RESUMO
An online monitoring technology of Pu-239 aerosol based on aerosol direct introduction device, membrane desolvation nebuliser and ICP-MS was established for workplaces of reprocessing plants. Briefly, 0.8 l min-1 Pu-239 aerosol from the workplace was introduced into the aerosol direct introduction device where the air was replaced by Argon, and then the aerosol was introduced into the ICP-MS for measurement. To determine the activity of Pu-239 aerosol, 1.10E-3 Bq ml-1 Pu-242 standard solution generated by a membrane desolvation nebuliser was used. The introduction efficiency of the nebuliser was determined by sampling the aerosol generated from the nebuliser with Lead Standard Solution by glass fiber filter, which was (26.82 ± 3.33) %. The mass bias between Pu-239 and Pu-242 for the ICP-MS measurement was determined by Pu-239 and Pu-242 standard solutions generated by the nebuliser, and mass discrimination correction factor for Pu-239/Pu-242 was 0.972 ± 0.010. The limit of detection (LOD) and limit of quantification (LOQ) of this system were calculated according to the ISO 20 899:2018, which were 2.24E-05 Bq m-3 and 7.45E-05 Bq m-3 with 1 min measurement. The main interference which was from U-238 was determined by U-238 standard solution generated by the nebuliser, and the interferences of U-238 to 239 was (8.50 ± 1.05) E-05. According to the counts of U-238 from several workplaces of reprocessing plant where this system was tested, 239 counts rate from the interferences of U-238 of those workplaces were at the same level of the system background counts, which meant that the LOD above was suitable for those places.
Assuntos
Poluentes Radioativos do Ar/análise , Exposição Ocupacional/análise , Plutônio/análise , Monitoramento de Radiação/instrumentação , Urânio/análise , Aerossóis , Poluição do Ar em Ambientes Fechados/análise , Humanos , Limite de Detecção , Análise EspectralRESUMO
We report a robust method for synthesis of monodisperse PbSeTe single ternary alloy and core/shell heterostructured nanocubes, respectively. The key synthetic strategy to produce such different classes of nanocubes is to precisely control the time of reaction and successive growth. The crystallinity, shape/size distributions, structural characteristics, and compositions of as-prepared nanocubes, both ternary alloy and core/shell, were carefully studied. A plausible growth mechanism for developing each type of lead chalcogenide nanocubes is proposed. These delicately designed PbSeTe nanoscale architectures offer tunable compositions in PbSeTe ternary alloy and nano-interfaces in core/shell nanocubes, which are the critical factors in controlling thermal conductivity for applications in thermoelectrics.