TiO2 microspheres containing magnetic nanoparticles for intra-arterial hyperthermia.

Magnetic microspheres measuring 15-35 µm in diameter are believed to be useful for intra-arterial hyperthermia. In this study, we attempted to prepare titanium dioxide (TiO2 ) microspheres containing magnetic nanoparticles (MNPs). MNP-containing TiO2 microspheres with diameters of approximately 30 µm were successfully obtained by sol-gel reaction of titanium tetraisopropoxide in a water-in-oil emulsion with added cosurfactant of 1-butanol and subsequent heat treatment at 200°C. The microspheres showed ferrimagnetism owing to high content of MNPs in approximately 60 wt % and had a low-crystalline TiO2 matrix. Furthermore, the agar phantom was heated to above 43°C after approximately 1 min under an alternating magnetic field of 100 kHz and 300 Oe and showed in vitro biocompatibility similar to that of MNP-free TiO2 microspheres. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2308-2314, 2017.

Effect of fibronectin adsorption on osteoblastic cellular responses to hydroxyapatite and alumina.

Initial cellular responses following implantation are important for inducing osteoconduction. We investigated cell adhesion, spreading, proliferation and differentiation of mouse MC3T3-E1 osteoblastic cells on untreated or fibronectin (Fn)-coated discs of hydroxyapatite (HAp) or alpha-type alumina (α-Al2O3). Fn coating significantly enhanced adhesion and spreading of MC3T3-E1 cells on HAp, but did not affect MC3T3-E1 cell proliferation and differentiation on HAp or α-Al2O3. Fn-coated HAp likely does not stimulate pre-osteoblast cells to initiate the process of osteoconduction; however, Fn adsorption might affect the response of inflammatory cells to the implanted material or, in conjunction with other serum proteins, stimulate pre-osteoblast cell proliferation and differentiation. Further studies on the effect of serum proteins in cell culture and the efficacy of Fn-coated HAp and α-Al2O3in vivo are warranted.

Fibronectin adsorption on osteoconductive hydroxyapatite and non-osteoconductive α-alumina.

The osteoconductivity mechanism of hydroxyapatite (HAp) has not been elucidated. It is hypothesized that specific proteins adsorb on HAp, promoting its osteoconductivity. To verify this hypothesis, we compared the adsorption behavior of fibronectin (Fn) on HAp powder and on α-alumina (α-Al2O3) powder, a material with no osteoconductivity. More Fn adsorbed on α-Al2O3 than on HAp, irrespective of the Fn concentration, and there was no significant difference in the secondary structure of Fn adsorbed on HAp and α-Al2O3. Further, it is possible that Fn did not adsorb on HAp and α-Al2O3 through the Arg-Gry-Asp motif of Fn. The amount of Fn adsorbed on HAp oriented to the a(b)-axis with very little decrease in carbonate and the adsorbed Fn had a smaller α-helix structure content. The results suggest that the secondary and/or higher-order structure rather than the amount of adsorbed Fn might affect the osteoconductivity of HAp, which might be electrostatically controlled by the crystal face orientation and/or carbonate content of HAp, although this should be confirmed by a cell culture test in the future.

MC3T3-E1 and RAW264.7 cell response to hydroxyapatite and alpha-type alumina adsorbed with bovine serum albumin.

Initial cell responses following implantation are important for inducing osteoconductivity. We investigated cell adhesion, spreading, and proliferation in response to native and bovine serum albumin (BSA)-adsorbed disc of hydroxyapatite (HA) or alpha-type alumina (α-Al2O3) using mouse MC3T3-E1 osteoblastic cells and mouse RAW264.7 macrophages. The adsorbed BSA inhibited adhesion and spreading of MC3T3-E1 cells, but did not affect MC3T3-E1 cell proliferation on HA and α-Al2O3 substrates. Thus, MC3T3-E1 cells quickly adhere to original HA before cell binding is impeded by adsorption of BSA in quantities sufficient to inhibit the adhesion of MC3T3-E1 cells. The adsorbed BSA inhibits adhesion of RAW264.7 cells to α-Al2O3, but not to HA. BSA adsorption does not affect RAW264.7 cell spreading and proliferation on both HA and α-Al2O3 substrates. Thus, BSA adsorbed on HA stimulates a different cell response than α-Al2O3. Moreover, quick adherence of osteoblast cells and monocyte-macrophage lineage cells plays a role in HA osteoconductivity.

Sol-gel synthesis, characterization, and in vitro compatibility of iron nanoparticle-encapsulating silica microspheres for hyperthermia in cancer therapy.

We prepared iron nanoparticle-encapsulating silica (FeSi) microspheres and tested their suitability as thermal seeds for hyperthermia in cancer therapy. These microspheres were prepared by introducing a ferric ion (Fe(3+)) into microspheres of a SiO(2) gel matrix derived from the hydrolysis of tetramethoxysilane in a water-in-oil emulsion that was then heat-treated at 850 °C in an argon atmosphere. The particles obtained were 5-30 µm in size and had a saturation magnetization up to 21 emu g(-1) and a coercive force of 86-133 Oe. Heat generation in an alternating current magnetic field of 300 Oe at 100 kHz was estimated to be 7.7-28.9 W g(-1). The in vitro cell biocompatibility of the microspheres was assessed by culturing rat fibroblast Rat-1 cells in medium supplemented with microspheres containing 6.7 % of iron nanoparticles. At microsphere concentrations of <7.5 g L(-1) proliferation of Rat-1 cells was not significantly inhibited.

In vitro assessment of poly(methylmethacrylate)-based bone cement containing magnetite nanoparticles for hyperthermia treatment of bone tumor.

Poly(methylmethacrylate) (PMMA)-based cements containing magnetite (C-PMMA/Fe(3)O(4)) is useful in hyperthermia treatment for bone tumor. We have prepared C-PMMA/Fe(3)O(4) by incorporating Fe(3) O(4) powders of different diameters (means of 300, 35, and 11 nm) into the polymerization reaction of methyl methacrylate monomer to develop a new bone cement with high heating efficiencies in alternating current (AC) magnetic fields. Further, we have investigated the in vitro heating capability of the cements in different AC magnetic fields. The mechanical strength and biocompatibility of the resultant cements were also assessed. Their heat generation strongly depends on the magnetite nanoparticle sizes and applied magnetic fields. The cement containing Fe(3)O(4) with mean diameter around 35 nm exhibited the highest heating capability in AC magnetic fields of 120 and 300 Oe at 100 kHz while that with mean diameter around 11 nm exhibited optimum heating capability in AC magnetic fields of 40 Oe at 600 kHz. The incorporation of Fe(3)O(4) into cement-30 wt % of the total amount of cement-did not significantly change the compressive strength of cement, and the proliferation of rat fibroblast Rat-1 cells on cement discs was not inhibited. Our investigations are useful for designing new PMMA/Fe(3)O(4) bone cement with high heating efficiencies and biocompatibilities for bone tumor treatments.