Esculin induces endoplasmic reticulum stress and drives apoptosis and ferroptosis in colorectal cancer via PERK regulating eIF2α/CHOP and Nrf2/HO-1 cascades.

ETHNOPHARMACOLOGICAL RELEVANCE: Cortex fraxini (also known as Qinpi), the bark of Fraxinus rhynchophylla Hance and Fraxinus stylosa Lingelsh, constitutes a crucial component in several traditional Chinese formulas (e.g., Baitouweng Tang, Jinxiao Formula, etc.) and has demonstrated efficacy in alleviating intestinal carbuncle and managing diarrhea. Cortex fraxini has demonstrated commendable anticancer activity in the realm of Chinese ethnopharmacology; nevertheless, the underlying mechanisms against colorectal cancer (CRC) remain elusive. AIM OF THE STUDY: Esculin, an essential bioactive compound derived from cortex fraxini, has recently garnered attention for its ability to impede viability and induce apoptosis in cancer cells. This investigation aims to assess the therapeutic potential of esculin in treating CRC and elucidate the underlying mechanisms. MATERIALS AND METHODS: The impact of esculin on CRC cell viability was assessed using CCK-8 assay, Annexin V/PI staining, and Western blotting. Various cell death inhibitors, along with DCFH-DA, ELISA, biochemical analysis, and Western blotting, were employed to delineate the modes through which esculin induces HCT116 cells death. Inhibitors and siRNA knockdown were utilized to analyze the signaling pathways influenced by esculin. Additionally, an azomethane/dextran sulfate sodium (AOM/DSS)-induced in vivo CRC mouse model was employed to validate esculin's potential in inhibiting tumorigenesis and to elucidate its underlying mechanisms. RESULTS: Esculin significantly suppressed the viability of various CRC cell lines, particularly HCT116 cells. Investigation with diverse cell death inhibitors revealed that esculin-induced cell death was associated with both apoptosis and ferroptosis. Furthermore, esculin treatment triggered cellular lipid peroxidation, as evidenced by elevated levels of malondialdehyde (MDA) and decreased levels of glutathione (GSH), indicative of its propensity to induce ferroptosis in HCT116 cells. Enhanced protein levels of protein kinase R (PKR)-like endoplasmic reticulum kinase (PERK) and p-eIF2α suggested that esculin induced cellular endoplasmic reticulum (ER) stress, subsequently activating the Nrf2/ARE signaling pathway and initiating the transcriptional expression of heme oxygenase (HO)-1. Esculin-induced excessive expression of HO-1 could potentially lead to iron overload in HCT116 cells. Knockdown of Ho-1 significantly attenuated esculin-induced ferroptosis, underscoring HO-1 as a critical mediator of esculin-induced ferroptosis in HCT116 cells. Furthermore, utilizing an AOM/DSS-induced colorectal cancer mouse model, we validated that esculin potentially inhibits the onset and progression of colon cancer by inducing apoptosis and ferroptosis in vivo. CONCLUSIONS: These findings provide comprehensive insights into the dual induction of apoptosis and ferroptosis in HCT116 cells by esculin. The activation of the PERK signaling pathway, along with modulation of downstream eIF2α/CHOP and Nrf2/HO-1 cascades, underscores the mechanistic basis supporting the clinical application of esculin on CRC treatment.

[Reflections on good manufacturing practice and quality control system of personalized traditional Chinese medicine preparations].

Personalized traditional Chinese medicine(TCM) preparations have entered a stage of rapid development. The key to the healthy development of this industry is to establish a sound manufacturing standard and quality control system. This paper analyzed the characteristics of personalized TCM preparations and drew reference from the quality management standards in the production of commissioned decoctions and oral pastes, on the basis of which the production quality management scheme and cautions for the safe production of personalized TCM preparations was put forward with consideration to various problems that may exist and occur in the production of such preparations. It provided references for formulating the production standards and quality management system of personalized TCM preparations. The production standards and quality control system should develop with the times. In the future, modern technologies such as big data and artificial intelligence should be employed to achieve the automated and intelligent production and establish a sound quality traceability system, online control strategy, and safety management mode of personalized TCM preparations, which will ensure the healthy development of this industry under requirement of good manufacturing practice(GMP).

[Optimization of prediction model for personalized water pills based on semantic analysis of traditional Chinese medicine materials].

This study aims to optimize the prediction model of personalized water pills that has been established by our research group. Dioscoreae Rhizoma, Leonuri Herba, Codonopsis Radix, Armeniacae Semen Amarum, and calcined Oyster were selected as model medicines of powdery, fibrous, sugary, oily, and brittle materials, respectively. The model prescriptions were obtained by uniform mixing design. With hydroxypropyl methylcellulose E5(HPMC-E5) aqueous solution as the adhesive, personalized water pills were prepared by extrusion and spheronizaition. The evaluation indexes in the pill preparation process and the multi-model statistical analysis were employed to optimize and evaluate the prediction model of personalized water pills. The prediction equation of the adhesive concentration was obtained as follows: Y_1=-4.172+3.63X_A+15.057X_B+1.838X_C-0.997X_D(adhesive concentration of 10% when Y_1<0, and 20% when Y_1>0). The overall accuracy of the prediction model for adhesive concentration was 96.0%. The prediction equation of adhesive dosage was Y_2=6.051+94.944X_A~(1.5)+161.977X_B+70.078X_C~2+12.016X_D~(0.3)+27.493X_E~(0.3)-2.168X_F~(-1)(R~2=0.954, P<0.001). Furthermore, the semantic prediction model for material classification of traditional Chinese medicines was used to classify the materials contained in the prescription, and thus the prediction model of personalized water pills was evaluated. The results showed that the prescriptions for model evaluation can be prepared with one-time molding, and the forming quality was better than that established by the research group earlier. This study has achieved the optimization of the prediction model of personalized water pills.

[Composite excipients for preparing concentrated water pills of personalized traditional Chinese medicine prescriptions by extruding-rounding method].

This study aims to optimize the composite excipients suitable for the preparation of concentrated water pills of personalized traditional Chinese medicine prescriptions by the extruding-rounding method and investigate the roles of each excipient in the preparation process. The fiber materials and powder materials were taken as the standard materials suitable as excipients in the preparation of personalized concentrated water pills without excipient. Water absorption properties and torque rheology were used as indicators for selecting the materials of composite excipients. The ratio of composite excipients was optimized by D-optimal mixture design. Moreover, to demonstrate the universal applicability of the optimal composite excipients, this study selected three traditional Chinese medicine prescriptions with low, medium, and high extraction rates to verify the optimal ratio. Finally, the effects of each selected excipient on the molding of personalized concentrated water pills were investigated with the four parameters of the pill molding quality as indicators. The optimized composite excipients were dextrin∶microcrystalline cellulose(MCC)∶low-substituted hydroxypropyl cellulose(L-HPC) at a ratio of 1∶2∶4. The composite excipients were used for the preparation of personalized concentrated water pills with stable process, good quality, and a wide range of application. Dextrin acted as a diluent and accelerated the speed of extruding. MCC mainly served as an adhesive, increasing the cohesion and viscosity of the pills. L-HPC as a water absorbent and disintegrating agent can absorb and hold the water of the concentrate and has a strong disintegration effect.

[Research practice and development direction of intelligent manufacturing of presonalized traditional Chinese medicine preparations].

In recent years, as people's living standards continue to improve, and the pace of life accelerates dramatically, the demand and quality of traditional Chinese medicine(TCM) services from patients continue to rise. As an essential supplement to the existing forms of TCM application, such as Chinese patent medicine, decoction, and formulated granules, presonalized TCM preparations is facing an increasing market demand. Currently, manual and semi-mechanized production are the primary production ways in presonalized TCM preparations. However, the production process control level is low, and digitalization and informatization need to be improved, which restricts the automated and intelligent development of presonalized TCM preparations. Presonalized TCM preparations faces a significant opportunity and challenge in integrating with intelligent manufacturing through research and development of intelligent equipment and core technology. This paper overviews the connotation and characteristics of intelligent manufacturing and summarizes the application of intelligent manufacturing technologies such as "Internet of things" "big data", and "artificial intelligence" in the TCM industry. Based on the innovative research and development model of "intelligent classification of TCM materials, intelligent decision making of prescription and process, and online control and intelligent production" of presonalized TCM preparations, the research practice and achievements from our research group in the field of intelligent manufacturing of presonalized TCM preparations are introduced. Ultimately, the paper proposes the direction for developing intelligent manufacturing of presonalized TCM preparations, which will provide a reference for the research and application of automation and intelligence of presonalized TCM preparations.

[Application of microwave vacuum drying with process management in extract drying of personalized traditional Chinese medicine preparations].

Extracts are important intermediates in the production of traditional Chinese medicines preparations. The drying effect of extracts will directly affect the subsequent production process and the quality of the preparation. To meet the requirements of high drug loading, short time consumption, and simple production process of personalized traditional Chinese medicine preparations, this study explored the application of multi-program microwave vacuum drying process in the extract drying of personalized traditional Chinese medicine preparations. The influencing factors of microwave vacuum drying process were investigated for 5 excipients and 40 prescriptions. Taking the feasibility of drying, drying rate, drying time, and dried extract status as indicators, this study investigated the feeding requirements of microwave vacuum drying. With the dried extract status as the evaluation indicator, the three drying programs(A, B, and C) were compared to obtain the optimal drying condition. The experimental results showed that the optimal feeding conditions for microwave vacuum drying were material layer thickness of 2 cm and C program(a total of 7 drying processes), which solved the problem of easy scorching in microwave drying with process management. Furthermore, the preset moisture content of the dried extract in microwave drying should be 4%-5%, so that the dried extract of traditional Chinese medicine preparation had uniform quality, complete drying, and no scorching. This study lays a foundation for the application of microwave drying in the production of traditional Chinese medicine preparations, promoting the high-quality development of personalized traditional Chinese medicine preparations.

[Molding law of traditional Chinese medicine gel plaster based on physicochemical properties of raw materials and intermediates].

This paper aims to study the correlation between the physicochemical properties of raw materials and intermediates and the molding quality and law of traditional Chinese medicine(TCM) gel plaster by using TCM slices and powder as raw materials. 48 TCM compounds are selected as model prescriptions to prepare gel plasters. The rotational rheometer is used to determine the rheological parameters of the plaster, including storage modulus(G'), loss modulus(G″), yield stress(τ), and creep compliance [J(t)]. The molding quality of the prepared TCM gel plaster is evaluated by subjective and objective measures. Clustering and principal component analysis are conducted to evaluate the physical properties of the plaster. By measuring the rheological properties of the plaster, the molding quality of the TCM gel plaster can be predicted, with an accuracy of 83.72% after seven days of modeling and 88.37% after 30 days of modeling. When the parameters such as G' and G″ of the plaster are large, and the [J(t)] is small, the molding quality of the plaster is better. When the plaster coating point is no less than 3, it is difficult to be coated. In addition, when the proportion of metal ions in the prescription is higher, the 30-day forming quality of the plaster is mainly affected, and the viscosity of the plaster is poor. If the prescription contains many acidic chemical components, the 7-day forming quality of the plaster is mainly affected, with many residuals. The results suggest that the rheological properties of the plaster can be used to predict the molding quality of TCM slice and powder gel plaster. It can provide a reference for the development of TCM gel plaster prescriptions.

[Intelligent material classification of traditional Chinese medicine based on semantic analysis].

A method for material classification of traditional Chinese medicines based on the physical properties of powder has been established by our research group. This method involves pre-treatment of traditional Chinese medicine decoction pieces, powder preparation, and determination of physical properties, being cumbersome. In this study, the word segmentation logic of semantic analysis was adopted to establish the thesaurus and local standardized semantic word segmentation database with the macroscopic and microscopic characteristics of 36 model traditional Chinese medicines as the basic data. The physical properties of these medicines have been determined and the classification of these medicines is clear in the cluster analysis. A total of 55 keywords for powdery, fibrous, sugary, oily, and brittle materials were screened by association rules and the set inclusion and exclusion criteria, and the weights of the keywords were calculated. Furthermore, the algorithms of the keyword matching scores and the computation rules of the single or multiple material classification were established for building the intelligent model of semantic analysis for the material classification. The semantic classification results of the other 35 TCMs except Pseudostellariae Radix(multi-material medicine) agreed with the clustering results based on the physical properties of the powder, with an agreement rate of 97.22%. In model validation, the prediction results of semantic classification of traditional Chinese medicines were consistent with the clustering results based on the physical properties of powder, with an agreement rate of 83.33%. The results showed that the method of material classification based on semantic analysis was feasible, which laid a foundation for the development of intelligent decision-making technology for personalized traditional Chinese medicine preparations.

[Molding matrix formulation of hot-melt pressure-sensitive adhesive plaster of personalized traditional Chinese medicine preparations].

This study aims to optimize the matrix formulation for the hot-melt pressure-sensitive adhesive plaster of personalized traditional Chinese medicine(TCM) preparations and verify the applicability of the formulation. The central composite design in JMP Pro 16.1.0 was employed to optimize the dosages of styrene-isoprene-styrene triblock copolymer(SIS), hydrogenated petroleum resin, and lightweight liquid paraffin, with the fine powder of Yipifang as the model drug(drug loading of 10%) and the sensory score and objective evaluation as the comprehensive evaluation indicators. The quality evaluation system of hot-melt pressure-sensitive adhesive plaster of personalized TCM preparations was established. The applicability of the optimized matrix formulation of hot-melt pressure-sensitive adhesive plaster was verified with 16 TCM preparations for external application. Furthermore, the applicability of the matrix formulation was investigated with different drug loadings. The general molding matrix formulation was SIS∶hydrogenated petroleum resin∶lightweight liquid paraffin 3∶3∶5. The optimized matrix formulation showed good molding properties and high quality scores for 16 TCM preparations and were suitable for the plastering of finely powdered decoction pieces with a loading capacity of 10% to 30%. The results suggest that the optimized matrix formulation has good applicability and is suitable for TCM preparations. The findings lay a foundation for the application and promotion of the hot-melt pressure-sensitive adhesive plasters of personalized TCM preparations.

[Preparation process selection of presonalized traditional Chinese medicine concentrated watered pills containing heat-unstable components].

In the process of preparing presonalized concentrated watered pills, the decoction needs to be concentrated by heat and mixed with medicinal slices or powder to prepare a wet mass. However, some of the traditional Chinese medicine(TCM) components are easily decomposed or transformed by heat. In order to optimize the preparation process of presonalized TCM concentrated watered pills and reduce the loss of heat-unstable components in prescriptions, this study uses five compound TCM prescriptions containing heat-unstable components as model prescriptions, namely the Linggui Zhugan Formula, Xiaochengqi Formula, Sanpian Formula, Xiaoer Qixing Formula, and Xiaoyao Formula. Based on the two kinds of preparation process of presonalized concentrated watered pills previously established by our research group, whole extract concentrated watered pills and concentrated watered pills without excipients are prepared, respectively. Characteristic maps are measured and compared with those of the corresponding decoction. The results show that the characteristic maps of the concentrated watered pills without excipients of the five model prescriptions are very close to those of the decoction, and the number of characteristic peaks and peak areas are higher than those of whole extract concentrated watered pills. In addition, the peak area of some peaks is higher than that of the corresponding decoction. Thus, it is recommended to select the preparation process of prescription-based concentrated watered pills without excipients based on the "unification of medicines and excipients" to preserve those heat-unstable components more effectively when the prescription contains a heat-unstable component of TCM. This study provides a basis for the subsequent reasonable development and application of presonalized TCM pills.

Effect of hydrocolloids on starch digestion: A review.

Rapidly digestible starch can increase postprandial blood sugar rapidly, which can be overcome by hydrocolloids. The paper aims to review the effect of hydrocolloids on starch digestion. Hydrocolloids used to reduce starch digestibility are mostly polysaccharides like xanthan gum, pectin, ß-glucan, and konjac glucomannan. Their effectiveness is related to their source and structure, mixing mode of hydrocolloid/starch, physical treatment, and starch processing. The mechanisms of hydrocolloid action include increased system viscosity, inhibition of enzymatic activity, and reduced starch accessibility to enzymes. Reduced starch accessibility to enzymes involves physical barrier and structural orderliness. In the future, physical treatments and intensity used for stabilizing hydrocolloid/starch complex, risks associated with different doses of hydrocolloids, and the development of related clinical trials should be focused on. Besides, investigating the effect of hydrocolloids on starch should be conducted in the context of practical commercial applications rather than limited to the laboratory level.

Design and synthesis of forsythin derivatives as anti-inflammatory agents for acute lung injury.

Acute lung injury (ALI) is a clinically high mortality disease, which has not yet been effectively treated. The development of anti-ALI drugs is imminent. ALI can be effectively treated by inhibiting the inflammatory cascade and reducing the inflammatory response in the lung. Forsythia suspense is a common Chinese herbal medicine with significant anti-inflammatory activity. Using forsythin as the parent, 27 Forsythin derivatives were designed and synthesized, and the anti-AIL activity of these compounds was evaluated. Among them, compound B5 has the best activity to inhibit the release of IL-6, and the inhibition rate reaches 91.79% at 25 µM, which was 7.5 times that of the parent forsythin. In addition, most of the compounds have no significant cytotoxicity in vitro. Further studies showed that compound B5 had a concentration-dependent inhibitory effect on NO, IL-6 and TNF-α. And the IC50 values of compound B5 for NO and IL-6 are 10.88 µM and 4.93 µM, respectively. We also found that B5 could significantly inhibit the expression of some immune-related cytotoxic factors, including inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2). In addition, B5 inhibits NF-κB/MAPK signaling pathway. In vivo experiments showed that B5 could alleviate lung inflammation in LPS-induced ALI mice and inhibit IL-6, TNF-α, COX-2 and iNOS. In summary, B5 has anti-inflammatory effects and alleviates ALI by regulating inflammatory mediators and inhibiting MAPK and NF-κB signaling pathways.

New steroidal saponins from the aerial parts of Paris polyphylla var. yunnanensis and their effects on blood coagulation.

Five new steroidal saponins, paripolins D-H (1-5), and 6 known compounds (6-11) were isolated from the aerial parts of Paris polyphylla var. yunnanensis. The structures of 1-5 were determined using spectroscopic analyses in conjunction with acid hydrolysis. It is for the first time to report the 12-hydroxysteroidal saponins from the genus Paris. The effect of all isolated compounds on blood coagulation was determined in vitro using the plasma recalcification time method. Compounds 1 and 2 showed potent procoagulant activity, and 5-11 exhibited significant anticoagulant activity.

The substitution sites of hydroxyl and galloyl groups determine the inhibitory activity of human pancreatic α-amylase in twelve tea polyphenol monomers.

Tea polyphenols have been reported as potential α-amylase inhibitors. However, the quantitative structure-activity relationship (QSAR) between tea polyphenols and human pancreas α-amylase (HPA) is not well understood. Herein, the inhibitory effect of twelve tea polyphenol monomers on HPA was investigated in terms of inhibitory activity, as well as QSAR analysis and interaction mechanism. The results revealed that the HPA inhibitory activity of theaflavins (TFs), especially theaflavin-3'-gallate (TF-3'-G, IC50: 0.313 mg/mL), was much stronger than that of catechins (IC50: 18.387-458.932 mg/mL). The QSAR analysis demonstrated that the determinant for the inhibitory activity of HPA was not the number of hydroxyl and galloyl groups in tea polyphenol monomers, while the substitution sites of these groups potentially might play a more important role in modulating the inhibitory activity. The inhibition kinetics and molecular docking revealed that TF-3'-G as a mixed-type inhibitor had the lowest inhibition constant and bound to the active sites of HPA with the lowest binding energy (-7.74 kcal/mol). These findings could provide valuable insights into the structures-activity relationships between tea polyphenols and the HPA inhibitors.

Preparation methods, structural characteristics, and biological activity of polysaccharides from Platycodon grandiflorus.

Platycodon grandiflorus (P. grandiflorus), a traditional Chinese medicinal herb used for both medicine and food, has a long history of treating respiratory infections, bronchitis, pneumonia, and other lung-related diseases. The therapeutic effects of P. grandiflorus are attributed to its chemical components, including polysaccharides. Among these components, Platycodon grandiflorus polysaccharides (PGP) are recognized as one of the most important and abundant active ingredients, exhibiting various biological activities such as prebiotic, antioxidant, antiviral, anticancer, antiangiogenic, and immune regulatory properties. Incorporating the principles of traditional Chinese medicine, carrier concepts, and modern targeted drug delivery technologies, PGP can influence the target sites and therapeutic effects of other drugs while also serving as a drug carrier for targeted and precise treatments. Therefore, it is essential to provide a comprehensive review of the extraction, separation, purification, physicochemical properties, and biological activities of PGP. In the future, by integrating new concepts, technologies, and processes, further references and guidance can be provided for the comprehensive development of PGP. This will contribute to the advancement of P. grandiflorus in various fields such as pharmaceuticals, health products, and food.

Mulberry leaf multi-components exert hypoglycemic effects through regulation of the PI-3K/Akt insulin signaling pathway in type 2 diabetic rats.

ETHNOPHARMACOLOGICAL RELEVANCE: Phytochemicals have unique advantages in the treatment of diabetes due to their multi-target activity and low toxicity. Mulberry leaves, a traditional Chinese herbal medicine, have been used in the prevention and treatment of diabetes for centuries. The main active ingredients in mulberry leaves with regards to the hypoglycemic effect are 1-deoxynojirimycin, flavonoids, and polysaccharides. However, the combined hypoglycemic effects and mechanisms of mulberry leaf multi-components remain unclear. AIM OF THE STUDY: This study explored the anti-diabetic effects of mulberry leaf multi-components (MMC) and the role of the PI-3K/Akt insulin signalling pathway in improving insulin resistance. MATERIALS AND METHODS: The main chemical components of MMC were analyzed using the phenol-sulfuric acid method, aluminum nitrate-sodium nitrite method, and HPLC-ultraviolet/fluorescence detection method. The T2DM rat model was created via feeding a high-fat diet and peritoneal injection of streptozotocin. T2DM rats were divided into four groups: model, model plus metformin, model plus low-dose, and model plus high-dose MMC groups (100 and 200 mg/kg body weight/day, respectively), and plus normal group for a total of five groups. MMC was administered by oral gavage for six weeks. Fasting blood glucose and serum lipid profiles were measured using a glucometer and an automatic biochemistry analyzer, respectively. Serum insulin and adipocytokine levels were analyzed by ELISA. Hepatic glucose metabolizing enzyme activity was evaluated by ELISA and the double antibody sandwich method. Expression of PI-3K/Akt signalling pathway proteins was analyzed by RT-PCR and Western blotting. RESULTS: Extracted 1-deoxynojirimycin, flavonoid, and polysaccharide purity was 70.40%, 52.34%, and 32.60%, respectively. These components were then mixed at a ratio of 1:6:8 to form MMC. MMC significantly reduced serum glucose, insulin, and lipid levels. In diabetic rats, MMC enhanced insulin sensitivity and alleviated inflammatory and oxidative damage by lowing adipocytokine levels and increasing anti-oxidative enzyme activity. Insulin resistance was also mitigated. MMC regulated the activity of key downstream enzymes of hepatic glucose metabolism via activating the expression of PI-3K, Akt, PDX-1, and GLUT4 at the mRNA and protein levels, thereby correcting hepatic glucolipid metabolism disorders and exerting a hypoglycemic effect. CONCLUSION: MMC ameliorated hepatic glucolipid metabolism disorders and improved insulin resistance in T2DM rats by activating the PI-3K/Akt signaling pathway. These results highlight the multi-component, multi-target, and combined effects of MMC, and suggest it may be further developed as a hypoglycemic drug.

Short-term and long-term effectiveness of acupuncture and Tuina on knee osteoarthritis: study protocol for a randomized controlled trial.

Background: The effectiveness of acupuncture and tuina in treating knee osteoarthritis (KOA) is still controversial, which limits their clinical application in practice. This study aims to evaluate the short-term and long-term effectiveness of acupuncture and tuina on KOA. Methods/design: This parallel-group, multicenter randomized clinical trial (RCT) will be conducted at the outpatient clinic of five traditional Chinese medicine hospitals in China. Three hundred and thirty participants with KOA will be randomly assigned to acupuncture, tuina, or home-based exercise group with a ratio of 1:1:1. The primary outcome is the proportion of participants achieving a minimal clinically important improvement defined as a ≥ 12% reduction on the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) pain dimension on short term (week 8) and long term (week 26) compared with baseline. Secondary outcomes are knee joint conditions (pain, function, and stiffness), self-efficacy of arthritis, quality of life, and psychological conditions, which will be evaluated by the WOMAC score and the Patient Global Assessment (PGA), and in addition, the respondents index of OMERACT-OARSI, Short Form 12 Health Survey (SF-12), arthritis self-efficacy scale, and European five-dimensional health scale (EQ-5D). Adverse events will be collected by self-reported questionnaires predefined. Clinical trial registration: https://www.chictr.org.cn.

A bibliometric and thematic analysis of the trends in the research on ginkgo biloba extract from 1985 to 2022.

Background: Ginkgo biloba extract (GBE), a complementary and alternative medicine, has been widely used for disorders such as brain infarction, dementia, and coronary heart disease, in recent decades. Given its widespread clinical use, GBE has always been a vital research topic. However, there are no bibliometric analyses on this topic; furthermore, published reviews of GBE focus only on a specific research field or lack scientific and systematic evaluation. This study combined bibliometrics with thematic reviews by visual analysis to identify the current status of GBE research and to better identify research hotspots and trends in the past 40 years to understand future developments in basic and clinical research. Methods: Articles and reviews on GBE were retrieved by topic from the Web of Science Core Collection from inception to 2022.12.01. Countries, institutions, authors, journals, references, and keywords in the field were visually analyzed using CiteSpace, Scimago Graphica, and VOSviewer software; then, these visualization results for references and keywords were clarified in detail by thematic reviews in subdivisions of the fields. Results: In total, 2015 publications were included. The GBE-related literature has high volumes of publications and citations. The majority of literature is from China, and the USA cooperates most closely with other countries. In GBE research, Christen Yves is the most cited author, Phytotherapy Research is the most prolific journal, and the Journal of Ethnopharmacology is the most co-cited journal. Through a comprehensive analysis of keywords, references, and reviews, the quality of the meta-analysis of randomized controlled clinical trials of GBE in treating dementia was evaluated by the Risk of Bias in Systematic Reviews scale (ROBIS). Current research on GBE focuses on its pharmacological mechanisms, and neuroprotective application in diseases such as Alzheimer's disease, and glaucoma. Randomized controlled trials are the current research hotspot. Conclusion: Research on GBE is flourishing; using bibliometric and thematic analysis, we identified its hotspots and trends. The pharmacological mechanisms and clinical applications of GBE are the focus of present and likely future research.

Insight into Dysmenorrhea Research from 1992 to 2022: A Bibliometric Analysis.

Dysmenorrhea, classified as primary dysmenorrhea and secondary dysmenorrhea, is a common gynecological symptom that seriously affects female daily life. At present, studies on dysmenorrhea are numerous and complex. To better reflect the trend and innovative progress of dysmenorrhea-related research, this study screened papers on the Web of Science from January 1, 1992, to December 31, 2022. A total of 1012 papers were selected and analyzed for their affiliated countries, institutions, authors, keywords, etc. China is the country with the most academic output, Beijing University of Traditional Chinese Medicine is the most influential institution, and Yang Jie, from Chengdu University of Traditional Chinese Medicine, China, is the scholar with the most papers. We consider that the current research focus is on pathogenesis, treatment, epidemiology, and self-management. With increasing research on functional connectivity between dysmenorrhea and various brain regions, functional connectivity has gradually become the forefront of research. We hope our study can promote the further study of dysmenorrhea.

Pharmacological overview of hederagenin and its derivatives.

Hederagenin is a pentacyclic triterpenoid isolated from plants and widely distributed in a variety of medicinal plants. By integrating and analyzing external related literature reports, the latest research progress on the pharmacological effects and structural modification of hederagenin was reviewed. Hederagenin has a wide range of pharmacological activities, including antitumor, anti-inflammatory, antidepressant, anti-neurodegenerative, antihyperlipidemic, antidiabetic, anti-leishmaniasis, and antiviral activities. Among them, it shows high potential in the field of anti-tumor treatment. This paper also reviews the structural modifications of hederagenin, including carboxyl group modifications and two hydroxyl group modifications. Future research on hederagenin will focus on prolonging its half-life, improving its bioavailability and structural modification to enhance its pharmacological activity, accelerating the preclinical research stage of hederagenin for it to enter the clinical research stage as soon as possible.