Ultrasensitive 3D Stacked Silicon Nanosheet Field-Effect Transistor Biosensor with Overcoming Debye Shielding Effect for Detection of DNA.

Silicon nanowire field effect (SiNW-FET) biosensors have been successfully used in the detection of nucleic acids, proteins and other molecules owing to their advantages of ultra-high sensitivity, high specificity, and label-free and immediate response. However, the presence of the Debye shielding effect in semiconductor devices severely reduces their detection sensitivity. In this paper, a three-dimensional stacked silicon nanosheet FET (3D-SiNS-FET) biosensor was studied for the high-sensitivity detection of nucleic acids. Based on the mainstream Gate-All-Around (GAA) fenestration process, a three-dimensional stacked structure with an 8 nm cavity spacing was designed and prepared, allowing modification of probe molecules within the stacked cavities. Furthermore, the advantage of the three-dimensional space can realize the upper and lower complementary detection, which can overcome the Debye shielding effect and realize high-sensitivity Point of Care Testing (POCT) at high ionic strength. The experimental results show that the minimum detection limit for 12-base DNA (4 nM) at 1 × PBS is less than 10 zM, and at a high concentration of 1 µM DNA, the sensitivity of the 3D-SiNS-FET is approximately 10 times higher than that of the planar devices. This indicates that our device provides distinct advantages for detection, showing promise for future biosensor applications in clinical settings.

[Intelligent co-design of material, process, and equipment for manufacturing high-quality traditional Chinese medicine preparations].

In the context of Pharma 4.0, the design tools that support the pharmaceutical Quality by Design(QbD) are iterating fast toward intelligent or smart design. The conventional development methods for traditional Chinese medicine(TCM) preparations have the limitations such as over dependence on experience, low dimensions for the designed experiment parameters, poor compatibility between the process and equipment, and high trial-and-error cost during process scale-up. Therefore, this paper innovatively proposed the intelligent co-design involving material, process, and equipment for manufacturing high-quality TCM preparations, and introduced the design philosophy, targets, tools, and applications with TCM oral solid dosage(OSD) as an example. In terms of design philosophy, the pharmaceutical design tetrahedron composed of critical material attributes, critical process parameters, critical equipment attributes, and critical quality attributes was developed. The design targets were put forward based on the product performance classification system. The design tools involve a design platform that contains several modules, such a as the iTCM material database, the processing route classification system, the system modeling and simulation, and reliability-based optimization. The roles of different modules in obtaining essential and universal design knowledge of the key common manufacturing units were introduced. At last, the applications of the co-design methodology involving material, process, and equipment in the high shear wet granulation process development and the improvement of the dissolving or dispersion capability of TCM formula granules are illustrated. The research on advanced pharmaceutical design theory and methodology will help enhance the efficiency and reliability of drug development, improve the product quality, and promote the innovation of high-end TCM products across the industry.

[Manufacturing classification system for oral solid dosage forms of traditional Chinese medicines(â ¢): classification of granule dissolving behaviors].

Solubility is an important sensory quality attribute of traditional Chinese medicine(TCM) granules. In this paper, 90 batches of granules(30 batches of TCM formula granules, 30 batches of Chinese patent medicine granules and 30 batches of Japanese Kampo granules) were used as the research objects. The turbidity sensor was used to characterize the turbidity curve of the granule dissolution process. The classification system of granule dissolution behaviors was constructed from three dimensions: dissolution degree, equilibrium time, and dissolution mechanism. According to the equilibrium time, the granule dissolution rates were divided into three categories : faster(<100 s), general(101-300 s) and slow(>301 s). According to the turbidity curve profile, the granule dissolution mechanisms were classified into dissolution-controlled type(α-type), dispersion-controlled type(ß-type), and dispersion-controlled type followed by dissolution-controlled type(γ-type). The proportion of TCM formula granules, Chinese patent medicine granules and Japanese Kampo granules with complete dissolution or slight turbidity at the end of dissolution was 46.7%, 96.7%, and 10.0%. The proportion of TCM formula granules, Chinese patent medicine granules, and Japanese Kampo granules with faster dissolution rates(<100 s) was 23.3%, 26.7%, and 40.0%. The average dissolution rate of Japanese Kampo granules was faster than that of TCM formula granules, and it was slightly faster than the average dissolution rate of Chinese patent medicine granules. The dissolution mechanism of Chinese patent medicine granules was mainly α-type, while that of Japanese Kampo granules was mainly ß-type, and the three types of dissolution mechanisms of TCM formula granules accounted for a relatively average. The purpose of improving the solubility and dispersion of granules can be achieved by combining the comprehensive application of various functional excipients with the small dosage of Japanese Kampo granules and the wide addition scope of excipients. In the process of transforming TCM compound prescriptions into formulas, there is still much room for innovation in formula excipients and process optimization.

[Four critical engineering and technical problems in manufacturing measurement of traditional Chinese medicine].

Focusing on the development and quality improvement strategy of the traditional Chinese medicine(TCM) industry, the scientific and technological innovation of the new engineering of TCM should be paid attention to solve the "stuck neck" dilemma. Under the background of the ecological and industrial revolution of the scientific and technological innovation system, the super-scale information interaction and multi-dimensional integration will inevitably lead to profound changes in the manufacturing mode of TCM. Manufacturing measurement of TCM is formed on the basis of the reliability engineering theory of process control of TCM production. It is the development extension of system theory and system science ideas and a cross-fertilization discipline that combines theory with practice and adheres to the "four-oriented" re-epistemology improvement of the TCM discipline. In response to the problems of complex raw material sources, coarse process technology, unclear material basis, and poor applicability of equipment and technology in the manufacture of TCM, the transformation research mode of "aiming at the integration of pharmaceutical industry-developing intelligent production line-enabling industrial transformation" has been developed. This paper proposed the four key engineering technical problems, i.e., the identification of critical quality attributes(CQA) in the manufacture of TCM, the quality by design(QbD) and product development of the manufacturing process of TCM, the quality transfer principle and multivariate process capability index of TCM manufacturing, and the development of measurement technology and equipment of the manufacturing measurement of TCM, to achieve the systematization of quality control indicators, real-time process control, digitalization of manufacturing process, transparency of quality transfer, and intelligent whole-process control. In this paper, the new concepts, new theories, and new technologies provide a reference for the industrialization of TCM.

[Research progress and maturity assessment of continuous manufacturing of traditional Chinese medicine].

The pharmaceutical manufacturing model is gradually changing from intermittent manufacturing to continuous manufacturing and intelligent manufacturing. This paper briefly reviewed the supervision and research progress in continuous pharmaceutical manufacturing in China and abroad and described the definition and advantages of continuous pharmaceutical manufacturing. The continuous manufacturing of traditional Chinese medicine(TCM) at the current stage was summarized in the following three terms: the enhancement of the continuity of intermittent manufacturing operations, the integration of continuous equipment to improve physical continuity between units, and the application of advanced process control strategies to improve process continuity. To achieve continuous manufacturing of TCM, the corresponding key technologies, such as material property characterization, process modeling and simulation, process analysis technology, and system integration, were analyzed from the process and equipment, respectively. It was proposed that the continuous manufacturing equipment system should have the characteristics of high speed, high response, and high reliability, "three high(H~3)" for short. Considering the characteristics and current situation of TCM manufacturing, based on the two dimensions of product quality control and production efficiency, a maturity assessment model for continuous manufacturing of TCM, consisting of operation continuity, equipment continuity, process continuity, and quality control continuity, was proposed to provide references for the application of continuous manufacturing technology for TCM. The implementation of continuous manufacturing or the application of key continuous manufacturing technologies in TCM can help to systematically integrate advanced pharmaceutical technology elements and promote the uniformity of TCM quality and the improvement of production efficiency.

[Manufacturing classification system for oral solid dosage forms of traditional Chinese medicines(â ): classification of processing routes].

Oral solid dosage(OSD) occupies a key position in the market of Chinese patent medicines and new traditional Chinese medicines. Processing route is the foundation for the research and development of traditional Chinese medicine OSDs. On the basis of prescriptions and preparation methods of 1 308 traditional Chinese medicine OSDs recorded in the Chinese Pharmacopoeia, we summarized the patterns of processing routes of both modern dosage forms(tablets, granules, and capsules) and traditional dosage forms(pills and powder) and constructed a manufacturing classification system(MCS) based on the processing routes. Based on the MCS, statistical analyses were conducted respectively on medicinal materials, pharmaceutical excipients, extraction solvents in the pretreatment process, crushed medicinal materials, methods of concentration and purification, and methods of drying and granulation, aiming to uncover the process features. The results showed that each dosage form can be prepared via different routes with different processing methods of decoction pieces and raw materials for dosage preparation. The raw materials for dosage form preparation of traditional Chinese medicine OSDs included total extract, semi-extract, and total crushed powder, which accounted for different proportions. The raw materials for traditional dosage forms are mainly decoction pieces powder. Semi-extracts are the main raw materials for tablets and capsules, which account for 64.8% and 56.3%, respectively. Total extracts are the main raw materials for granules, with a proportion of 77.8%. Compared with tablets and capsules, traditional Chinese medicine granules with dissolubility requirements had a larger proportion of water extraction process, a higher proportion of refining process(34.7%), and a lower proportion of crushed medicinal mate-rials in semi-extract granules. There are four ways to add volatile oil to the modern dosage forms of traditional Chinese medicine. In addition, some new technologies and processes have been used in concentration, filtration, and granulation processes of traditional Chinese medicine OSDs, and the application of pharmaceutical excipients is diversified. The results of this study are expected to provide reference for the processing route design and upgrading of OSDs for new traditional Chinese medicines.

[Manufacturing classification system for oral solid dosage forms of traditional Chinese medicines (â ¡): classification of tablets disintegration behavior].

In this paper, 50 batches of representative traditional Chinese medicine tablets were selected and the disintegration time was examined with the method in Chinese Pharmacopoeia. The disintegration time and disintegration phenomenon were recorded, and the dissolution behaviors of water-soluble and ultraviolet-absorbent components during the disintegration process of tablets were characterized by self-control method. The results revealed that coating type and raw material type influenced the disintegration time of tablets. It was found that only 4% of traditional Chinese medicine tablets had obvious fragmentation during the disintegration process, while 96% of traditional Chinese medicine tablets showed gradual dissolution or dispersion. Furthermore, according to the disintegration speed, disintegration phenomenon, and whether the cumulative dissolution of measured components was > 90% at complete disintegration, a disintegration behavior classification system(DBCS) was created for the regular-release traditional Chinese medicine tablets. As a result, the disintegration behaviors of 50 batches of traditional Chinese medicine tablets were classified into four categories, i.e. ⅠA_2, ⅠB_1, ⅡB_1, and ⅡB_2. traditional Chinese medicine tablets(Class I) with disintegration time ≤ 30 min were defined to be rapid in disintegration, which can be the objective of optimization or improvement of Chinese herbal extract(semi extract) tablets. Different drug release models were used to fit the dissolution curve of traditional Chinese medicine tablets with gradual dissolution or dispersion phenomenon(i.e. Type B tablets). The results showed that the dissolution curves of water-soluble components in the disintegration process conformed to the zero order kinetics and the Ritger-Peppas model. It could be inferred that the disintegration mechanisms of type B tablets were a combination of dissolution controlled and swelling controlled mechanisms. This study contributes to understanding the disintegration behavior of traditional Chinese medicine tablets, and provides a reference for the design and improvement of disintegration performance of traditional Chinese medicine tablets.

[Patent application of intelligent quality control technology in traditional Chinese medicine production process: a review].

In the new stage for intelligent manufacturing of traditional Chinese medicine(TCM) from pilot demonstration to in-depth application and comprehensive promotion, how to raise the degree of intelligence for the process quality control system has become the bottleneck of the development of TCM production process control technology. This article has sorted out 226 TCM intelligent manufacturing projects that have been approved by the national and provincial governments since the implementation of the "Made in China 2025" plan and 145 related pharmaceutical enterprises. Then, the patents applied by these pharmaceutical enterprises were thoroughly retrieved, and 135 patents in terms of intelligent quality control technology in the production process were found. The technical details about intelligent quality control at both the unit levels such as cultivation, processing of crude herbs, preparation pretreatment, pharmaceutical preparations, and the production workshop level were reviewed from three aspects, i.e., intelligent quality sensing, intelligent process cognition, and intelligent process control. The results showed that intelligent quality control technologies have been preliminarily applied to the whole process of TCM production. The intelligence control of the extraction and concentration processes and the intelligent sensing of critical quality attributes are currently the focus of pharmaceutical enterprises. However, there is a lack of process cognitive patent technology for the TCM manufacturing process, which fails to meet the requirements of closed-loop integration of intelligent sensing and intelligent control technologies. It is suggested that in the future, with the help of artificial intelligence and machine learning methods, the process cognitive bottleneck of TCM production can be overcome, and the holistic quality formation mechanisms of TCM products can be elucidated. Moreover, key technologies for system integration and intelligent equipment are expected to be innovated and accelerated to enhance the quality uniformity and manufacturing reliability of TCM.

A meta-analysis of the efficacy and toxicity of tyrosine kinase inhibitors in treating patients with different types of thyroid cancer: how to choose drugs appropriately?

PURPOSE OF REVIEW: Because the high risk of death and poor prognosis of patients with refractory thyroid cancer (TC), studies related to tyrosine kinase inhibitors (TKIs) in treating different types of refractory TC have gradually attracted attention. Thus, we conducted a meta-analysis of published randomized controlled trials and single-arm trials to evaluate tyrosine kinase inhibitors' efficacy and safety profile treatment in TC patients. RECENT FINDINGS: The studies of 29 in 287 met the criteria, 9 were randomized controlled trials and 20 were single-arm trials, involving 11 TKIs (Apatinib, Anlotinib, Cabozantinib, Imatinib, Lenvatinib, Motesanib, Pazopanib, Sorafenib, Sunitinib, Vandetanib, Vemurafenib). Treatment with TKIs significantly improved progression-free survival [hazard ratio [HR] 0.34 (95% confidence interval [CI]: 0.24, 0.48), P < 0.00001] and overall survival [OS] [HR 0.76, (95% CI: 0.64, 0.91), P = 0.003] in randomized controlled trials, but adverse events (AEs) were higher than those in the control group (P < 0.00001). The result of the objective response rate (ORR) in single-arm trials was statistically significant [odds ratio [OR] 0.49 (95% CI: 0.32, 0.75), P = 0.001]. SUMMARY: TKIs significantly prolonged progression-free survival and OS or improved ORR in patients with different types of TC (P < 0.01). Our recommendation is to select appropriate TKIs to treat different types of TC patients, and to prevent and manage drug-related AEs after using TKIs.

Guanxin Danshen Dripping Pills Improve Quality of Life and Cardiovascular Prognoses of CHD Patients after PCI with Anxiety or Depression (GLAD Study): A Randomized Double-Blind Placebo-Controlled Study / 中国结合医学杂志

OBJECTIVE@#To assess the efficacy and safety of Guanxin Danshen Dripping Pills (GXDS) in the treatment of depression or anxiety in patients with coronary heart disease (CHD) after percutaneous coronary intervention (PCI).@*METHODS@#From September 2017 to June 2019, 200 CHD patients after PCI with depression and anxiety were included and randomly divided into GXDS (100 cases) and placebo control groups (100 cases) by block randomization and a random number table. Patients in the GXDS and control groups were given GXDS and placebo, respectively, 0.4 g each time, 3 times daily for 12 weeks. The primary outcomes were scores of Patient Health Questionnaire-9 (PHQ-9), Generalized Anxiety Scale (GAD-7) and the Seattle Angina Pectoris Scale (SAQ). The secondary outcomes included 12 Health Survey Summary Form (SF-12) scores and the first onset time and incidence of major adverse cardiovascular events (MACEs). Other indices including blood pressure, blood lipids, microcirculation and inflammatory-related indices, etc. were monitored at baseline, week 4, and week 12.@*RESULTS@#In the full analysis set (200 cases), after treatment, the PHQ-9 and GAD-7 scores in the GXDS group were considerably lower than those in the control group (P<0.05). Compared with the baseline, the total PHQ-9 scores of the experimental and control groups decreased by 3.97 and 1.18, respectively. The corrected mean difference between the two groups was -2.78 (95% CI: -3.47, -2.10; P<0.001). The total GAD-7 score in the GXDS group decreased by 3.48% compared with the baseline level, while that of the placebo group decreased by 1.13%. The corrected mean difference between the two groups was -2.35 (95% CI: -2.95, -1.76; P<0.001). The degree of improvement in SAQ score, SF-12 score, endothelin and high-sensitive C-reactive protein levels in the GXDS group were substantially superior than those in the placebo group, and the differences between the two groups were statistically significant (P<0.05). Similar results were obtained in the per protocol population analysis of 177 patients. Three cases of MACES were reported in this study (1 in the GXDS group and 2 in the placebo group), and no serious adverse events occurred.@*CONCLUSIONS@#GXDS can significantly alleviate depression and anxiety, relieve symptoms of angina, and improve quality of life in patients with CHD after PCI. (Registration No. ChiCTR1800014291).

Patent application of intelligent quality control technology in traditional Chinese medicine production process: a review / 中国中药杂志

In the new stage for intelligent manufacturing of traditional Chinese medicine(TCM) from pilot demonstration to in-depth application and comprehensive promotion, how to raise the degree of intelligence for the process quality control system has become the bottleneck of the development of TCM production process control technology. This article has sorted out 226 TCM intelligent manufacturing projects that have been approved by the national and provincial governments since the implementation of the "Made in China 2025" plan and 145 related pharmaceutical enterprises. Then, the patents applied by these pharmaceutical enterprises were thoroughly retrieved, and 135 patents in terms of intelligent quality control technology in the production process were found. The technical details about intelligent quality control at both the unit levels such as cultivation, processing of crude herbs, preparation pretreatment, pharmaceutical preparations, and the production workshop level were reviewed from three aspects, i.e., intelligent quality sensing, intelligent process cognition, and intelligent process control. The results showed that intelligent quality control technologies have been preliminarily applied to the whole process of TCM production. The intelligence control of the extraction and concentration processes and the intelligent sensing of critical quality attributes are currently the focus of pharmaceutical enterprises. However, there is a lack of process cognitive patent technology for the TCM manufacturing process, which fails to meet the requirements of closed-loop integration of intelligent sensing and intelligent control technologies. It is suggested that in the future, with the help of artificial intelligence and machine learning methods, the process cognitive bottleneck of TCM production can be overcome, and the holistic quality formation mechanisms of TCM products can be elucidated. Moreover, key technologies for system integration and intelligent equipment are expected to be innovated and accelerated to enhance the quality uniformity and manufacturing reliability of TCM.

Manufacturing classification system for oral solid dosage forms of traditional Chinese medicines (Ⅱ): classification of tablets disintegration behavior / 中国中药杂志

In this paper, 50 batches of representative traditional Chinese medicine tablets were selected and the disintegration time was examined with the method in Chinese Pharmacopoeia. The disintegration time and disintegration phenomenon were recorded, and the dissolution behaviors of water-soluble and ultraviolet-absorbent components during the disintegration process of tablets were characterized by self-control method. The results revealed that coating type and raw material type influenced the disintegration time of tablets. It was found that only 4% of traditional Chinese medicine tablets had obvious fragmentation during the disintegration process, while 96% of traditional Chinese medicine tablets showed gradual dissolution or dispersion. Furthermore, according to the disintegration speed, disintegration phenomenon, and whether the cumulative dissolution of measured components was > 90% at complete disintegration, a disintegration behavior classification system(DBCS) was created for the regular-release traditional Chinese medicine tablets. As a result, the disintegration behaviors of 50 batches of traditional Chinese medicine tablets were classified into four categories, i.e. ⅠA_2, ⅠB_1, ⅡB_1, and ⅡB_2. traditional Chinese medicine tablets(Class I) with disintegration time ≤ 30 min were defined to be rapid in disintegration, which can be the objective of optimization or improvement of Chinese herbal extract(semi extract) tablets. Different drug release models were used to fit the dissolution curve of traditional Chinese medicine tablets with gradual dissolution or dispersion phenomenon(i.e. Type B tablets). The results showed that the dissolution curves of water-soluble components in the disintegration process conformed to the zero order kinetics and the Ritger-Peppas model. It could be inferred that the disintegration mechanisms of type B tablets were a combination of dissolution controlled and swelling controlled mechanisms. This study contributes to understanding the disintegration behavior of traditional Chinese medicine tablets, and provides a reference for the design and improvement of disintegration performance of traditional Chinese medicine tablets.

Manufacturing classification system for oral solid dosage forms of traditional Chinese medicines(Ⅰ): classification of processing routes / 中国中药杂志

Oral solid dosage(OSD) occupies a key position in the market of Chinese patent medicines and new traditional Chinese medicines. Processing route is the foundation for the research and development of traditional Chinese medicine OSDs. On the basis of prescriptions and preparation methods of 1 308 traditional Chinese medicine OSDs recorded in the Chinese Pharmacopoeia, we summarized the patterns of processing routes of both modern dosage forms(tablets, granules, and capsules) and traditional dosage forms(pills and powder) and constructed a manufacturing classification system(MCS) based on the processing routes. Based on the MCS, statistical analyses were conducted respectively on medicinal materials, pharmaceutical excipients, extraction solvents in the pretreatment process, crushed medicinal materials, methods of concentration and purification, and methods of drying and granulation, aiming to uncover the process features. The results showed that each dosage form can be prepared via different routes with different processing methods of decoction pieces and raw materials for dosage preparation. The raw materials for dosage form preparation of traditional Chinese medicine OSDs included total extract, semi-extract, and total crushed powder, which accounted for different proportions. The raw materials for traditional dosage forms are mainly decoction pieces powder. Semi-extracts are the main raw materials for tablets and capsules, which account for 64.8% and 56.3%, respectively. Total extracts are the main raw materials for granules, with a proportion of 77.8%. Compared with tablets and capsules, traditional Chinese medicine granules with dissolubility requirements had a larger proportion of water extraction process, a higher proportion of refining process(34.7%), and a lower proportion of crushed medicinal mate-rials in semi-extract granules. There are four ways to add volatile oil to the modern dosage forms of traditional Chinese medicine. In addition, some new technologies and processes have been used in concentration, filtration, and granulation processes of traditional Chinese medicine OSDs, and the application of pharmaceutical excipients is diversified. The results of this study are expected to provide reference for the processing route design and upgrading of OSDs for new traditional Chinese medicines.

Research progress and maturity assessment of continuous manufacturing of traditional Chinese medicine / 中国中药杂志

The pharmaceutical manufacturing model is gradually changing from intermittent manufacturing to continuous manufacturing and intelligent manufacturing. This paper briefly reviewed the supervision and research progress in continuous pharmaceutical manufacturing in China and abroad and described the definition and advantages of continuous pharmaceutical manufacturing. The continuous manufacturing of traditional Chinese medicine(TCM) at the current stage was summarized in the following three terms: the enhancement of the continuity of intermittent manufacturing operations, the integration of continuous equipment to improve physical continuity between units, and the application of advanced process control strategies to improve process continuity. To achieve continuous manufacturing of TCM, the corresponding key technologies, such as material property characterization, process modeling and simulation, process analysis technology, and system integration, were analyzed from the process and equipment, respectively. It was proposed that the continuous manufacturing equipment system should have the characteristics of high speed, high response, and high reliability, "three high(H~3)" for short. Considering the characteristics and current situation of TCM manufacturing, based on the two dimensions of product quality control and production efficiency, a maturity assessment model for continuous manufacturing of TCM, consisting of operation continuity, equipment continuity, process continuity, and quality control continuity, was proposed to provide references for the application of continuous manufacturing technology for TCM. The implementation of continuous manufacturing or the application of key continuous manufacturing technologies in TCM can help to systematically integrate advanced pharmaceutical technology elements and promote the uniformity of TCM quality and the improvement of production efficiency.

Four critical engineering and technical problems in manufacturing measurement of traditional Chinese medicine / 中国中药杂志

Focusing on the development and quality improvement strategy of the traditional Chinese medicine(TCM) industry, the scientific and technological innovation of the new engineering of TCM should be paid attention to solve the "stuck neck" dilemma. Under the background of the ecological and industrial revolution of the scientific and technological innovation system, the super-scale information interaction and multi-dimensional integration will inevitably lead to profound changes in the manufacturing mode of TCM. Manufacturing measurement of TCM is formed on the basis of the reliability engineering theory of process control of TCM production. It is the development extension of system theory and system science ideas and a cross-fertilization discipline that combines theory with practice and adheres to the "four-oriented" re-epistemology improvement of the TCM discipline. In response to the problems of complex raw material sources, coarse process technology, unclear material basis, and poor applicability of equipment and technology in the manufacture of TCM, the transformation research mode of "aiming at the integration of pharmaceutical industry-developing intelligent production line-enabling industrial transformation" has been developed. This paper proposed the four key engineering technical problems, i.e., the identification of critical quality attributes(CQA) in the manufacture of TCM, the quality by design(QbD) and product development of the manufacturing process of TCM, the quality transfer principle and multivariate process capability index of TCM manufacturing, and the development of measurement technology and equipment of the manufacturing measurement of TCM, to achieve the systematization of quality control indicators, real-time process control, digitalization of manufacturing process, transparency of quality transfer, and intelligent whole-process control. In this paper, the new concepts, new theories, and new technologies provide a reference for the industrialization of TCM.

The 499th case: Roux-en-Y gastric bypass, limb weakness, and ostealgia / 中华内科杂志

A 36-year-old woman was admitted to the Peking Union Medical College Hospital with a history of fractures for 2 years, limb weakness for 1 year, and ostealgia for 2 months. The patient's examination identified iron deficiency anemia, significantly decreased serum calcium and 25-hydroxyvitamin D3 levels, and increased alkaline phosphatase and parathyroid hormone levels. Imaging showed several typical signs of osteomalacia. Considering the history of Roux-en-Y gastric bypass surgery, the diagnosis was considered to be osteomalacia caused by a postoperative nutritional absorption disorder. The patient was supplemented with calcitriol, calcium, and vitamin D and gradually returned to normal physical activity. The bone metabolism indicators and bone density were significantly improved.

[Effects of the removal of invasive Moso bamboo on soil microbial biomass and enzyme activities in subtropical forests]. / å ¥ä¾µæ¯›ç«¹çš†ä¼å¯¹äºšçƒ­å¸¦æ£®æž—åœŸå£¤å¾®ç”Ÿç‰©ç”Ÿç‰©é‡å’Œé ¶æ´»æ€§çš„å½±å“.

Removal of invasive plant species is the first step to restoring the invaded ecosystems. The soil microbial biomass and extracellular enzyme activities were measured in Moso bamboo (Phyllostachys edulis) pure forest (completely invasion), invasive P. edulis removal forest (secondary succession 5 years after clear cutting), and the evergreen broadleaved forest (no invasion) in Tianmu Mountain. The results showed that compared with P. edulis pure forest, invasive P. edulis removal significantly increased the contents of soil organic carbon (SOC), nitrate nitrogen, available phosphorus and potassium, as well as microbial biomass carbon (MBC) and microbial biomass phosphorus (MBP), while significantly decreased microbial biomass nitrogen (MBN). The activities of α-glucosidase (AG), ß-glucosidase (BG), leucine aminopeptidase (LAP) and phenol oxidase (POX) in the forest with removal of invasive P. edulis were significantly higher than those in P. edulis pure forest, while invasive P. edulis removal did not change the activities of cellodisaccharide hydrolase (CBH), ß-N-acetyl-glucosaminopeptidase (NAG), acid phosphatase (ACP) and peroxidase (PER). Furthermore, the activities of AG, BG and LAP were positively correlated with SOC and MBC, while the increase in POX activity was positively correlated with soil nitrate content. In addition, MBC, MBN and MBP, and activities of AG, BG, NAG, LAP and ACP in P. edulis removal forest forest were significantly higher than those in evergreen broadleaved forests. Taken together, the removal of invasive P. edulis could increase soil nutrient contents, microbial biomass and extracellular enzyme activities, thus could be considered as an effective way to restore the invaded forests. Our results provide important theoretical basis for controlling P. edulis invasion in subtropical forests.

[Electroacupuncture postpones growth of tumors by activating SIRT1 expression to reduce inflammatory reaction and facilitate cellular autophagy in mice with transformed colorectal carcinomas].

OBJECTIVE: To observe the effect of electroacupuncture (EA) on tumor number, body conditions, inflammatory factors and expression levels of silent information regulator 1 (sirtuin 1, SIRT1) and autophagy-related proteins Beclin-1, P62, and LC3 in colorectal tissues in inflammatory-transformed colorectal cancer mice, so as to explore its underlying mechanisms in resisting tumor growth. METHODS: A total of 100 C57BL/6 male mice were randomly divided into normal control, model, EA, EA + SIRT1 inhibitor (EA+inhibitor) and agonist resveratrol (agonist) groups, with 20 mice in each group. EA (2 Hz, 1 mA) was applied to "Zusanli"(ST36)and "Fenglong"(ST40) for 20 min every time, 3 times a week for 11 weeks. Mice of the EA +inhibitor group received intraperitoneal injection of SIRT1 inhibitor EX527 (5 mg/kg) at the same time of EA treatment, and those of the agonist group received gavage of resveratrol (200 mg/kg, an agonist of SIRT1), 3 times a week for 11 weeks. The body mass was measured weekly. The disease activity index (DAI), colorectal length and tumor number in each group were recorded. The histopathological changes of colorectal tissues were observed by H.E. staining; the contents of interleukin 6 (IL-6), IL-10, IL-17, in the colorectal tissues were detected by enzyme-linked immunosorbent assay, and the expression levels of SITR1, Beclin-1, P62, and LC3 in colorectal tissues were detected by Western blot and real-time fluorescence quantitative PCR, respectively. RESULTS: Compared with the normal control group, the body weight, length of colorectum, the contents of IL-10, and the expression levels of SIRT1,Beclin-1 and LC3 mRNAs and proteins were significantly decreased (P<0.001), whereas the DAI score, the number of tumors, the contents of IL-6 and IL-17, and the expression levels of P62 mRNA and protein were significantly increased (P<0.000 1, P<0.001) in the model group. In comparison with the model group, the body weight, the length of colorectum, the contents of IL-10, and the expression levels of SIRT1,Beclin-1 and LC3 mRNAs and proteins were significantly increased (P<0.01,P<0.05,P<0.001), while the DAI scores, the numbers of tumors, the contents of IL-6 and IL-17, and the expression levels of P62 mRNA and protein were obviously decreased in the EA and agonist groups (P<0.01,P<0.05, P<0.001). No significant changes were found in all the above-mentioned indexes in the EA+inhibitor group in comparison with the model group (P>0.05). CONCLUSION: EA can reduce the number of tumors and inflammation reaction in colorectal tissue and improve the body condition in mice with colorectal cancer, which may be related to its functions in activating the expression of intestinal SIRT1, and then facilitating cellular autophagy.

[Material manufacturability classification in high shear wet granulation process of Chinese medicine].

The high shear wet granulation(HSWG) process of Chinese medicine has a complicated mechanism. There are many influencing factors that contribute to this process. In order to summarize the manufacturability of different kinds of materials in HSWG, this paper constructed a material library composed of 11 materials, including 4 Chinese medicine extracts and 7 pharmaceutical excipients. Each material was described by 22 physical parameters. Several binders were employed, and their density, viscosity and surface tension were characterized. Combining empirical constraints and the principle of randomization, 21 designed experiments and 8 verification experiments were arranged. The partial least squares(PLS) algorithm was used to establish a process model in prediction of the median granule size based on properties of raw materials and binders, and process parameters. The surface tension and density of binders, as well as the maximum pore saturation were identified as key variables. In the latent variable space of the HSWG process model, all materials could be divided into three categories, namely the Chinese medicine extracts, the diluents and the disintegrants. The granulation of Chinese medicine extracts required low viscosity and low amount of binder, and the resulted granule sizes were small. The diluent powders occupied a large physical space, and could be made into granules with different granule sizes by adjusting the properties of binders. The disintegrants tended to be made into large granules under the condition of aqueous binder. The combination use of material database and multivariate modeling method is conducive to innovate the knowledge discovery of the wet granulation process of Chinese medicine, and provides a basis for the formulation and process design based on material attributes.

Expert Consensus on Otorhinolaryngology Head and Neck Diseases Responding Specifically to Traditional Chinese Medicine / 中国实验方剂学杂志

Traditional Chinese medicine （TCM） and western medicine have their respective advantages and limitations in the diagnosis and treatment of common otorhinolaryngology head and neck diseases. Although the integrated TCM and western medicine exhibits definite curative effects， there is no consensus on the otorhinolaryngology head and neck diseases responding specifically to TCM or integrated TCM and western medicine， as well as the diagnosis and treatment schemes. The China Association of Chinese Medicine （CACM） thus organized the otorhinolaryngology head and neck specialists of both TCM and western medicine to discuss the etiology， pathogenesis， and clinical diagnosis and treatment methods of common otorhinolaryngology head and neck diseases with the results of multiple clinical trials taken into account. The acute pharyngitis， chronic pharyngolaryngitis， paraesthesia pharyngis， hysterical aphasia， allergic rhinitis， subjective tinnitus， and otogenic vertigo were confirmed to respond specifically to TCM or integrated TCM and western medicine. Then a mutually agreed diagnosis and treatment scheme and recommendation with integrated TCM and western medicine was formulated as a reference for clinical practice， thus benefiting more patients.