Impact of Biogenic and Chemogenic Selenium Nanoparticles on Model Eukaryotic Lipid Membranes.

Microbial nanotechnology is an expanding research area devoted to producing biogenic metal and metalloid nanomaterials (NMs) using microorganisms. Often, biogenic NMs are explored as antimicrobial, anticancer, or antioxidant agents. Yet, most studies focus on their applications rather than the underlying mechanism of action or toxicity. Here, we evaluate the toxicity of our well-characterized biogenic selenium nanoparticles (bSeNPs) produced by the Stenotrophomonas maltophilia strain SeITE02 against the model yeast Saccharomyces cerevisiae comparing it with chemogenic SeNPs (cSeNPs). Knowing from previous studies that the biogenic extract contained bSeNPs in an organic material (OM) and supported here by Fourier transform infrared spectroscopy, we removed and incubated it with cSeNPs (cSeNPs_OM) to assess its influence on the toxicity of these formulations. Specifically, we focused on the first stages of the eukaryotic cell exposure to these samples─i.e., their interaction with the cell lipid membrane, which was mimicked by preparing vesicles from yeast polar lipid extract or phosphatidylcholine lipids. Fluidity changes derived from biogenic and chemogenic samples revealed that the bSeNP extract mediated the overall rigidification of lipid vesicles, while cSeNPs showed negligible effects. The OM and cSeNPs_OM induced similar modifications to the bSeNP extract, reiterating the need to consider the OM influence on the physical-chemical and biological properties of bSeNP extracts.

Tellurite and Selenite: how can these two oxyanions be chemically different yet so similar in the way they are transformed to their metal forms by bacteria?

This opinion review explores the microbiology of tellurite, TeO32- and selenite, SeO32- oxyanions, two similar Group 16 chalcogen elements, but with slightly different physicochemical properties that lead to intriguing biological differences. Selenium, Se, is a required trace element compared to tellurium, Te, which is not. Here, the challenges around understanding the uptake transport mechanisms of these anions, as reflected in the model organisms used by different groups, are described. This leads to a discussion around how these oxyanions are subsequently reduced to nanomaterials, which mechanistically, has controversies between ideas around the molecule chemistry, chemical reactions involving reduced glutathione and reactive oxygen species (ROS) production along with the bioenergetics at the membrane versus the cytoplasm. Of particular interest is the linkage of glutathione and thioredoxin chemistry from the cytoplasm through the membrane electron transport chain (ETC) system/quinones to the periplasm. Throughout the opinion review we identify open and unanswered questions about the microbial physiology under selenite and tellurite exposure. Thus, demonstrating how far we have come, yet the exciting research directions that are still possible. The review is written in a conversational manner from three long-term researchers in the field, through which to play homage to the late Professor Claudio Vásquez.

Tellurite and Selenite: how can these two oxyanions be chemically different yet so similar in the way they are transformed to their metal forms by bacteria?

This opinion review explores the microbiology of tellurite, TeO32− and selenite, SeO32− oxyanions, two similar Group 16 chalcogen elements, but with slightly different physicochemical properties that lead to intriguing biological differences. Selenium, Se, is a required trace element compared to tellurium, Te, which is not. Here, the challenges around understanding the uptake transport mechanisms of these anions, as reflected in the model organisms used by different groups, are described. This leads to a discussion around how these oxyanions are subsequently reduced to nanomaterials, which mechanistically, has controversies between ideas around the molecule chemistry, chemical reactions involving reduced glutathione and reactive oxygen species (ROS) production along with the bioenergetics at the membrane versus the cytoplasm. Of particular interest is the linkage of glutathione and thioredoxin chemistry from the cytoplasm through the membrane electron transport chain (ETC) system/quinones to the periplasm. Throughout the opinion review we identify open and unanswered questions about the microbial physiology under selenite and tellurite exposure. Thus, demonstrating how far we have come, yet the exciting research directions that are still possible. The review is written in a conversational manner from three long-term researchers in the field, through which to play homage to the late Professor Claudio Vásquez.

Zinc and SARS­CoV­2: A molecular modeling study of Zn interactions with RNA­dependent RNA­polymerase and 3C­like proteinase enzymes.

RNA­dependent RNA­polymerase (RdRp) and 3C­like proteinase (3CLpro) are two main enzymes that play a key role in the replication of SARS­CoV­2. Zinc (Zn) has strong immunogenic properties and is known to bind to a number of proteins, modulating their activities. Zn also has a history of use in viral infection control. Thus, the present study models potential Zn binding to RdRp and the 3CLpro. Through molecular modeling, the Zn binding sites in the aforementioned two important enzymes of viral replication were found to be conserved between severe acute respiratory syndrome (SARS)­coronavirus (CoV) and SARS­CoV­2. The location of these sites may influence the enzymatic activity of 3CLpro and RdRp in coronavirus disease 2019 (COVID­19). Since Zn has established immune health benefits, is readily available, non­expensive and a safe food supplement, with the comparisons presented here between SARS­CoV and COVID­19, the present study proposes that Zn could help ameliorate the disease process of COVID­19 infection.

Biomolecular composition of capping layer and stability of biogenic selenium nanoparticles synthesized by five bacterial species.

Biogenic metal/metalloid nanoparticles of microbial origin retain a functional biomolecular capping layer that confers structural stability. Little is known about the composition of such capping material. In this study, selenium nanoparticles (SeNPs) synthesized by five different bacterial strains underwent comparative analysis with newly proposed protocols for quantifying the concentration of carbohydrates, proteins and lipids present in capping layers. SeNPs were therefore treated with two different detergents to remove portions of the surrounding caps in order to assess the resulting effects. Capping material quantification was carried out along with the measure of parameters such as hydrodynamic diameter, polydispersity and surface charge. SeNPs from the five strains showed differences in their distinct biomolecule ratios. On the other hand, structural changes in the nanoparticles induced by detergents did not correlate with the amounts of capping matrix removed. Thus, the present investigation suggests a hypothesis to describe capping layer composition of the bacterial SeNPs: some biomolecules are bound more strongly than others to the core metalloid matrix, so that the diverse capping layer components differentially contribute to the overall structural characteristics of the nanoparticles. Furthermore, the application of the approach here in combining quantification of cap-associated biomolecules with the measurement of structural integrity-related parameters can give the biogenic nanomaterial field useful information to construct a data bank on biogenically synthesized nanostructures.

Biosynthesis of selenium-nanoparticles and -nanorods as a product of selenite bioconversion by the aerobic bacterium Rhodococcus aetherivorans BCP1.

The wide anthropogenic use of selenium compounds represents the major source of selenium pollution worldwide, causing environmental issues and health concerns. Microbe-based strategies for metal removal/recovery have received increasing interest thanks to the association of the microbial ability to detoxify toxic metal/metalloid polluted environments with the production of nanomaterials. This study investigates the tolerance and the bioconversion of selenite (SeO32-) by the aerobically grown Actinomycete Rhodococcus aetherivorans BCP1 in association with its ability to produce selenium nanoparticles and nanorods (SeNPs and SeNRs). The BCP1 strain showed high tolerance towards SeO32- with a Minimal Inhibitory Concentration (MIC) of 500mM. The bioconversion of SeO32- was evaluated considering two different physiological states of the BCP1 strain, i.e. unconditioned and/or conditioned cells, which correspond to cells exposed for the first time or after re-inoculation in fresh medium to either 0.5 or 2mM of Na2SeO3, respectively. SeO32- bioconversion was higher for conditioned grown cells compared to the unconditioned ones. Selenium nanostructures appeared polydisperse and not aggregated, as detected by electron microscopy, being embedded in an organic coating likely responsible for their stability, as suggested by the physical-chemical characterization. The production of smaller and/or larger SeNPs was influenced by the initial concentration of provided precursor, which resulted in the growth of longer and/or shorter SeNRs, respectively. The strong ability to tolerate high SeO32- concentrations coupled with SeNP and SeNR biosynthesis highlights promising new applications of Rhodococcus aetherivorans BCP1 as cell factory to produce stable Se-nanostructures, whose suitability might be exploited for biotechnology purposes.

Antimicrobial activity of biogenically produced spherical Se-nanomaterials embedded in organic material against Pseudomonas aeruginosa and Staphylococcus aureus strains on hydroxyapatite-coated surfaces.

In an effort to prevent the formation of pathogenic biofilms on hydroxyapatite (HA)-based clinical devices and surfaces, we present a study evaluating the antimicrobial efficacy of Spherical biogenic Se-Nanostructures Embedded in Organic material (Bio Se-NEMO-S) produced by Bacillus mycoides SelTE01 in comparison with two different chemical selenium nanoparticle (SeNP) classes. These nanomaterials have been studied as potential antimicrobials for eradication of established HA-grown biofilms, for preventing biofilm formation on HA-coated surfaces and for inhibition of planktonic cell growth of Pseudomonas aeruginosa NCTC 12934 and Staphylococcus aureus ATCC 25923. Bio Se-NEMO resulted more efficacious than those chemically produced in all tested scenarios. Bio Se-NEMO produced by B. mycoides SelTE01 after 6 or 24 h of Na2 SeO3 exposure show the same effective antibiofilm activity towards both P. aeruginosa and S. aureus strains at 0.078 mg ml-1 (Bio Se-NEMO6 ) and 0.3125 mg ml-1 (Bio Se-NEMO24 ). Meanwhile, chemically synthesized SeNPs at the highest tested concentration (2.5 mg ml-1 ) have moderate antimicrobial activity. The confocal laser scanning micrographs demonstrate that the majority of the P. aeruginosa and S. aureus cells exposed to biogenic SeNPs within the biofilm are killed or eradicated. Bio Se-NEMO therefore displayed good antimicrobial activity towards HA-grown biofilms and planktonic cells, becoming possible candidates as new antimicrobials.

Relationship between craniocervical orientation and center of force of occlusion in adults.

OBJECTIVE: Clinical observation and anecdotal reports suggest changes can occur to dental occlusion following intervention with the National Upper Cervical Chiropractic Association (NUCCA) procedure. This case controlled study discerned if occlusion changes are measurable using a dental force plate (T-Scan®) following an adjustment to the craniocervical junction (CCJ). METHODS: A degree of case control was established by active patients being assessed twice prior to and following intervention. Before-after intervention assessment included posture evaluation and dental occlusion (T-Scan®). RESULTS: Findings suggest that changes in posture and occlusion can be observed after the NUCCA chiropractic procedure. Not all patients demonstrated a more balanced contact pattern following the adjustment, indicating a need for further investigation. DISCUSSION: These findings may suggest interconnectivity between the CCJ and an individual's occlusal contacts and support the need for further integration between chiropractors and dentists seeking to co-manage temporomandibular joint disorders.

Evaluating the Metal Tolerance Capacity of Microbial Communities Isolated from Alberta Oil Sands Process Water.

Anthropogenic activities have resulted in the intensified use of water resources. For example, open pit bitumen extraction by Canada's oil sands operations uses an estimated volume of three barrels of water for every barrel of oil produced. The waste tailings-oil sands process water (OSPW)-are stored in holding ponds, and present an environmental concern as they are comprised of residual hydrocarbons and metals. Following the hypothesis that endogenous OSPW microbial communities have an enhanced tolerance to heavy metals, we tested the capacity of planktonic and biofilm populations from OSPW to withstand metal ion challenges, using Cupriavidus metallidurans, a known metal-resistant organism, for comparison. The toxicity of the metals toward biofilm and planktonic bacterial populations was determined by measuring the minimum biofilm inhibitory concentrations (MBICs) and planktonic minimum inhibitory concentrations (MICs) using the MBEC ™ assay. We observed that the OSPW community and C. metallidurans had similar tolerances to 22 different metals. While thiophillic elements (Te, Ag, Cd, Ni) were found to be most toxic, the OSPW consortia demonstrated higher tolerance to metals reported in tailings ponds (Al, Fe, Mo, Pb). Metal toxicity correlated with a number of physicochemical characteristics of the metals. Parameters reflecting metal-ligand affinities showed fewer and weaker correlations for the community compared to C. metallidurans, suggesting that the OSPW consortia may have developed tolerance mechanisms toward metals present in their environment.

Mixed-species biofilms cultured from an oil sand tailings pond can biomineralize metals.

Here, we used an in vitro biofilm approach to study metal resistance and/or tolerance of mixed-species biofilms grown from an oil sand tailings pond in northern Alberta, Canada. Metals can be inhibitory to microbial hydrocarbon degradation. If microorganisms are exposed to metal concentrations above their resistance levels, metabolic activities and hydrocarbon degradation can be slowed significantly, if not inhibited completely. For this reason, bioremediation strategies may be most effective if metal-resistant microorganisms are used. Viability was measured after exposure to a range of concentrations of ions of Cu, Ag, Pb, Ni, Zn, V, Cr, and Sr. Mixed-species biofilms were found to be extremely metal resistant; up to 20 mg/L of Pb, 16 mg/L of Zn, 1,000 mg/L of Sr, and 3.2 mg/L of Ni. Metal mineralization was observed by visualization with scanning electron microscopy with metal crystals of Cu, Ag, Pb, and Sr exuding from the biofilms. Following metal exposure, the mixed-species biofilms were analyzed by molecular methods and were found to maintain high levels of species complexity. A single species isolated from the community (Rhodococcus erythropolis) was used as a comparison against the mixed-community biofilm and was seen to be much less tolerant to metal stress than the community and did not biomineralize the metals.

The bacterial response to the chalcogen metalloids Se and Te.

Microbial metabolism of inorganics has been the subject of interest since the 1970s when it was recognized that bacteria are involved in the transformation of metal compounds in the environment. This area of research is generally referred to as bioinorganic chemistry or microbial biogeochemistry. Here, we overview the way the chalcogen metalloids Se and Te interact with bacteria. As a topic of considerable interest for basic and applied research, bacterial processing of tellurium and selenium oxyanions has been reviewed a few times over the past 15 years. Oddly, this is the first time these compounds have been considered together and their similarities and differences highlighted. Another aspect touched on for the first time by this review is the bacterial response in cell-cell or cell-surface aggregates (biofilms) against the metalloid oxyanions. Finally, in this review we have attempted to rationalize the considerable amount of literature available on bacterial resistance to the toxic metalloids tellurite and selenite.

Strong poison revisited.

Selenium in the form of selenocysteine plays an essential role in a number of proteins, but its role in non-enzymatic biochemistry is also important. In this short review we discuss the interactions between inorganic selenium, arsenic and mercury under physiological conditions, especially in the presence of glutathione. This chemistry is obviously important in making the arsenic and mercury unavailable for more toxic interactions, but in the process it suggests that a side-effect of chronic arsenic and/or mercury exposure is likely to be functional selenium deficiency.