EURADOS coordinated action on research, quality assurance and training of internal dose assessments.

EURADOS working group on 'Internal Dosimetry (WG7)' represents a frame to develop activities in the field of internal exposures as coordinated actions on quality assurance (QA), research and training. The main tasks to carry out are the update of the IDEAS Guidelines as a reference document for the internal dosimetry community, the implementation and QA of new ICRP biokinetic models, the assessment of uncertainties related to internal dosimetry models and their application, the development of physiology-based models for biokinetics of radionuclides, stable isotope studies, biokinetic modelling of diethylene triamine pentaacetic acid decorporation therapy and Monte-Carlo applications to in vivo assessment of intakes. The working group is entirely supported by EURADOS; links are established with institutions such as IAEA, US Transuranium and Uranium Registries (USA) and CEA (France) for joint collaboration actions.

Use of group monitoring data in lung dose estimation for intakes of uranium.

This paper describes an internal dosimetry program developed for Canadian uranium processing facilities. The recently adopted recommendations of ICRP Publication 60 have made it extremely difficult to detect intakes of insoluble forms of natural uranium by in vivo methods (lung counting). A type S intake of UO2 corresponding to a 20 mSv effective dose has a lung burden that is a factor of 2-3 lower than the MDA, 6 months after the intake occurred. A new methodology, approved in principle by the Canadian Nuclear Safety Commission, has been designed to overcome this problem by summing sequential, but separate, lung counts for an individual, or summing lung counts from a group of workers performing similar tasks. This summing technique effectively increases the counting time and, therefore, reduces the MDA to a value below the dose limit. Doses will be assigned to the individual or work group based on the average lung burden.

Monte Carlo simulations: a useful tool to extend in vivo calibrations and explore alternative approaches.

Designing and testing new equipment can be an expensive and time consuming process or the desired performance characteristics may preclude its construction due to technological shortcomings. Cost may also prevent other types of scenario being tested. An alternative is to use Monte Carlo simulations to make the investigations. This paper exemplifies how Monte Carlo code calculations can be used to fill the gap by describing two investigations: (1) the possible self-attenuation of homogeneously distributed natural uranium in a lung phantom; and (2) the effect of activity deposited in the ribs on the activity estimate from a lung count.

Chest wall thickness measurements and the dosimetric implications for male workers in the south Korean uranium industry.

Using ultrasound techniques, the Human Monitoring Laboratory has measured chest wall thicknesses of a group of male workers at the Korea Atomic Energy Research Institute. A site-specific biometric equation has been developed for these workers, who are somewhat smaller than other workers reported in the literature. Chest wall thickness is an important modifier on lung counting efficiency. These data have been put into the perspective of the ICRP recommended dose limits for occupationally exposed workers: 100 mSv in a 5-year period with a maximum of 50 mSv in any one year. For measured chest wall thicknesses of 1.9 cm to 4.1 cm and a 30 min counting time, the achievable MDAs for natural uranium in the KAERI lung counter vary from 6.6 mg to 13.2 mg. These values are close to, or even exceed, the predicted amounts of natural uranium that will remain in the lung (absorption type M and S) after an intake equal to the Annual Limit on Intake corresponding to a committed dose of 20 mSv. This paper shows that the KAERI lung counter probably cannot detect an intake of Type S natural uranium in a worker with a chest wall thickness equal to the average value (2.7 cm) under routine counting conditions.

Chest wall thickness measurements and the dosimetric implications for male workers in the uranium industry.

The Human Monitoring Laboratory has measured the chest wall thickness and adipose mass fraction of a group of workers at a Canadian uranium refinery, a conversion plant, and a fuel fabrication site using ultrasound. A site-specific biometric equation has been developed for these workers, who seem to be somewhat larger than other workers reported in the literature. Chest wall thickness is a very important modifier on lung counting efficiency and these data have been put into the perspective of the impending Canadian dose limits that will reduce the limit of occupationally exposed workers to 100 mSv in a 5-y period with a maximum of 50 mSv in any one year. The sensitivity of the germanium and phoswich based lung counting systems have been compared. Over a range of chest wall thickness of 1.6 cm to 6.0 cm and using a 30-min counting time, the achievable MDA's lie in the range of 6.7 mg to 19.1 mg or 6.7 mg to 30 mg with a two-phoswich-detector array or a germanium lung counting system, respectively. Depending on chest wall thickness, these achievable MDA's are close to, or exceed, the predicted amounts of natural uranium that will remain in the lung (absorption type M and S) after an intake equivalent to the Annual Limit on Intake that corresponds to 20 mSv. Neither system is sufficiently sensitive to detect an intake of Type S natural uranium in a worker with a chest wall thickness that corresponds to the average (3.73 cm) if it occurred more than 7 d prior to the lung count.

The Canadian National Calibration Reference Center for Bioassay and in-vivo Monitoring: a program summary.

The Canadian National Calibration Reference Center for Bioassay and in-vivo Monitoring is part of the Radiation Protection Bureau, Department of Health. The Reference Center operates a variety of different intercomparison programs that are designed to confirm that workplace monitoring results are accurate and provide the necessary external verification required by the Canadian regulators. The programs administered by the Reference Center currently include urinalysis intercomparisons for tritium, natural uranium, and 14C, and in-vivo programs for whole-body, thorax, and thyroid monitoring. The benefits of the intercomparison programs to the participants are discussed by example. Future programs that are planned include dual spiked urine sample which contain both tritium and 14C and the in-vivo measurement of 99mTc.

Measurement of the natural uranium content of fabricated, tissue substitute lung sets by dual photon absorptiometry.

The assessment of tissue substitute materials by dual photon absorptiometry has been extended to detect the presence of high atomic weight materials. Commercial dual photon systems dedicated to the measurement of bone mineral mass can be used to detect other elements in fabricated tissue phantoms. The technique is sufficiently sensitive to quantitate the mass of natural uranium that had been distributed throughout the lungs of a thorax phantom.

The Canadian National Calibration Reference Centre for In-Vivo Monitoring: thyroid monitoring. Part IV: Optimizing a counting system that uses a single-channel analyzer.

This article is the fourth of a five-part series covering various aspects of occupational thyroid monitoring. This article describes the energy calibration of the monitoring system with particular emphasis on techniques for optimizing a system that is based on a single-channel analyzer, or any system that does not have a multi-channel analyzer. These systems cannot directly show the operator the photopeak of the calibration source. The article also briefly discusses quality control and problem solving.

Chest wall thickness measurements for enriched uranium: an alternative approach.

The Human Monitoring Laboratory has developed a technique to determine the chest wall thickness of an individual using information from the spectrum produced by internally deposited radionuclides. The technique has been investigated both theoretically and practically using phoswich detectors and the Lawrence Livermore Torso Phantom. The phantom was used with lung sets containing homogeneously distributed 93% enriched uranium, 20% enriched uranium, natural uranium, and 241Am. It was found that a 3-cm chest wall thickness can be estimated to within 9% when measuring 93% enriched uranium. The technique does not work for the latter two radionuclides because of an insufficient separation in the photon energies and poor resolution of the phoswich detectors. The technique is only of value for activity levels well above the detection limit.

The Canadian National Calibration Reference Centre for In-Vivo Monitoring: thyroid monitoring. Part III: A basic calibration procedure for thyroid monitoring.

This article is the third of a five-part series covering various aspects of occupational thyroid monitoring. This article introduces the basic concepts required to understand the procedure for determining the counting efficiency of a thyroid detector. The B.R.M.D. thyroid-neck phantom is used as the calibration source. A procedure for personnel monitoring is also discussed and the concept of Minimum Detectable Activity (MDA) is introduced. The last two articles in this series discuss energy calibration, counting system optimization based on a single-channel analyzer and placement error minimization.

The Canadian National Calibration Reference Centre for In-Vivo Monitoring. Part II: Sources of errors in thyroid monitoring of occupationally exposed personnel.

This article, the second of a five-part series covering various aspects of occupational thyroid monitoring, addresses the sources of error that can affect the final result obtained from thyroid monitoring, such as geometry effects (thyroid size, thyroid depth, precision and accuracy of the detector placement, and neck-detector distance). The article also suggests ways in which these errors can be minimized and identifies those errors that are difficult to quantify.

The Canadian National Calibration Reference Centre for In-Vivo Monitoring: thyroid monitoring. Part I: The national inter-comparison programme.

This article is the first part of a five-part series covering various aspects of occupational thyroid monitoring. The Canadian National Calibration Reference Centre for In-Vivo Monitoring conducts a thyroid inter-comparison programme that now includes more than 100 facilities. The scope of the programme, begun in 1988, has greatly expanded in the last two years following a considerable effort to locate and inform facilities. This article presents the details of the programme, its results, and the lessons learned. Subsequent articles will discuss sources of errors, methodology, instrumental configuration, and counting geometry optimization.