RESUMO
Nitrogen and phosphorus contamination in wastewater is a serious environmental concern and poses a global threat to sustainable development. In this paper, a comprehensive review of the studies on simultaneous nitrogen and phosphorus removal (SNPR) during 1986-2022 (538 publications) was conducted using bibliometrics, which showed that simultaneous nitrification, denitrification, and phosphorus removal (SNDPR) is the most promising process. To better understand SNDPR, the dissolved oxygen, carbon to nitrogen ratio, carbon source type, sludge retention time, Cu2+ and Fe3+, pH, salinity, electron acceptor type of denitrifying phosphorus-accumulating organisms (DPAOs), temperature, and other influencing factors were analyzed. Currently, SNDPR has been successfully implemented in activated sludge systems, aerobic granular sludge systems, biofilm systems, and constructed wetlands; sequential batch mode of operation is a common means to achieve this process. SNDPR exhibits a significant potential for phosphorus recovery. Future research needs to focus on: (1) balancing the competitiveness between denitrifying glycogen-accumulating organisms (DGAOs) and DPAOs, and countermeasures to deal with the effects of adverse conditions on SNDPR performance; (2) achieving SNDPR in continuous flow operation; and (3) maximizing the recovery of P during SNDPR to achieve resource sustainability. Overall, this study provides systematic and valuable information for deeper insights into SNDPR, which can help in further research.
Assuntos
Nitrificação , Fósforo , Esgotos , Desnitrificação , Eliminação de Resíduos Líquidos , Reatores Biológicos , Nitrogênio , CarbonoRESUMO
Lattice structures are a group of cellular materials composed of regular repeating unit cells. Due to their extraordinary mechanical properties, such as specific mechanical strength, ultra-low density, negative Poisson's ratio, etc., lattice structures have been widely applied in the fields of aviation and aerospace, medical devices, architecture, and automobiles. Hybrid additive manufacturing (HAM), an integrated manufacturing technology of 3D printing processes and other complementary processes, is becoming a competent candidate for conveniently delivering lattice structures with multifunctionalities, not just mechanical aspects. This work proposes a HAM technology that combines vat photopolymerization (VPP) and electroless plating process to fabricate smart metal-coated lattice structures. VPP 3D printing process is applied to create a highly precise polymer lattice structure, and thereafter electroless plating is conducted to deposit a thin layer of metal, which could be used as a resistive sensor for monitoring the mechanical loading on the structure. Ni-P layer and copper layer were successfully obtained with the resistivity of 8.2×10-7Ωâ m and 2.0 ×10-8 Ωâ m, respectively. Smart lattice structures with force-loading self-sensing functionality are fabricated to prove the feasibility of this HAM technology for fabricating multifunctional polymer-metal lattice composites.
RESUMO
A carbon nanotube (CNT)-polydimethylsiloxane (PDMS) composite electrode was developed for the capillary electrophoretic determination of the bioactive constituents in Rhizoma Chuanxiong, a traditional Chinese medicine. The novel composite electrode was fabricated on the basis of the in situ polyaddition of curing agent-containing dimethyl siloxane oligomer in the presence of CNTs in the inner bore of a piece of fused silica capillary under heat. It was coupled with capillary electrophoresis for the separation and detection of vanillin, ferulic acid, vanillic acid, caffeic acid, and protocatechuic acid in Rhizoma Chuanxiong to demonstrate its feasibility and performance. The five phenolic constituents were well separated within 13min in a 45cm long capillary at a separation voltage of 15kV using a 50mM borate buffer (pH 9.2). The CNT-based detector offered higher sensitivity, significantly lower operating potential, satisfactory reproducibility, and lower expense of operation, indicating great promise for a wide range of analytical applications.
Assuntos
Química Farmacêutica/métodos , Dimetilpolisiloxanos/química , Medicamentos de Ervas Chinesas/análise , Nanotubos de Carbono/química , Rizoma , Eletroforese Capilar/métodos , Raízes de PlantasRESUMO
This report describes the fabrication and the application of a novel carbon nanotube (CNT)-epoxy composite electrode as a sensitive amperometric detector for the capillary electrophoresis (CE). The composite electrode was fabricated on the basis of the in situ polycondensation of a mixture of CNTs and 1,2-ethanediamine-containing bisphenol A epoxy resin in the inner bore of a piece of fused silica capillary under heat. It was coupled with CE for the separation and detection of arbutin and bergenin in Bergeniae Rhizoma, a traditional Chinese medicine, to demonstrate its feasibility and performance. The two phenolic constituents were well separated within 10min in a 45cm capillary length at a separation voltage of 12kV using a 50mM borate buffer (pH 9.2). The CNT-based detector offered higher sensitivity, significantly lower operating potential, satisfactory resistance to surface fouling, and lower expense of operation, indicating great promise for a wide range of analytical applications. It showed long-term stability and reproducibility with relative standard deviations of less than 5% for the peak current (n=15).
Assuntos
Arbutina/análise , Benzopiranos/imunologia , Eletrodos , Eletroforese Capilar/instrumentação , Resinas Epóxi/química , Nanotubos de Carbono/química , Extratos Vegetais/análise , Saxifragaceae/química , Compostos Benzidrílicos/química , Soluções Tampão , Eletroforese Capilar/normas , Desenho de Equipamento , Etilenodiaminas/química , Estudos de Viabilidade , Concentração de Íons de Hidrogênio , Limite de Detecção , Modelos Lineares , Fenóis/química , Raízes de Plantas , Reprodutibilidade dos Testes , Propriedades de SuperfícieRESUMO
This report describes the development and application of a novel graphene-epoxy composite electrode as a sensitive amperometric detector of capillary electrophoresis. The composite electrode was fabricated on the basis of the in situ polycondensation of a mixture of graphene and 1,2-ethanediamine-containing bisphenol A epoxy resin in the inner bore of a piece of fused silica capillary under heat. The structure of the material was investigated by scanning electron microscopy, thermogravimetric analysis, X-ray diffraction, and Fourier transform infrared spectroscopy. The results indicated that graphene sheets were well dispersed and interconnected throughout the composite to form an electrically conductive network. The performance of this unique electrode was demonstrated by separating and detecting two naturally occurring phenolic compounds in rosemary in combination with capillary electrophoresis. The graphene-based detector offered significantly lower operating potentials, higher sensitivity, satisfactory resistance to surface fouling, and lower expense of operation, indicating great promise for a wide range of applications.
Assuntos
Eletroforese Capilar/instrumentação , Resinas Epóxi/química , Grafite/química , Abietanos/análise , Abietanos/isolamento & purificação , Eletrodos , Eletroforese Capilar/métodos , Modelos Químicos , Extratos Vegetais/análise , Extratos Vegetais/química , Extratos Vegetais/isolamento & purificação , Rosmarinus/químicaRESUMO
In this report, a graphene/poly(ethylene-co-vinyl acetate) composite electrode was fabricated by melt compounding for the amperometric detection of capillary electrophoresis. The composite electrode was fabricated by packing a mixture of graphene and melted poly(ethylene-co-vinyl acetate) in a piece of fused silica capillary under heat. The structure of the composite was investigated by scanning electron microscopy and Fourier transform infrared spectroscopy. The results indicated that graphene sheets were well dispersed in the composite to form an interconnected conducting network. The performance of this unique graphene-based detector has been demonstrated by separating and detecting rutin, quercitrin, kaempferol, and quercetin in Cacumen platycladi in combination with capillary electrophoresis. The four flavones have been well separated within 9 min in a 50-cm-long capillary at a separation voltage of 12 kV using a 50 mM sodium borate buffer (pH 9.2). The graphene-based detector offered significantly lower operating potentials, substantially enhanced signal-to-noise characteristics, lower expense of operation, high resistance to surface fouling, and enhanced stability. It showed long-term stability and repeatability with relative standard deviations of <5% for the peak current (n = 15).
Assuntos
Cupressaceae/química , Medicamentos de Ervas Chinesas/análise , Eletroforese Capilar/métodos , Flavonas/análise , Eletrodos , Eletroforese Capilar/instrumentação , Grafite/química , Folhas de Planta/química , Polivinil/químicaRESUMO
A method based on micellar electrokinetic chromatography with amperometric detection and far infrared-assisted extraction has been developed for the simultaneous determination of two flavones (rutin and farrerol) and three phenolic acids (syringic acid, vanillic acid, and 4-hydroxybenzoic acid) in the dried leaves of Rhododendron mucronulatum Turcz., a commonly used traditional Chinese medicine. The effects of some important factors such as the voltage applied on the infrared generator, irradiation time, the concentration of borate and sodium dodecylsulfate (SDS), separation voltage, and detection potential were investigated to acquire the optimum conditions. The detection electrode was a 300-µm diameter carbon disc electrode. The five analytes could be well separated within 8 min in a 40 cm-long capillary at a separation voltage of 12 kV in a 50 mM borate buffer (pH 9.2) containing 50 mM SDS. The relationship between peak current and analyte concentration was linear over about three orders of magnitude with the detection limits (S/N=3) ranging from 0.20 to 0.46 µM. The results indicated that far infrared irradiations significantly enhanced the extraction efficiency. The extraction time was substantially reduced to 6 min compared with 3 h for conventional hot solvent extraction.
Assuntos
Flavonas/análise , Hidroxibenzoatos/análise , Raios Infravermelhos , Folhas de Planta/química , Rhododendron/química , Cromatografia Capilar Eletrocinética MicelarRESUMO
In this work, a method based on capillary electrophoresis with amperometric detection and far-infrared-assisted extraction has been developed for the determination of mannitol, sucrose, glucose and fructose in Folium Lysium Chinensis, a commonly used traditional Chinese medicine. The water-soluble constituents in the herbal drug were extracted with double distilled water with the assistance of far-infrared radiations. The effects of detection potential, irradiation time, and the voltage applied on the infrared generator were investigated to acquire the optimum analysis conditions. The detection electrode was a 300-µm-diameter copper disk electrode at a detection potential of +0.65 V. The four carbohydrates could be well separated within 18 min in a 50-cm length fused-silica capillary at a separation voltage of 9 kV in a 50-mM NaOH aqueous solution. The relation between peak current and analyte concentration was linear over about three orders of magnitude with detection limits (S/N=3) ranging from 0.66 to 1.15 µM for all analytes. The results indicated that far infrared significantly enhanced the extraction efficiency of the carbohydrates in Folium Lysium Chinensis. The extraction time was significantly reduced to 7 min compared with several hours for conventional hot solvent extraction.
Assuntos
Carboidratos/análise , Carboidratos/isolamento & purificação , Medicamentos de Ervas Chinesas/análise , Medicamentos de Ervas Chinesas/isolamento & purificação , Eletroforese Capilar/métodos , Magnoliopsida/química , Raios Infravermelhos , Magnoliopsida/efeitos da radiação , RadiaçãoRESUMO
This report describes the fabrication and application of a novel graphene/poly(urea-formaldehyde) composite modified electrode as a sensitive amperometric detector of CE. The composite electrode was fabricated on the basis of the in situ polycondensation of a mixture of graphenes and urea-formaldehyde prepolymers on the surface of a platinum disc electrode. It was coupled with CE for the separation and detection of salidroside and tyrosol in Rhodiola, a traditional Chinese medicine, to demonstrate its feasibility and performance. Salidroside and tyrosol have been well separated within 6 min in a 40 cm long capillary at a separation voltage of 12 kV using a 50 mM borate buffer (pH 9.8). The prepared graphene-based CE detector offered significantly lower detection potential, yielded enhanced signal-to-noise characteristics, and exhibited high resistance to surface fouling and enhanced stability. It showed long-term stability and reproducibility with relative standard deviations of less than 5% for the peak current (n = 15).
Assuntos
Eletroforese Capilar/instrumentação , Formaldeído/química , Glucosídeos/análise , Grafite/química , Fenóis/análise , Álcool Feniletílico/análogos & derivados , Rhodiola/química , Ureia/química , Medicamentos de Ervas Chinesas/química , Eletrodos , Eletroforese Capilar/métodos , Glucosídeos/isolamento & purificação , Microscopia Eletrônica de Varredura , Fenóis/isolamento & purificação , Álcool Feniletílico/análise , Álcool Feniletílico/isolamento & purificação , Polímeros/químicaRESUMO
In this report, a novel carbon nanotube/poly(ethylene-co-vinyl acetate) (CNT/EVA) composite electrode was developed for the amperometric detection in CE. The composite electrode was fabricated by packing a mixture of CNTs and melted EVA in a piece of fused-silica capillary under heat. It was coupled with CE for the separation and detection of esculin and esculetin in Cortex Fraxini, a traditional Chinese medicine, to demonstrate its feasibility and performance. Esculin and esculetin have been well separated within 9 min in a 40 cm long capillary at a separation voltage of 12 kV using a 50 mM borate buffer (pH 9.2). The new CNT-based CE detector offered significantly lower detection potentials, yielded enhanced S/N characteristics, and exhibited high resistance to surface fouling and enhanced stability. It showed long-term stability and reproducibility with relative standard deviations of less than 5% for the peak current (n=15) and should also find a wide range of applications in other microfluidic analysis systems.
Assuntos
Medicamentos de Ervas Chinesas/química , Eletroforese Capilar/instrumentação , Esculina/análise , Nanotubos de Carbono , Umbeliferonas/análise , Aesculus , Eletroquímica/instrumentação , Eletroquímica/métodos , Eletrodos , Eletroforese Capilar/métodos , Desenho de Equipamento , Nanotubos de Carbono/química , Nanotubos de Carbono/ultraestrutura , Polivinil/química , Sensibilidade e EspecificidadeRESUMO
Capillary electrophoresis with electrochemical detection has been employed for the determination of honokiol and magnolol in Cortex Magnoliae Officinalis (i.e. Magnolia Bark) for the first time. Effects of several important factors such as the concentration and the acidity of the running buffer, separation voltage, injection time, and detection potential were investigated to acquire the optimum conditions. The detection electrode was a 300 microm diameter carbon disc electrode at a working potential of +0.90 V (versus saturated calomel electrode (SCE)). The two analytes can be well separated within 6 min in a 40 cm length fused silica capillary at a separation voltage of 18 kV in a 50mM borate buffer (pH 9.2). The relation between peak current and analyte concentration was linear over about three orders of magnitude with the detection limits (S/N=3) of 0.38 and 0.51 microM for honokiol and magnolol, respectively. The proposed method has been successfully applied to monitor the two bioactive constituents in the real plant samples with satisfactory assay results.
Assuntos
Antiarrítmicos/análise , Compostos de Bifenilo/análise , Medicamentos de Ervas Chinesas/análise , Lignanas/análise , Magnolia , Eletroquímica , Eletrodos , Eletroforese Capilar/métodos , Concentração de Íons de Hidrogênio , Casca de Planta , Análise de RegressãoRESUMO
A method based on capillary electrophoresis with electrochemical detection has been developed for the separation and determination of paeoniflorin, sucrose, paeonoside, glucose, and fructose in Moutan Cortex for the first time. Effects of several important factors such as the concentration of NaOH, separation voltage, injection time, and detection potential were investigated to acquire the optimum conditions. The detection electrode was a 300 microm diameter copper disc electrode at a working potential of +0.60 V (versus saturated calomel electrode (SCE)). The five analytes can be well-separated within 12 min in a 40 cm length fused silica capillary at a separation voltage of 12 kV in a 75 mM NaOH aqueous solution. The relation between peak current and analyte concentration was linear over about 3 orders of magnitude with detection limits (S/N = 3) ranging from 0.9 to 1.3 microM for all analytes. The proposed method has been successfully applied to monitor glycoside and sugar contents in the real plant samples with satisfactory assay results.
Assuntos
Carboidratos/análise , Química Farmacêutica/métodos , Medicamentos de Ervas Chinesas/química , Eletroquímica/métodos , Eletroforese Capilar/métodos , Glicosídeos/análise , Soluções Tampão , Calibragem , Eletrodos , Modelos Químicos , Paeonia , Fatores de TempoRESUMO
Capillary electrophoresis with electrochemical detection has been employed for the separation and determination of the three active constituents (paeonol, benzoyloxypaeoniflorin, and oxypaeoniflorin) in traditional Chinese medicine, Moutan Cortex (root cortex of Paeonia suffruticosa Andrews). The effects of several important factors, such as the concentration of running buffer, the separation voltage, the injection time, and the detection potential, were investigated to determine the optimum conditions. The detection electrode was a 300 microm diameter carbon-disc electrode at a working potential of +0.90 V (versus SCE). The three analytes could be well separated within 7 min in a 40 cm length fused-silica capillary at a separation voltage of 12 kV in a 50 mM borate buffer (pH 9.2). The relation between the peak current and the analyte concentration was linear over 3 orders of magnitude with detection limits (S/N = 3) ranging from 0.4 to 0.7 microM for all analytes. The proposed method has been successfully applied to the determination of paeonol, benzoyloxypaeoniflorin, and oxypaeoniflorin in real plant samples with satisfactory assay results.
Assuntos
Medicamentos de Ervas Chinesas/análise , Medicamentos de Ervas Chinesas/química , Eletroquímica/métodos , Eletroforese Capilar/métodos , Acetofenonas/análise , Acetofenonas/química , Medicamentos de Ervas Chinesas/uso terapêutico , Glicosídeos/análise , Glicosídeos/química , Paeonia , Terpenos/análise , Terpenos/químicaRESUMO
A method based on capillary electrophoresis with electrochemical detection has been developed for the separation and determination of paeoniflorin, sucrose, glucose, and fructose in traditional Chinese medicine, Radix Paeoniae Alba. The effects of several important factors, such as the concentration of NaOH, the separation voltage, the injection time, and the detection potential, were investigated to determine the optimum conditions. The detection electrode was a 300-microm diameter copper disc electrode at a working potential of +0.60 V (versus SCE). The four analytes can be well separated within 8 min in a 40 cm length fused-silica capillary at a separation voltage of 12 kV in a 75 mM NaOH aqueous solution. The relation between the peak current and the analyte concentration was linear over about 3 orders of magnitude with detection limits (S/N = 3) ranging from 1 to 2 microM for all analytes. The proposed method has been successfully applied for the determination of the paeoniflorin and sugars in real plant samples with satisfactory assay results.
Assuntos
Benzoatos/análise , Hidrocarbonetos Aromáticos com Pontes/análise , Carboidratos/análise , Eletroforese Capilar/métodos , Glucosídeos/análise , Paeonia/química , Benzoatos/química , Hidrocarbonetos Aromáticos com Pontes/química , Carboidratos/química , Glucosídeos/química , Medicina Tradicional Chinesa , Estrutura Molecular , Monoterpenos , Paeonia/classificação , Raízes de Plantas/química , Reprodutibilidade dos Testes , Fatores de TempoRESUMO
A method based on capillary electrophoresis with electrochemical detection (CE-ED) has been developed for the determination of hesperidin (HP) and synephrine (SP) in the Chinese traditional herbal drug, Pericarpium Citri Reticulatae, the dried rind of the ripe fruits of Citrus reticulata Blanco (mandarin orange). The effects of some important factors such as the acidity and concentration of running buffer, separation voltage, and detection potential were investigated to determine the optimum conditions. The working electrode was a 300 microm diameter carbon disc electrode positioned opposite the outlet of the capillary. Both analytes could be well separated within 5 min in a 40 cm long capillary at a separation voltage of 12 kV in 50 mmol L(-1) borate buffer (pH 9.0). Excellent linearity was observed for the dependence of peak current on analyte concentration in the range from 2.5 x 10(-6) to 1.0 x 10(-3) mol L(-1) for SP and from 5.0 x 10(-6) to 1.0 x 10(-3) mol L(-1) for HP. The detection limits (S/N=3) for SP and HP were 4.96 x 10(-7) mol L(-1) and 6.54 x 10(-7) mol L(-1), respectively. This method has been successfully applied for the analysis of real samples, with satisfactory results.