Comparative analysis of two different types of alumina-alumina hip prosthesis retrieved for aseptic loosening.

We compared and quantified the modes of failure and patterns of wear of 11 Mittelmeier and 11 Ceraver-Ostal retrieved alumina-alumina hip prostheses with reference to the corresponding clinical and radiological histories. Macroscopic wear was assessed using a three-dimensional co-ordinate measuring machine. Talysurf contacting profilometry was used to measure surface roughness on a microscopic scale and SEM to determine mechanisms of wear at the submicron level. The components were classified into one of three categories of wear: low (no visible/measurable wear), stripe (elliptical wear stripe on the heads and larger worn areas on the cups) and severe (macroscopic wear, large volumes of material lost). Overall, the volumetric wear of the alumina-alumina prostheses was substantially less than the widely used metal and ceramic-on-polyethylene combinations. By identifying and eliminating the factors which accelerate wear, it is expected that the lifetime of these devices can be further increased.

The Beet soilborne pomovirus in Belgium and relationship with rhizomania.

The objective of this study was to determine the extend of the Beet soilborne pomovirus (BSBV) and the Beet virus Q in sugar beet fields in Belgium. During the 2000 sugar beet growing season, more than 80 fields located in Belgium were investigated for the presence of the Beet necrotic yellow vein benyvirus (BNYVV), the BSBV and Polymyxa betae, the plasmodiophorid vector of both viruses. Fields investigated were identified either using previous recorded data or by visual identification of yellow leaves on sugar beets or root symptoms. Sampling position (longitude-latitude) was recorded using the global positioning system (G.P.S.) with the view to follow-up infested fields in the following years. Three different techniques were used to evidence the aforementioned biological agents: enzyme-linked immunosorbent assay (ELISA), a RT-PCR assay to detect the viruses and direct coloration of Polymyxa betae in plant root tissues, using lactophenol-aniline blue. ELISA allowed the detection of 43 BSBV-infested soils, largely distributed in all Belgian sugar beet growing areas. These results were largely confirmed by RT-PCR using two different primers pairs targeting respectively a 400 bp fragment of the 145K ORF located on virus RNA-1 and a 970 bp fragment of the conserved 3' end of the viral genome. Five other primer's pairs have also been evaluated for BSBV identification. The detection of BSBV-infested soils without BNYVV, as well as BNYVV-infested soils without BSBV allowed the design of a competition assay between both viruses. Among the samples, 21 were selected randomly and tested for the presence of Beet virus Q by RT-PCR. Here also, six fields were detected positive for this virus. Sequence data reveal a clonal population of BSBV isolates in Belgium though a high level of diversity is observed for the coat protein region. Compared to BSBV, BVQ isolates show less diversity at sequence level.

Wear of alumina-on-alumina total hip arthroplasties at a mean 11-year followup.

The surface topography of 11 alumina-on-alumina hip arthroplasties retrieved for aseptic loosening at a mean 11-year followup was investigated. Macroscopic wear was assessed using a coordinate measuring machine. Microscopic wear features were evaluated by Talysurf analysis. Scanning electron microscopy was used to look at the alumina microstructure. Components were classified into three groups: (1) low wear with no sign of wear and average arithmetic roughness values below 0.05 microm; (2) stripe wear with a visible oblong worn area on the femoral heads and penetration rates below 10 microm/year; and (3) severe wear with a visible loss of material on both components, showing total roughness values as much as 4 microm and maximum penetrations higher than 150 microm. Alumina quality assessed by grain size measurements and porosity percentages improved progressively from 1977 to 1988. This resulted in a correlated decrease of the microscopic wear magnitude. However, on a macroscopic scale, factors responsible for either a load increase (weight, young age, and male gender) or impairment in the load distribution over the component surfaces (large grain size, nonoptimal initial cup inclination, and cup migration and/or tilting) increased the penetration rates.

[Cementless acetabular fixation with solid alumina sockets. Apropos of 62 total hybrid prostheses with press-fit alumina sockets at 6-year mean follow-up]. / Fixation acétabulaire non cimentée de cupules en alumine massive. A propos de 62 prothèses totales hybrides à frottement alumine/alumine au recul moyen de 6 ans.

PURPOSE OF THE STUDY: In order to avoid polyethylene wear observed in total hip replacement, an alumina-alumina combination has been used since 1977. The aim of this prospective study was to assess the results of an alumina-alumina total hip arthroplasty with a cementless press-fit plain alumina socket and a cemented titanium alloy stem with special attention for socket fixation because of previously encountered problems. MATERIALS AND METHODS: Fifty-five patients (62 hips) were operated on between 1982 and 1990. The main parameter for inclusion was a high level activity demand. The bearing surfaces were a 32 mm alumina head articulating within the alumina socket. Mean follow-up was 6 years. RESULTS: Four revisions occurred in this series: 3 for aseptic loosenings of the socket and 1 for femoral head fracture. Considering acetabular revision for aseptic loosening as the end point, the survival rate was 93.2 % at six years and 78.8 % at six years when considering acetabular loosening as the end point. At a mean of 72.1 month-follow-up, 92.4 % of the remaining hips were graded as very good or good while 44.6 % showed radiolucent lines around the socket and 4 had migrated with no radio-clinical correlation. On the femoral side, there was no radiolucent line nor loosening, and the value of the colar calcar resorption was low (mean 0.4 mm). In all four revisions, the stem was left in place, and there was no bone loss, which allowed simple revisions. DISCUSSION: Thin radiolucent lines around bulk alumina press-fit sockets can be understood as a normal bone reaction to material as the Young's modulus is much higher. They do not necessarily signify mechanical failure of the fixation. However when considering the rate of acetabular loosening, an improvement of the alumina/bone interface is still required.

Bioactivity of sol-gel bioactive glass coated alumina implants.

Alumina on alumina total hip arthroplasty has been in use for more than 25 years with encouraging results. However, an improvement of the alumina/bone interface still is required. The objective of this study was to investigate the in vitro and in vivo osteoconductive properties of sol-gel bioactive glass coated alumina implants. Two sol-gel glass compositions (58S Bioglass(R) and 77S Bioglass(R)) were used as coatings on alumina substrates and implanted in a rabbit model. The 58S sol-gel coating was employed in two configurations, single (A58S1) and double layer (A58S2). SEM analysis after one week in simulated body fluid revealed small crystals assumed to represent the initial phase of hydroxyapatite formation, whereas no clear conclusion could be drawn from Fourier transform infrared spectroscopy data. The percentage of bone in direct contact was greater for coated implants when compared to bulk alumina implants (p <0.001). In the case of A58S1 implants, bone percentage significantly increased from 45.1% after 3 weeks up to 87. 8% after 24 weeks of implantation (p = 0.0004). The presence of osteoid tissue, related to an aluminum release from the alumina substrates, was greatly diminished when compared to melt-derived glass-coated alumina implants.

[Osteoconductive properties of bioactive glasses in a bulk form and as a coating on alumina]. / Evaluation du caractère ostéoconducteur de verres bioactifs sous forme massive et en revêtement sur de l'alumine.

INTRODUCTION: Alumina on alumina friction couple has proven its reliability in the field of total hip arthroplasty. However, loosening of the alumina socket has been responsible for most of the failures. An improvement of the bone/alumina interface could be achieved with the use of an osteconductive material as a coating on alumina. The aim of this study was to evaluate the osteconductive properties of two types of bioactive glasses as a coating on alumina substrates. MATERIALS AND METHODS: Two types of coated implants (silicate glass coated alumina - AVSi, and phosphate glass coated alumina - AVP) were evaluated in a rabbit cancellous bone model. Pure alumina implants (A) were used as negative controls and bulk glasses (silicate - VSi and original 45S5, and phosphate glasses -VP) as negative controls. Sacrifices were performed at 3, 12 and 24 weeks. The interface evaluation included histomorphometry using an image analyzer. RESULTS: Silicate glasses demonstrated high osteoconductive properties. However, non mineralized osteoid tissue was the main tissue in contact with both coated implants and bulk phosphate glasses. This tissue covered over 70 p. 100 after 24 weeks of implantation, while it was never observed around pure alumina implants after 3 weeks. DISCUSSION: Amongst the hypotheses that could explain this mineralization inhibitory process, the one involving an Al(3+) glasses contamination from Al(2) O(3) is the likeliest. The high temperature coating procedure could be responsible for alumina transformation into a more soluble phase.

Cementless bulk alumina socket: preliminary results at 6 years.

To avoid polyethylene wear observed in total hip replacement, an alumina-alumina combination has been used since 1977. The aim of this study is to report the results of a hybrid alumina-alumina total hip arthroplasty with a cementless press-fit bulk alumina socket and a cemented titanium alloy stem in 55 patients (62 hips) operated on between 1982 and 1990. The bearing surfaces were a 32-mm alumina head articulating within the alumina socket. Four failures occurred: 3 aseptic loosenings of the socket and 1 femoral head fracture. Considering aseptic loosening as the endpoint, the survival rate was 93.2% after 6 years. At a mean of 72.1 months' follow-up, 92.4% of the surviving hips were graded as very good or good using the Merle d'Aubigné-Postel hip score. Radiolucent lines were observed on the acetabular side in 68.1 of the hips. The future of this interface, which is probably fibrous, remains questionable. With the exception of 1 femoral head fracture, all revisions were related to failure of the bony fixation of the socket, and no problem was encountered related to the alumina-alumina friction coupling. Alumina sockets with other types of cementless fixation have therefore been designed and are presently under clinical investigation.

VIP as a cell-growth and differentiation neuromodulator role in neurodevelopment.

In addition to its commonly recognized status as a neuromodulator of virtually all vital functions, including neurobiological, the neuropeptide VIP plays a role in the control of cell growth and differentiation and of neuronal survival. Through these actions, VIP, whose impact appears early in ontogeny, may possess developmental functions. VIP can be stimulatory or inhibitory on cell growth in function of the model considered. The growth regulatory actions of VIP, which are often independent of cAMP, are most likely significant when mitogenic or trophic factors, eventually released by nontarget cells, are simultaneously present in the extracellular medium. The intracellular mechanisms that mediate these actions of VIP may involve different transduction cascades triggered by subsets of VIP binding sites that may coexist in the same tissue.

Ten-year survivorship of cemented ceramic-ceramic total hip prosthesis.

In the first 187 consecutive alumina-alumina combination hip arthroplasties performed from 1977 to 1979, both components were cemented with conventional techniques. At ten-year follow-up evaluation, 87 patients were reviewed or interviewed by telephone, 37 were dead, 39 were lost to follow-up evaluation, and 24 failures were reoperated on before the end of ten years. The major cause of failure was aseptic loosening of the acetabular component (15 failures). Fracture of the socket and of the femoral head occurred in five patients in this series. However, these complications were not seen with components manufactured after 1979. At the end of ten years, survivorship analysis depicted a 82.59% survival rate when reoperation was considered as failure and a 88.57% rate when reoperation for aseptic loosening was considered as failure. The femoral component had a 99.16% survival rate and the acetabular component had an 88.57% survival rate when reoperation for aseptic loosening was considered as failure. Age, appearance of a two- or three-zone demarcation at the intermediate follow-up evaluation, and outer diameter of the acetabular component were the major parameters influencing the results. Better results observed in the population younger than 50 years of age may be related to the small amount of wear debris produced by the alumina-alumina combination. This combination in hip prosthesis is secure, but should be implanted in young and active patients; the outer diameter of the acetabular component must be at least 50 mm. The major problem that remains is the socket's fixation. It could be improved by a design modification, by choosing another mode of fixation, or both.

Prostaglandin E2 level in tissue surrounding aseptic failed total hips. Effects of materials.

Production of inflammatory mediators (IM) by cells and specifically macrophages around loosened implants may be responsible for their loosening. Our hypothesis was that different materials give rise to different amounts of these IM. It is thought that alumina/alumina for total hip replacement (THR), which has been used for 15 years in our orthopedic department, may produce less IM than other systems. We initiated a clinical prospective study to measure the level of prostaglandin E2 (PGE2) in tissue surrounding loosened prostheses to quantify PGE2 production regarding the types of material involved in the friction couple, i.e., alumina/alumina versus metal/polyethylene, and the type of fixation, i.e., cemented versus cementless. A total of 29 THR revisions were performed in 28 patients. Four implant groups were identified: alumina/alumina cemented, alumina/alumina cementless, metal/polyethylene cemented, and metal/polyethylene cementless. For each revision, tissues surrounding the failed implants were harvested and processed, and the PGE2 was measured in a blind manner using an immunoassay technique. As the measuring technique was difficult, at least three determinations for each sample were necessary. Some samples were excluded from the analysis for various reasons, for example, second or further revisions involving many different materials in the past, conjunction of metallic and alumina debris and samples taken from non-loosened components. Finally, 15 samples were considered adequate for inclusion in this study. Two groups were analyzed and compared: the alumina/alumina couple and the metal/polyethylene couple. Tissue surrounding the first group demonstrated a PGE2 level of 69 +/- 56 fmol/mg wet weight compared to 202 +/- 156 fmol/mg for the second.(ABSTRACT TRUNCATED AT 250 WORDS)

Alumina-on-alumina hip replacement. Results and survivorship in young patients.

Total hip replacement using an alumina head and socket and a titanium alloy stem is evaluated in a series of patients under 50 years of age. Between April 1977 and December 1986, 86 such replacements were performed in 75 patients, but mainly because patients had difficulty travelling from Africa, only 71 hips were followed up adequately; of these, 56 were primary procedures and 15 revisions. Survivorship analysis showed that 98% of the prostheses were retained for 10 years. On clinical and radiological examination 51 of the 71 hips were stable and acceptable, 15 had radiological changes on the acetabular side, and one on the femoral side; four other cases had clinical and radiological changes suggesting impending failure, possibly because fixation of the socket was inadequate. There were no differences between the results of the primary procedures and those of revisions. In these young patients, the results seem better with alumina-on-alumina hips than with other varieties, possibly because of their remarkably low wear.

Wear analysis of retrieved alumina heads and sockets of hip prostheses.

The wear behavior of hip prostheses alumina components was studied on 20 retrieved implants removed for socket loosening. The observed wear takes two forms: a running-in of the mating surfaces and a gross disruption of the surfaces. The running-in is very shallow, in the order of 0.2 micron after 8 years of implantation. This is observed on the load-bearing areas of the components. Gross wear is not material-related but had always been associated to a high contact pressure between the edge of the socket and the femoral head. Such a high contact pressure occurs after the socket had loosened and then tilted or if it was initially positioned too vertically. The long-term success of alumina-alumina THP components depends essentially upon biomechanical considerations and upon the quality of the material. The area of contact between the head and the socket should be large enough to minimize the contact stresses. This can only be achieved by a good positioning of the socket and by a close tolerance fit of the alumina components; any deviation from sphericity should also be avoided. The normal wear behavior of alumina is a running-in process leading to an average wear rate of 0.025 micron/year as compared to 100 microns/year for UHMWPE on metallic heads.

Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia.

Yttrium-oxide-partially-stabilized zirconia (YPSZ) belongs to a new class of ceramics exhibiting an improved toughness when compared to alumina. The toughening mechanism is related to a martensitic-like transformation of tetragonal metastable grains into a monoclinic state occurring at the crack tip. Specific tests showed that YPSZ exhibited a high bending strength (900-1200 MPa), a low Young's modulus (200 GPa), and a high toughness (KIC = 9-10 MN/m3/2). Its average grain size of 0.5 microns allows a surface roughness as low as 0.008 microns. Sterilization or aging in saline solution at room temperature for 100 days did not affect the toughness of this material. Cylindrical YPSZ samples, manufactured by cold isostatic pressing and sintering, were implanted in the paraspinal muscles in the rat up to 12 weeks. The tissue reaction was evaluated with reference to alumina (ISO requirements) by means of quantitative histomorphometry. No significant differences were found between YPSZ and alumina for both the membrane thickness and cell distributions surrounding the implants.

The use of dense alumina-alumina ceramic combination in total hip replacement.

The purpose of this article was to review the laboratory and clinical performances since 1970 of a total hip prosthesis using alumina-alumina combination. The chemical and physical properties of dense alumina ceramic were studied in relation to biocompatibility, mechanical strength, and surface properties. Through the examination of 35 retrieved implants, it was found that the long-term success of alumina-alumina total hip replacement depends on both the ceramic microstructure (small grain size with uniform distribution, minimum porosity, absence of inclusions) and implant geometry (sphericity deviation +/- 1 micron, radius tolerance between components 7-10 microns). Alumina component wear and fractures have disappeared with the use of high-performance materials and severe manufacturing quality control. Examination of human biopsies from well-fixed prostheses showed that alumina particles deposits increase with time with only a low-grade macrophagic reaction. When loosening occurred, an inflammatory reaction appeared; this reaction was less striking than with loose metal-polyethylene prostheses, however. The long-term behavior of cementless alumina cup fixation depends upon initial positioning and stability; survivorship analysis of the cemented ceramic cups showed an 88% survival probability after 8 years with a 1.6% average annual probability of revision. The percentage of surviving was 100% after 8 years in patients who were less than 50 years old. Aseptic loosenings occurring at the cup-cement interface were assumed to be related to stress protection secondary to the high rigidity of the ceramic leading to a weakening of the spongious bone supporting the cement mantle. Good bone stock quality as well as high-quality ceramic appear to be the prerequisites for durable fixation of alumina sockets.