Effects of lignocellulosic biomass type on the economics of hydrothermal treatment of digested sludge for solid fuel and soil amendment applications.

Digested sludge is a waste stream from anaerobic digestion (AD) in wastewater treatment plants. Hydrothermal treatment (HTT) of sludge mixed with lignocellulosic biomass is an attractive approach to improve sludge dewaterability and generate value-added products. However, process economics has not been well understood. In this study, firstly, the effect of biomass type on the energy properties of hydrochars was studied. Secondly, two scenarios were simulated to evaluate the effects of biomass type on the economics (processing 50,000 tonnes of sludge per year) of HTT of digested sludge for solid fuel and soil amendment applications. The two HTT scenarios included sludge alone and sludge-biomass mixtures (four cases for four biomass feedstocks) at 180 °C for 60 min. In both scenarios, HTT liquids were returned to existing AD facilities for biomethane production to offset the energy cost of the HTT process. The results showed that the higher heating value significantly increased from 16.0-17.0 MJ kg-1 in the sludge alone case to 18.0-23.0 MJ kg-1 in sludge-biomass mixtures (except for rice husk). With the use of saved transport cost as a revenue source, HTT of sludge-biomass led to a net present value (NPV) range of AU$ 9.9-20.3 million (20 years) and an internal rate of return (IRR) range of 25.0 %-45.2 % for solid fuel application of resulting hydrochar compared to an NPV of AU$ 18.4 million and an IRR of 55.0 % from HTT of sludge alone scenario. HTT of sludge-biomass led to a NPV range of AU$ 4.5-14.5 million and an IRR range of 17.2 %-35.7 % for soil amendment application while the hydrochar from HTT of sludge alone was not recommended for soil application due to the high contents of heavy metals. This study provides useful and critical information for process scale-up and commercialization for integration into wastewater treatment plants.

Effects of hydrochar derived from hydrothermal treatment of sludge and lignocellulose mixtures on soil properties, nitrogen transformation, and greenhouse gases emissions.

In this study, hydrochar samples derived from hydrothermal treatment (HTT) of sludge and sludge-biomass mixtures were applied to a sandy soil and their effects on soil properties, soil nutrients, greenhouse gas (GHG) emissions, and soluble heavy metals were investigated. The application of untreated sludge and hydrochar derived from HTT of sludge at 180 °C led to the highest soluble nitrate, CO2 and N2O emissions, followed by the application of hydrochar samples derived from HTT of sludge-biomass mixtures at 180 °C. Although the application of hydrochar samples derived from HTT of sludge alone and sludge-biomass mixtures at 240 °C in sandy soil led to the lowest emissions of CO2 and N2O, it resulted in lower levels of soil electrical conductivity (EC), cation exchange capacity (CEC) and soluble phosphorus. The application of hydrochar samples derived from HTT at 240 °C led to the production of CH4 and lower nitrate-N contents than hydrochar samples derived from HTT at 180 °C. These results indicated that the soils containing hydrochar samples from HTT at 240 °C were anaerobic, which might inhibit the growth of plants. The application of hydrochar samples derived from HTT of sludge-biomass at 180 °C led to significantly improved contents of soil soluble phosphorus (2.56 and 2.84 g kg-1 soil) and soil nitrate-N (160.2 and 263.2 mg kg-1 soil) at the end of 60 days of incubation. However, these contents were lower than the contents of soluble phosphorus (3.71 and 4.45 g kg-1 soil) and nitrate-N (528.3 and 583.2 mg kg-1 soil) with the application of untreated sludge and sludge derived from HTT of sludge alone at 180 °C. Although more studies are needed to understand the mechanisms and effects on different soils, this study provides useful insights into the application of hydrochar derived from sludge-biomass mixture in soil.

Effects of lignocellulosic biomass type on nutrient recovery and heavy metal removal from digested sludge by hydrothermal treatment.

Sludge is a nutrient-rich organic waste generated from wastewater treatment plants. However, the application of sludge as a nutrient source is limited by its high contents of water and pollutants. In this study, the effects of biomass type on nutrient recovery and heavy metal removal from digested sludge by hydrothermal treatment (HTT) were investigated. Blending biomass with digested sludge for HTT at 180-240 °C increased the recovery of nitrogen in the treated solids. At the HTT temperature of 240 °C, HTT with hardwood sawdust led to the highest nitrogen recovery of 70.6%, compared to the lowest nitrogen recovery of 36.5% without biomass. Blending biomass slightly decreased the recovery of phosphorus compared to those without biomass. Nevertheless, the lowest phosphorus recovery of 91.3% with the use of hardwood sawdust at the HTT temperature of 240 °C was only ∼7.0% less than that without biomass. Blending biomass reduced the contents of macro-metals such as Ca, Fe, Mg and Al in treated solids but the metal contents varied with different biomasses. Regarding the heavy metals, the use of rice husk did not decrease the contents of Ni and Co while blending bagasse did not decrease the content of Cr at HTT temperatures of 210 °C and 240 °C compared to the use of other biomasses. The different effects of biomass type on nutrient recovery and heavy metals were likely related to the types and abundances of organic acids such as acetic acid, oxygen-containing functional groups such as C-OH and COOH, oxide minerals such as silica from biomasses and the overall effects of these factors. This study provides very useful information in selection of lignocellulosic biomass for HTT of sludge for nutrient recovery and heavy metal removal.