Optimized photodegradation of palm oil agroindustry waste effluent using multivalent manganese-modified black titanium dioxide.

This article presents a methodological approach to use manganese (Mn3+Mn7+)-modified black titanium dioxide (Mn/BTiO2) as a photocatalyst to optimize and improve visible-light-driven photodegradation of treated agro-industrial effluent (TPOME). A modified wet chemical process was used to prepare BTiO2. The BTiO2 was then wet impregnated with Mn and calcined at 300 °C for 1 h to produce Mn/BTiO2. The activity of Mn/BTiO2 was investigated in terms of photo-assisted elimination of chemical oxygen demand (COD), phenolic compounds (PCs), color, and total organic carbon (TOC). Using the design of experiments (DOE), the conditions of the photocatalytic process, including photocatalyst loading, Mn concentration, hydrogen peroxide (H2O2) dose, and irradiation time, were optimized. Under the optimum conditions (0.85 g/L photocatalyst loading, 0.048 mol/L H2O2 dose, 0.301 wt.% Mn concentration, and 204 min irradiation time) COD, PCs, color, and TOC removal efficiencies of 88.87%, 86.04%, 62.8%, and 84.66%, respectively, were obtained. Statistical analysis showed that the response variable's removal from TPOME estimation had high R2 and low RMSE, MSE, MAD, MAE, and MAPE values, indicating high reliability. This study demonstrated the significant potential of the developed photocatalytic system for the treatment of waste effluent generated by the palm oil industry and other agro-industries, with the ability to simultaneously reduce a number of organic pollution indicators (OPIs).

Effect of green and chemically synthesized titanium dioxide nanoparticles on cadmium accumulation in wheat grains and potential dietary health risk: A field investigation.

A field study was designed to explore the impacts of foliar-applied chemically and green synthesized titanium dioxide nanoparticles (TiO2 NPs) on cadmium (Cd) uptake in wheat plants. The wheat was grown in field which was contaminated with Cd and plants were subjected to foliar episodes of TiO2 NPs during plant growth period. Leaf extracts of two plant species (Trianthema portulacastrum, Chenopodium quinoa) were used for green synthesis while sol-gel method was used for chemical preparation of TiO2 NPs. Results showed that TiO2 NPs significantly enhanced the plant height, length of spikes photosynthesis, and straw and grain yield compared to control. TiO2 NPs minimized the oxidative burst in leaves and improved the enzyme activities than control. Cadmium concentrations of straw, roots and grains decreased after TiO2 NPs treatments than control. The grain Cd contents were below recommended threshold (0.2 mg Cd /kg grain DW) for cereals upon NPs exposure. The health risk index by the dietary use of grains for adults was below threshold upon NPs exposure. Overall, foliar use of TiO2 NPs prepared from plant extracts was appropriate in minimizing Cd contents in wheat grains, thereby reducing risk of Cd to human health via food chain.

Synthesis, characterization and advanced sustainable applications of titanium dioxide nanoparticles: A review.

Nanotechnology is capturing great interest worldwide due to their stirring applications in various fields. Among nanoparticles (NPs), titanium dioxide (TiO2) NPs have been widely used in daily life and can be synthesized through various physical, chemical, and green methods. Green synthesis is a non-toxic, cost-effective, and eco-friendly route for the synthesis of NPs. Plenty of work has been reported on the green, chemical, physical and biological synthesis of TiO2 NPs and these NPs can be characterized through high tech. instruments. In the present review, dense data have been presented on the comparative synthesis of TiO2 NPs with different characteristics and their wide range of applications. Among the TiO2 NPs synthesis techniques, the green methods have been proven to be efficient than chemical synthesis methods because of the less use of precursors, time-effectiveness, and energy-efficiency during the green synthesis procedures. Moreover, this review describes the types of plants (shrubs, herbs and trees), microorganisms (bacteria, fungi and algae), biological derivatives (proteins, peptides, and starches) employed for the synthesis of TiO2 NPs. The TiO2 NPs can be effectively used for the treatment of polluted water and positively affected the plant physiology especially under abiotic stresses but the response varied with types, size, shapes, doses, duration of exposure, metal species along with other factors. This review also highlights the regulating features and future standpoints for the measurable enrichment in TiO2 NPs product and perspectives of TiO2 NPs reliable application.

Synthesis and characterization of titanium dioxide nanoparticles by chemical and green methods and their antifungal activities against wheat rust.

The production of metallic nanoparticles (NPs) by green and ecofriendly methods has received consideration during the recent past. The present study summarized the comparative production of titanium dioxide (TiO2) NPs by plant extracts of Trianthema portulacastrum (T2) and Chenopodium quinoa (T3) and by conventional chemical (sol-gel) method (T1). Synthesized TiO2-NPs were examined by high-tech. techniques such as X-Ray Diffraction (XRD), Fourier Transmission Infra-red (FT-IR) spectroscopy, Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray (EDX) spectroscope, SEM-EDS spot analysis and elemental mapping. Synthesized TiO2-NPs were applied on wheat rust (Ustilago tritici) for the evaluation of their antifungal activity against toxic plant pathogens. XRD results confirmed the (2θ) peak at 25.3 related to 101 anatase form. EDS-spot analysis and elemental mapping confirms the formation of TiO2-NPs by using these techniques. SEM secondary electrons (SEs) images demonstrated the nano range of particles in cluster form with fewer porous structures. The average size of all three TiO2-NPs was found less than 15 nm. FT-IR analysis of all three TiO2-NPs perfectly matched with the standard parameters. The NPs prepared by both sol-gel and green methods have a good antifungal response against U. tritici, and the green prepared TiO2-NPs were found to have the best antifungal activity against wheat rust especially NPs synthesized with the extract of C. quinoa. Overall, green method can be used for the large scale and less toxic synthesis of TiO2-NPs because of their wide range of environmental applications.