Genicular artery embolization for knee osteoarthritis: Results of the LipioJoint-1 trial.

PURPOSE: The purpose of this study was to evaluate the safety and efficacy of transient genicular artery embolization (GAE) using an ethiodized oil-based emulsion for the treatment of knee osteoarthritis (KOA). MATERIALS AND METHODS: This prospective, single-arm, open-label, multicenter, first-in-human cohort trial was registered on ClinicalTrials.gov (NCT04733092). The main inclusion criterion was diagnosis of KOA according to a visual analogue scale (VAS) pain score ≥ 40 mm (score range: 0-100 mm), despite conservative treatment for at least three months. Treatment efficacy was assessed using changes in VAS pain score, Mean Western Ontario & McMaster Universities osteoarthritis (WOMAC) function score (normalized to 100; score ranging from 0 to100) and outcome measures in rheumatoid arthritis clinical trials (OMERACT)-Osteoarthritis Research Society (OARSI) set of responder criteria. RESULTS: Twenty-two consecutive participants (13 women; mean age, 66 ± 9 [standard deviation (SD)]) were included and underwent GAE. Emulsion consisted in a mixture of ioversol and ethiodized oil (ratio 1:3, respectively) prepared extemporaneously. The rate of serious adverse events attributed to GAE within one month was 5% (1/22), corresponding to reversible worsening of renal function. Immediate technical success rate was 100%. Mean VAS pain score dropped from 74.4 ± 16.5 (SD) mm at baseline to 37.2 ± 26.7 (SD) mm at three months (P < 0.001). Mean WOMAC function score (normalized to 100: score ranging from 0 to 100) decreased from 57.3 ± 17.1 (SD) at baseline to 33.5 ± 25.9 (SD) at three months (P < 0.001). At three months, 16 out of 22 participants (73%) were considered responders according to the OMERACT-OARSI set of responder criteria, including high improvement in either pain or WOMAC function, or improvement in both pain and WOMAC function. CONCLUSION: GAE using an ethiodized oil-based emulsion is safe and improves pain and function in participants with KOA for at least three months.

Bisphosphonate treatment in inaccessible osteoid osteomas: An alternative therapeutic approach.

INTRODUCTION: Osteoid osteoma is a benign osteogenic tumour traditionally treated by surgical excision or percutaneous CT-guided procedures. We describe three cases of osteoid osteomas of which the locations were difficult to access, or for which the procedure was potentially unsafe, involving treatment with zoledronic acid infusions. CASE DESCRIPTION: We report here three male 28-to-31-year-old patients with no medical history who had osteoid osteomas located at the second cervical vertebra, the femoral head, and the third lumbar vertebra respectively. These lesions were responsible for inflammatory pain requiring daily treatment with acetylsalicylic acid. Given the impairment risk, all of the lesions were ineligible for surgical or percutaneous treatment. Patients were successfully treated by 3 to 6 monthly zoledronic acid infusions. All patients experienced complete relief of their symptoms allowing aspirin discontinuation, without any side effects. In the first two cases, CT and MRI control showed nidus mineralization and bone marrow oedema regression, correlating with the pain decrease. After 5years of follow-up, there had been no recurrence of the symptoms. CONCLUSION: In these patients, monthly 4mg zoledronic acid infusions have been safe and effective in the treatment of inaccessible osteoid osteomas.

Three-dimensional Distribution of Muscle and Adipose Tissue of the Thigh at CT: Association with Acute Hip Fracture.

Purpose To evaluate determinants of hip fracture by assessing soft-tissue composition of the upper thigh at CT. Materials and Methods In this retrospective analysis of prospectively collected data, CT studies in 55 female control participants (mean age, 73.1 years ± 9.3 [standard deviation]) were compared with those in 40 female patients (mean age, 80.2 years ± 11.0) with acute hip fractures. Eighty-seven descriptors of the soft-tissue composition were determined. A multivariable best subsets analysis was used to extract parameters best associated with hip fracture. Results were adjusted for age, height, and weight. Results of soft-tissue parameters were compared with bone mineral density (BMD) and cortical bone thickness. Areas under the receiver operating characteristic curve (AUCs) adjusted for multiple comparisons were determined to discriminate fracture. Results The hip fracture group was characterized by lower BMD, lower cortical thickness, lower relative adipose tissue volume of the upper thigh, and higher extramyocellular lipid (EML) surface density. The relative volume of adipose tissue combined with EML surface density (model S1) was associated with hip fracture (AUC, 0.85; 95% confidence interval [CI]: 0.78, 0.93), as well as trochanteric trabecular BMD combined with neck cortical thickness (model B2) (AUC, 0.84; 95% CI: 0.75, 0.92). The model including all four parameters provided significantly better (P < .01) discrimination (AUC, 0.92; 95% CI: 0.86, 0.97) than model S1 or B2. Conclusion In addition to bone mineral density and geometry of the proximal femur, the amount of adipose tissue of the upper thigh and the distribution of the adipocytes in the muscles are significantly associated with acute hip fracture at CT. © RSNA, 2018 Online supplemental material is available for this article.

Prediction of Hip Failure Load: In Vitro Study of 80 Femurs Using Three Imaging Methods and Finite Element Models-The European Fracture Study (EFFECT).

Purpose To evaluate the performance of three imaging methods (radiography, dual-energy x-ray absorptiometry [DXA], and quantitative computed tomography [CT]) and that of a numerical analysis with finite element modeling (FEM) in the prediction of failure load of the proximal femur and to identify the best densitometric or geometric predictors of hip failure load. Materials and Methods Institutional review board approval was obtained. A total of 40 pairs of excised cadaver femurs (mean patient age at time of death, 82 years ± 12 [standard deviation]) were examined with (a) radiography to measure geometric parameters (lengths, angles, and cortical thicknesses), (b) DXA (reference standard) to determine areal bone mineral densities (BMDs), and (c) quantitative CT with dedicated three-dimensional analysis software to determine volumetric BMDs and geometric parameters (neck axis length, cortical thicknesses, volumes, and moments of inertia), and (d) quantitative CT-based FEM to calculate a numerical value of failure load. The 80 femurs were fractured via mechanical testing, with random assignment of one femur from each pair to the single-limb stance configuration (hereafter, stance configuration) and assignment of the paired femur to the sideways fall configuration (hereafter, side configuration). Descriptive statistics, univariate correlations, and stepwise regression models were obtained for each imaging method and for FEM to enable us to predict failure load in both configurations. Results Statistics reported are for stance and side configurations, respectively. For radiography, the strongest correlation with mechanical failure load was obtained by using a geometric parameter combined with a cortical thickness (r(2) = 0.66, P < .001; r(2) = 0.65, P < .001). For DXA, the strongest correlation with mechanical failure load was obtained by using total BMD (r(2) = 0.73, P < .001) and trochanteric BMD (r(2) = 0.80, P < .001). For quantitative CT, in both configurations, the best model combined volumetric BMD and a moment of inertia (r(2) = 0.78, P < .001; r(2) = 0.85, P < .001). FEM explained 87% (P < .001) and 83% (P < .001) of bone strength, respectively. By combining (a) radiography and DXA and (b) quantitative CT and DXA, correlations with mechanical failure load increased to 0.82 (P < .001) and 0.84 (P < .001), respectively, for radiography and DXA and to 0.80 (P < .001) and 0.86 (P < .001) , respectively, for quantitative CT and DXA. Conclusion Quantitative CT-based FEM was the best method with which to predict the experimental failure load; however, combining quantitative CT and DXA yielded a performance as good as that attained with FEM. The quantitative CT DXA combination may be easier to use in fracture prediction, provided standardized software is developed. These findings also highlight the major influence on femoral failure load, particularly in the trochanteric region, of a densitometric parameter combined with a geometric parameter. (©) RSNA, 2016 Online supplemental material is available for this article.

Fat content of hip muscles: an anteroposterior gradient.

BACKGROUND: Despite the importance of the hip muscles in protecting against hip fracture and in the outcome of hip arthroplasty, the variability in their fat content has not been previously studied. Our objectives were to evaluate the variability in the fat content of the hip muscles in a population without myopathy or a need for hip surgery with the use of computed tomography (CT), to study the relationship between hip muscle fat content and physical performance, and to identify medical conditions and lifestyle habits associated with an increase in hip muscle fat content. METHODS: Ten normal subjects without a relevant medical history and ninety-nine consecutive nonsurgical patients without myopathy (age, twenty-one to ninety-four years) underwent a nonenhanced CT scan of the pelvis. Patients were asked to perform physical tests (six-meter walk, repeated chair stands, and Trendelenburg test), and their level of physical activity and medical history were recorded. Evaluation of the fat content of the hip muscles was based on the analysis of four reproducible and representative CT slices with use of custom software. RESULTS: The fat content varied among the muscles, with an anteroposterior gradient from the hip flexors (mean, 2%) to the hip extensors (mean, 10%). This gradient increased after fifty years of age. Fat content also varied considerably among patients. Higher fat content was associated with poorer performance on physical tests, even after adjustment for the cross-sectional area of the muscle (p < 0.05). Higher fat content was also associated with greater age, higher body-mass index, and lower physical activity (p < 0.001). CONCLUSIONS: The observed variability in the fat content of individuals without myopathy or a need for hip surgery should be useful for comparison with future studies of specific populations of patients, such as those with muscle weakness secondary to hip fracture or hip surgery. Simple lifestyle changes such as dietary restriction, increased physical activity, and vitamin D supplementation may decrease muscle fat content and improve physical performance in the elderly.