[Dissolution test and evaluation of Guizhi Fuling Capsules].

Because of the complex components, simple content determination can hardly reflect the overall quality of Guizhi Fuling Capsules. Therefore, it is necessary to carry out a multi-component dissolution test. The variability of quality among different batches of products from different manufacturers is a common problem of Chinese medicine solid preparations. To comprehensively control the quality of Guizhi Fuling Capsules, we studied the dissolution behaviors of 7 index components in the capsules under different conditions, and investigated the consistency of dissolution behaviors among different batches of products from the same manufacturer. The basket method of general rule 0931 in Chinese Pharmacopoeia was adopted, and the rotating speeds were set at 50, 75, and 100 r·min~(-1), respectively. The hydrochloric acid solution(pH 1.2), acetate buffer solution(pH 4.0), pure water, and phosphate buffer solution(pH 6.8) were used as the dissolution media. Automatic sampling was carried out at the time points of 5, 10, 20, 30, 45, and 60 min, respectively. The cumulative dissolution of 7 index components was measured through ultra-performance liquid chromatography(UPLC). The difference factor f_1 and similarity factor f_2 were calculated to comprehensively evaluate the similarity of the dissolution curves among 8 batches of Guizhi Fuling Capsules, and a variety of dissolution and release equations were fitted. The results showed that multiple components had faster dissolution rates at higher rotating speed and in hydrochloric acid medium. The 8 batches of Guizhi Fuling capsules showed the average f_1 value lower than 15 and the average f_2 value higher than 50, which indicated that different batches of products had similar dissolution behaviors. Most components had synchronous dissolution behaviors and similar release cha-racteristics. This study provides a reference for the quality consistency evaluation among batches, processing optimization, and dosage form improvement of Guizhi Fuling Capsules.

Intestinal microbiomics and liver metabolomics insights into the preventive effects of chromium (III)-enriched yeast on hyperlipidemia and hyperglycemia induced by high-fat and high-fructose diet.

In recent years, organic chromium (III) supplements have received increasing attentions for their low toxicity, high bioavailability and wide range of health-promoting benefits. This study aimed to investigate the preventive effects of chromium (III)-enriched yeast (YCr) on high-fat and high-fructose diet (HFHFD)-induced hyperlipidemia and hyperglycemia in mice, and further clarify its mechanism of action from the perspective of intestinal microbiomics and liver metabolomics. The results indicated that oral administration of YCr remarkably inhibited the aberrant elevations of body weight, blood glucose and lipid levels, hepatic cholesterol (TC) and triglyceride (TG) levels caused by HFHFD. Liver histological examination showed that oral YCr intervention inhibited HFHFD induced liver lipid accumulation. Besides, 16S rDNA amplicon sequencing showed that YCr intervention was beneficial to ameliorating intestinal microbiota dysbiosis by altering the proportion of some intestinal microbial phylotypes. Correlation-based network analysis indicated that the key intestinal microbial phylotypes intervened by YCr were closely related to some biochemical parameters associated with glucose and lipid metabolism. Liver metabolomics analysis revealed that dietary YCr intervention significantly regulated the levels of some biomarkers involved in purine metabolism, glycerophospholipid metabolism, citrate cycle, pyrimidine metabolism, glycerophospholipid metabolism, phenylalanine, tyrosine and tryptophan biosynthesis, and so on. Moreover, dietary YCr intervention regulated the mRNA levels of key genes associated with glucose, cholesterol, fatty acids and bile acids metabolism in liver. These findings suggest that dietary YCr intervention has beneficial effects on glucose and lipid metabolism by regulating intestinal microbiota and liver metabolic pathway, and thus can be served as a functional component to prevent hyperlipidemia and hyperglycemia.

[Determination of five saponins in Xuesaitong Dropping Pills by micellar electrokinetic chromatography and evaluation method of between-batch consistency].

The present study determined five saponins in Xuesaitong Dropping Pills(XDP) by micellar electrokinetic chromatography(MEKC), and evaluated between-batch consistency by MEKC fingerprints and similarity analysis. A background buffer was composed of 20 mmol·L~(-1) sodium tetraborate-20 mmol·L~(-1) boric acid solution(pH 8.5), 55 mmol·L~(-1) sodium dodecyl sulfate(SDS), 23 mmol·L~(-1) ß-cyclodextrin, and 13% isopropyl alcohol. All separations were performed at 25 ℃,20 kV and the detection wavelength was set at 203 nm. The separation channel was a fused silica capillary with a dimension of 75 µm I.D. and a total length of 50.2 cm(effective length of 40.0 cm). The contents of notoginsenoside R_1, and ginsenosides Rg_1, Re, Rb_1, Rd were determined with their quality control ranges set. The fingerprints of XDP were established and the between-batch consistency was evaluated by similarity analysis. The contents of five saponins from the 19 batches of XDP were stable in the fixed ranges. Statistical analysis was carried out on the results of multiple batches of samples, and the specific quality control ranges were recommended as follows: notoginsenoside R_1 21.92-34.16 mg·g~(-1), ginsenosides Rg_1 83.54-131.78 mg·g~(-1), ginsenosides Re 13.58-19.82 mg·g~(-1), ginsenosides Rb_1 89.40-129.90 mg·g~(-1), and ginsenosides Rd 22.34-35.67 mg·g~(-1). Eleven characteristic peaks were identified in the fingerprints. Five peaks, notoginsenoside R_1 and ginsenosides Rg_1, Re, Rb_1, Rd, were identified with reference standards. The similarities of the 19 batches of samples were all above 0.988, indicating good between-batch consistency. This method is green and simple, and can be used for the quantitative determination and quality evaluation of XDP. It can also provide references for the quality control of other Chinese medicinal dripping pills.

[Research progress on chemical constituents and quality control methods of Succus Bambusae].

Through the investigation of a large number of both domestic and overseas literatures and related quality standards, chemical compositions, quality evaluation system and quality control methods of Succus Bambusae were systematic summarized in this study. There were abundant chemical constituents in Succus Bambusae, mainly including volatile ingredients, amino acids, flavonoids, trace elements and vitamins, with high medicinal and edible value. The quality control methods involved traditional morphological identification, spectroscopy, chromatography and other techniques. However, the current quality standards of Succus Bambusae are relatively low, lacking safety indicators, and cannot effectively ensure its quality, seriously affecting the safety and effectiveness of its clinical use. Therefore, it is particularly important to establish a set of highly sensitive and specific quality evaluation system for Succus Bambusae. In this paper, the current research status of the chemical compositions and quality standards of Succus Bambusae were reviewed, with the purpose of providing a basis for further improvement of its quality evaluation system.

[Identification of critical influencing factors in dropping process of Xuesaitong Dropping Pills].

With the dropping process of Xuesaitong Dropping Pills(XDP) as the study object, critical factors affecting the quality indicators of pill pass rate, average weight of drop pills and roundness were screened out, so as to deepen the understanding of the dropping process. The critical process units, critical quality attributes and potential critical process influencing factors of XDP were determined by risk analysis and prior knowledge, and then the critical influencing factors were screened out by Plackett-Burman design. First, according to the risk assessment, the critical technique of XDP preparation process was dropping, and then the critical quality attributes of dropping process were pill pass rate, average weight of drop pills and roundness. Then, according to fishbone diagram and failure mode and effects analysis(FMEA), potential critical influencing factors were determined as flow rate, matrix ratio, solid-liquid ratio, feed-liquid temperature, top temperature of condensate, bottom temperature of condensate and dropping distance. Finally, among these seven potential factors, the critical influencing factors were determined as material liquid ratio, dropping distance, top temperature of condensate, bottom temperature of condensate. This study revealed the potential of Plackett-Burman design in screening and understanding the influence of selected factors on XDP dropping process, which could provide a reference for studying the dropping process.

Current Treatment Modalities for Osteonecrosis of Femoral Head in Mainland China: A Cross-Sectional Study.

OBJECTIVE: To investigate the application of treatment modalities for patients with osteonecrosis of the femoral head (ONFH) in mainland China. METHODS: This cross-sectional study was based on the online application of China Osteonecrosis of the Femoral Head Database (CONFHD). Between July 2016 to December 2018, the CONFHD program planned to recruit ONFH patients from 12 administrative areas across mainland China. Real-world medical records of treatment regimens for these patients, including surgeries and prescriptions, were approved to upload to the CONFHD application for further analysis. The surgeries performed on these patients were classified into total hip arthroplasty and hip-preserving procedures, and the latter was further classified into core decompression, bone grafting, and tantalum rod implantation. Prescription medications were classified into chemical medicine and Chinese herbal medicine (CHM); chemical medicine was further classified according to their chemical compounds, and CHM was classified according to therapeutic functions based on traditional Chinese medicine theory. Descriptive analysis was performed to summarize the application of different treatment regimens on the overall sample. RESULTS: A total of 1491 patients (2381 hips) who fulfilled the protocol criteria were included. There were 1039 males and 452 females with a mean age of 47.29 ± 12.69 years. The causes of ONFH were alcoholism in 642 patients (43%), corticosteroid in 439 patients (29%), trauma in 239 patients (16%), and idiopathic ONFH in 171 patients (11%). Operative treatments (including total hip arthroplasty and hip-preserving procedures) were performed on 49% of patients (43% of hips), chemical medicine therapy (including bisphosphonate, statins, and prostacyclin) was given to 37% of patients (37% of hips), and CHM was administrated to 72% of patients (75% of hips). The aforementioned interventions were not always used alone, since 47% of patients (52% of hips) received combined regimens with multiple interventions. Among hips treated by surgery, all hips with ARCO stage IV ONFH received THA (305 hips), and THA was also performed on 63 hips with stage II ONFH. Over half of hips with stage I (81%), II (91%), and III (92%) ONFH had received pharmacological treatments. Prostacyclin and bisphosphonate were the top two most prescribed medicines used alone. CHM therapies with multiple CHM functions were more commonly prescribed. CONCLUSION: Current treatment modalities for ONFH patients in mainland China include operative treatment, chemical medicine, and CHM. Combined regimens with different treatment modalities are common in real-world clinical practices.

[Comparative study on dissolution behavior of Fufang Danshen Pian].

To compare the quality of Fufang Danshen Pian, the dissolution behaviors of 7 index components in Fufang Danshen Pian in different batches and from different manufacturers in 4 kinds of dissolution mediums, and evaluate by multiple dissolution curves. The dissolution test was carried out by the paddle method, with pH 1.2 hydrochloride buffer, pH 4.0 acetate buffer, distilled water and pH 6.8 phosphate buffer as dissolution medium. The rotation speed was 75 r·min~(-1). The content of 7 index components at each sampling point was measured by HPLC. The accumulative dissolution rate was calculated, the cumulative dissolution curve was drawn, and the dissolution models were fitted. The dissolution behaviors and the dissolution curve fitting equations of Fufang Danshen Pian in different batches and from different manufacturers in different dissolution mediums were quite different. The dissolution of the same preparation from different manufactures was different in the same dissolution medium, and the dissolution of different index components from the same manufacturer was not synchronized in the same dissolution medium; the dissolution behaviors of Fufang Danshen Pian in different batches and from different manufacturers in the same dissolution medium were different and greatly affected by pH value, indicating differences in the quality of Fufang Danshen Pian in different batches and from different manufacturers. This study provides scientific basis for the improvement in preparation process and the evaluation of batch consistency of Fufang Danshen Pian.

[Qualitative and quantitative analysis of Rhodobryum giganteum by using nonlinear oscillating chemical fingerprint technique].

A new method for qualitative and quantitative analysis of Rhodobryum giganteum by using the nonlinear oscillating chemical was established for improving the quality control standard of R. giganteum. Its potential(E)/time(t) curve was recorded by electrochemical workstation in the oscillation reaction system of BrO~-_3-Ce(SO_4)_2-H_2SO_4-malonic acid/tartaric acid. The nonlinear oscillating chemical fingerprints were investigated for repeatability, and it was found that the RSD values of the four characteristic parameters of R. giganteum were less than 4.1%, indicating a good repeatability and high precision of this experiment. After optimizing the experimental parameters such as particle size, rotation speed and temperature, a new method based on nonlinear oscillating chemical was used for qualitative and quantitative analysis of R. giganteum. The results showed that there was a good linear relationship between the induction time/the period of oscillation and the dosage of herbs(0.1-1.1 g), with the relative coefficients of 0.978 and 0.975, respectively. Besides, the highest potential showed a nonlinear relationship with the dosage of herbs, with the relative coefficient of 0.999. This method was also used to discriminate the R. giganteum and R. roseum. They were similar in appearance, but their fingerprints were quite different. Independent sample t test results showed that there were significant differences in the oscillation time, the maximum amplitude and the induction time, providing a basis for the identification of the basic sources of Herba Rhodobryi Rasei.

[Research progress on quality control methods of traditional Chinese medicine glues].

Traditional Chinese medicine( TCM) glues,including leather glues,horn glues,nail glues and bone glues,have a long application history and unique characteristics. In recent years,their market demand has increased year by year because of their remarkable curative efficacy and nourishing effects,which leads to insufficient supply of raw material resources,and widespread use of fake and inferior products,seriously affecting the reputation of TCM glues and drug safety. In this context,the establishment of a more specific quality detection method for the TCM glues according to their specific characteristics can effectively improve the quality control level,promote rational use,and have a far-reaching impact on the industrial development of TCM glues. In this paper,the classification of TCM glues,as well as the production and application status of their representative( Ejiao) were briefly introduced; the papers on quality control technologies of TCM glues,including traditional identification experience,authenticity identification,physical property determination,protein,peptide and amino acid contents determination,element analysis,biological evaluation,and brand protection technology of TCM glues,were reviewed,and their advantages and disadvantages were summarized and analyzed comprehensively.Based on the specific characteristics of TCM glues,such as complex material basis,unclear pharmacodynamic components and different production processes,it was proposed in this paper to research and develop information-rich,convenient,fast,and non-destructive analytical techniques for the quality control of TCM glues and brand protection of famous products,thus promoting the healthy development of TCM glues industry.

[Application of feedforward control strategy based on spectra of raw materials to optimize alcohol extraction process of Panax notoginseng].

In this work, we obtained the quality information of Panax notoginseng with near infrared spectroscopy in an efficient way. By combining the quality information of raw materials with process parameters in experimental design, quantitative relationship models were established between material quality information, process parameters and product quality of P. notoginseng, thus realizing the feedforward control of the alcohol extraction process. The quantitative models established have high robustness and satisfactory forecasting ability. With new batches of P. notoginseng introduced for the alcohol extraction process, the quality information of raw materials was rapidly obtained. Based on the established models, the process parameters were optimized according to the expected critical quality attributes (CQA), thereby reducing the fluctuation of product quality caused by raw material variation.

[Primary exploration of key influential factors recognization method of Tanreqing injection].

To recognize the key influential factors during the liquid preparation process of Tanreqing injection, the near infrared(NIR) spectra of the raw materials and the operating parameters of 24 batches of physical manufacturing were recorded as independent variables, and the total soluble solids contents and the light inspection acceptance rate of the final products were collected as dependent variables. The calibration models were developed using the partial least-square regression (PLSR) method, and the correlation coefficients between the independent variables and the dependent variables were calculated. For the quantitative models, the correlation coefficients for the calibration and inner cross validation of total soluble solids contents and the light inspection acceptance rate reached 0.911 9, 0.724 2 and 0.873 8, 0.795 9, respectively. Using the correlation coefficients diagrams, several key influence factors were preliminarily determined, and the physical significance were analyzed combined with production experience. This work demonstrated that NIR spectroscopy with PLSR algorithm could be used for the key influential factors recognization during the liquid preparation process of Tanreqing injection and can be popularized to solve similar problems..

Rapid quantification of multi-components in alcohol precipitation liquid of Codonopsis Radix using near infrared spectroscopy (NIRS).

A near infrared spectroscopy (NIRS) approach was established for quality control of the alcohol precipitation liquid in the manufacture of Codonopsis Radix. By applying NIRS with multivariate analysis, it was possible to build variation into the calibration sample set, and the Plackett-Burman design, Box-Behnken design, and a concentrating-diluting method were used to obtain the sample set covered with sufficient fluctuation of process parameters and extended concentration information. NIR data were calibrated to predict the four quality indicators using partial least squares regression (PLSR). In the four calibration models, the root mean squares errors of prediction (RMSEPs) were 1.22 µg/ml, 10.5 µg/ml, 1.43 µg/ml, and 0.433% for lobetyolin, total flavonoids, pigments, and total solid contents, respectively. The results indicated that multi-components quantification of the alcohol precipitation liquid of Codonopsis Radix could be achieved with an NIRS-based method, which offers a useful tool for real-time release testing (RTRT) of intermediates in the manufacture of Codonopsis Radix.

Manufacturer identification and storage time determination of "Dong'e Ejiao" using near infrared spectroscopy and chemometrics.

We have developed a set of chemometric methods to address two critical issues in quality control of a precious traditional Chinese medicine (TCM), Dong'e Ejiao (DEEJ). Based on near infrared (NIR) spectra of multiple samples, the genuine manufacturer of DEEJ, e.g. Dong'e Ejiao Co., Ltd., was accurately identified among 21 suppliers by the fingerprint method using Hotelling T(2), distance to Model X (DModX), and similarity match value (SMV) as discriminate criteria. Soft independent modeling of the class analogy algorithm led to a misjudgment ratio of 6.2%, suggesting that the fingerprint method is more suitable for manufacturer identification. For another important feature related to clinical efficacy of DEEJ, storage time, the partial least squares-discriminant analysis (PLS-DA) method was applied with a satisfactory misjudgment ratio (15.6%) and individual prediction error around 1 year. Our results demonstrate that NIR spectra comprehensively reflect the essential quality information of DEEJ, and with the aid of proper chemometric algorithms, it is able to identify genuine manufacturer and determine accurate storage time. The overall results indicate the promising potential of NIR spectroscopy as an effective quality control tool for DEEJ and other precious TCM products.

The occurrence and fate of siloxanes in wastewater treatment plant in Harbin, China.

The occurrence and fate of four cyclic (D3 to D6) and 10 linear (L5 to L14) siloxanes were investigated in influent and effluent wastewater, sludge from a wastewater treatment plant (WWTP), and surrounding air and soil within the WWTP in Harbin, Northeast China. The mean concentrations of total siloxanes in influent and effluent were 4780 and 997 ng/L and in excess sludge and aerobic sludge were 25.1 and 32.3 µg/g dw, respectively. The concentrations in air and soil within the WWTP were 243 ng/m(3) and 4960 ng/g dw, respectively. A similar composition profile of siloxanes in influent and sludge suggests their same source. Seasonal variation with concentration was comprehensively studied. It was found that temperature and rainfall are the two important factors for the seasonal variation of siloxanes. Adsorption with sewage sludge was the major way for the removal of siloxanes during the municipal wastewater treatment process. Overall, on a daily basis, the mass loading of the Σsiloxanes into the WWTP, out of the WWTP with the effluent and sludge, were estimated to be 3.0, 0.6 and 1.3 kg, respectively. In general, 21 % of siloxanes were discharged into the receiving body (Songhua River), 43 % of siloxanes were absorbed on sludge, and 36 % of siloxanes were lost during the whole process of WWTP.

[Near infrared spectroscopy based process trajectory technology and its application in monitoring and controlling of traditional Chinese medicine manufacturing process].

In this paper, the principle of NIRS (near infrared spectroscopy)-based process trajectory technology was introduced.The main steps of the technique include:① in-line collection of the processes spectra of different technics; ② unfolding of the 3-D process spectra;③ determination of the process trajectories and their normal limits;④ monitoring of the new batches with the established MSPC (multivariate statistical process control) models.Applications of the technology in the chemical and biological medicines were reviewed briefly. By a comprehensive introduction of our feasibility research on the monitoring of traditional Chinese medicine technical process using NIRS-based multivariate process trajectories, several important problems of the practical applications which need urgent solutions are proposed, and also the application prospect of the NIRS-based process trajectory technology is fully discussed and put forward in the end.

[Research progress on standardization study of NIR spectroscopy based method for quality control of traditional Chinese medicine].

In recent years, the near infrared (NIR) spectroscopy has gained wide acceptance within the quantitative analysis of traditional Chinese medicine (TCM). However, the lack of technical standards is the bottleneck problem in this process. To address this issue, standardization study of the NIR spectroscopy based method for the quantitative analysis of TCM is needed, in which the specific characteristics of TCM should be given full considerations. The main research contents include:the scope definition for the application of NIR spectroscopy in the TCM quantitative analysis field, the selection criteria for the sample pretreatment and spectral acquisition conditions, the rules for the model optimization and evaluation, and the regulations for the model update and transfer. In this paper, some foreign studies in the agricultural areas are reviewed for reference. Different chemometrics methods reported in the literature are investigated and compared systematically. This research is important actual significance to the theoretical development of NIR spectroscopy analytical techniques, and will effectively promote the application of the technology in the TCM industry. Furthermore, it is beneficial to improve the technical level of TCM quality control, and can also be used as references to achieve similar purposes for other natural products.

[Research progress on method validation of near infrared spectroscopy in quantitative analysis].

Due to the advantages of fast and noninvasive, requiring almost no sample preparation, supplying chemical and physical information, near infrared (NIR) spectroscopy is widely used in the pharmaceutical industry. In the life cycle of an established analytical method, rigorous validation should be performed before routine use. However,there is no detailed experimental standards or decision rules for the NIR methods validation currently, and various approaches were applied to validate the established NIR quantification models in literatures.In this paper, progress on the validation of NIR methods developed for the pharmaceutical application was reviewed, concentrating on the standard documents and main ideas of validation.It will provide references for the standardized application of NIR spectroscopy in the pharmaceutical industries.

[Construction of NIRS-based total quality control system for compound Ejiao oral liquid and relative thinking].

In this paper, near infrared spectroscopy (NIRS)-based total quality control system of compound Ejiao oral liquid is introduced briefly, including the quality control of raw traditional Chinese medicine (TCM) materials, monitoring and control of the extract and the alkaline precipitation technics, and also the inspection of finished products in both open bottle and non-opening modes. By analyzing and summing up the significance and difficulties, several important problems in the practical applications of NIRS technology are proposed, which will provide references for the similar studies of other TCM products.

[Simultaneous determination of six components in water extract and alcohol precipitation liquid in Astragali Radix by HPLC-UV-ELSD].

A HPLC-UV-ELSD method was established for simultaneous determination of six components in two intermediates of Shenqi Fuzheng injection (SFI) and the feasibility of establishing quantitative analysis of multi-components by single marker (QAMS) methods on different detectors was further explored. Calycosin-7-O-ß-D-glucoside and astragloside Ⅳ were selected as internal reference substances for respectively flavonoids and saponins, and relative correlation factors (RCF) of formononetin-7-O-ß-D-glucoside, 9, 10-dimethoxypterocarpan-3-O-ß-D-glucopyranoside, 2'-dihydroxy-3', 4'-dimethoxyisoflavan-7-O-ß-D-glucopyranoside and astragloside Ⅱ were calculated. Eventually, quantitative results of the 14 samples were compared between QAMS and external standard method. The sample concentrations calculated by QAMS were similar with concentrations calculated by external standard method, and the absolute values of relative deviations were generally less than 5% according to the UV detection of flavonoids. On the basis of ELSD detection for saponins, however, the absolute values of relative deviation of the two methods ranged from 0.48% to 23.17%. The QAMS method built on ultraviolet (UV) detectors was stable and can be used as a substitute method to reduce the consumption of standard compounds; meanwhile, the accuracy of QAMS method built on evaporative light scattering detector (ELSD) was inferior to that of external standard method, and the working principle of ELSD and feasible concentration range remain to be further studied.

[NIRS-based total quality control system construction of Tanreqing injection and relative thinking].

In this paper, NIRS (near infrared spectroscopy)-based total quality control system for the Tanreqing injection was introduced briefly. By analyzing and summing up the significance and difficulties, several important problems of the practical applications which need urgent solutions are proposed. And also the applicationprospect of NIRS is fully discussed and put forward in the end.