Photobiomodulation reduces hippocampal apoptotic cell death and produces a Raman spectroscopic "signature".

Apoptotic cell death within the brain represents a significant contributing factor to impaired post-traumatic tissue function and poor clinical outcome after traumatic brain injury. After irradiation with light in the wavelength range of 600-1200 nm (photobiomodulation), previous investigations have reported a reduction in apoptosis in various tissues. This study investigates the effect of 660 nm photobiomodulation on organotypic slice cultured hippocampal tissue of rats, examining the effect on apoptotic cell loss. Tissue optical Raman spectroscopic changes were evaluated. A significantly higher proportion of apoptotic cells 62.8±12.2% vs 48.6±13.7% (P<0.0001) per region were observed in the control group compared with the photobiomodulation group. After photobiomodulation, Raman spectroscopic observations demonstrated 1440/1660 cm-1 spectral shift. Photobiomodulation has the potential for therapeutic utility, reducing cell loss to apoptosis in injured neurological tissue, as demonstrated in this in vitro model. A clear Raman spectroscopic signal was observed after apparent optimal irradiation, potentially integrable into therapeutic light delivery apparatus for real-time dose metering.

Potential for direct application of blue light for photo-disinfection of dentine.

The direct application of light for photo-disinfection potentially provides a safe and novel modality to inhibit or eliminate cariogenic bacteria residing upon and within dentine. This study aimed to both; characterize the pattern of transmission of 405 nm light through molar dentine at different tooth locations, as well as, determine the irradiation parameters that are antibacterial for Streptococcus mutans under various growth conditions, including lawns, planktonic cultures, and biofilms. To determine the amount of light (405 nm) transmitted at different anatomical tooth locations; irradiance values were recorded after blue light (470-4054 mW/cm2) had traversed through occlusal, oblique, and buccal dentine sections; and three thicknesses - 1, 2 and 3 mm were investigated. To determine tubular density; scanning electron micrographs from 2 mm outer (dentine-enamel junction) and inner (pulp) dentine sections were analysed. For photo-disinfection studies; S. mutans was irradiated using the same 405 nm wavelength light at a range of doses (110-1254 J/cm2) in both biofilm and planktonic cultures. The inhibitory effect of the irradiation on bacterial lawns was compared by measuring zones of inhibition; and for planktonic cultures both spectrophotometric and colony forming unit (CFU) assays were performed. A live/dead staining assay was utilised to determine the effect of irradiation on bacterial viability in mature biofilms. Data indicated that increasing dentine thickness decreased light transmission significantly irrespective of its orientation. Occlusal and oblique samples exhibited higher transmission compared with buccal dentine. Oblique dentine 405 nm light transmission was comparable with that of occlusal dentine independent of section thickness. An increased tubule density directly positively correlated with light transmission. Irradiation at 405 nm inhibited S. mutans growth in both biofilm and planktonic cultures and a dose response relationship was observed. Irradiation at doses of 340 and 831 J/cm2 led to significant reductions in bacterial growth and viability; as determined by CFU counting and live/dead staining. Data suggests that phototherapy approaches utilising a 405 nm wavelength have therapeutic potential to limit cariogenic bacterial infections both at the surface and within dentine.

Development and application of LED arrays for use in phototherapy research.

Lasers/LEDs demonstrate therapeutic effects for a range of biomedical applications. However, a consensus on effective light irradiation parameters and efficient and reliable measurement techniques remain limited. The objective here is to develop, characterise and demonstrate the application of LED arrays in order to progress and improve the effectiveness and accuracy of in vitro photobiomodulation studies. 96-well plate format LED arrays (400-850 nm) were developed and characterised to accurately assess irradiance delivery to cell cultures. Human dental pulp cells (DPCs) were irradiated (3.5-142 mW/cm2 : 15-120 s) and the biological responses were assessed using MTT assays. Array calibration was confirmed using a range of optical and analytical techniques. Multivariate analysis of variance revealed biological responses were dependent on wavelength, exposure time and the post-exposure assay time (P < 0.05). Increased MTT asbsorbance was measured 24 h post-irradiation for 30 s exposures of 3.5 mW/cm2 at 470, 527, 631, 655, 680, 777, 798 and 826 nm with distinct peaks at 631 nm and 798 nm (P < 0.05). Similar wavelengths were also effective at higher irradiances (48-142 mW/cm2 ). LED arrays and high throughput assays provide a robust and reliable platform to rapidly identify irradiation parameters which is both time- and cost-effective. These arrrays are applicable in photobiomodulation, photodynamic therapy and other photobiomedical research.

The dark art of light measurement: accurate radiometry for low-level light therapy.

Lasers and light-emitting diodes are used for a range of biomedical applications with many studies reporting their beneficial effects. However, three main concerns exist regarding much of the low-level light therapy (LLLT) or photobiomodulation literature; (1) incomplete, inaccurate and unverified irradiation parameters, (2) miscalculation of 'dose,' and (3) the misuse of appropriate light property terminology. The aim of this systematic review was to assess where, and to what extent, these inadequacies exist and to provide an overview of 'best practice' in light measurement methods and importance of correct light measurement. A review of recent relevant literature was performed in PubMed using the terms LLLT and photobiomodulation (March 2014-March 2015) to investigate the contemporary information available in LLLT and photobiomodulation literature in terms of reporting light properties and irradiation parameters. A total of 74 articles formed the basis of this systematic review. Although most articles reported beneficial effects following LLLT, the majority contained no information in terms of how light was measured (73%) and relied on manufacturer-stated values. For all papers reviewed, missing information for specific light parameters included wavelength (3%), light source type (8%), power (41%), pulse frequency (52%), beam area (40%), irradiance (43%), exposure time (16%), radiant energy (74%) and fluence (16%). Frequent use of incorrect terminology was also observed within the reviewed literature. A poor understanding of photophysics is evident as a significant number of papers neglected to report or misreported important radiometric data. These errors affect repeatability and reliability of studies shared between scientists, manufacturers and clinicians and could degrade efficacy of patient treatments. Researchers need a physicist or appropriately skilled engineer on the team, and manuscript reviewers should reject papers that do not report beam measurement methods and all ten key parameters: wavelength, power, irradiation time, beam area (at the skin or culture surface; this is not necessarily the same size as the aperture), radiant energy, radiant exposure, pulse parameters, number of treatments, interval between treatments and anatomical location. Inclusion of these parameters will improve the information available to compare and contrast study outcomes and improve repeatability, reliability of studies.

Developments in low level light therapy (LLLT) for dentistry.

OBJECTIVES: Low level light/laser therapy (LLLT) is the direct application of light to stimulate cell responses (photobiomodulation) in order to promote tissue healing, reduce inflammation and induce analgesia. There have been significant studies demonstrating its application and efficacy at many sites within the body and for treatment of a range of musculoskeletal injuries, degenerative diseases and dysfunction, however, its use on oral tissues has, to date, been limited. The purpose of this review is to consider the potential for LLLT in dental and oral applications by providing background information on its mechanism of action and delivery parameters and by drawing parallels with its treatment use in analogous cells and tissues from other sites of the body. METHODS: A literature search on Medline was performed on laser and light treatments in a range of dental/orofacial applications from 2010 to March 2013. The search results were filtered for LLLT relevance. The clinical papers were then arranged to eight broad dental/orofacial categories and reviewed. RESULTS: The initial search returned 2778 results, when filtered this was reduced to 153. 41 were review papers or editorials, 65 clinical and 47 laboratory studies. Of all the publications, 130 reported a positive effect in terms of pain relief, fast healing or other improvement in symptoms or appearance and 23 reported inconclusive or negative outcomes. Direct application of light as a therapeutic intervention within the oral cavity (rather than photodynamic therapies, which utilize photosensitizing solutions) has thus far received minimal attention. Data from the limited studies that have been performed which relate to the oral cavity indicate that LLLT may be a reliable, safe and novel approach to treating a range of oral and dental disorders and in particular for those which there is an unmet clinical need. SIGNIFICANCE: The potential benefits of LLLT that have been demonstrated in many healthcare fields and include improved healing, reduced inflammation and pain control, which suggest considerable potential for its use in oral tissues.

Improved bonding of zirconia substructures to resin using a "glaze-on" technique.

OBJECTIVE: To investigate the influence of applying thin intermediary coatings of acid-etchable glasses on the shear bond strength between a methacrylate resin based cement and an yttria-stabilized zirconia dental ceramic substrate. METHODS: The upper and lower surfaces of 110 sintered yttria-stabilised tetragonal zirconia polycrystalline disc-shaped specimens were polished using sequential grades of Silicon Carbide, then air-abraded with 25 µm diameter alumina particles. Specimens were randomly allocated to 11 groups (A-K) (n=10), group A acting as control. The upper surface of Group A specimens was subjected to a tribochemical coating regime (CoJet, 3M ESPE). Five glazing ceramics were applied and fired according to the manufacturer's recommended firing regime. The glaze was etched with 10% HF acid and all specimens coated with a silane primer. Two differing storage regimes were employed (wet storage vs thermocycling). Shear bond strength testing specimens were created by cementing resin-based composite cylinders to the centre of the prepared ceramic surface using Rely-X Unicem (3M ESPE) resin based cement. Shear bond strength testing was performed and load at failure recorded. RESULTS: A factorial analysis of variance at a 95% significance level demonstrated that all glazing techniques resulted in a significant increase in the shear bond strength compared with using the resin based cement alone (P<0.01), with the different glazing ceramics resulting in significant differences in mean shear bond strength (P=0.008). The differences were a function of the storage state (wet storage vs thermocycling (P=0.013)). CONCLUSION: The glazing techniques used in the current investigation resulted in a significantly enhanced shear bond stress to the resin based cement when compared with the current 'gold standard' - tribochemical coating.

The effect of surface roughness on the flexure strength of an alumina reinforced all-ceramic crown material.

OBJECTIVES: The aim of the current study was to assess the contribution of surface defects to early failures. Specific surface flaw distributions were introduced to a series of nominally identical standard disc shaped specimens to assess the contribution of surface flaws to early failures rather than depending on average fracture strengths that cannot be used reliably as a design parameter for brittle all-ceramic crown materials. METHODS: Sets of 30 Vitadur-Alpha core porcelain discs (15mm diameter, 1.7mm thickness) were ground on silicon carbide abrasive paper to induce specific surface flaw distributions to a series of nominally identical standard disc shaped specimens. Mean flexure strengths, standard deviations and associated Weibull moduli (m) were determined using bi-axial flexure (ball-on-ring). RESULTS: A significant increase in mean bi-axial flexure strength and associated Weibull modulus was identified for the "fine" compared with the "coarser" ground nominally identical disc shaped specimens. A reduction in the degree of coarseness of the fit surface of specimens led to an increase in the mean bi-axial flexure strength compared with a control group of samples and therefore an associated increase in the survival probability at low strength levels. CONCLUSIONS: The use of a relevant testing method (bi-axial flexure) combined with the Weibull analysis as a method of predicting survival rates from the strength data could aid in identifying the failure mechanisms involved in crown fracture. This would result in an improved validation of the strength data rather than depending on the average fracture strength that cannot be used reliably as a design parameter for brittle all-ceramic crown materials.