxacin. The highest percentage degradation of Ag/CuO/rGO was found to be 97%, synthesized using the green one-pot method with F. carica against ciprofloxacin, which might be due to the lowest band gap, delayed electron-hole pair recombination, and large surface area available. The nanocomposites were also tested against the Gram-positive and Gram-negative bacteria. RESEARCH HIGHLIGHTS: Facile synthesis of Ag/CuO/rGO nanocomposite using a green one-pot method and the green deposition method. The lowest band gap of 3.0 eV was observed for nanocomposite prepared by a green one-pot method using Ficus carica. Least average crystallite size of 32.67 nm was found for nanocomposite prepared by a green one-pot method using F. carica. Highest antibacterial and catalytic activity (97%) was obtained against ciprofloxacin with nanocomposite prepared through green one-pot method using F. carica. A mechanism of green synthesis is proposed.

In-vivo (Albino Mice) and in-vitro Assimilation and Toxicity of Zinc Oxide Nanoparticles in Food Materials.

Purpose: Recent advances in nanotechnology have given rise to the potential utilization of nanoparticles as food, nano-medicine/biomedicines. Patient: The study aimed to investigate the effects of nano-zinc oxide (nano-zinc) on the bio-assimilation of mineral (Zn) in mice, aged 3-6 weeks. Methods: ZnO nanoparticles were added to the basal diet as a supplement at amounts of 0.07, 0.14 and 0.21 mg/kg. The synthesized material was characterized by Fourier transform infrared spectrophotometer, particle size, scanning electron microscope, Thermogravimetric Analysis Thermal, X-ray diffraction spectrophotometer and Zeta potential. Results: In-vitro bioavailability of synthesized group ZnO (120 nm) was 43%, whereas for standard group ZnO (50 nm) was reported as 55%. In-vivo bioavailability of zinc oxide illustrated the maximum absorption level compared with the control. In-vivo toxicity was characterized as damage done to the liver and spleen tissues with a high dose of 0.21 mg/kg, while smaller doses indicated no toxic effects. Conclusion: The study provided important insights on the toxicological effects of ZnO nanoparticles, depending on dose rate and bio-assimilation, as well as particles, under various conditions (in-vitro and in-vivo). These findings will motivate further detailed research on nano-based medicine for alleviating malnutrition conditions.

Metal nanoparticles assisted revival of Streptomycin against MDRS Staphylococcus aureus.

The ability of microorganisms to generate resistance outcompetes with the generation of new and efficient antibiotics. Therefore, it is critically required to develop novel antibiotic agents and treatments to control bacterial infections. Green synthesized metallic and metal oxide nanoparticles are considered as the potential means to target bacteria as an alternative to antibiotics. Nanoconjugates have also attracted attention because of their increased biological activity as compared to free antibiotics. In the present investigation, silver nanoparticles (AgNPs), zinc oxide nanoparticles (ZnO NPs), copper oxide nanoparticles (CuO NPs), and iron oxide nanoparticles (FeO NPs) have been synthesized by using leaf extract of Ricinus communis. Characterization of nanoparticles was done by using UV-Vis Spectroscopy, Fourier Transform Infrared Spectroscopy, Scanning Electron Microscopy, Energy Dispersive X-Ray Analyzer, X-ray Diffraction Analysis, and Dynamic Light Scattering Particle Size Analyzer. Interestingly, Streptomycin when combined with AgNPs, ZnO NPs, CuO NPs, and FeO NPs showed enhanced antibacterial activity against clinical isolates of S. aureus which suggested synergism between the nanoparticles and antibiotics. The highest enhanced antibacterial potential of Streptomycin was observed in conjugation with ZnO NPs (11 ± 0.5 mm) against S. aureus. Minimum inhibitory concentration of conjugates of AgNPs, ZnO NPs, CuO NPs, and FeO NPs with streptomycin against S. aureus was found to be 3.12, 2.5,10, and 12.5 µg/mL respectively. The considerable point of the present investigation is that S. aureus, which was resistant to streptomycin becomes highly susceptible to the same antibiotic when combined with nanoparticles. This particular observation opens up windows to mitigate the current crisis due to antibiotic resistance to combat antimicrobial infections efficiently.

Micelle-assisted synthesis of Al2O3·CaO nanocatalyst: optical properties and their applications in photodegradation of 2,4,6-trinitrophenol.

Calcium oxide (CaO) nanoparticles are known to exhibit unique property due to their high adsorption capacity and good catalytic activity. In this work the CaO nanocatalysts were prepared by hydrothermal method using anionic surfactant, sodium dodecyl sulphate (SDS), as a templating agent. The as-synthesized nanocatalysts were further used as substrate for the synthesis of alumina doped calcium oxide (Al2O3·CaO) nanocatalysts via deposition-precipitation method at the isoelectric point of CaO. The Al2O3·CaO nanocatalysts were characterized by FTIR, XRD, TGA, TEM, and FESEM techniques. The catalytic efficiencies of these nanocatalysts were studied for the photodegradation of 2,4,6-trinitrophenol (2,4,6-TNP), which is an industrial pollutant, spectrophotometrically. The effect of surfactant and temperature on size of nanocatalysts was also studied. The smallest particle size and highest percentage of degradation were observed at critical micelle concentration of the surfactant. The direct optical band gap of the Al2O3·CaO nanocatalyst was found as 3.3 eV.