Imperfect guide-RNA (igRNA) enables CRISPR single-base editing with ABE and CBE.

CRISPR base editing techniques tend to edit multiple bases in the targeted region, which is a limitation for precisely reverting disease-associated single-nucleotide polymorphisms (SNPs). We designed an imperfect gRNA (igRNA) editing methodology, which utilized a gRNA with one or more bases that were not complementary to the target locus to direct base editing toward the generation of a single-base edited product. Base editing experiments illustrated that igRNA editing with CBEs greatly increased the single-base editing fraction relative to normal gRNA editing with increased editing efficiencies. Similar results were obtained with an adenine base editor (ABE). At loci such as DNMT3B, NSD1, PSMB2, VIATA hs267 and ANO5, near-perfect single-base editing was achieved. Normally an igRNA with good single-base editing efficiency could be selected from a set of a few igRNAs, with a simple protocol. As a proof-of-concept, igRNAs were used in the research to construct cell lines of disease-associated SNP causing primary hyperoxaluria construction research. This work provides a simple strategy to achieve single-base base editing with both ABEs and CBEs and overcomes a key obstacle that limits the use of base editors in treating SNP-associated diseases or creating disease-associated SNP-harboring cell lines and animal models.

Structure of an Alkaline Pectate Lyase and Rational Engineering with Improved Thermo-Alkaline Stability for Efficient Ramie Degumming.

Alkaline pectate lyases have biotechnological applications in plant fiber processing, such as ramie degumming. Previously, we characterized an alkaline pectate lyase from Bacillus clausii S10, named BacPelA, which showed potential for enzymatic ramie degumming because of its high cleavage activity toward methylated pectins in alkaline conditions. However, BacPelA displayed poor thermo-alkaline stability. Here, we report the 1.78 Å resolution crystal structure of BacPelA in apo form. The enzyme has the characteristic right-handed ß-helix fold of members of the polysaccharide lyase 1 family and shows overall structural similarity to them, but it displays some differences in the details of the secondary structure and Ca2+-binding site. On the basis of the structure, 10 sites located in flexible regions and showing high B-factor and positive ΔTm values were selected for mutation, aiming to improve the thermo-alkaline stability of the enzyme. Following site-directed saturation mutagenesis and screening, mutants A238C, R150G, and R216H showed an increase in the T5015 value at pH 10.0 of 3.0 °C, 6.5 °C, and 7.0 °C, respectively, compared with the wild-type enzyme, interestingly accompanied by a 24.5%, 46.6%, and 61.9% increase in activity. The combined mutant R150G/R216H/A238C showed an 8.5 °C increase in the T5015 value at pH 10.0, and an 86.1% increase in the specific activity at 60 °C, with approximately doubled catalytic efficiency, compared with the wild-type enzyme. Moreover, this mutant retained 86.2% activity after incubation in ramie degumming conditions (4 h, 60 °C, pH 10.0), compared with only 3.4% for wild-type BacPelA. The combined mutant increased the weight loss of ramie fibers in degumming by 30.2% compared with wild-type BacPelA. This work provides a thermo-alkaline stable, highly active pectate lyase with great potential for application in the textile industry, and also illustrates an effective strategy for rational design and improvement of pectate lyases.

Biosynthesis of a rosavin natural product in Escherichia coli by glycosyltransferase rational design and artificial pathway construction.

Phytochemicals are rich resources for pharmaceutical and nutraceutical agents. A key challenge of accessing these precious compounds can present significant bottlenecks for development. The cinnamyl alcohol disaccharides also known as rosavins are the major bioactive ingredients of the notable medicinal plant Rhodiola rosea L. Cinnamyl-(6'-O-ß-xylopyranosyl)-O-ß-glucopyranoside (rosavin E) is a natural rosavin analogue with the arabinopyranose unit being replaced by its diastereomer xylose, which was only isolated in minute quantity from R. rosea. Herein, we described the de novo production of rosavin E in Escherichia coli. The 1,6-glucosyltransferase CaUGT3 was engineered into a xylosyltransferase converting cinnamyl alcohol monoglucoside (rosin) into rosavin E by replacing the residue T145 with valine. The enzyme activity was further elevated 2.9 times by adding the mutation N375Q. The synthesis of rosavin E from glucose was achieved with a titer of 92.9 mg/L by combining the variant CaUGT3T145V/N375Q, the UDP-xylose synthase from Sinorhizobium meliloti 1021 (SmUXS) and enzymes for rosin biosynthesis into a phenylalanine overproducing E. coli strain. The production of rosavin E was further elevated by co-overexpressing UDP-xylose synthase from Arabidopsis thaliana (AtUXS3) and SmUXS, and the titer in a 5 L bioreactor with fed-batch fermentation reached 782.0 mg/L. This work represents an excellent example of producing a natural product with a disaccharide chain by glycosyltransferase engineering and artificial pathway construction.

Efficient production of 3-hydroxypropionate from fatty acids feedstock in Escherichia coli.

The production of chemicals from renewable biomass resources is usually limited by factors including high-cost processes and low efficiency of biosynthetic pathways. Fatty acids (FAs) are an ideal alternative biomass. Their advantages include high-efficiently producing acetyl-CoA and reducing power, coupling chemical production with CO2 fixation, and the fact that they are readily obtained from inexpensive feedstocks. The important platform chemical 3-hydroxypropionate (3HP) can be produced from FAs as the feedstock with a theoretical yield of 2.49 g/g, much higher than the theoretical yield from other feedstocks. In this study, we first systematically analyzed the limiting factors in FA-utilization pathways in Escherichia coli. Then, we optimized FA utilization in Escherichia coli by using a combination of metabolic engineering and optimization of fermentation conditions. The 3HP biosynthesis module was introduced into a FA-utilizing strain, and the flux balance was finely optimized to maximize 3HP production. The resulting strain was able to produce 3HP from FAs with a yield of 1.56 g/g, and was able to produce 3HP to a concentration of 52 g/L from FAs in a 5-L fermentation process. The strain also could produce 3HP from various type of FAs feedstock including gutter oil. This is the first report of a technique for the efficient production of the platform chemical 3HP from FAs.

Production of Cinnamyl Alcohol Glucoside from Glucose in Escherichia coli.

Rosin, a cinnamyl alcohol glucoside, is one of the important ingredients in Rhodiola rosea, which is a valuable medicinal herb used for centuries. Rosin displayed multiple biological activities. The traditional method for producing rosin and derivatives is direct extraction from R. rosea, which suffers from limited availability of natural resources and complicated purification procedure. This work achieved de novo biosynthesis of rosin in Escherichia coli. First, a biosynthetic pathway of aglycon cinnamyl alcohol from phenylalanine was constructed. Subsequently, the UGT genes from Rhodiola sachalinensis (UGT73B6) or Arabidopsis thaliana (UGT73C5) were introduced into the above recombinant E. coli strain to produce rosin. Then the phenylalanine metabolic pathway of E. coli was optimized by genetic manipulation, and the production of rosin by the engineered E. coli reached 258.5 ± 8.8 mg/L. This study lays a significant foundation for microbial production of rosin and its derivatives using glucose as the renewable carbon source.

Cloning, evaluation, and high-level expression of a thermo-alkaline pectate lyase from alkaliphilic Bacillus clausii with potential in ramie degumming.

Alkaline pectate lyases (Pels) have potential application in bioscouring of the textile industry. In this study, a thermo-alkaline Pel (BacPelA) gene from an alkaliphilic Bacillus clausii strain was cloned and overexpressed in Escherichia coli. The mature BacPelA exhibited maximum activity at pH 10.5 and 70 °C and showed high cleavage capability on methylated pectins. BacPelA showed the highest specific activity of 936.2 U mg-1 on ≥85% methylated pectin and 675.5 U mg-1 on standard substrate polygalacturonic acid (PGA) upon evaluation of the absorbance at 235 nm (A235). The K m and k cat values for PGA were 0.54 g l-1 and 346.5 s-1, respectively. Moreover, the 3,5-dinitrosalicylic acid (DNS) assay, which detects the released reducing oligogalacturonic acids, was confirmed to be inaccurate and unsuitable for endo-acting pectinase activity assay because of the difference in the reducibility by DNS reagent between the standard galacturonic acid and the catalytic oligomer products. Significant ramie fiber weight loss was observed following treatment with BacPelA (24.8%) and combined enzyme-chemical method (30.9%), which indicated that the degumming efficiency of BacPelA was the highest of all alkaline and thermostable Pels reported to date. The total activity of the recombinant mature BacPelA reached 8378.2 U ml-1 (A235) by high-cell-density cultivation in fed-batch fermentation with productivity of 239.4 U ml-1 h-1 using E. coli as host, which represents the highest Pel yield reported to date. Therefore, BacPelA, with promising properties for bioscouring, shows potential applications for ramie degumming in the textile industry.

Osmotolerance in Escherichia coli Is Improved by Activation of Copper Efflux Genes or Supplementation with Sulfur-Containing Amino Acids.

Improvement in the osmotolerance of Escherichia coli is essential for the production of high titers of various bioproducts. In this work, a cusS mutation that was identified in the previously constructed high-succinate-producing E. coli strain HX024 was investigated for its effect on osmotolerance. CusS is part of the two-component system CusSR that protects cells from Ag(I) and Cu(I) toxicity. Changing cusS from strain HX024 back to its original sequence led to a 24% decrease in cell mass and succinate titer under osmotic stress (12% glucose). When cultivated with a high initial glucose concentration (12%), introduction of the cusS mutation into parental strain Suc-T110 led to a 21% increase in cell mass and a 40% increase in succinate titer. When the medium was supplemented with 30 g/liter disodium succinate, the cusS mutation led to a 120% increase in cell mass and a 492% increase in succinate titer. Introducing the cusS mutation into the wild-type strain ATCC 8739 led to increases in cell mass of 87% with 20% glucose and 36% using 30 g/liter disodium succinate. The cusS mutation increased the expression of cusCFBA, and gene expression levels were found to be positively related to osmotolerance abilities. Because high osmotic stress has been associated with deleterious accumulation of Cu(I) in the periplasm, activation of CusCFBA may alleviate this effect by transporting Cu(I) out of the cells. This hypothesis was confirmed by supplementing sulfur-containing amino acids that can chelate Cu(I). Adding methionine or cysteine to the medium increased the osmotolerance of E. coli under anaerobic conditions.IMPORTANCE In this work, an activating Cus copper efflux system was found to increase the osmotolerance of E. coli In addition, new osmoprotectants were identified. Supplementation with methionine or cysteine led to an increase in osmotolerance of E. coli under anaerobic conditions. These new strategies for improving osmotolerance will be useful for improving the production of chemicals in industrial bioprocesses.

Improving the thermoactivity and thermostability of pectate lyase from Bacillus pumilus for ramie degumming.

Thermostable alkaline pectate lyases can be potentially used for enzymatically degumming ramie in an environmentally sustainable manner and as an alternative to the currently used chemical-based ramie degumming processes. To assess its potential applications, pectate lyase from Bacillus pumilus (ATCC 7061) was cloned and expressed in Escherichia coli. Evolutionary strategies were applied to generate efficient ramie degumming enzymes. Obtained from site-saturation mutagenesis and random mutagenesis, the best performing mutant enzyme M3 exhibited a 3.4-fold higher specific activity on substrate polygalacturonic acid, compared with the wild-type enzyme. Furthermore, the half-life of inactivation at 50 °C for M3 mutant extended to over 13 h. In contrast, the wild-type enzyme was completely inactivated in less than 10 min under the same conditions. An upward shift in the optimal reaction temperature of M3 mutant, to 75 °C, was observed, which was 10 °C higher than that of the wild-type enzyme. Kinetic parameter data revealed that the catalysis efficiency of M3 mutant was higher than that of the wild-type enzyme. Ramie degumming with M3 mutant was also demonstrated to be more efficient than that with the wild-type enzyme. Collectively, our results suggest that the M3 mutant, with remarkable improvements in thermoactivity and thermostability, has potential applications for ramie degumming in the textile industry.

Production of salidroside in metabolically engineered Escherichia coli.

Salidroside (1) is the most important bioactive component of Rhodiola (also called as "Tibetan Ginseng"), which is a valuable medicinal herb exhibiting several adaptogenic properties. Due to the inefficiency of plant extraction and chemical synthesis, the supply of salidroside (1) is currently limited. Herein, we achieved unprecedented biosynthesis of salidroside (1) from glucose in a microorganism. First, the pyruvate decarboxylase ARO10 and endogenous alcohol dehydrogenases were recruited to convert 4-hydroxyphenylpyruvate (2), an intermediate of L-tyrosine pathway, to tyrosol (3) in Escherichia coli. Subsequently, tyrosol production was improved by overexpressing the pathway genes, and by eliminating competing pathways and feedback inhibition. Finally, by introducing Rhodiola-derived glycosyltransferase UGT73B6 into the above-mentioned recombinant strain, salidroside (1) was produced with a titer of 56.9 mg/L. Interestingly, the Rhodiola-derived glycosyltransferase, UGT73B6, also catalyzed the attachment of glucose to the phenol position of tyrosol (3) to form icariside D2 (4), which was not reported in any previous literatures.

The alkaline pectate lyase PEL168 of Bacillus subtilis heterologously expressed in Pichia pastoris is more stable and efficient for degumming ramie fiber.

BACKGROUND: The conventional degumming process of ramie with alkaline treatment at high temperature causes severe environmental pollution. Pectate lyases can be used to remove pectin from ramie in a degumming process with reduced environmental pollution and energy consumption. Pectate lyase PEL168 from Bacillus subtilis has been previously characterized and the protein structure was resolved. However, Bacillus is not a suitable host for pectate lyases during the degumming process since most Bacillus produce cellulases endogenously with a detrimental effect to the fiber. Pichia pastoris, which does not express endogenous cellulases and has high secretion capability, will be an ideal host for the expression. No previous work was reported concerning the heterologous expression of pectate lyase PEL168 in P. pastoris with an aim for industrial application in ramie bio-degumming. RESULTS: The gene pel168 was expressed in P. pastoris in this study. The recombinant protein PEL168 in P. pastoris (PEL168P) showed two bands of 48.6 kDa and 51.4 kDa on SDS-PAGE whereas the enzyme expressed in E. coli (PEL168E) was the same as predicted with a band of 46 kDa. Deglycosylation digestion suggested that PEL168P was glycosylated. The optimum reaction temperature of the two PEL168s was 50°C, and the optimum pH 9.5. After preincubation at 60°C for 20 min, PEL168E completely lost its activity, whereas PEL168P kept 26% of the residual activity. PEL168P had a specific activity of 1320 U/mg with a Km of 0.09 mg/ml and a Vmax of 18.13 µmol/min. K⁺, Li⁺, Ni²âº and Sr²âº showed little or no inhibitory effect on PEL168P activity, and Ca²âº enhanced enzyme activity by 38%. PEL168P can remove the pectin from ramie effectively in a degumming process. A 1.5 fold increase of PEL168 enzyme expression in P. pastoris was achieved by further codon optimization. CONCLUSIONS: Pectate lyase PEL168 with an available protein structure can be heterologously expressed in P. pastoris. The characterized recombinant PEL168P can be used to remove pectin from ramie efficiently and the expression level of PEL168 in P. pastoris was increased markedly by codon optimization. Therefore, PEL168 is an ideal candidate for further optimization and engineering for bio-degumming.

Cloning, expression, and characterization of a highly active alkaline pectate lyase from alkaliphilic Bacillus sp. N16-5.

An alkaline pectate lyase, Bsp165PelA, was purified to homogeneity from the culture broth of alkaliphilic Bacillus sp. N16-5. The enzyme showed a specific activity as high as 1000 U/mg and had optimum activity at pH 11.5 and 50 degrees . It was composed of a single polypeptide chain with a molecular of 42 kDa deduced from SDS-PAGE, and its isoelectric point was around pH 6.0. It could efficiently depolymerize polygalacturonate and pectin. Characterization of product formation revealed unsaturated digalacturonate and trigalacturonate as the main product. The pectate lyase gene (pelA) contained an open reading frame (ORF) of 1089 bp, encoding a 36-amino acids signal peptide and a mature protein of 326 amino acids with a calculated molecular mass of 35.943 Da. The deduced amino acid sequence from the pelA ORF exhibited significant homology to those of known pectate lyases in polysaccharide lyase family 1. Some conserved active-site amino acids were found in the deduced amino acid sequence of Bsp165PelA. Ca2+ was not required for activity on pectic substrates.

[Characterization of bacterial diversity in the Shengli-S12 oil reservoir by culture-dependent and culture-independent methods].

OBJECTIVE: Examining bacterial diversity in an oil reservoir of Shengli oil field by both culture-independent molecular technique and enrichment method. METHODS: The heterotrophic bacteria, hydrocarbon-degrading bacteria and sulfate-reducing bacteria were enriched from S12-4 oil-well samples by the corresponding media. Then the genomic DNAs of the enrichments were extracted and the 16S rRNA gene clone libraries were constructed. RESULTS: The phylogenetic analysis revealed that the bacterial 16S rRNA gene clone libraries of the 3 enrichments were dominated by clones of Thermotoga, Thermaerobacter and Thermotoga, respectively. Sequences of the other co-dominant clones observed only in the enrichments of hydrocarbon-degrading bacteria and sulfate-reducing bacteria were, respectively, associated with Marinobacter and Moorella. The uncultured 16S rRNA gene library was also generated directly from total DNA of S12-4 oil-well samples by bacterial primer set. Sequence analysis of this bacterial library indicated that a large percentage of clones were highly related to the genus Pseudomonas and the dominant species emerging in the enrichment samples had a very low content in the tested oil reservoir. The significant difference of the bacterial composition between the samples obtained from independent-culture method and enrichment method implies that the specialized nutrient may lead to a distinctive selection of dominant organisms. CONCLUSION: Through culture-dependent and culture-independent methods, we acquired important information on the bacterial diversity of ShengLi oil reservoir. These results may expand our understanding of the microbial diversity of oil reservoir and provide useful information for MEOR(microbial enhancement of oil recovery).

Crystallization and preliminary X-ray study of native and selenomethionyl beta-1,4-mannanase AaManA from Alicyclobacillus acidocaldariusTc-12-31.

AaManA, a beta-1,4-mannanase from the thermoacidophile Alicyclobacillus acidocaldarius Tc-12-31, was expressed in Escherichia coli and purified in a form suitable for X-ray crystallographic analysis. Crystals were obtained using the hanging-drop vapour-diffusion method at 291 K using ammonium dihydrogen phosphate as a precipitant. Data were collected from native mannanase and from a selenomethionyl derivative to 1.90 and 1.99 A, respectively, at 100 K. The native crystal belongs to the orthorhombic space group P2(1)2(1)2(1), with unit-cell parameters a = 44.34, b = 75.55, c = 88.02 A. The derivative crystal belonged to the same space group as native AaManA, with unit-cell parameters a = 44.55, b = 75.70, c = 92.66 A.

[Microbial diversity in shengli petroleum reservoirs analyzed by T-RFLP].

Recent investigations on the microbial ecology of oil reservoirs in a variety of locales indicated that these habitats harbor various assemblages. In this study, a cultured-independent molecular technique, Terminal Restriction Fragment Length Polymorphism (T-RFLP), was used to analyze the microbial diversity of an injection well (S12-ZHU) and three related production wells (S12-4, S12-5 and S12-19) in the ShengLi oilfield (Shandong province, China). The 16S rRNA genes were amplified by PCR with the 5'carboxy-fluorescein (5-FAM)-labelled universal forward primers (27F for bacteria and 21F for archaea) and a universal reverse primer (1495R). Then the 16S rRNA genes were digested with restriction enzymes (Hae III and Hha I) and analyzed by using an automated DNA sequencer. The Shannon-Wiener Diversity index, based on the T-RFLP profiles, indicated that the bacterial and archaeal species richness in the injection well was higher than those of the production ones. The similarity coefficient showed the microbial community similarity among the four samples was 22.4%-30.8% (Bacteria) and 20.8%-34.5% (Archaea), respectively. According to the analysis by TAP T-RFLP program, species belonging to Pseudomonas, Marinobacter and Methanosarcina as well as some uncultured archaeon were supposed to be the dominant bacteria in all four samples. Thus, this study indicates that T-RFLP is useful for analysis of the microbial diversity in petroleum reservoirs.