Eugenol Improves Follicular Survival and Development During in vitro Culture of Goat Ovarian Tissue.

This study evaluated the effects of different concentrations (10, 20, or 40 µM) of eugenol (EUG 10, EUG 20, or EUG 40), ascorbic acid (50 µg/mL; AA) or anethole (300 µg/mL; ANE 300) on the in-vitro survival and development of goat preantral follicles and oxidative stress in the cultured ovarian tissue. Ovarian fragments from five goats were cultured for 1 or 7 days in Alpha Minimum Essential Medium (α-MEM+) supplemented or not with AA, ANE 300, EUG 10, EUG 20 or EUG 40. On day 7 of culture, when compared to MEM, the addition of EUG 40 had increased the rate of follicular development, as observed by a decrease in the proportion of primordial follicles alongside with an increase in the rate of normally developing follicles. Furthermore, EUG 40 significantly increased both follicular and oocyte diameters. Subsequently, ovarian fragments from three goats were cultured for 1 or 7 days in α-MEM+ supplemented or not with AA, ANE 300 or EUG 40. All tested antioxidants, except ANE 300, were able to significantly decrease the levels of reactive oxygen species in the ovarian tissue, but EUG 40 could most efficiently neutralize free radicals. All ovarian tissues cultured in the presence of antioxidants, especially EUG 40, presented a significant decrease in H3K4me3 labeling, indicating a silencing of genes that play a role in the inhibition of follicular activation and apoptosis induction. When compared to cultured control tissues, both EUG 40 and ANE 300 significantly increased the intensity of calreticulin labeling in growing follicles. The mRNA relative expression of ERP29 and KDM3A was significantly increased when the culture medium was supplemented with EUG 40, indicating a response to ER stress experienced during culture. In conclusion, EUG 40 improved in-vitro follicle survival, activation and development and decreased ROS production, ER stress and histone lysine methylation in goat ovarian tissue.

Antioxidant activity and chemical composition of oleoresin from leaves and flowers of Brunfelsia uniflora.

In this study, the temperature and pressure of supercritical CO2 extraction were evaluated to obtain oleoresin of Brunfelsia uniflora leaves and flowers. The oleoresin compounds were identified by gas chromatography-mass spectrometry. The antioxidant activity was evaluated by three different methods. The highest oleoresin yields were 3.32% at 40°C and 200 bar for the leaves, and 1.03% at 60°C and 200 bar for the flowers. The main extracted compounds from leaves were phytol varying from 11.95 to 36.42% and α-tocopherol from 15.53 to 43.10%, and from flowers were geranyl linalool from 11.05 to 21.42% and α-amyrin from 9.66 to 22.12%. Oleoresin obtained at 60°C and 150 bar from leaves presented high antioxidant activity by DPPH (IC50 1.90 mg/mL) and by FRAP (1.8 µmol Fe2+/mg). ß-carotene/linoleic acid co-oxidation oleoresin from leaves at 0.25 mg/mL presented higher antioxidant activity than Trolox. The total phenolic content of the oleoresin from leaves ranged from 66.20 to 83.33 µg/mg and from flowers it was just up to 12.46 µg/mg. The extraction conditions affected yield, chemical composition, and antioxidant activity of oleoresin from leaves and flowers. This is the first report on the antioxidant activity of B. uniflora oleoresin from leaves and flowers and provides subsidies for potential applications in chemical, pharmaceutical, and food industries.

Processing strategies for smart electroconductive carbon nanotube-based bioceramic bone grafts.

Electroconductive bone grafts have been designed to control bone regeneration. Contrary to polymeric matrices, the translation of the carbon nanotube (CNT) electroconductivity into oxide ceramics is challenging due to the CNT oxidation during sintering. Sintering strategies involving reactive-bed pressureless sintering (RB + P) and hot-pressing (HP) were optimized towards prevention of CNT oxidation in glass/hydroxyapatite (HA) matrices. Both showed CNT retentions up to 80%, even at 1300 °C, yielding an increase of the electroconductivity in ten orders of magnitude relative to the matrix. The RB + P CNT compacts showed higher electroconductivity by ∼170% than the HP ones due to the lower damage to CNTs of the former route. Even so, highly reproducible conductivities with statistical variation below 5% and dense compacts up to 96% were only obtained by HP. The hot-pressed CNT compacts possessed no acute toxicity in a human osteoblastic cell line. A normal cellular adhesion and a marked orientation of the cell growth were observed over the CNT composites, with a proliferation/differentiation relationship favouring osteoblastic functional activity. These sintering strategies offer new insights into the sintering of electroconductive CNT containing bioactive ceramics with unlimited geometries for electrotherapy of the bone tissue.

Carbon nanotube-based bioceramic grafts for electrotherapy of bone.

Bone complexity demands the engineering of new scaffolding solutions for its reconstructive surgery. Emerging bone grafts should offer not only mechanical support but also functional properties to explore innovative bone therapies. Following this, ceramic bone grafts of Glass/hydroxyapatite (HA) reinforced with conductive carbon nanotubes (CNTs) - CNT/Glass/HA - were prepared for bone electrotherapy purposes. Computer-aided 3D microstructural reconstructions and TEM analysis of CNT/Glass/HA composites provided details on the CNT 3D network and further correlation to their functional properties. CNTs are arranged as sub-micrometric sized ropes bridging homogenously distributed ellipsoid-shaped agglomerates. This arrangement yielded composites with a percolation threshold of pc=1.5vol.%. At 4.4vol.% of CNTs, thermal and electrical conductivities of 1.5W·m(-1)·K(-1) and 55S·m(-1), respectively, were obtained, matching relevant requisites in electrical stimulation protocols. While the former avoids bone damaging from Joule's heat generation, the latter might allow the confinement of external electrical fields through the conductive material if used for in vivo electrical stimulation. Moreover, the electrically conductive bone grafts have better mechanical properties than those of the natural cortical bone. Overall, these highly conductive materials with controlled size CNT agglomerates might accelerate bone bonding and maximize the delivery of electrical stimulation during electrotherapy practices.

Copper resistance of different ectomycorrhizal fungi such as Pisolithus microcarpus, Pisolithus sp., Scleroderma sp. and Suillus sp.

Environments contaminated with heavy metals negatively impact the living organisms. Ectomycorrhizal fungi have shown important role in these impacted sites. Thus, this study aimed to evaluate the copper-resistance of ectomycorrhizal fungi isolates Pisolithus microcarpus - UFSC-Pt116; Pisolithus sp. - UFSC-PT24, Suillus sp. - UFSM RA 2.8 and Scleroderma sp. - UFSC-Sc124 to different copper doses in solid and liquid media. The copper doses tested were: 0.00, 0.25, 0.5, 0.75, 1.0 and 1.25 mmol L(-1) in the solid medium and 0.00, 0.32, 0.64 and 0.96 mmol L(-1) in the liquid medium. Copper was amended as copper sulphate in order to supplement the culture medium MNM at pH 4.8, with seven replicates to each fungus-dose combination. The fungal isolates were incubated for 30 days at 28 °C. UFSC-Pt116 showed high copper-resistance such as accessed by CL50 determinations (concentration to reduce 50% of the growth) as while as UFSC-PT24 displayed copper-resistance mechanism at 0.50 mmol L(-1) in solid medium. The UFSC-PT24 and UFSC-Sc124 isolates have increased copper-resistance in liquid medium. The higher production of extracellular pigment was detected in UFSC-Pt116 cultures. The UFSC-Pt116 and UFSC-PT24 isolates showed higher resistance for copper and produced higher mycelium biomass than the other isolates. In this way, the isolates UFSG-Pt116 and UFSC-PT24 can be important candidates to survive in copper-contaminated areas, and can show important role in plants symbiosis in these contaminated sites.

Copper resistance of different ectomycorrhizal fungi such as Pisolithus microcarpus, Pisolithus sp., Scleroderma sp. and Suillus sp.

Environments contaminated with heavy metals negatively impact the living organisms. Ectomy­corrhizal fungi have shown important role in these impacted sites. Thus, this study aimed to evaluate the copper-resistance of ectomycorrhizal fungi isolates Pisolithus microcarpus - UFSC-Pt116; Pisolithus sp. - UFSC-PT24, Suillus sp. - UFSM RA 2.8 and Scleroderma sp. - UFSC-Sc124 to different copper doses in solid and liquid media. The copper doses tested were: 0.00, 0.25, 0.5, 0.75, 1.0 and 1.25 mmol L-1 in the solid medium and 0.00, 0.32, 0.64 and 0.96 mmol L-1 in the liquid medium. Copper was amended as copper sulphate in order to supplement the culture medium MNM at pH 4.8, with seven replicates to each fungus-dose combination. The fungal isolates were incubated for 30 days at 28 °C. UFSC-Pt116 showed high copper-resistance such as accessed by CL50 determinations (concentration to reduce 50% of the growth) as while as UFSC-PT24 displayed copper-resistance mechanism at 0.50 mmol L-1 in solid medium. The UFSC-PT24 and UFSC-Sc124 isolates have increased copper-resistance in liquid medium. The higher production of extracellular pigment was detected in UFSC-Pt116 cultures. The UFSC-Pt116 and UFSC-PT24 isolates showed higher resistance for copper and produced higher mycelium biomass than the other isolates. In this way, the isolates UFSG-Pt116 and UFSC-PT24 can be important candidates to survive in copper-contaminated areas, and can show important role in plants symbiosis in these contaminated sites.

Copper resistance of different ectomycorrhizal fungi such as Pisolithus microcarpus, Pisolithus sp., Scleroderma sp. and Suillus sp

Environments contaminated with heavy metals negatively impact the living organisms. Ectomy­corrhizal fungi have shown important role in these impacted sites. Thus, this study aimed to evaluate the copper-resistance of ectomycorrhizal fungi isolates Pisolithus microcarpus - UFSC-Pt116, Pisolithus sp. - UFSC-PT24, Suillus sp. - UFSM RA 2.8 and Scleroderma sp. - UFSC-Sc124 to different copper doses in solid and liquid media. The copper doses tested were: 0.00, 0.25, 0.5, 0.75, 1.0 and 1.25 mmol L-1 in the solid medium and 0.00, 0.32, 0.64 and 0.96 mmol L-1 in the liquid medium. Copper was amended as copper sulphate in order to supplement the culture medium MNM at pH 4.8, with seven replicates to each fungus-dose combination. The fungal isolates were incubated for 30 days at 28 °C. UFSC-Pt116 showed high copper-resistance such as accessed by CL50 determinations (concentration to reduce 50% of the growth) as while as UFSC-PT24 displayed copper-resistance mechanism at 0.50 mmol L-1 in solid medium. The UFSC-PT24 and UFSC-Sc124 isolates have increased copper-resistance in liquid medium. The higher production of extracellular pigment was detected in UFSC-Pt116 cultures. The UFSC-Pt116 and UFSC-PT24 isolates showed higher resistance for copper and produced higher mycelium biomass than the other isolates. In this way, the isolates UFSG-Pt116 and UFSC-PT24 can be important candidates to survive in copper-contaminated areas, and can show important role in plants symbiosis in these contaminated sites.

Influência do horário de colheita sobre o rendimento e composição do óleo essencial de erva-cidreira brasileira [Lippia alba (Mill. ) N. E. Br. ] / Influence of harvest time on the yield and composition of essential oil from the Brazilian "erva-cidreira" [Lippia alba (Mill. ) N. E. Br. ]

Este trabalho teve como objetivo verificar se o horário de colheita da erva-cidreira brasileira [Lippia alba (Mill.) N. E. Br.], fenotipo carvona-limoneno, tem influência sobre a produção de massa foliar, rendimento e composição do óleo essencial. Foram avaliados cinco horários de colheita quando a cultura estava com 145 dias desde o transplante: 8:00, 10:00, 12:00, 14:00 e 16:00 h com cinco repetições, distribuídos em blocos casualizados. O experimento foi conduzido na Fazenda Experimental Lageado da FCA-UNESP/Botucatu no Setor de Horticultura do Departamento de Produção Vegetal. A colheita foi realizada a 15 cm da superfície do solo e o óleo essencial obtido através de hidrodestilação, em aparelho tipo Clevenger. Levou-se em consideração os fatores agronômicos e o rendimento obtido por hidrodestilação. O óleo essencial foi analisado em cromatógrafo gasoso acoplado a espectrômetro de massas (CG/EM). Os resultados foram submetidos à análise de variância (Teste F) e as médias comparadas pelo teste de Tukey. Não houve diferença estatística para produção de massa foliar, teor de óleo essencial e produtividade de óleo essencial em massa fresca e seca. No entanto, entre os compostos majoritários do óleo essencial das folhas, carvona e limoneno, a melhor produtividade de carvona foi obtida às 10:00 h, em matéria fresca (2,050 L ha-1) e em matéria seca (2,068 L ha-1), e para o limoneno às 16:00 h, em matéria fresca (1,068 L ha-1) e em matéria seca (1,060 L ha-1).

This study aimed to verify whether the harvest time of the "Brazilian erva-cidreira" [Lippia alba (Mill.) N. E. Br.], limonene-carvone chemotype, influences leaf mass production and essential oil yield and composition. Five different harvest times were evaluated at 145 days after transplanting: 8:00, 10:00, 12:00, 14:00 and 16:00, with five replicates, distributed in randomized blocks. The experiment was carried out at Lageado Experimental Farm of the School of Agronomical Sciences FCA-UNESP/Botucatu, Horticulture Sector, Department of Plant Production. Harvest was conducted from 15 cm above the soil surface and essential oil was obtained through steam distillation in a Clevenger-type apparatus. Both the agronomical factors and the yield obtained through steam distillation were considered. The essential oil was analyzed in a gas chromatographer coupled to a mass spectrometer (GC/MS). Results were subjected to analysis of variance (F Test) and means were compared according to Tukey's test. There was no statistical difference for leaf mass production, essential oil content and essential oil yield in fresh and dry matter. However, considering the major essential oil compounds, carvone and limonene, the best yield was obtained at 10:00 for carvone in fresh (2050 L ha-1) and dry matter (2068 L ha-1), and at 16:00 for limonene in fresh (1068 L ha-1) and dry matter (1060 L ha-1).

Si(3)N(4)-bioglass composites stimulate the proliferation of MG63 osteoblast-like cells and support the osteogenic differentiation of human bone marrow cells.

The in vitro osteocompatibility of a novel Si(3)N(4)-bioglass composite (70-30% weight proportion) with improved mechanical properties (fracture toughness = 4.4 M Pa m(1/2); bending strength = 383 +/- 47 MPa) is reported. Immersion of the composite samples in culture medium (30 min to 7 days) resulted in rapid protein adsorption to the surface and, also, dissolution of the intergranular phase of bioglass (time-dependent process) with the formation of different size cavities. "As-received" and pre-treated material samples presented a similar behaviour concerning the proliferation of MG63 osteoblast-like cells, evaluated during a 5-day culture period. Seeded materials showed a higher cell growth rate as compared to cultures performed on the standard plastic culture plates. To assess the osteogenic potential of the composite, "as-received" material samples were seeded with human bone marrow cells and cultured for 35 days in experimental conditions that favour the development of the osteoblastic phenotype. The cell adhesion process was similar to that observed in control cultures. Cells successfully adapted to the irregularities of the surface and were able to grow towards inside the cavities; in addition, osteogenic differentiation occurred with the formation of abundant cell-mediated mineralised deposits. Results suggest that this Si(3)N(4)-bioglass composite seems to be a promising candidate for high-stress medical applications.