RESUMO
Nano zero-valent manganese (nZVMn) is theoretically expected to exhibit high reducibility and adsorption capacity, yet its feasibility, performance, and mechanism for reducing and adsorbing hexavalent uranium (U(VI)) from wastewater remain unclear. In this study, nZVMn was prepared via borohydride reduction, and its behaviors about reduction and adsorption of U(VI), as well as the underlying mechanism, were investigated. Results indicated that nZVMn exhibited a maximum U(VI) adsorption capacity of 625.3 mg/g at a pH of 6 and an adsorbent dosage of 1 g/L, and the co-existing ions (K+, Na+, Mg2+, Cd2+, Pb2+, Tl+, Cl-) at studied range had little interference on U(VI) adsorption. Furthermore, nZVMn effectively removed U(VI) from rare-earth ore leachate at a dosage of 1.5 g/L, resulting in a U(VI) concentration of lower than 0.017 mg/L in the effluent. Comparative tests demonstrated the superiority of nZVMn over other manganese oxides (Mn2O3 and Mn3O4). Characterization analyses, including X-ray diffraction and depth profiling X-ray photoelectron spectroscopy, combined with density functional theory calculation revealed that the reaction mechanism of U(VI) using nZVMn involved reduction, surface complexation, hydrolysis precipitation, and electrostatic attraction. This study provides a new alternative for efficient removal of U(VI) from wastewater and improves the understanding of the interaction between nZVMn and U(VI).
Assuntos
Manganês , Urânio , Manganês/análise , Urânio/análise , Águas Residuárias , Adsorção , Água/química , Íons , Concentração de Íons de Hidrogênio , CinéticaRESUMO
Recovering phosphorus (P) from waste streams takes the unique advantage in simultaneously addressing the crisis of eutrophication and the shortage of P resource. A novel calcium decorated sludge carbon (Ca-SC) was developed from dyeing industry wastewater treatment sludge by decorating calcium (Ca) to effectively adsorb phosphorus from solution. The X-ray diffraction (XRD) and Fourier transform infrared (FTIR) techniques were used to characterize the Ca-SCs, followed by isotherm and kinetic sorption experiments. A preferred design with CaCO3 to sludge mass ratio of 1:2 was found to have a sorption capacity of 116.82 mg/g for phosphorus. This work reveals the crucial role of well-dispersed nano-rod calcium on the Ca-SC surface for the sorption of phosphorus. Moreover, the decoration of nano-rod calcium was found to further promote the uptake of phosphorus through the formation of hydroxylapatite (Ca5(PO4)3(OH)). Thus, the development of decorated Ca-SC for sorption of phosphorus is very important in solving the P pollution and resource loss.
Assuntos
Cálcio/química , Carbono/química , Nanoestruturas/química , Fósforo/química , Eliminação de Resíduos Líquidos/métodos , Adsorção , Cinética , Fósforo/análise , Esgotos , Águas Residuárias/química , Difração de Raios XRESUMO
Discharging phosphorus (P)-contaminated water directly into the aquatic environment leads to resource loss and eutrophication. Thus, removing P from waste streams is imperative. In this study, calcium-decorated biochar (Ca-BC) in different mass ratios of Ca to BC was designed to effectively adsorb P from solution. Ca-BC was characterized through X-ray diffraction (XRD) analysis, followed by isotherm and kinetic adsorption experiments. The decorated Ca on the BC surface was found to have preferred P adsorption ability. A design of calcium hydroxide (Ca(OH)2) to flour in a mass ratio of 2:1 was found to have a maximum adsorption capacity of 314.22â¯mgâ¯g-1 for P. The Langmuir and pseudo-second-order models fit the sorption process adequately. XRD analysis indicated that the preferable adsorption ability to P was due to the reaction of Ca(OH)2 and PO43-, forming the hydroxylapatite (Ca5(PO4)3(OH)) crystal. The P in solution was transformed to the crystal. Thus, Ca-BC is an environmental friendly and low-cost sorbent for P removal.