Cyanobacterial blooms control with CaO2 in different stages: Inhibition efficiency, water quality optimization and microbial community changes.

This study explored the feasibility of calcium peroxide (CaO2) to inhibit cyanobacterial blooms of the outbreak and dormancy stages. Our previous studies have found that CaO2 has a high inhibitory effect on cyanobacteria. In order to explore the application effect of CaO2 in actual cyanobacteria lake water, we conducted this study to clarify the effect of CaO2 on inhibiting cyanobacteria in outbreak and dormancy stages. The results showed that CaO2 inhibited the growth of cyanobacteria in the outbreak and dormancy stages by 98.7% and 97.6%, respectively. The main inhibitory mechanism is: (1) destroy the cell structure and make the cells undergo programmed cell death by stimulating the oxidation balance of cyanobacteria cells; (2) EPS released by cyanobacteria resist stimulation and combine calcium to form colonies, and accelerate cell settlement. In addition to causing direct damage to cyanobacteria, CaO2 can also improve water quality and sediment microbial diversity, and reduce the release of sediment to phosphorus, so as to further contribute to cyanobacterial inhibition. Finally, the results of qRT-PCR analysis confirmed the promoting effect of CaO2 on the downregulation of photosynthesis-related genes (rbcL and psaB), microcystn (mcyA and mcyD) and peroxiredoxin (prx), and verified the mechanism of CaO2 inhibition of cyanobacteria. In conclusion, this study provides new findings for the future suppression of cyanobacterial bloom, by combining water quality, cyanobacterial inhibition mechanisms, and sediment microbial diversity.

[Preparation of Iron-improved Blue Algae Biochar and Its Co-adsorption Mechanism for Phosphorus in Surface Water].

To alleviate the problems of eutrophication and blue algae accumulation in water, biochar was prepared from blue algae dehydrated using polymerized ferrous sulfate(PFS) to absorb phosphate in water, and the biochar was activated using steam to adjust the pore structure. The preparation conditions of blue algae biochar were optimized using the response surface method. The optimal results were as follows:the dosage of PFS was 458 mg·L-1, the carbonization temperature was 433℃, and the mass ratio of biochar precursor to steam was 1:11. Biochar without PFS(F0H11-433) and biochar with PFS(F458H11-433) were characterized using X-ray diffraction(XRD), Fourier-transform infrared spectroscopy(FTIR), zeta potential, and Raman spectra(Raman) were used to study whether blue algae biochar and PFS had a synergic effect on phosphate removal. The results showed that:compared with F0H11-433, iron oxide appeared on the surface, the zero point of charge(pHpzc) increased from 4.41 to 6.19, and the disorder and defect degree of biochar was increased in F458H11-433. The pseudo-second-order model and Langmuir model were suitable for describing the adsorption process of F458H11-433, and the saturated adsorption capacity was 31.97 mg·g-1. F458H11-433 had excellent phosphorus removal efficiency in actual lake water, and the residual phosphate content of effluent was less than 0.025 mg·L-1. In the presence of several common anions, it still showed excellent selective adsorption. After five cycles, the phosphate removal of F458H11-433 still reached 75.78%, indicating that F458H11-433 had the characteristic of being renewable. Combined with the material characterization results before and after adsorption, the phosphorus removal mechanism of F458H11-433 mainly involved electrostatic attraction and ligand exchange.

Bioconversion of cyanobacteria by black soldier fly larvae (Hermetia illucens L.): Enhancement by antioxidants.

Cyanobacterial blooms have been a global environmental problem for decades. Bioconversion by black soldier fly larvae (BSFL) has been widely reported to be a clean and efficient method to remove organic pollutants. In this study, BSFL bioconversion was used to treat cyanobacterial blooms. Antioxidants (a mixture of l-ascorbic acid [180 mg/kg fresh feed] and α-tocopherol [360 mg/kg fresh feed]) were added to compare bioconversion performance against a non-supplemented group. With increasing proportions of cyanobacteria (0%-25% dry mass), the bioconversion efficiency of the antioxidant group improved significantly compared to the control group, and the survival rate of larvae rose from 96.50-45.50% to 98.00-55.83% with antioxidant addition. The toxic effects of exogenous anti-nutrients could be reduced by the antioxidants through inactivation of trypsin inhibitor and enhancement of the microcystin-LR degradation rate. Overall, the BSFL bioremediation capacity was improved with addition of exogenous antioxidants, verifying both the effects and mechanism of antioxidant addition in promoting the bioconversion of cyanobacteria by BSFL and providing a basis for future application and study.

Enhanced phosphorus and ciprofloxacin removal in a modified BAF system by configuring Fe-C micro electrolysis: Investigation on pollutants removal and degradation mechanisms.

A modified biological aerated filter (BAF) system configured Fe-C micro electrolysis was applied to enhance phosphorus and ciprofloxacin (CIP) removal. A novel sludge ceramic and sintering ferric-carbon ceramic (SFC) were separately packed into a lab-scale BAF and Fe-C micro electrolysis reactor. The BAF and Fe-C micro electrolysis coupled system was operated about 230days. The enhancement of phosphorus and ciprofloxacin removals by Fe-C micro electrolysis, the degradation mechanisms of CIP and the variations of microbial population were investigated. The removal efficiencies of chemical oxygen demand (CODcr), ammonia (NH4-N), total phosphorus (TP) and CIP reached about 95%, 95%, 80% and 85% in the combined process, respectively. Configuring Fe-C micro electrolysis significantly enhanced phosphorus and CIP removal, whereas had no promotion on N removal. Four main degradation pathways were proposed according to the LC-MS analysis. More than 12 degradation products were detected through the treatment of Fe-C micro electrolysis and only 3 biodegraded products with low concentration were identified in BAF effluent. The high-throughput sequencing analysis showed that the microbial community changed a lot under CIP pressure. The relative abundance of Sphingomonadaceae, Xanthomonadaceae, Bradyrhizobium, Helicobacter and Pseudomonas increased with CIP influent. This study provides a promising process in CIP wastewater treatment.