Surfactant-Free Glibenclamide Nanoparticles: Formulation, Characterization and Evaluation of Interactions with Biological Barriers.

PURPOSE: The aim of this work was to formulate and characterize surfactant-free glibenclamide nanoparticles using Eudragit RLPO and polyethylene glycol as sole stabilizer. METHODS: Glibenclamide nanoparticles were obtained by nanoprecipitation and evaluated in terms of drug content, encapsulation efficiency, apparent saturation solubility, drug release profile, solid state and storage stability. The influence of different stirring speed on the particle size, size distribution and zeta potential of the nanoparticles was investigated. The nanoparticle biocompatibility and permeability were analyzed in vitro on Caco-2 cell line (clone HTB-37) and its interaction with mucin was also investigated. RESULTS: It was found that increasing the molecular weight of polyethylene glycol from 400 to 6000 decreased drug encapsulation, whereas the aqueous solubility and dissolution rate of the drug increased. Particle size of the nanoformulations, with and without polyethylene glycol, were between 140 and 460 nm. Stability studies confirmed that glibenclamide nanoparticles were stable, in terms of particle size, after 120 days at 4°C. In vitro studies indicated minimal interactions of glibenclamide nanoparticles and mucin glycoproteins suggesting favorable properties to address the intestinal mucus barrier. Cell viability studies confirmed the safety profile of these nanoparticles and showed an increased permeation through epithelial cells. CONCLUSION: Taking into consideration these findings, polyethylene glycol is a useful polymer for stabilizing these surfactant-free glibenclamide nanoparticles and represent a promising alternative to improve the treatment of non-insulin dependent diabetes.

Mastering the Gram-negative bacterial barrier - Chemical approaches to increase bacterial bioavailability of antibiotics.

To win the battle against resistant, pathogenic bacteria, novel classes of anti-infectives and targets are urgently needed. Bacterial uptake, distribution, metabolic and efflux pathways of antibiotics in Gram-negative bacteria determine what we here refer to as bacterial bioavailability. Understanding these mechanisms from a chemical perspective is essential for anti-infective activity and hence, drug discovery as well as drug delivery. A systematic and critical discussion of in bacterio, in vitro and in silico assays reveals that a sufficiently accurate holistic approach is still missing. We expect new findings based on Gram-negative bacterial bioavailability to guide future anti-infective research.

Preparation, characterisation and in vitro antibacterial property of ciprofloxacin-loaded nanostructured lipid carrier for treatment of Bacillus subtilis infection.

Context: In this study, controlled ciprofloxacin (CIPRO) nanostrustructured lipid carriers of Precirol® ATO 5/Transcutol® HP (batch A) and tallow fat/Transcutol® HP (batch B) was carreid out. Objective: The aim was to improve solubility and bioavailability of CIPRO. Objective: Study of controlled ciprofloxacin (CIPRO) nanostructured lipid carriers of Precirol® ATO 5/Transcutol® HP (batch A) and tallow fat/Transcutol® HP (batch B). Methods: CIPRO concentrations C1-5 (0.0, 0.2, 0.5, 0.8, and 1.0% w/w) as AC1-5 and BC1-5 were prepared by hot homogenisation and characterised by zetasizer, differential scanning calorimetry, Fourier transform infra-red spectroscopy, in vitro drug release and growth inhibitory zone diameter (IZD) on agar-seeded Bacillus subtilis. Results: AC5 achieved polydispersed particles of ∼605 nm, 92% encapsulation efficiency (EE) and -28 mV similar to BC5 (∼789 nm, 91% EE, and -31 mV). Crystallinity indices (AC5 and BC5) were low at 3 and 5%, respectively. CIPRO release in AC5 was ∼98% in SGF (pH 1.2) and BC5 similarly ∼98% in SIF (pH 6.8). Conclusions: AC5 had superior growth inhibition of B. subtilis at lower concentration (1.2 µg/mL) than BC5 and CIPRO controls; hence could serve as possible sustained delivery system of CIPRO.

Can lifecycle management safeguard innovation in the pharmaceutical industry?

The pharmaceutical industry invests enormous amounts of resources (>€1 billion and >10years) in the development of new products. External factors such as intensifying foreign competition and greater regulatory demands can negatively affect the profit margin, whereas the R&D productivity diminishes. To stay competitive and to maintain high R&D capabilities for developing new medicinal products, companies must make smart investment decisions to maximize their return on investment. Consequently, the entire lifecycle of a medicinal product must be effectively managed to ensure a sustained development through commercialization. This review critically assesses the current situation and the associated management strategies throughout the lifecycle of a medicinal product.

In vitro models for evaluating safety and efficacy of novel technologies for skin drug delivery.

For preclinical testing of novel therapeutics, predictive in vitro models of the human skin are required to assess efficacy, absorption and safety. Simple as well as more sophisticated three-dimensional organotypic models of the human skin emerged as versatile and powerful tools simulating healthy as well as diseased skin states. Besides addressing the demands of research and industry, such models serve as valid alternative to animal testing. Recently, the acceptance of several models by regulatory authorities corroborates their role as important building block for preclinical development. However, valid assessment of readout parameters derived from these models requires suitable analytical techniques. Standard analytical methods are mostly destructive and limited regarding in-depth investigation on molecular level. The combination of adequate in vitro models with modern non-invasive analytical modalities bears a great potential to address important skin drug delivery related questions. Topics of interest are for instance the assessment of repeated dosing effects and xenobiotic biotransformation, which cannot be analyzed by destructive techniques. This review provides a comprehensive overview of current in vitro skin models differing in functional complexity and mimicking healthy as well as diseased skin states. Further, benefits and limitations regarding analytical evaluation of efficacy, absorption and safety of novel drug carrier systems applied to such models are discussed along with a prospective view of anticipated future directions. In addition, emerging non-invasive imaging modalities are introduced and their significance and potential to advance current knowledge in the field of skin drug delivery is explored.

Tight junctions form a barrier in porcine hair follicles.

Follicular penetration has gained increasing interest regarding (i) safety concerns about (environmentally born) xenobiotics available to the hair follicle (HF), e.g. nanomaterials or allergens which should not enter the skin, and (ii) the possibility for non-invasive follicular drug and antigen delivery. However, not much is known about barriers in the HF which have to be surpassed upon uptake and/or penetration into surrounding tissue. Thus, aim of this work was a detailed investigation of this follicular barrier function, as well as particle uptake into the HF of porcine skin which is often used as a model system for human skin for such purposes. We show that follicular tight junctions (TJs) form a continuous barrier from the infundibulum down to the suprabulbar region, complementary to the stratum corneum in the most exposed upper follicular region, but remaining as the only barrier in the less accessible lower follicular regions. In the bulbar region of the HF no TJ barrier was found, demonstrating the importance of freely supplying this hair-forming part with e.g. nutrients or hormones from the dermal microenvironment. Moreover, the dynamic character of the follicular TJ barrier was shown by modulating its permeability using EDTA. After applying polymeric model-nanoparticles (154 nm) to the skin, transmission electron microscopy revealed that the majority of the particles were localized in the upper part of the HF where the double-barrier is present. Only few penetrated deeper, reaching regions where TJs act as the only barrier, and no particles were observed in the bulbar, barrier-less region. Lastly, the equivalent expression and distribution of TJ proteins in human and porcine HF further supports the suitability of porcine skin as a predictive model to study the follicular penetration and further biological effects of dermally applied nanomaterials in humans.

Preclinical safety and efficacy models for pulmonary drug delivery of antimicrobials with focus on in vitro models.

New pharmaceutical formulations must be proven as safe and effective before entering clinical trials. Also in the context of pulmonary drug delivery, preclinical models allow testing of novel antimicrobials, reducing risks and costs during their development. Such models allow reducing the complexity of the human lung, but still need to reflect relevant (patho-) physiological features. This review focuses on preclinical pulmonary models, mainly in vitro models, to assess drug safety and efficacy of antimicrobials. Furthermore, approaches to investigate common infectious diseases of the respiratory tract, are emphasized. Pneumonia, tuberculosis and infections occurring due to cystic fibrosis are in focus of this review. We conclude that especially in vitro models offer the chance of an efficient and detailed analysis of new antimicrobials, but also draw attention to the advantages and limitations of such currently available models and critically discuss the necessary steps for their future development.

Particle based vaccine formulations for transcutaneous immunization.

Vaccine formulations on the basis of nano- (NP) or microparticles (MP) can solve issues with stabilization, controlled release, and poor immunogenicity of antigens. Likewise transcutaneous immunization (TCI) promises superior immunogenicity as well as the advantages of needle-free application compared with conventional intramuscular injections. Thus the combination of both strategies seems to be a very valuable approach. However, until now TCI using particle based vaccine formulations has made no impact on medical practice. One of the main difficulties is that NPs and MPs cannot penetrate the skin to an extent that would allow the application of the required dose of antigen. This is due to the formidable stratum corneum (SC) barrier, the limited amount of antigen in the formulation and often an insufficient immunogenicity. A multitude of strategies are currently under investigation to overcome these issues. We highlight selected methods presenting a spectrum of solutions ranging from transfollicular delivery, to devices disrupting the SC barrier and the combination of particle based vaccines with adjuvants discussing their advantages and shortcomings. Some of these are currently at an experimental state while others are already in clinical testing. All methods have been shown to be capable of transcutaneous antigen delivery.

Improved photostability and reduced skin permeation of tretinoin: development of a semisolid nanomedicine.

The aims of this work were to increase the photostability and to reduce the skin permeation of tretinoin through nanoencapsulation. Tretinoin is widely used in the topical treatment of various dermatological diseases such as acne, psoriasis, skin cancer, and photoaging. Tretinoin-loaded lipid-core polymeric nanocapsules were prepared by interfacial deposition of a preformed polymer. Carbopol hydrogels containing nanoencapsulated tretinoin presented a pH value of 6.08±0.14, a drug content of 0.52±0.01 mg g(-1), pseudoplastic rheological behavior, and higher spreadability than a marketed formulation. Hydrogels containing nanoencapsulated tretinoin demonstrated a lower photodegradation (24.17±3.49%) than the formulation containing the non-encapsulated drug (68.64±2.92%) after 8h of ultraviolet A irradiation. The half-life of the former was seven times higher than the latter. There was a decrease in the skin permeability coefficient of the drug by nanoencapsulation, independently of the dosage form. The liquid suspension and the semisolid form provided K(p)=0.31±0.15 and K(p)=0.33±0.01 cm s(-1), respectively (p≤0.05), while the samples containing non-encapsulated tretinoin showed K(p)=1.80±0.27 and K(p)=0.73±0.12 cm s(-1) for tretinoin solution and hydrogel, respectively. Lag time was increased two times by nanoencapsulation, meaning that the drug is retained for a longer time on the skin surface.