Biphasic burst and sustained transdermal delivery in vivo using an AI-optimized 3D-printed MN patch.

The objective of the present study was to fabricate microneedles for delivering lipophilic active ingredients (APIs) using digital light processing (DLP) printing technology and quality by design (QbD) supplemented by artificial intelligence (AI) algorithms. In the present study, dissolvable microneedle (MN) patches using ibuprofen (IBU) as a model drug were successfully fabricated with DLP printing technology at âˆ¼ 750 µm height, ∼250 µm base diameter, and tip with radius of curvature (RoC) of âˆ¼ 15 µm. MN patches were comprised of IBU, photoinitiator, Lithium phenyl (2,4,6-trimethylbenzoyl) phosphinate (LAP), polyethylene glycol dimethacrylate (PEGDAMA)550 and distilled water and were developed using the QbD optimization approach. Optimization of print fidelity and needle morphology were achieved using AI implementing a semi-supervised machine learning approach. Mechanical strength tests demonstrated that IBU MNs formed pores both on Parafilm M® and human cadaver skin. IBU-MNs consisting of 0.23 %w/v and 0.49 %w/v LAP with 10 %w/v water showed âˆ¼ 2 mg/cm2 sustained drug permeation at 72 h in skin permeation experiments with flux of âˆ¼ 40 µg/cm2/h. Pharmacokinetic studies in rats displayed biphasic rapid first-order absorption with sustained zero-order input of Ko = 150ug/hr, AUC0-48h = 62812.02 ± 11128.39 ng/ml*h, Tmax = 2.66 ± 1.12 h, and Cmax = 3717.43 ± 782.25 ng/ml (using 0.23 %w/v LAP IBU MN patch). An in vitro in vivo relation (IVIVR) was conducted identifying a polynomial relationship between patch release and fraction absorbed in vivo. This study demonstrates fabrication of dissolvable DLP-printed microneedle patches for lipophilic API delivery with biphasic rapid first-order and sustained zero-order release.

Cytotoxic and chemosensitizing effects of glycoalkaloidic extract on 2D and 3D models using RT4 and patient derived xenografts bladder cancer cells.

Glycoalkaloids have been widely demonstrated as potential anticancer agents. However, the chemosensitizing effect of these compounds with traditional chemotherapeutic agents has not been explored yet. In a quest for novel effective therapies to treat bladder cancer (BC), we evaluated the chemosensitizing potential of glycoalkaloidic extract (GE) with cisplatin (cDDP) in RT4 and PDX cells using 2D and 3D cell culture models. Additionally, we also investigated the underlying molecular mechanism behind this effect in RT4 cells. Herein, we observed that PDX cells were highly resistant to cisplatin when compared to RT4 cells. IC50 values showed at least 2.16-folds and 1.4-folds higher in 3D cultures when compared to 2D monolayers in RT4 cells and PDX cells, respectively. GE + cDDP inhibited colony formation (40%) and migration (28.38%) and induced apoptosis (57%) in RT4 cells. Combination therapy induced apoptosis by down-regulating the expression of Bcl-2 (p < 0.001), Bcl-xL (p < 0.001) and survivin (p < 0.01), and activating the caspase cascade in RT4 cells. Moreover, decreased expression of MMP-2 and 9 (p < 0.01) were observed with combination therapy, implying its effect on cell invasion/migration. Furthermore, we used 3D bioprinting to grow RT4 spheroids using sodium alginate-gelatin as a bioink and evaluated the effect of GE + cDDP on this system. Cell viability assay showed the chemosensitizing effect of GE with cDDP on bio-printed spheroids. In summary, we showed the cytotoxicity effect of GE on BC cells and also demonstrated that GE could sensitize BC cells to chemotherapy.

Nuclear receptor 4A (NR4A) family - orphans no more.

The orphan nuclear receptors NR4A1, NR4A2 and NR4A3 are immediate early genes induced by multiple stressors, and the NR4A receptors play an important role in maintaining cellular homeostasis and disease. There is increasing evidence for the role of these receptors in metabolic, cardiovascular and neurological functions and also in inflammation and inflammatory diseases and in immune functions and cancer. Despite the similarities of NR4A1, NR4A2 and NR4A3 and their interactions with common cis-genomic elements, they exhibit unique activities and cell-/tissue-specific functions. Although endogenous ligands for NR4A receptors have not been identified, there is increasing evidence that structurally-diverse synthetic molecules can directly interact with the ligand binding domain of NR4A1 and act as agonists or antagonists, and ligands for NR4A2 and NR4A3 have also been identified. Since NR4A receptors are key factors in multiple diseases, there are opportunities for the future development of NR4A ligands for clinical applications in treating multiple health problems including metabolic, neurologic and cardiovascular diseases, other inflammatory conditions, and cancer.

AlgiMatrix™ based 3D cell culture system as an in-vitro tumor model for anticancer studies.

BACKGROUND: Three-dimensional (3D) in-vitro cultures are recognized for recapitulating the physiological microenvironment and exhibiting high concordance with in-vivo conditions. Taking the advantages of 3D culture, we have developed the in-vitro tumor model for anticancer drug screening. METHODS: Cancer cells grown in 6 and 96 well AlgiMatrix™ scaffolds resulted in the formation of multicellular spheroids in the size range of 100-300 µm. Spheroids were grown in two weeks in cultures without compromising the growth characteristics. Different marketed anticancer drugs were screened by incubating them for 24 h at 7, 9 and 11 days in 3D cultures and cytotoxicity was measured by AlamarBlue® assay. Effectiveness of anticancer drug treatments were measured based on spheroid number and size distribution. Evaluation of apoptotic and anti-apoptotic markers was done by immunohistochemistry and RT-PCR. The 3D results were compared with the conventional 2D monolayer cultures. Cellular uptake studies for drug (Doxorubicin) and nanoparticle (NLC) were done using spheroids. RESULTS: IC(50) values for anticancer drugs were significantly higher in AlgiMatrix™ systems compared to 2D culture models. The cleaved caspase-3 expression was significantly decreased (2.09 and 2.47 folds respectively for 5-Fluorouracil and Camptothecin) in H460 spheroid cultures compared to 2D culture system. The cytotoxicity, spheroid size distribution, immunohistochemistry, RT-PCR and nanoparticle penetration data suggested that in vitro tumor models show higher resistance to anticancer drugs and supporting the fact that 3D culture is a better model for the cytotoxic evaluation of anticancer drugs in vitro. CONCLUSION: The results from our studies are useful to develop a high throughput in vitro tumor model to study the effect of various anticancer agents and various molecular pathways affected by the anticancer drugs and formulations.

Effect of cyclodextrins on the complexation and nasal permeation of melatonin.

The inclusion complexation of melatonin (MT) with modified cyclodextrins (CDs) was studied with an objective of improving the solubility and nasal absorption of MT. The formation of inclusion complex of MT with Hydroxypropyl beta CD (HPbeta CD) and randomly methylated beta CD (RMbeta CD) was characterized in solution and solid states by phase solubility and differential scanning calorimetry analyses. The phase solubility data indicate a linear increase in the solubility of MT with CDs demonstrating Higuchi's A(L)-type phase solubility profiles. The effect of CDs on the permeation of MT across EpiAirway(TM)-100 cultures was studied using a modified nonstatic diffusion setup. CDs were employed at different concentrations with 1% w/v micronized MT suspension in hydroxypropyl methyl cellulose (HPMC) vehicle. At low CD concentrations (1% w/v), the permeation of MT from HPMC formulation was significantly increased (125%,p < .001). However, the permeation was significantly reduced when CDs were used at relatively high concentrations (5 to 10% w/v concentration for HPbetaCD and 10% w/v concentration for RMbetaCD,p < .001). All the tissues were viable with good tissue integrity at the end of permeation experiments, as measured by methylthiazoletetrazolium assay and transepithelial electrical resistance measurements. In conclusion, formation of inclusion complex of MT with HPbetaCD and RMbetaCD was demonstrated in solution and solid state. Both HPbetaCD and RM betaCD at 1% w/v concentration were found to improve the nasal permeability of MT from HPMC gel formulations.

In vitro and in vivo evaluation of topical formulations of spantide II.

The purpose of this study was to develop and evaluate topical formulations of Spantide II, a neurokinin-1 receptor (NK-1R) antagonist, for the treatment of inflammatory skin disorders. Spantide II lotion and gel was formulated with and without n-methyl-2-pyrrolidone (NMP) as a penetration enhancer. The release of Spantide II from gels was evaluated using microporous polyethylene and polypropylene membranes in a Franz Diffusion cell setup. In vitro percutaneous absorption of Spantide II from lotion and gel formulations was evaluated using the above setup by replacing the membranes with hairless rat skin. The in vivo anti-inflammatory activity of Spantide II formulations was evaluated in an allergic contact dermatitis (ACD) mouse model. Among different gels studied, PF127 gel showed highest (70-fold) release of Spantide II compared with hydroxypropyl methylcellulose (HPMC) and hydroxypropyl cellulose (HPC) gels. Lotion and gel formulations with or without NMP showed no detectable levels of Spantide II in the receiver compartment of the Franz diffusion cell until 24 hours. However, Spantide II showed significant retention in epidermis and dermis from lotion and gel formulations at 24 hours. The dermal levels increased approximately 3.5- and 2-fold when the lotion and gel formulations contained NMP as compared with the formulation with no NMP (P < .05). The in vivo studies indicated that Spantide II formulations with NMP were effective in significantly reducing ACD response, similar to dexamethasone (0.5 mM). In conclusion, Spantide II was stable as a topical formulation and delivered to target skin tissue (epidermis and dermis) for the treatment of ACD. In addition this study supports the role of cutaneous neurosensory system in modulating inflammatory responses in the skin.

Evaluation of different parameters that affect droplet-size distribution from nasal sprays using the Malvern Spraytec.

The applicability of laser diffraction (Spraytec) for characterizing the droplet-size distribution (DSD) from nasal sprays was examined to understand the relationship between physical properties of nasal formulations and their spray characteristics. The impact of actuation force (3-7 kg), rheological properties from carboxymethylcellulose (CMC) and carbopol 934PNF, the influence of surfactant (Tween 80), actuation distance, and different nasal-pump designs on the aerosol DSD of nasal sprays were investigated using Spraytec((R)) with the eNSP actuation station (InnovaSystems, Moorestown, NJ). Spray-pattern analysis was performed by monitoring the emitted nasal spray containing a dye or a fluorescent marker. Parameters for DSD and spray pattern included: Dv(10), Dv(50), Dv(90), polydispersity, minimum and maximum diameters, plume area, and ovality. Increasing actuation distance from 1.5 to 6 cm from the laser beam decreased Dv(50) values by 17-27% for commercial nasal-spray products. Spray-pattern analysis revealed a power law relationship between viscosity and surface area for CMC formulations. However, this relationship could not be obtained for carbopol formulations, which was attributed to differences in their rheological behavior. The addition of surfactant (0.5-5% Tween 80) to a 2% CMC solution decreased the Dv(50) values (16-26%) and altered the rheological properties (e.g., changes in viscosity and appearance of the thixotropic system). Briefly, the characteristic of nasal aerosol generation is dependent on a combination of actuation force, viscosity, rheological properties, surface tension, and pump design. The Spraytec with the eNSP actuation station provides an efficient and reliable way of monitoring the effects of formulation variables on DSD from nasal aerosols.

Formulation and in vitro evaluation of transdermal patches of melatonin.

The present study was undertaken to prepare and evaluate monolithic drug-inadhesive type transdermal patches of melatonin containing penetration enhancers such as fatty alcohols, fatty acids, and terpenes. The patches were prepared using Eudragit E 100 as the adhesive polymer. The release profile of melatonin from control as well as enhancer-containing patches showed an initial burst of melatonin release for up to 4 hours and then a plateau after 8 hours. The release profiles of melatonin from patches containing various enhancers were similar to the control patch. However, the addition of enhancers in the patch increased the permeation of melatonin through hairless rat skin. The flux values of patches containing octanol, nonanoic acid, and myristic acid were higher than the control patch (no enhancer), but the differences were not statistically significant (P>0.05). Decanol, myristyl alcohol, and undecanoic acid at 5% concentrations showed significantly higher flux values through hairless rat skin (enhancement ratios 1.7, 1.5, and 1.6 for decanol, myristyl alcohol, and undecanoic acid, respectively) (P<0.05). Menthol and limonene at 5% w/w showed maximum permeation of melatonin among all enhancers studied (enhancement ratios=2.1 and 2.0 for menthol and limonene, respectively) (P<0.001). In general, there was about 4-6 hours of lag time observed before a steady state flux of melatonin was achieved. Though the flux of melatonin observed in the present study is 5-10 times higher than the required delivery rate in humans, it must be noted that the present study was performed using hairless rat skin, which is generally more permeable compared to human skin. Further studies using human skin would prove the usefulness of these patches.