Ultrasonic-assisted activated carbon separation removing bacterial endotoxin from salvia miltiorrhizae injection.

Ultrasonic-assisted activated carbon separation (UACS) was first employed to improve product quality by regulating adsorption rate and removing bacterial endotoxin from salvia miltiorrhizae injection. The adsorption rate was related to three variables: activated carbon dosage, ultrasonic power, and pH. With the increase of activated carbon dosage from 0.05 % to 1.0 %, the adsorption rates of salvianolic acids and bacterial endotoxin increased simultaneously. The adsorption rates at which bacteria endotoxins increased from 52.52 % to 97.16 % were much higher than salvianolic acids. As the ultrasonic power increased from 0 to 700 W, the adsorption rates of salvianolic acids on activated carbon declined to less than 10 %, but bacterial endotoxin increased to more than 87 %. As the pH increased from 2.00 to 8.00, the adsorption rate of salvianolic acid dropped whereas bacterial endotoxin remained relatively stable. On the basis of response surface methodology (RSM), the optimal separation conditions were established to be activated carbon dose of 0.70 %, ultrasonic power of 600 W, and pH of 7.90. The experimental adsorption rates of bacterial endotoxin were 94.15 %, which satisfied the salvia miltiorrhizae injection quality criterion. Meanwhile, salvianolic acids' adsorption rates were 1.92 % for tanshinol, 4.05 % for protocatechualdehyde, 2.21 % for rosmarinic acid, and 3.77 % for salvianolic acid B, all of which were much lower than conventional activated carbon adsorption (CACA). Salvianolic acids' adsorption mechanism on activated carbon is dependent on the component's molecular state. Under ideal separation conditions, the molecular states of the four salvianolic acids fall between 1.13 % and 6.60 %. The quality of salvia miltiorrhizae injection can be improved while maintaining injection safety by reducing the adsorption rates of salvianolic acids to less than 5 % by the use of ultrasound to accelerate the desorption mass transfer rate on the activated carbon surface. When activated carbon adsorption was used in the process of producing salvia miltiorrhizae injection, the pH of the solution was around 5.00, and the proportion of each component's molecular state was tanshinol 7.05 %, protocatechualdehyde 48.93 %, rosmarinic acid 13.79 %, and salvianolic acid B 10.28 %, respectively. The loss of useful components was evident, and the corresponding activated carbon adsorption rate ranged from 20.74 % to 41.05 %. The average variation rate in plasma His and IgE was significant (P < 0.05) following injection of 0.01 % activated carbon, however the average variation rate of salvia miltiorrhizae injection was dramatically decreased with the use of UACS and CACA (P > 0.05). The ultrasonic at a power intensity of 60 W/L and the power density of 1.20 W/cm2 may resolve the separation contradiction between salvianolic acids and bacterial endotoxin, according to experiments conducted with UACS at different power intensities. According to this study, UACS has a lot of potential applications in the pharmaceutical manufacturing industry and may represent a breakthrough in the field of ultrasonic separation.

[Exploration of nanofiltration conditions for separation of alcohol precipitation liquid during preparation of Reduning Injection by Box-Behnken design combined with flux attenuation].

This study employed Box-Behnken design combined with flux attenuation to explore the nanofiltration conditions for separation of alcohol precipitation liquid during the preparation of Reduning Injection and discussed the applicability of nanofiltration in the separation of the liquid with high-concentration ethanol. The effects of nanofiltration molecular weight cut-off(MWCO) and pH on the rejection of chlorogenic acid, 3,5-dicaffeoylquinic acid, and 4,5-dicaffeoylquinic acid were consistent with the principles of pore size sieving and charge effect, respectively. The rejection of the three phenolic acids was reduced by concentration polarization effect caused by trans-membrane pressure(TMP). The swelling of membrane surface decreased the pore size and membrane flux for effective separation. Chlorogenic acid and 4,5-dicaffeoylquinic acid were more sensitive to pH and ethanol concentration than 3,5-dicaffeoylquinic acid. A certain correlation existed between the compound structure and the separation factors of nanofiltration, and the separation rules were associated with the comprehensive effect of charge effect, pore size sieving, concentration polarization, steric hindrance and so on.

[Comparison of activated carbon and ultrafiltration technique in the production process of huoxue tongluo injection].

OBJECTIVE: To research the applicability of activated carbon and ultrafiltration technique in the production process of Huoxue Tongluo Injection. METHODS: The kinetic-turbidimetric method was used to determine the content of bacterial endotoxins in Huoxue Tongluo solution. Particle size change in Huoxue Tongluo solution was determined by nanometer particle size instrument before and after the use of different concentration activated carbon and different molecular weight ultrafiltration membrane. RESULTS: The removal efficacy of bacterial endotoxins was 65.2%, 77.5%, 80.4% by using three concentrations of active carbon at 0.05%, 0.10%, 0.30% in Huoxue Tongluo Injection, respectively. It was above 95% by using cutoff molecular weight both 5 kDa and 10 kDa ultrafiltration membrane. Measure results by nanometer particle size instrument showed that particle size of filter liquor by 10 kDa cutoff molecular weight ultrafiltration membrane was much smaller than that of by use of different concentration activated carbon. CONCLUSION: Ultrafiltration method is more suitable to the removal of bacterial endotoxins. The solution is more clear after using ultrafiltration method, and large particles of solution is removed. The ultrafiltration method provides the basis for injection production.

[Speciation of inorganic elements in Chinese medicine and some factors influenced their biopharmceutical characteristics].

The paper reviews the speciation, process in vivo and biological effects of inorganic elements in Chinese medicine (CM) in the aspect of biopharmaceutics. We also summarize some factors influenced the biopharmceutical characteristics of drugs, including physical and chemical properties, formulation development, body's biological states and different actions. It is significant to safety, rationality of using of CM and modernization, internationalization of CM.