Hydrothermally tailor-made chitosan fiber for micro-solid phase extraction of petroleum acids in crude oils.

Tailor-made chitosan fiber was prepared via hydrothermal treatment to serve as a micro-solid phase extraction (micro-SPE) sorbent for the analysis of petroleum acids (PAs) in crude oils. Chitosan fiber, which is commercial and cheap, has a diameter of about 10 µm and a length of a few centimeters. The fibrous property of the sorbent enables the micro-SPE to deal with viscous crude oil samples because of the low back-pressure during extraction, while the abundant hydroxyl groups and amino groups on the surface of chitosan fiber can provide high density of specific sites for adsorption of PAs. Moreover, it was found that hydrothermal treatment at certain conditions could tune the surface properties of chitosan fiber, leading to significant improvement of the capacity of the fiber in adsorption of PAs. Using hydrothermally treated chitosan fiber as sorbent, the micro-SPE was applied to the determination of PAs in crude oils, with the advantages of easy-operation, rapidness and high sensitivity (the limits of detection range from 0.7 ng/g to 5.4 ng/g). Furthermore, coupled with comprehensive two dimensional gas chromatography-mass spectrometry (GC × GCMS), the treated chitosan fiber packed micro-SPE method showed a great potential for comprehensive profiling of PAs in crude oils.

Determination of diamondoids in crude oils using gas purge microsyringe extraction with comprehensive two dimensional gas chromatography-time-of-flight mass spectrometry.

Based on a homemade device, gas purge microsyringe extraction (GP-MSE) of crude oil samples was developed for the first time. As a simple, fast, low-cost, sensitive and solvent-saving technique, GP-MSE provides some outstanding advantages over the widely used sample preparation methods for crude oils such as column chromatography (ASTM D2549). Several parameters affecting extraction efficiency were optimized, including extraction temperature, extraction time, extraction solvent, condensing temperature and purge gas flow rate. With the optimized GP-MSE conditions, several real crude oil samples were extracted, and trace diamondoids were determined using comprehensive two dimensional gas chromatography-time-of-flight mass spectrometry (GC×GC-TOFMS). In total, more than 100 diamondoids were detected and 27 marker compounds were identified and quantified accurately. The limits of detection (LODs, S/N=3) were less than 0.08µg/L for all diamondoids. The relative standard deviation (RSD) was below 8%, ranging from 1.1 to 7.6%. The linearity of the developed method was in the range of 0.5-100.0µg/L with correlation coefficients (R2) more than 0.996. The recoveries obtained at spiking 50µg/L were between 81 and 108% for diamondoids in crude oil samples. The developed method can also be extended to the analysis of other components in crude oils and other complex matrices.

Facile synthesis of magnetic carbon nitride nanosheets and its application in magnetic solid phase extraction for polycyclic aromatic hydrocarbons in edible oil samples.

In this study, we proposed a method to fabricate magnetic carbon nitride (CN) nanosheets by simple physical blending. Low-cost CN nanosheets prepared by urea possessed a highly π-conjugated structure; therefore the obtained composites were employed as magnetic solid-phase extraction (MSPE) sorbent for extraction of polycyclic aromatic hydrocarbons (PAHs) in edible oil samples. Moreover, sample pre-treatment time could be carried out within 10 min. Thus, a simple and cheap method for the analysis of PAHs in edible oil samples was established by coupling magnetic CN nanosheets-based MSPE with gas chromatography-mass spectrometry (GC/MS) analysis. Limits of quantitation (LOQs) for eight PAHs ranged from 0.4 to 0.9 ng/g. The intra- and inter-day relative standard deviations (RSDs) were less than 15.0%. The recoveries of PAHs for spiked soybean oil samples ranged from 91.0% to 124.1%, with RSDs of less than 10.2%. Taken together, the proposed method offers a simple and cost-effective option for the convenient analysis of PAHs in oil samples.