RESUMO
Oil spillage is one of the most common pollutants which brings greater economic loss and damage to the environment. The intensity and amount of the damage may vary depending on factors such as the type of oil, the location of the spill, and the climatic parameters in the area. As for any pollution management, the guidelines are Reduce, Re-use, Recover and Disposal. Amongst the other remediation processes, Bioremediation is amongst the most significant environmentally friendly and cost-effective approaches for marine biological restoration because it allows complex petroleum hydrocarbons in spilt oil to decompose completely into harmless compounds. Mainly, the necessity and essence of bioremediation were talked about. This review discussed the bacteria identified which are capable of degrading various oil related pollutants and their components. Also, it covered the various media components used for screening and growing the oil degrading bacteria and the pathways that are associated with oil degradation. This article also reviewed the recent research carried out related to the oil degrading bacteria.
Assuntos
Poluentes Ambientais , Poluição por Petróleo , Petróleo , Bactérias/metabolismo , Biodegradação Ambiental , Poluentes Ambientais/metabolismo , Hidrocarbonetos/metabolismo , Petróleo/metabolismoRESUMO
Bacillus pumilus, the thermophilic microorganism, was used to biosynthesise lipase of specific activity 5173 U. The purified lipase was highly stable in the pH range from 1 to 7 and temperature at 50 °C. The functionalized nanoporous activated carbon matrix was used for the immobilization of lipase at the optimum conditions and was used for the hydrolysis of palm oil-containing wastewater at optimum time, 3 h, pH 7, and at temperature 50 °C. The hydrolyzed palm oil wastewater was treated in an upflow anaerobic reactor for the removal of soluble COD at hydraulic retention time (HRT) of 3 days. The anaerobic-treated wastewater was applied to the fluidized immobilized carbon catalytic oxidation (FICCO) reactor at HRT of 16 h to reduce the soluble COD. The FICCO-treated wastewater was further treated in chemo-autotrophic activated carbon oxidation (CAACO) reactor to reduce the COD less than 100 mg/L.