[Critical quality attribute assessment of big brand traditional Chinese medicine: study on NIR field detection method of chemical properties of moisture in Tongren Niuhuang Qingxin Pills].

For the field detection problems of critical quality attribute(CQA) of moisture content in traditional Chinese medicine(TCM) manufacturing process, big brand TCM Tongren Niuhuang Qingxin Pills were used as the carrier, to establish a moisture content NIR field detection model with or without cellophane in real world production with use of near infrared(NIR) spectroscopy combined with stoichiometry. With the moisture content determined by drying method as reference value, the partial least square method(PLS) was used to analyze the correlation between the spectrum and the moisture reference value. Then the spectral pretreatment methods were screened and optimized to further improve the accuracy and stability of the model. The results showed that the best quantitative model was developed by the spectral data pretreatment of standard normal variate(SNV) with the latent variable factor number of 2 and 7 of Tongren Niuhuang Qingxin Pills with or without cellophane samples. The prediction coefficient of determination(R_(pre)~2) and standard deviation of prediction(RMSEP) of the model with cellophane samples were 0.765 7 and 0.157 2%; R_(pre)~2 and RMSEP of the model without cellophane samples were 0.772 2 and 0.207 8%. The NIR quantitative models of moisture content of Tongren Niuhuang Qingxin Pills with and without cellophane both showed good predictive performance to realize the rapid, accurate and non-destructive quantitative analysis of moisture content in such pills, and provide a method for the field quality control of the critical chemical attributes of moisture in the manufacturing of big brand TCM.

[Critical quality attribute assessment of big brand traditional Chinese medicine: modular identification of Tongren Niuhuang Qingxin Pills based on efficacy with chemical properties].

Identification of critical quality attribute(CQA) is crucial in quality control of Tongren Niuhuang Qingxin Pills(TRNHQXP). In this study, 661 active components in TRNHQXP were selected by liquid chromatography-mass spectrometry(LC-MS) and network pharmacology based on reported data and TCMSP, BATMAN-TCM, and TCMID databases, as well as mass spectrometry data, and 1 413 targets of the active components were obtained through SwissTargetPrediction. The 152 potential targets obtained from the intersection of predicted targets with 456 stroke targets underwent functional enrichment analysis by Metascape. The 27 Chinese medicinals in TRNHQXP were divided into four sets according to efficacies. Thirty-seven key targets in the blood-activating and stasis-resolving set and 41 in the tonifying set were screened out. On the basis of these potential key targets, 137 potential key CQA of TRNHQXP for stroke were reversely predicted. This study revealed the possible mechanism of TRNHQXP in treating stroke and established a modular identification method for the potential CQA of big brand traditional Chinese medicine(TCM) based on efficacies and chemical properties. Consequently, the CQA of TRNHQXP were identified by this method, which has provided a reference for the following experimental studies of CQA.

[Criticalquality attribute assessment of big brand traditional Chinese medicine: visualization method for quality control of Ginkgo Leaves Tablets based on spatial distribution uniformity].

Spatial distribution uniformity is the critical quality attribute(CQA) of Ginkgo Leaves Tablets, a variety of big brand traditional Chinese medicine. The evaluation of the spatial distribution uniformity of active pharmaceutical ingredients(APIs) in Ginkgo Leaves Tablets is important in ensuring their stable and controllable quality. In this study, hyperspectral imaging technology was used to construct the spatial distribution map of API concentration based on three prediction models, further to realize the visualization research on the spatial distribution uniformity of Ginkgo Leaves Tablets. The region of interest(ROI) was selected from each Ginkgo Leaves Tablet, with length and width of 50 pixels, and a total of 2 500 pixels. Each pixel had 288 spectral channels, and the number of content prediction data could reach 1×10~5 for a single sample. The results of the three models showed that the Partial Least Squares(PLS) model had the highest prediction accuracy, with calibration set determination coefficient R_(pre)~2 of 0.987, prediction set determination coefficient R_(pre)~2 of 0.942, root mean square error of calibration(RMSEC) of 0.160%, and root mean square error of prediction(RMSEP) of 0.588%. The classical least-squares(CLS) model had a greater prediction error, with the RMSEP of 0.867%. Multivariate Curve Resolution-Alternating Least Square(MCR-ALS) model showed the worst predictive ability among the three models, and it couldn't realize content prediction. Based on the prediction results of PLS and CLS models, the spatial distribution map of APIs concentration was obtained through three-dimensional data reconstruction. Furthermore, histogram method was used to evaluate the spatial distribution uniformity of API. The data showed that the spatial distribution of APIs in Ginkgo Leaves Tablets was relatively uniform. The study explored the feasibility of visualization of spatial distribution of Ginkgo Leaves Tablets based on three models. The results showed that PLS model had the highest prediction accuracy, and MCR-ALS model had the lowest prediction accuracy. The research results could provide a new strategy for the visualization method of quality control of Ginkgo Leaves Tablets.

[Research of hospital preparations based on QbD concept: whole process optimization strategy of gynecological antipruritic lotion].

The stable quality of hospital preparations is the basis for their clinical efficacy. Gynecological antipruritic prescription is widely used in gynecology clinics of Chinese medicine hospitals. Therefore,in this study,the production process of gynecological antipruritic lotion was optimized based on the concept of quality by design( QbD). The production process of the gynecological antipruritic lotion was developed to ensure its process stability and reliable quality,and enhance its clinical applicability. With total amount of matrine and oxymatrine used as the critical quality attribute( CQA) of the production process,parameter levels were designed based on production practice of hospital preparations,and Plackett-Burman and Box-Behnken experiments were used to optimize the water extraction and alcohol precipitation process of antipruritic lotion based on CQA of intermediates and final product. The soaking time,the first extraction time,and the second extraction time were determined as the critical process parameters( CPPs) of the production process. The optimal preparation process was as follows: water volume of 8 times,soaking for 0. 5 h,extraction for 2 times,the first extraction for 30 min,the second extraction for 56 min,alcohol concentration of 50%,and alcohol precipitation for 3 h. Furthermore,the design space was established based on the binomial regress model between CPPs and CQA,so as to set the optimization target and risk range; and the control space was displayed by overlay plot. The results of three repeated experiments in the control space showed that the relative standard deviation( RSD) of CQA was 4. 70%,and the similarity of chromatogram for gynecological antipruritic lotion was 0. 978,0. 974,and 0. 998,respectively. The above results indicated that the operation in the control space can guarantee the quality and stability of gynecological antipruritic lotion,suitable for practical application.