Fractional condensation of bio-oil vapors from pyrolysis of various sawdust wastes in a bench-scale bubbling fluidized bed reactor.

The use of lignocellulosic waste as an energy source for substituting fossil fuels has attracted lots of attention, and pyrolysis has been established as an effective technology for this purpose. However, the utilization of bio-oil derived from non-catalytic pyrolysis faces certain constraints, making it impractical for direct application in advanced sectors. This study has focused on overcoming these challenges by employing fractional condensation of pyrolytic vapors at distinct temperatures. The potential of five types of sawdust for producing high-quality bio-oil through pyrolysis conducted with a bench-scale bubbling fluidized bed reactor was investigated for the first time. The highest yield of bio-oil (61.94 wt%) was produced using sample 3 (damaged timber). Remarkably, phenolic compounds were majorly gathered in the 1st and 2nd condensers at temperatures of 200 °C and 150 °C, respectively, attributing to their higher boiling points. Whereas, carboxylic acid, ketones, and furans were mainly collected in the 3rd (-5 °C) and 4th (-20 °C) condensers, having high water content in the range of 35.33%-65.09%. The separation of acidic nature compounds such as acetic acid in the 3rd and 4th was evidenced by its low pH in the range of 4-5, while the pH of liquid collected in the 1st and 2nd condensers exhibited higher pH (6-7). The well-separated bio-oil derived from biomass pyrolysis facilitates its wide usage in various applications, proposing a unique approach toward carbon neutrality. In particular, achieving efficient separation of phenolic compounds in bio-oil is important, as these compounds can undergo further upgrading to generate hydrocarbons and diesel fuel.

Enhanced mono-aromatics production by the CH4-assisted pyrolysis of microalgae using Zn-based HZSM-5 catalysts.

This study presents the catalytic pyrolysis of microalgae, Chlorella vulgaris (C. vulgaris), using pure CH4 and H2-rich gas evolved from CH4 decomposition on three different HZSM-5 catalysts loaded with Zn, Ga, and Pt, aimed specifically at producing high-value mono-aromatics such as benzene, toluene, ethylbenzene, and xylene (BTEX). In comparison with that for the typical inert N2 environment, a pure CH4 environment increased the bio-oil yield from 32.4 wt% to 37.4 wt% probably due to hydrogen and methyl radical insertion in the bio-oil components. Furthermore, the addition of bimetals further increased bio-oil yield. For example, ZnPtHZ led to a bio-oil yield of 47.7 wt% in pure CH4. ZnGaHZ resulted in the maximum BTEX yield (6.68 wt%), which could be explained by CH4 activation, co-aromatization, and hydrodeoxygenation. The BTEX yield could be further increased to 7.62 wt% when pyrolysis was conducted in H2-rich gas evolved from CH4 decomposition over ZnGaHZ, as rates of aromatization and hydrodeoxygenation were relatively high under this condition. This study experimentally validated that the combination of ZnGaHZ and CH4 decomposition synergistically increases BTEX production using C. vulgaris.

Assessment of the Antioxidant and Anti-inflammatory Properties of Aqueous Extract of Rosa sempervirens Leaves.

The antioxidant and anti-inflammatory properties of an aqueous natural extract obtained from Rosa sempervirens leaves were assessed. The ability of the extract to scavenge DPPH, •OH, and H2O2 radicals, chelate ferrous ions, reduce ferric ions, and protect ß-carotene-linoleic acid in emulsion from peroxidation was investigated in vitro. Furthermore, the anti-inflammatory activity of the extract was evaluated by measuring the stability of the membrane of human red blood cells against different hypotonic concentrations of NaCl and heat, as well as by inhibiting the denaturation of albumin. A high total phenolic content (278.38± 11.07 mg GAE/g) and flavonoid content (34.22± 0.12 mg QE /g) were found in the extract. The extract exhibited significant scavenging activity of DPPH (IC50 6.201 ± 0.126 µg/ ml), •OH (IC50 = 894.57 ± 21.18 µg/ml), and H2O2 (IC50= 107±09.58 µg/ml) radicals, and good antioxidant activity by chelating ferrous ions (IC50 = 2499.086 ± 28.267µg/ml), reducing ferric ions (IC50=141.33±2.34 µg/ml), exhibiting total antioxidant capacity (IC50 465.65 ± 9.71 µg/ml), and protecting ß-carotene-linoleic acid against peroxidation (I% = 90.05 ± 1.65% at 1000µg/ml). R. sempervirens displayed anti-inflammatory activity in aqueous extract by inhibiting heat-induced albumin denaturation and stabilizing the membrane of human red blood cells. It was suggested from the results that R. sempervirens aqueous extract could help prevent oxidative and inflammatory processes due to its good antioxidant and anti-inflammatory properties.

The comprehensive effects of aluminum oxide nanoparticles on the physiology of freshwater microalga Scenedesmus obliquus and it's phycoremediation performance for the removal of sulfacetamide.

Nanoparticles are inevitable byproducts of modern industry. However, the environmental impacts arising from industrial applications of nanoparticles are largely under-reported. This study evaluated the ecotoxicological effects of aluminum oxide nanoparticles (Al2O3NP) and its influence on sulfacetamide (SA) biodegradation by a freshwater microalga, Scenedesmus obliquus. Although Al2O3NP showed limited toxicity effect on S. obliquus, we observed the toxicity attenuation aspect of Al2O3NP in a mixture of sulfacetamide on microalgae. The addition of 100 mg L-1 of Al2O3NP and 1 mg L-1 of SA reduced total chlorophyll by 23.3% and carotenoids by 21.6% in microalgal compared to control. The gene expression study demonstrated that ATPF0C, Lhcb1, HydA, and psbA genes responsible for ATP synthesis and the photosynthetic system were significantly downregulated, while the Tas gene, which plays a major role in biodegradation of organic xenobiotic chemicals, was significantly upregulated at 1 and 100 mg L-1 of Al2O3NP. The S. obliquus removed 16.8% of SA at 15 mg L-1 in 14 days. However, the removal was slightly enhanced (18.8%) at same concentration of SA in the presence of 50 mg L-1 Al2O3NP. This result proves the stability of sulfacetamide biodegradation capacity of S. obliquus in the presence of Al2O3NP co-contamination. The metabolic analysis showed that SA was degraded into simpler byproducts such as sulfacarbamide, sulfaguanidine, sulfanilamide, 4-(methyl sulfonyl)aniline, and N-hydroxy-benzenamine which have lower ecotoxicity than SA, demonstrating that the ecotoxicity of sulfacetamide has significantly decreased after the microalgal degradation, suggesting the environmental feasibility of microalgae-mediated wastewater technology. This study provides a deeper understanding of the impact of nanoparticles such as Al2O3NP on aquatic ecosystems.

Marine Alga Ulva fasciata-Derived Molecules for the Potential Treatment of SARS-CoV-2: An In Silico Approach.

SARS-CoV-2 is the causative agent of the COVID-19 pandemic. This in silico study aimed to elucidate therapeutic efficacies against SARS-CoV-2 of phyco-compounds from the seaweed, Ulva fasciata. Twelve phyco-compounds were isolated and toxicity was analyzed by VEGA QSAR. Five compounds were found to be nonmutagenic, noncarcinogenic and nontoxic. Moreover, antiviral activity was evaluated by PASS. Binding affinities of five of these therapeutic compounds were predicted to possess probable biological activity. Fifteen SARS-CoV-2 target proteins were analyzed by the AutoDock Vina program for molecular docking binding energy analysis and the 6Y84 protein was determined to possess optimal binding affinities. The Desmond program from Schrödinger's suite was used to study high performance molecular dynamic simulation properties for 3,7,11,15-Tetramethyl-2-hexadecen-1-ol-6Y84 for better drug evaluation. The ligand with 6Y84 had stronger binding affinities (-5.9 kcal/mol) over two standard drugs, Chloroquine (-5.6 kcal/mol) and Interferon α-2b (-3.8 kcal/mol). Swiss ADME calculated physicochemical/lipophilicity/water solubility/pharmacokinetic properties for 3,7,11,15-Tetramethyl-2-hexadecen-1-ol, showing that this therapeutic agent may be effective against SARS-CoV-2.

Human supplementation with Pediococcus acidilactici GR-1 decreases heavy metals levels through modifying the gut microbiota and metabolome.

Exposure to heavy metals (HMs) is a threat to human health. Although probiotics can detoxify HMs in animals, their effectiveness and mechanism of action in humans have not been studied well. Therefore, we conducted this randomized, double-blind, controlled trial on 152 occupational workers from the metal industry, an at-risk human population, to explore the effectiveness of probiotic yogurt in reducing HM levels. Participants were randomly assigned to two groups: one consumed probiotic yogurt containing the HM-resistant strain Pediococcus acidilactici GR-1 and the other consumed conventional yogurt for 12 weeks. Analysis of metal contents in the blood revealed that the consumption of probiotic yogurt resulted in a higher and faster decrease in copper (34.45%) and nickel (38.34%) levels in the blood than the consumption of conventional yogurt (16.41% and 27.57%, respectively). Metagenomic and metabolomic studies identified a close correlation between gut microbiota (GM) and host metabolism. Significantly enriched members of Blautia and Bifidobacterium correlated positively with the antioxidant capacities of GM and host. Further murine experiments confirmed the essential role of GM and protective effect of GR-1 on the antioxidative role of the intestine against copper. Thus, the use of probiotic yogurt may be an effective and affordable approach for combating toxic metal exposure through the protection of indigenous GM in humans.ClinicalTrials.gov identifier: ChiCTR2100053222.

Hydroalcoholic Extract of Sechium edule Fruits Attenuates QT Prolongation in High Fat Diet-Induced Hyperlipidemic Mice.

The present study aimed to evaluate the effect of hydroalcoholic extract of Sechium edule (S.E.) fruits on lipid profile and electrocardiogram (ECG) parameters in high fat-diet (HFD) induced hyperlipidemic mice. In this study, grouping of animals was done as described below (n = 6), where group 1 is normal control, group 2 is HFD control, group 3 is HFD + atorvastatin (10 mg/kg), group 4 is HFD + S.E. extract (200 mg/kg), and group 5 is HFD + S.E. extract (400 mg/kg). The first 3 weeks animals were supplemented with HFD, and the last 3 weeks animals were supplemented with HFD along with atorvastatin (10 mg/kg) or S.E. extract (200 and 400 mg/kg). It was observed that mice of the HFD control group showed a significant rise in the total cholesterol, triglycerides, LDL-C, and VLDL-C levels and a notable decrease in HDL-C levels. In addition, a consequential increment in ECG parameters such as QT or QTc and RR interval and a noteworthy decline in the heart rate were observed in HFD control mice. Treatment with S.E. extract (200 and 400 mg/kg) showed a significant improvement in the lipid profile. Moreover, the extract also significantly normalized the prolonged QT or QTc and RR interval and the heart rate in HFD-challenged mice. Hence, we can conclude that S.E. extract encumbers the prolongation of QT or QTc and RR interval and increased the heart rate in HFD-challenged mice.

Efficient removal of formaldehyde using metal-biochar derived from acid mine drainage sludge and spent coffee waste.

A novel metal-biochar (Biochar/AMDS) composite were fabricated by co-pyrolysis of spent coffee waste (SCW)/acid mine drainage sludge (AMDS), and their effective application in adsorptive removal of air pollutants such as formaldehyde in indoor environments was evaluated. The physicochemical characteristics of Biochar/AMDS were analyzed using SEM/EDS, XRF, XRD, BET, and FTIR. The characterization results illustrated that Biochar/AMDS had the highly porous structure, carbonaceous layers, and heterogeneous Fe phases (hematite, metallic Fe, and magnetite). The fixed-bed column test showed that the removal of formaldehyde by Biochar/AMDS was 18.4-fold higher than that by metal-free biochar (i.e., SCW-derived biochar). Changing the ratio of AMDS from 1:6 to 1:1 significantly increased the adsorption capacity for formaldehyde from 1008 to 1811 mg/g. In addition, thermal treatment of used adsorbent at 100 °C effectively restored the adsorptive function exhausted during the column test. These results provide new insights into the fabrication of practical, low-cost and ecofriendly sorbent for formaldehyde.

Biological Conversion of Amino Acids to Higher Alcohols.

'Higher' alcohols, which contain more than two carbons, have a higher boiling point, higher cetane number, and higher energy density than ethanol. Blends of biodiesel and higher alcohols can be used in internal combustion engines as next-generation biofuels without any modification and are minimally corrosive over extensive use. Producing higher alcohols from biomass involves fermenting and metabolizing amino acids. In this review, we describe the pathways and regulatory mechanisms involved in amino acid bioprocessing to produce higher alcohols and the effects of amino acid supplementation as a nitrogen source for higher alcohol production. We also discuss the most recent approaches to improve higher alcohol production via genetic engineering technologies for three microorganisms: Saccharomyces cerevisiae, Clostridium spp., and Escherichia coli.

Asparagus densiflorus in a vertical subsurface flow phytoreactor for treatment of real textile effluent: A lab to land approach for in situ soil remediation.

This study explores the potential of Asparagus densiflorus to treat disperse Rubin GFL (RGFL) dye and a real textile effluent in constructed vertical subsurface flow (VSbF) phytoreactor; its field cultivation for soil remediation offers a real green and economic way of environmental management. A. densiflorus decolorized RGFL (40 gm L-1) up to 91% within 48 h. VSbF phytoreactor successfully reduced American dye manufacture institute (ADMI), BOD, COD, Total Dissolved Solids (TDS) and Total Suspended Solids (TSS) of real textile effluent by 65%, 61%, 66%, 48% and 66%, respectively within 6 d. Oxidoreductive enzymes such as laccase (138%), lignin peroxidase (129%), riboflavin reductase (111%) were significantly expressed during RGFL degradation in A. densiflorus roots, while effluent transformation caused noteworthy induction of enzymes like, tyrosinase (205%), laccase (178%), veratryl oxidase (52%). Based on enzyme activities, UV-vis spectroscopy, FTIR and GC-MS results; RGFL was proposed to be transformed to 4-amino-3- methylphenyl (hydroxy) oxoammonium and N, N-diethyl aniline. Anatomical study of the advanced root tissue of A. densiflorus exhibited the progressive dye accumulation and removal during phytoremediation. HepG2 cell line and phytotoxicity study demonstrated reduced toxicity of biotransformed RGFL and treated effluent by A. densiflorus, respectively. On field remediation study revealed a noteworthy removal (67%) from polluted soil within 30 d.

Effect of mine wastewater on nutrient removal and lipid production by a green microalga Micratinium reisseri from concentrated municipal wastewater.

Effect of mine wastewater on the nutrient removal efficiency of a green microalga Micratinium reisseri from concentrated municipal wastewater (CMW) with simultaneous lipid production was investigated. Different dilution ratios (1-10%) of CMW either with mine wastewater (MWF) or mine wastewater without Fe (MWOF) were used. M. reisseri showed the highest growth (0.8gL(-1)) and nutrient uptake (35.9mgTNL(-1) and 5.4mgTPL(-1)) at 3% MWF ([Fe]tot=6.7mgL(-1)), and the highest lipid productivity (10.4mgL(-1)day(-1)) at 5% MWF ([Fe]tot=11.2mgL(-1)) after 15days. CMW supported the algal autoflocculation due to formation of phosphate, calcium and magnesium precipitates at a high suspension pH. Fatty acid methyl ester analysis revealed that the microalgal lipids possessed 79-82% of C16/C18 fatty acids. Application of mine wastewater improved the nutrient removal efficiency, growth and lipid productivity of M. reisseri cultivated in CMW.

Utilization of carbon derived from mustard oil cake (CMOC) for the removal of bivalent metal ions: effect of anionic surfactant on the removal and recovery.

Effect of sodium dodecyl sulfate (SDS) on the adsorption of Zn(II) and Ni(II) on CMOC was investigated. Addition of SDS favored the adsorption process. Adsorption process was found to be dependent on concentration, pH, dose, contact time and temperature. Thermodynamic studies showed that the process is endothermic and spontaneous. The spontaneity increases with increase in temperature. D-R isotherm suggests that the adsorption is chemical in nature. Kinetics studies showed better applicability of pseudo second order model. Reichenberg equation showed that pore diffusion was not only the rate determining step but some other process like film diffusion was also involved in the adsorption. These metals could be desorbed (75-80%) with 0.1M HCl as eluent.

Microbial reduction of intragrain U(VI) in contaminated sediment.

The accessibility of precipitated, intragrain U(VI) in a contaminated sediment to microbial reduction was investigated to ascertain geochemical and microscopic transport phenomena controlling U(VI) bioavailability. The sediment was collected from the U.S. Department of Energy Hanford site, and contained uranyl precipitates within the mm-sized granitic lithic fragments in the sediment. Bioreduction was investigated in a culture of a dissimilatory metal-reducing bacterium, Shewanellea oneidensis strain MR-1. Measurements of uranium concentration, speciation, and valence in aqueous and solid phases indicated that microbial reduction of intragrain U(VI) proceeded by two mechanisms: (1) sequentially coupled dissolution of intragrain uranyl precipitates, diffusion of dissolved U(VI) from intragrain regions, and microbial reduction of dissolved U(VI); and (2) U(VI) reduction in the intragrain regions by soluble, diffusible biogenic reductants. The bioreduction rate in the first pathway was over 3 orders of magnitude slowerthan that in comparable aqueous solutions containing aqueous U(VI) only. The slower bioreduction rate was attributed to (1) the release of calcium from the desorption/dissolution of calcium-containing minerals in the sediment, which subsequently altered U(VI) aqueous speciation and slowed U(VI) bioreducton and (2) alternative electron transfer pathways that reduced U(VI) in the intragrain regions and changed its dissolution and solubility behavior. The results implied that the overall rate of bioreduction of intragrain U(VI) will be influenced by the reactive mass transfer of U(VI) and biogenic reductants within intragrain regions, and geochemical reactions controlling major ion concentrations.

Influence of calcium on microbial reduction of solid phase uranium(VI).

The effect of calcium on the dissolution and microbial reduction of a representative solid phase uranyl [U(VI)], sodium boltwoodite (NaUO(2)SiO(3)OH . 1.5H(2)O), was investigated to evaluate the rate-limiting step of microbial reduction of the solid phase U(VI). Microbial reduction experiments were performed in a culture of a dissimilatory metal-reducing bacterium (DMRB), Shewanella oneidensis strain MR-1, in a bicarbonate medium with lactate as electron donor at pH 6.8 buffered with PIPES. Calcium increased the rate of Na-boltwoodite dissolution and U(VI) bioavailability by increasing its solubility through the formation of a ternary aqueous calcium-uranyl-carbonate species. The ternary species, however, decreased the rates of microbial reduction of aqueous U(VI). Laser-induced fluorescence spectroscopy (LIFS) and transmission electron microscopy (TEM) collectively revealed that microbial reduction of solid phase U(VI) was a sequentially coupled process of Na-boltwoodite dissolution, U(VI) aqueous speciation, and microbial reduction of dissolved U(VI) to U(IV) that accumulated on bacterial surfaces/periplasm. Under studied experimental conditions, the overall rate of microbial reduction of solid phase U(VI) was limited by U(VI) dissolution reactions in solutions without calcium and limited by microbial reduction in solutions with calcium. Generally, the overall rate of microbial reduction of solid phase U(VI) was determined by the coupling of solid phase U(VI) dissolution, U(VI) aqueous speciation, and microbial reduction of dissolved U(VI) that were all affected by calcium.

Kinetics of microbial reduction of Solid phase U(VI).

Sodium boltwoodite (NaUO2SiO3OH x 1.5 H2O) was used to assess the kinetics of microbial reduction of solid-phase U(VI) by a dissimilatory metal-reducing bacterium (DMRB), Shewanella oneidensis strain MR-1. The bioreduction kinetics was studied with Na-boltwoodite in suspension or within alginate beads in a nongrowth medium with lactate as electron donor at pH 6.8 buffered with PIPES. Concentrations of U(VI)tot and cell number were varied to evaluate the coupling of U(VI) dissolution, diffusion, and microbial activity. Microscopic and spectroscopic analyses with transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), and laser-induced fluorescence spectroscopy (LIFS) collectively indicated that solid-phase U(VI) was first dissolved and diffused out of grain interiors before it was reduced on bacterial surfaces and/or within the periplasm. The kinetics of solid-phase U(VI) bioreduction was well described by a coupled model of bicarbonate-promoted dissolution of Na-boltwoodite, intragrain uranyl diffusion, and Monod type bioreduction kinetics with respect to dissolved U(VI) concentration. The results demonstrated that microbial reduction of solid-phase U(VI) is controlled by coupled biological, chemical, and physical processes.