Valorization of walnut green husk (Juglans regia L.) through sequential electrohydrodynamic extraction of pectin and phenolics: Process optimization and multidimensional analysis.

This study aimed to optimize the extraction of pectin and phenolics from walnut green husk using the electrohydrodynamic method (EHD) and assess its impact on the chemical structure and properties of pectin. A comparative analysis was conducted with acidified water as the conventional extraction method. The results revealed significant improvements under the optimal EHD conditions (36.8 min, 17.5 kV, 90 °C), leading to a remarkable increase of over 64 % in pectin yield and >20 % in total phenolic content in half the extraction time. Chemical analysis showed that pectin samples contain 1.4-1.7 % ash, 3.6-4.6 % protein, over 90 % carbohydrates, and a galacturonic acid content ranging from 67.7 to 68.2 g/g. Both extraction methods yielded pectin with a high methoxyl degree, comparable thermal stability, and amorphous structure. EHD treatment resulted in reduced molecular weight, degree of esterification, water-holding capacity, and emulsion stability of pectin while enhancing its solubility and emulsion capacity. In summary, EHD treatment significantly improved extraction yield and changed the functionality of pectin, particularly in terms of emulsion activity. This alteration should be considered when utilizing pectin for specific applications.

Effect of sugar beet fiber and different hydrocolloids on rheological properties and quality of gluten-free muffins.

BACKGROUND: Extraction of pectin from sugar beet pulp is a side production line to recover value-added by-products in a sugar refining company. We aimed to evaluate the influence of depectinized and non-treated fiber on the quality of food. Pectin was removed from sugar beet pulp, and sugar beet fiber with and without pectin extraction (F and FP respectively) were replaced with rice flour in gluten-free muffins. To achieve a consistent texture, different hydrocolloids (carrageenan, xanthan gum, guar gum, locust bean gum (LBG), and tara gum) were added to the batter formula. RESULTS: The maximum batter viscosity was observed for the xanthan-containing formulation, followed by guar, tara, LBG, and carrageenan formulations. The highest hardness was recorded for baked muffins formulated with guar, followed by xanthan, carrageenan, tara, and LBG formula. Moisture retention was considerably increased in the presence of FP and LBG compared with muffins prepared by F and/or other hydrocolloids. However, muffins containing F showed the least hardness and highest cohesiveness, gumminess, springiness, and chewiness. The samples containing F represented lighter color, lower energy, and less porous in appearance compared with the FP formula. From a sensorial aspect, there was no significant difference between the F and FP formulas, but the control and sample with higher fiber content were not acceptable. CONCLUSION: This study showed that depectinized sugar beet fiber a by-product of sugar factories, has the possible use in formulation of gluten-free muffins with no adverse effects on its quality. © 2022 Society of Chemical Industry.

Rheological and functional properties of asafoetida gum.

The asafoetida gum was extracted and purified from oleo-gum-resin of Ferula assa foetida root and characterized by high pressure anions exchange chromatography after acidic hydrolysis. It was composed of Gal:Ara:Rha:GlcA with the ratio 11.5:5.0:2.1:1.0. This monosaccharide composition was found similar to that of a commercial Arabic gum which exhibited a Gal:Ara:Rha:GlcA ratio of 11.7:5.4:3.2:1.0. As the Arabic gum is currently used for its emulsifying properties, the two gums were evaluated for their functional and rheological behaviors. Surface and interfacial tensions values were lower for asafoetida gum compared to Arabic gum. Critical micelle concentration was achieved at concentrations of 0.5% w/w and 1% w/w for asafoetida and Arabic gums, respectively. Values of emulsion capacity, emulsion stability and foaming properties were considerably higher for asafoetida gum in contrast to emulsion activity index that was lower than that of Arabic gum. As those of Arabic gum, solutions of asafoetida gum (2-30% w/w) exhibited Newtonian flow behavior at shear rates between 1 and 500 s-1. Apparent viscosities of Arabic and asafoetida gums were close and logically decreased by increasing temperature (10-80 °C). Higher viscosities were achieved at higher pH and CaCl2 concentrations.

Structural characterization and thermal behavior of a gum extracted from Ferula assa foetida L.

The gum asafoetida, an oleo-gum-resin from root of Ferula assa foetida, was extracted through alcoholic procedure followed by water extraction and then biochemically characterized using colorimetric assays, Fourier infrared spectroscopy, gas chromatography coupled to mass spectrometry, and 1D and 2D nuclear magnetic resonance. The gum was mainly composed of carbohydrates (67.39% w/w) with a monosaccharide distribution of 11.5: 5.9: 2.3: 1 between Gal, Ara, Rha and GlcA (molar ratio) and proteins (arabinogalactan protein). The polysaccharide consisted of a (1→3)-ß-d-galactan backbone ramified predominantly from O-6 but also from O-4 and O-4,6. Side chains included terminal-α-l-Araf, terminal-α-l-Rhap, (1→3)-α-l-Araf, (1→5)-α-l-Araf, terminal-ß-d-Galp, ß-d-GlcA and traces of (1→4)-ß-d-GlcA. X-ray diffraction pattern showed a semi crystalline microstructure. Thermal behavior of the gum was evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) revealed temperatures below and upper 200°C as dominant regions of weight loss.