A Novel Preparation Method for Effervescent Tablets of Xianganfang Containing Fresh Juice using a Semi-Solid Extrusion 3D Printer with Three Cartridge Holders.

This study aimed to prepare effervescent tablets of traditional Chinese medicine Xianganfang with fresh juice using a semi-solid 3D printer with three cartridge holders to seperate acid and alkali source by drug paste through model design to avoid sticking impact and premature effervescence during the tableting in the conventional preparation process. The powder of Xianganfang including fresh juice of Phyllanthus emblica and licorice extract was obtained by vacuum freeze-drying with 50% mannitol as cryoprotectant. Then, the formulation of 3D-printed effervescent tablets was investigated. Further 5% HPMC hydroalcoholic gel was mixed with sodium bicarbonate and freeze-dried Xianganfang powder to prepare alkali source and drug paste respectively while 30% PVP ethanol solution was mixed with tartaric acid to prepare acid source paste; these three pastes had good printability. The pastes of drug, acid, and alkali were loaded into three syringe cartridges separately and numbered as "3," "5," and "7," according to cartridge holders of the 3D printer, and printed in the order of "537,353,735" for separating acid and alkali by drug to avoid premature effervescence. And the basic printing parameters were optimized. The tablets were evaluated by the appearance, tablet weight variation, hardness, disintegration time, friability, pH, and stability. The physicochemical properties all conformed to the Chinese Pharmacopoeia 2020 edition. The content of the active ingredient gallic acid was 0.769 ± 0.019 mg/g. This study provided a new method to prepare effervescent tablets of traditional Chinese medicine with fresh juice using 3D printing technology.

Warpage optimization and influence factors analysis of 3D printing personalized JJY tablets.

To explore the feasibility of preparing traditional Chinese medicine using 3 D printing technology and reduce warpage commonly occurs in large-size tablets, we investigated the prescription, warpage optimization and influence factors of 3 D printing Jiuxiang Jianpi Yangwei (JJY) tablets. The procedures used conformed to the requirements of the 2015 edition of the Chinese Pharmacopeia. The results of the prescription screening showed that 75% ethanol and HPMC (9%) could be adhesives. Meanwhile, stevia (0.5%) and citric acid (0.5%) improved the taste of the 3 D printed JJY tablets. To ensure the quality and appearance of the printed tablets, the best parameters were as follows: drying at room temperature, 40% of the filling density, a 3 mm model height, two outer ring numbers and a printing speed of 15 mm/s. The optimized printed tablets had a smooth appearance, suitable hardness, with the weight uniformity in accordance with the Pharmacopeia. We also prepared personalized JJY cartoon tablets (which contained images of a big-headed pig and a small yellow duck) which were designed to increase the compliance of children when taking their medications. In conclusion, this study reported that 3 D printing technology has great potential for preparing traditional Chinese medicines, and it provided guidance for 3 D printing tablets without warpage.