The Active Ingredient Catalpol in Rehmannia glutinosa Reduces Blood Glucose in Diabetic Rats via the AMPK Pathway.

Background: Type 2 diabetes mellitus (T2DM) poses a huge threat to population health globally, and more drugs need to be explored for treatment. In this study, we investigated the mechanism of active ingredient catalpol in Rehmannia glutinosa on reduces blood glucose in diabetic. Methods: The T2DM model was constructed by intraperitoneal injection of streptozotocin into Sprague-Dawley (SD) rats, which were randomly grouped into diabetes model group, pioglitazone group, Rehmannia glutinosa group, catalpol high-dose group, catalpol low-dose group and normal control group.The intervention was continued for 28 d, and changes in body weight, fasting blood glucose, insulin and lipid levels were observed. Results: Of all the drugs, pioglitazone had the most pronounced hypoglycemic effect, which began to decline after 2 weeks of treatment in the low-dose catalpol group and had no hypoglycemic effect in the high-dose catalpol group. Among them, Rehmannia glutinosa was able to increase serum triglyceride level, and pioglitazone effectively reduced total cholesterol level in rats. The low dose of catalpol decreased the concentration of low-density lipoprotein cholesterol (LDL), while the high dose of catalpol increased the concentration of LDL. Conclusion: As an active ingredient in Rehmannia glutinosa, catalpol has the potential to lower blood glucose and improve blood lipids in diabetes treatment, and its action may be achieved by regulating the adenosine 5'-monophosphate (AMP)-activated protein kinase (AMPK) signaling pathway, which provides a new idea for the development of new diabetes therapeutic approaches.

Mild Hydrothermal Synthesis of 11Å-TA from Alumina Extracted Coal Fly Ash and Its Application in Water Adsorption of Heavy Metal Ions (Cu(II) and Pb(II)).

Non-biodegradable copper (Cu) and lead (Pb) contaminants in water are highly toxic and have series adverse effects. Therefore, it is very important to extract heavy metals from wastewater before it is discharged into the environment. Adsorption is a cost-effective alternative method for wastewater treatment. Choosing a low-cost adsorbent can help reduce the cost of adsorption. In this study, conversion of reside after extracting aluminum (REA) produced by sub-molten salt method transform high-alumina coal fly ash (CFA) into 11Å-tobermorite to adsorb Cu(II) and Pb(II) from aqueous solutions at room temperature. The synthesis of the adsorbent was confirmed using scanning electron microscope (SEM), X-ray diffractometer (XRD) and Brunauer-Emmett-Teller (BET) method surface analysis. To study the adsorption characteristics, factors such as initial Cu(II) and Pb(II) concentration, pH, contact time, adsorption characteristics and temperature were investigated in batch mode. The maximum adsorption capacity of Cu(II) and Pb(II) was 177.1 mg·g-1 and 176.2 mg·g-1, respectively. The Langmuir adsorption model was employed to better describe the isothermal adsorption behavior and confirm the monolayer adsorption phenomenon. The pseudo-second-order kinetic model was used to highlight Cu(II) and Pb(II) adsorption kinetics. Thermodynamic analysis indicated the removal Cu(II) and Pb(II) by TA-adsorbent was a nonspontaneous and exothermic reaction. The obtained results are of great significance to the conversion of industrial waste to low-cost adsorbent for Cu(II) and Pb(II) removal from water.

Leaching behavior of U, Mn, Sr, and Pb from different particle-size fractions of uranium mill tailings.

Pollution by the release of heavy metals from tailings constitutes a potential threat to the environment. To characterize the processes governing the release of Mn, Sr, Pb, and U from the uranium mill tailings, a dynamic leaching test was applied for different size of uranium mill tailings samples. Inductively coupled plasma atomic emission spectroscopy (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS) were performed to determine the content of Mn, Sr, Pb, and U in the leachates. The release of mobile Mn, Sr, Pb, and U fraction was slow, being faster in the initial stage and then attained a near steady-state condition. The experimental results demonstrate that the release of Mn, Sr, Pb, and U from uranium mill tailings with different size fractions is controlled by a variety of mechanisms. Surface wash-off is the release mechanism for Mn. The main release mechanism of Sr and Pb is the dissolution in the initial leaching stage. For U, a mixed process of wash-off and diffusion is the controlling mechanism.

Release behavior of uranium in uranium mill tailings under environmental conditions.

Uranium contamination is observed in sedimentary geochemical environments, but the geochemical and mineralogical processes that control uranium release from sediment are not fully appreciated. Identification of how sediments and water influence the release and migration of uranium is critical to improve the prevention of uranium contamination in soil and groundwater. To understand the process of uranium release and migration from uranium mill tailings under water chemistry conditions, uranium mill tailing samples from northwest China were investigated with batch leaching experiments. Results showed that water played an important role in uranium release from the tailing minerals. The uranium release was clearly influenced by contact time, liquid-solid ratio, particle size, and pH under water chemistry conditions. Longer contact time, higher liquid content, and extreme pH were all not conducive to the stabilization of uranium and accelerated the uranium release from the tailing mineral to the solution. The values of pH were found to significantly influence the extent and mechanisms of uranium release from minerals to water. Uranium release was monitored by a number of interactive processes, including dissolution of uranium-bearing minerals, uranium desorption from mineral surfaces, and formation of aqueous uranium complexes. Considering the impact of contact time, liquid-solid ratio, particle size, and pH on uranium release from uranium mill tailings, reducing the water content, decreasing the porosity of tailing dumps and controlling the pH of tailings were the key factors for prevention and management of environmental pollution in areas near uranium mines.

Effects of nanocrystalline PbSe on hematopoietic system and bone marrow micronucleus rate of rats.

OBJECTIVE: To investigate the effect of lead selenide nanocrystals on hematopoietic system and bone marrow micronucleus rate of rats. METHOD: Specific pathogen free SD rats were randomly divided into 4 groups (8 rats in each group), and injected with of 0 (control group), 10 (low dose group), 20 (middle dose group), 30 mg/kg (high dose group) nanocrystalline PbSe, respectively. Seven weeks after injection, the blood was taken from rats for routine index detection; the number of micronucleus cells per 1000 polychromatic erythrocyte from bone marrow was counted. RESULTS: White blood cell (WBC), lymphocyte (LYM) count in low dose group rats, and WBC, LYM, granulocyte (GRN), monocytes (MOD) counts in high dose group significantly increased compared to those of control group. LYM% ratio decreased while GRN% ratio increased along with the increase of exposure dosage. Compared with those of the control group, levels of erythrocyte mean corpuscular volume (MCV) in low dose group, hemoglobin (HGB), red blood cell specific volume (HCT), MCV in middle dose group and red blood cell (RBC), HGB, HCT, MCV in high dose group, were markedly decreased. Red blood cell distribution width (RDW), blood platelet (PLT) levels in three exposure groups of were higher than those in control group. Marrow micronucleus test results showed that, the micronucleus rate rise in mid dose and high dose group compared with the control group, suggesting that nanocrystalline PbSe has genetic toxicity on rats. CONCLUSIONS: Nano PbSe can lead to changes in blood routine index and bone marrow micronucleus rate, and its toxicity was positively related to the dosage.

Bioremediation of Petrochemical Wastewater Containing BTEX Compounds by a New Immobilized Bacterium Comamonas sp. JB in Magnetic Gellan Gum.

In this study, we investigated the bioremediation of petrochemical wastewater containing BTEX compounds by immobilized Comamonas sp. JB cells. Three kinds of magnetic nanoparticles were evaluated as immobilization supports for strain JB. After comparison with Fe3O4 and a-Fe2O3 nanoparticles, r-Fe2O3 nanoparticle was selected as the optimal immobilization support. The highest biodegradation activity of r-Fe2O3-magnetically immobilized cells was obtained when the concentration of r-Fe2O3 nanoparticle was 120 mg L(-1). Additionally, the recycling experiments demonstrated that the degradation activity of r-Fe2O3-magnetically immobilized cells was still high and led to less toxicity than untreated wastewater during the eight recycles. qPCR suggested the concentration of strain JB in r-Fe2O3-magnetically immobilized cells was evidently increased after eight cycles of degradation experiments. These results supported developing efficient biocatalysts using r-Fe2O3-magnetically immobilized cells and provided a promising technique for improving biocatalysts used in the bioremediation of not only petrochemical wastewater but also other hazardous wastewater.

Phenoloxidase from the sea cucumber Apostichopus japonicus: cDNA cloning, expression and substrate specificity analysis.

Phenoloxidase (PO) is a crucial component of the immune system of echinoderms. In the present study, the full-length cDNA of PO (AjPO) was cloned from coelomocytes of the sea cucumber Apostichopus japonicus using 3'- and 5'-rapid amplification of cDNA ends (RACE) PCR method, which is 2508 bp, with an open reading frame (ORF) of 2040 bp encoding 679 amino acids. AjPO contains a transmembrane domain, and three Cu-oxidase domains with copper binding centers formed by 10 histidines, one cysteine and one methionine respectively. Phylogenetic analysis revealed that AjPO was clustered with laccase-type POs of invertebrates. Using the isolated membrane proteins as crude AjPO, the enzyme could catalyze the substrates catechol, L-3,4-dihydroxyphenylalanine (L-DOPA), dopamine and hydroquinone, but failed to oxidize tyrosine. The results described above collectively proved that AjPO was a membrane-binding laccase-type PO. The quantitative real-time PCR (qRT-PCR) analysis revealed that AjPO mRNA was expressed in muscle, body wall, coelomocytes, tube feet, respiratory tree and intestine with the highest expression level in coelomocytes. AjPO could be significantly induced by lipopolysaccharide (LPS), peptidoglycan (PGN), Zymosan A and polyinosinic-polycytidylic acid (PolyI:C), suggesting AjPO is closely involved in the defense against the infection of bacteria, fungi and double-stranded RNA viruses.