Sustainable Alternatives to Petroleum-Derived Excipients in Pharmaceutical Oil-in-Water Creams.

Recently, vast efforts towards sustainability have been made in the pharmaceutical industry. In conventional oil-in-water (O/W) cream formulations, various petroleum-based excipients, namely mineral oil and petrolatum, are commonly used. Natural or synthetic excipients, derived from vegetable sources, were explored as alternatives to petroleum-based excipients in prototype topical creams, with 1% (w/w) lidocaine. A conventional cream comprised of petroleum-derived excipients was compared to creams containing sustainable excipients in terms of key quality and performance attributes, physicochemical properties, and formulation performance. The petrolatum-based control formulation had the highest viscosity of 248.0 Pa·s, a melting point of 42.7°C, a low separation index at 25°C of 0.031, and an IVRT flux of 52.9 µg/cm2/h. Formulation SUS-4 was the least viscous formulation at 86.9 Pa·s, had the lowest melting point of 33.6°C, the highest separation index of 0.120, and the highest IVRT flux of 139.4 µg/cm2/h. Alternatively, SUS-5 had a higher viscosity of 131.3 Pa·s, a melting point of 43.6°C, a low separation index of 0.046, and the lowest IVRT flux of 25.2 µg/cm2/h. The cumulative drug permeation after 12 h from SUS-4, SUS-5, and the control were 126.2 µg/cm2, 113.8 µg/cm2, and 108.1 µg/cm2, respectively. The composition of the oil-in-water creams had influence on physicochemical properties and drug release; however, skin permeation was not impacted. Sustainable natural or synthetic excipients in topical cream formulations were found to be suitable alternatives to petroleum-based excipients with comparable key quality attributes and performance attributes and should be considered during formulation development.

Potential and Progress of 2D Materials in Photomedicine for Cancer Treatment.

Over the last decades, photomedicine has made a significant impact and progress in treating superficial cancer. With tremendous efforts many of the technologies have entered clinical trials. Photothermal agents (PTAs) have been considered as emerging candidates for accelerating the outcome from photomedicine based cancer treatment. Besides various inorganic and organic candidates, 2D materials such as graphene, boron nitride, and molybdenum disulfide have shown significant potential for photothermal therapy (PTT). The properties such as high surface area to volume, biocompatibility, stability in physiological media, ease of synthesis and functionalization, and high photothermal conversion efficiency have made 2D nanomaterials wonderful candidates for PTT to treat cancer. The targeting or localized activation could be achieved when PTT is combined with chemotherapies, immunotherapies, or photodynamic therapy (PDT) to provide better outcomes with fewer side effects. Though significant development has been made in the field of phototherapeutic drugs, several challenges have restricted the use of PTT in clinical use and hence they have not yet been tested in large clinical trials. In this review, we attempted to discuss the progress, properties, applications, and challenges of 2D materials in the field of PTT and their application in photomedicine.