Phytochemical screening and antibacterial potential of Artemisia absinthium L., Swertia chirayita and Sphaeranthus indicus.

Utilization of herbs for medicinal purpose started in the early history of mankind several thousand years ago. In this study, some plants that are used for lowering cholesterol level in local areas of Pakistan, such as Artemisia absinthium L., Swertia chirayita and Sphaeranthus indicus were screened for their phytochemical and antibacterial properties. For this purpose, these plants were extracted in different solvents i.e. ethanol, hexane and ethyl acetate. Phytochemcial analysis unveiled the existence of different bioactive compounds in these extracts. Presence of sugars was further confirmed by performing TLC. Antibacterial activity was determined against indicated bacterial strains, among all extracts Gul-e-mundi had maximum inhibition zone (23mm). DPPH free radical assay revealed the significant antioxidative potential of all the extracts where Gul-e-mundi showed maximum potential i.e., 83%. Plant extracts were also showing anti-proliferative activity on root tips of Allium cepa and Gul-e-mundi was observed to have maximum antimitotic activity i.e. 5%. GC-MS analysis revealed that oleic acid and linoleic acid were the compounds responsible for imparting antibacterial potential to Gul-e-mundi. In conclusion, among all the tested extracts Gul-e-mundi had maximum antibacterial, antioxidative and antimitotic potential. For future studies, phytochemcials responsible for these activities can be isolated and modified for pharmacological purpose.

Antilisterial Effect of Rosa damascena and Nymphaea alba in Mus musculus.

The present study was proposed to investigate the toxicological and prophylactic potential of ethanolic extracts of Rosa damascena and Nymphaea alba and their mixture in albino mice. For toxicity study, three different doses of plant extracts were orally administrated to three groups of mice for 14 successive days. Blood biochemistry and histological examinations of liver and kidney revealed that these extracts had no harmful effects up to 1000 mg/kg. To determine the prophylactic effects of Rosa damascena, Nymphaea alba, and their mixture, an infection model of Listeria monocytogenes was established in a pilot study. Establishment of infection was confirmed by changes in haematological parameters and reisolation of Listeria monocytogenes from different tissues. Results showed that these extracts alone or in combination could restrict the growth of Listeria monocytogenes in different organs. Neutrophils were high in positive control group but remained in normal range in all treated groups. Listeria monocytogenes was recovered in low numbers from animals treated with extract of single plant but was negligible in group treated with mixture of extract of plants. Platelets count was increased in treated groups as compared to control. Results confirmed that these extracts are potent source of antimicrobial compounds and that they have synergistic effect in combined form.

Variation analysis of bacterial polyhydroxyalkanoates production using saturated and unsaturated hydrocarbons

ABSTRACT Polyhydroxyalkanoates (PHA) are efficient, renewable and environment friendly polymeric esters. These polymers are synthesized by a variety of microbes under stress conditions. This study was carried out to check the suitability of waste frying oil in comparison to other oils for economical bioplastic production. Six bacterial strains were isolated and identified as Bacillus cereus (KF270349), Klebsiella pneumoniae (KF270350), Bacillus subtilis (KF270351), Brevibacterium halotolerance (KF270352), Pseudomonas aeruginosa (KF270353), and Stenotrophomonas rhizoposid (KF270354) by ribotyping. All strains were PHA producers so were selected for PHA synthesis using four different carbon sources, i.e., waste frying oil, canola oil, diesel and glucose. Extraction of PHA was carried out using sodium hypochlorite method and maximum amount was detected after 72 h in all cases. P. aeruginosa led to maximum PHA production after 72 h at 37 °C and 100 rpm using waste frying oil that was 53.2% PHA in comparison with glucose 37.8% and cooking oil 34.4%. B. cereus produced 40% PHA using glucose as carbon source which was high when compared against other strains. A significantly lesser amount of PHA was recorded with diesel as a carbon source for all strains. Sharp Infrared peaks around 1740-1750 cm-1 were present in Fourier Transform Infrared spectra that correspond to exact position for PHA. The use of waste oils and production of poly-3hydroxybutyrate-co-3hydroxyvalerate (3HB-co-3HV) by strains used in this study is a good aspect to consider for future prospects as this type of polymer has better properties as compared to PHBs.

Variation analysis of bacterial polyhydroxyalkanoates production using saturated and unsaturated hydrocarbons.

Polyhydroxyalkanoates (PHA) are efficient, renewable and environment friendly polymeric esters. These polymers are synthesized by a variety of microbes under stress conditions. This study was carried out to check the suitability of waste frying oil in comparison to other oils for economical bioplastic production. Six bacterial strains were isolated and identified as Bacillus cereus (KF270349), Klebsiella pneumoniae (KF270350), Bacillus subtilis (KF270351), Brevibacterium halotolerance (KF270352), Pseudomonas aeruginosa (KF270353), and Stenotrophomonas rhizoposid (KF270354) by ribotyping. All strains were PHA producers so were selected for PHA synthesis using four different carbon sources, i.e., waste frying oil, canola oil, diesel and glucose. Extraction of PHA was carried out using sodium hypochlorite method and maximum amount was detected after 72h in all cases. P. aeruginosa led to maximum PHA production after 72h at 37°C and 100rpm using waste frying oil that was 53.2% PHA in comparison with glucose 37.8% and cooking oil 34.4%. B. cereus produced 40% PHA using glucose as carbon source which was high when compared against other strains. A significantly lesser amount of PHA was recorded with diesel as a carbon source for all strains. Sharp Infrared peaks around 1740-1750cm-1 were present in Fourier Transform Infrared spectra that correspond to exact position for PHA. The use of waste oils and production of poly-3hydroxybutyrate-co-3hydroxyvalerate (3HB-co-3HV) by strains used in this study is a good aspect to consider for future prospects as this type of polymer has better properties as compared to PHBs.

Progress in modification of sunflower oil to expand its industrial value.

Increasing the sunflower seed oil content as well as improving its quality makes it compatible for industrial demands. This is an important breeding objective of sunflower which increases its market value and ensures high returns for the producers. The present review focuses on determining the progress of improving sunflower seed oil content and modifying its quality by empirical and advanced molecular breeding methods. It is known that the sunflower oil content and quality have been altered through empirical selection methods and mutation breeding programmes in various parts of the world. Further improvement in seed oil content and its components (such as phytosterols, tocopherols and modified fatty acid profile) has been slowed down due to low genetic variation in elite germplasm and complex of hereditary traits. Introgression from wild species can be carried out to modify the fatty acids profile and tocopherol contents with linkage drags. Different transgenes introduced through biotechnological methods may produce novel long-chain fatty acids within sunflower oil. Bio-engineering of sunflower oil could allow it to be used in diverse industrial products such as bio-diesel or bio-plastics. These results showed that past and current trends of modifying sunflower oil quality are essential for its further expansion as an oilseed crop. © 2017 Society of Chemical Industry.

DRUG RESISTANCE PATTERN AND MOLECULAR CHARACTERIZATION OF MYCOBACTERIUM TUBERCULOSIS STRAINS IN PUNJAB, PAKISTAN.

Tuberculosis (TB) is a cause of death from a single infectious agent Mycobacterium tuberculosis (MTB), leading to approximately 2.5 million deaths annually worldwide. Information regarding prevalence and pattern of drug resistance among TB patients in Pakistan remains inadequate due to the country's limited resources. This study compared conventional diagnostic techniques with a PCRbased assay targeting IS6110 sequence. In addition, MTB drug resistant profiles against four first-line drugs (ethambutol, isoniazid, rifampin, and streptomycin) from new and retreatment cases of TB. From 101 sputum samples microscopic examination of Ziehl-Neelsen-stained smears and culturing on Lowenstein Jensen medium resulted in 96% and 100% positives, compared to 98% by PCR. Prevalence of MDR-MTB was 41.5% and 58.5% among new (n = 51) and retreatment (n = 50) cases, but 10% of the former group were sensitive to all four first-line anti-TB drugs. Thus, MDR-MTB is highly prevalent among TB patients in Punjab Province, Pakistan (where the study was conducted) and, although PCR amplification of MTB-specific IS6110 sequence was rapid, it lacked the sensitivity of the culture assay.

Enhanced biosynthesis of poly(3-hydroxybutyrate) from potato starch by Bacillus cereus strain 64-INS in a laboratory-scale fermenter.

To decrease the polyhydroxyalkanoate (PHA) production cost by supplying renewable carbon sources has been an important aspect in terms of commercializing this biodegradable polymer. The production of biodegradable poly(3-hydroxyalkanoates) (PHA) from raw potato starch by the Bacillus cereus 64-INS strain isolated from domestic sludge has been studied in a lab-scale fermenter. The bacterium was screened for the degradation of raw potato starch by a starch hydrolysis method and for PHA production by Nile blue A and Sudan black B staining. Shake-flask cultures of the bacterium with glucose [2% (w/v)] or raw potato starch [2% (w/v)] produced PHA of 64.35% and 34.68% of dry cell weight (DCW), respectively. PHA production was also carried out in a 5-L fermenter under control conditions that produced 2.78 g/L of PHA and PHA content of 60.53% after 21 hr of fermentation using potato starch as the sole carbon source. Gas chromatography-mass spectroscopy (GC-MS) analyses confirmed that the extracted PHA contained poly(3-hydroxybutyrate) (PHB) as its major constituent (>99.99%) irrespective of the carbon source used. The article describes, for what we believe to be the first time, PHB production being carried out without any enzymatic or chemical treatment of potato starch at higher levels by fermentation. More work is required to optimize the PHB yield with respect to starch feeding strategies.