RESUMO
Phosphorus (P) recovery from waste streams is an essential choice due to the coming global P crisis. One promising solution is to recover P by microbial electrolysis cell (MEC). Both the P recovery effectiveness and product quality are of critical importance for application. In this study, a two-chamber MEC was constructed and the effects of applied voltage, NaAc concentration, Mg/P molar ratio, N/P molar ratio, and initial P concentration on P recovery and product purity were explored. The maximum P recovery efficiency of 99.64 % and crystal accumulation rate over 106.49 g/m3-d were achieved. Struvite (MAP) was confirmed as the final recovered product and the purity obtained could reach up to 99.95 %. Besides, higher applied voltage, N/P molar ratio and initial P concentration could promote P recovery efficiency, while the purity of MAP showed correlation with applied voltage, Mg/P molar ratio, N/P molar ratio and initial P concentration. The correlation between NaAc concentration and both of the above was not very significant. A lower energy consumption of 4.1 kWh/kg P was observed at the maximum P recovery efficiency. In addition, the efficiency of P recovery from real wastewater also could reach nearly 88.25 %. These results highlight the promising potential of efficient phosphorus recovery from P-rich wastewater by MEC.