Cross-modality imaging of bisphosphonate-treated murine jawbones.

In this proof-of-principle study, we established and implemented a cross-modality imaging (CMI) pipeline to characterize and compare bisphosphonate (BIS)-treated jawbones of Sprague-Dawley rats after tooth extraction after physical therapies (photobiomodulation and extracorporeal shockwave therapy (PBMT and ESWT)). We showcase the feasibility of such a CMI approach and its compatibility across imaging modalities to probe the same region of interest (ROI) of the same jawbone. Jawbones were imaged in toto in 3D using micro-Computed Tomography to identify ROIs for subsequent sequential 2D analysis using well-established technologies such as Atomic Force Microscopy and Scanning Electron Microscopy, and recent imaging approaches in biomedical settings, such as micro-X-Ray Fluorescence Spectroscopy. By combining these four modalities, multiscale information on the morphology, topography, mechanical stiffness (Young's modulus), and calcium, zinc and phosphorus concentrations of the bone was collected. Based on the CMI pipeline, we characterized and compared the jawbones of a previously published clinically relevant rat model of BIS-related osteonecrosis of the jawbone (BRONJ) before and after treatment with BISs, PBMT and ESWT. While we did not find that physical therapies altered the mechanical and elemental jawbone parameters with significance (probably due to the small sample size of only up to 5 samples per group), both ESWT and PBMT reduced pore thicknesses and bone-to-enamel distances significantly compared to the controls. Although focused on BIS-treated jawbones, the established CMI platform can be beneficial in the study of bone-related diseases in general (such as osteoarthritis or -porosis) to acquire complementary hallmarks and better characterize disease status and alleviation potentials.

Total reflection X-ray fluorescence analysis of elemental composition of herbal infusions and teas.

BACKGROUND: The elemental composition of herbal infusions and teas has not been sufficiently investigated. It could potentially be used for defining fingerprints for individual herbal / tea infusions, differentiation of botanical families, detecting the influence of packaging, and other purposes. The objective of this study was to determine the elemental composition, including the trace element content, of various herbal infusions and teas by means of total reflection X-ray fluorescence analysis (TXRF), with a chemometrics approach using principal component analysis (PCA). RESULTS: This study determined the elemental composition of various herbal infusions and teas, including trace elements, using total reflection X-ray fluorescence (TXRF). The methodology for the sample preparation was established, including the multiple-steepings procedure for the two tea samples (Oolong and Pu-erh). Data from 29 samples were collected. We hypothesized that the elemental content of infusions could reflect certain features, such as the influence of processing and the type of tea. CONCLUSION: A chemometric approach (PCA) was applied, and differences between teas and herbal infusions were found. This was further corroborated by explicit differentiation of one botanical family, Theaceae. The influence of packaging (tea bags) on herbal material was identified. The three types of tea (Camellia sinensis) appeared to be separated with PCA, and elemental concentrations in Pu-erh changed with multiple steepings.

Complex forming competition and in-vitro toxicity studies on the applicability of di-2-pyridylketone-4,4,-dimethyl-3-thiosemicarbazone (Dp44mT) as a metal chelator.

Di-2-pyridylketone-4,4,-dimethyl-3-thiosemicarbazone (Dp44mT) is a potential candidate in chelation therapy as an iron chelator. This study showed that a combined treatment with 2µM easily available Fe(II), Cu(II) and Zn(II) each and 5µM Dp44mT on eight different cancer cell lines resulted in a 10-40-fold increase in the intracellular Cu content compared to control samples. The uptake of Cu and Cu-dependent cytotoxicity strictly depend on the Cu concentration of the culture medium. Even as low concentration of Dp44mT as 0.1µM can transport high amounts of copper inside the cells. The Cu accumulation and toxicity through Dp44mT can hardly be influenced by Fe. Copper uptake and toxicity triggered by 2µM extracellular Cu(II) and 5µM Dp44mT could not be influenced by Fe(II) extracellular concentrations even 50-times higher than that of Cu(II). A 50-times higher Co(II) extracellular concentration hindered the Cu(II) uptake almost completely and a 10-times higher Co(II) concentration already decreased the Dp44mT-mediated Cu toxicity. Conditional complex stability constant determinations for Dp44mT with Cu(II), Co(II), Fe(II), Ni(II) and Zn(II) revealed that the metal-to-ligand ratio is 1:1 in [Cu(II)Dp44mT] complex, while for Co(II), Fe(II) and Ni(II) is 1:2. The highest stability constant was obtained for Cu(II) (lg ß=7.08±0.05) and Co(II) (lg ß2=12.47±0.07). According to our results, Dp44mT in combination with Cu is highly toxic in vitro. Therefore, the use of Dp44mT as an iron chelator is limited if biologically available Cu is also present even at low concentrations.

Microanalytical method development for Fe, Cu and Zn determination in colorectal cancer cells.

Microanalytical methods suitable for the determination of Fe, Cu in HT-29 (human colon adenocarcinoma) cells treated with different iron compounds (Fe(II) sulfate, Fe(III) chloride, Fe(III) citrate and Fe(III) transferrin) and cultured in medium supplemented or not with 10% (v/v) fetal calf serum (FCS) by total reflection X-ray fluorescence spectrometry (TXRF) and simultaneous graphite furnace atomic absorption spectrometry (GF-AAS) were developed. The developed TXRF method was also suitable for Zn determination in the samples. The main advantage of the proposed methods is the execution of all sample preparation steps following incubation and prior to the elemental analysis in the same Eppendorf tubes. Sample preparation was performed at microscale (115 µL sample volume) with 65% nitric acid and 30% hydrogen peroxide. According to scanning electron microscopic measurements, the organic matrix of the cell samples could be eliminated to the extent that accurate results were obtained for Cu and Fe by analyzing the same samples by TXRF and GF-AAS. Concerning the iron uptake, HT-29 cells incubated in FCS-free medium contained Fe in cca. 5-50 times higher amounts compared to cells cultured in FCS supplemented medium. Pronounced differences in the iron uptake compared to the iron supply (inorganic vs. organic chelated as well as iron(II) vs. iron(III)) were observed in the case of cell lines incubated in FCS-free medium.

Direct analysis of Al2O3 powders by total reflection X-ray fluorescence spectrometry.

A direct analysis procedure for the determination of trace impurities of Ca, V, Cr, Mn, Fe, Ni, Cu, Zn and Ga in Al2O3 ceramic powders by total reflection X-ray fluorescence spectrometry (TXRF) is described. The powders were analysed in the form of slurries containing 1-10 mg mL(-1) of powder. The use of the procedure in the case of powders with differing grain size and for different slurry concentrations was investigated. Three different quantification possibilities were compared, namely the use of Al as a matrix component, the use of Fe as a trace element contained in the sample or of Co added in concentrations of 200 microg g(-1) as internal standard. The homogeneity of elemental distributions in sample layers deposited on the TXRF quartz carriers by evaporating 5 microL of the 10 mg mL(-1) slurries was studied by scanning the 4- to 5-mm-diameter spots of two samples by synchrotron radiation TXRF at Hasylab. For powders with differing graininess but mainly finer than about a few 10 microm, no systematic influence of the grain size on the accuracy of the determinations of Ca, V, Fe, Ni, Cu and Zn could be observed. The measurement precision, however, seemed to be limited by inhomogeneous distributions of the trace elements in the samples as testified by the synchrotron radiation TXRF scans. Detection limits of the developed TXRF procedure for Ca, V, Cr, Mn, Fe, Ni, Cu, Zn and Ga were found to be in the 0.3-7 microg g(-1) range and were shown to increase slightly with the grain size of the samples. Quantification using Al (matrix) as internal standard led to systematically higher values out of the accuracy required, whereas the other two approaches in all cases led to reliable results.