[Critical quality attribute characterization of big brand TCM: taste formulation optimization strategy and application of Xiaoer Ganmao Oral Liquid based on taste quality attribute].

The taste is the quality attribute for the development and production of traditional Chinese medicine(TCM). To improve the medication compliance of the big brand TCM, Xiaoer Ganmao Oral Liquid, a correlation model between the electronic tongue sensor signal value and human sensory evaluation score was established, and an optimization strategy of taste improvement for Xiaoer Ganmao Oral Liquid was developed with the key techniques of statistical experimental design. Based on the above model, the optimal formulation was determined as follows: aspartame content of 1-2 mg·mL~(-1), acesulfame-K content of 1.5-3 mg·mL~(-1), and steviol glycoside content of 1-2 mg·mL~(-1). Furthermore, the optimal formulation was verified by human sensory evaluation. Therefore, the taste of Xiaoer Ganmao Oral Liquid was improved. Taking Xiaoer Ganmao Oral Liquid as an example, the present study developed the taste formulation optimization method based on the correlation between the electronic tongue and human sensory evaluation, which is expected to provide an important reference to improve the taste of oral liquid of TCM.

[Critical quality attribute assessment of big brand traditional Chinese medicine: modular identification of Tongren Niuhuang Qingxin Pills based on efficacy with chemical properties].

Identification of critical quality attribute(CQA) is crucial in quality control of Tongren Niuhuang Qingxin Pills(TRNHQXP). In this study, 661 active components in TRNHQXP were selected by liquid chromatography-mass spectrometry(LC-MS) and network pharmacology based on reported data and TCMSP, BATMAN-TCM, and TCMID databases, as well as mass spectrometry data, and 1 413 targets of the active components were obtained through SwissTargetPrediction. The 152 potential targets obtained from the intersection of predicted targets with 456 stroke targets underwent functional enrichment analysis by Metascape. The 27 Chinese medicinals in TRNHQXP were divided into four sets according to efficacies. Thirty-seven key targets in the blood-activating and stasis-resolving set and 41 in the tonifying set were screened out. On the basis of these potential key targets, 137 potential key CQA of TRNHQXP for stroke were reversely predicted. This study revealed the possible mechanism of TRNHQXP in treating stroke and established a modular identification method for the potential CQA of big brand traditional Chinese medicine(TCM) based on efficacies and chemical properties. Consequently, the CQA of TRNHQXP were identified by this method, which has provided a reference for the following experimental studies of CQA.

[Criticalquality attribute assessment of big brand traditional Chinese medicine: visualization method for quality control of Ginkgo Leaves Tablets based on spatial distribution uniformity].

Spatial distribution uniformity is the critical quality attribute(CQA) of Ginkgo Leaves Tablets, a variety of big brand traditional Chinese medicine. The evaluation of the spatial distribution uniformity of active pharmaceutical ingredients(APIs) in Ginkgo Leaves Tablets is important in ensuring their stable and controllable quality. In this study, hyperspectral imaging technology was used to construct the spatial distribution map of API concentration based on three prediction models, further to realize the visualization research on the spatial distribution uniformity of Ginkgo Leaves Tablets. The region of interest(ROI) was selected from each Ginkgo Leaves Tablet, with length and width of 50 pixels, and a total of 2 500 pixels. Each pixel had 288 spectral channels, and the number of content prediction data could reach 1×10~5 for a single sample. The results of the three models showed that the Partial Least Squares(PLS) model had the highest prediction accuracy, with calibration set determination coefficient R_(pre)~2 of 0.987, prediction set determination coefficient R_(pre)~2 of 0.942, root mean square error of calibration(RMSEC) of 0.160%, and root mean square error of prediction(RMSEP) of 0.588%. The classical least-squares(CLS) model had a greater prediction error, with the RMSEP of 0.867%. Multivariate Curve Resolution-Alternating Least Square(MCR-ALS) model showed the worst predictive ability among the three models, and it couldn't realize content prediction. Based on the prediction results of PLS and CLS models, the spatial distribution map of APIs concentration was obtained through three-dimensional data reconstruction. Furthermore, histogram method was used to evaluate the spatial distribution uniformity of API. The data showed that the spatial distribution of APIs in Ginkgo Leaves Tablets was relatively uniform. The study explored the feasibility of visualization of spatial distribution of Ginkgo Leaves Tablets based on three models. The results showed that PLS model had the highest prediction accuracy, and MCR-ALS model had the lowest prediction accuracy. The research results could provide a new strategy for the visualization method of quality control of Ginkgo Leaves Tablets.

[Critical quality attribute assessment of big brand traditional Chinese medicine: quality control method of Huangjing Zanyu Capsules based on chemical properties of characteristic components].

The chemical properties of characteristic components are significant to the manufacturing quality control of big brand traditional Chinese medicine. In this study, the Huangjing Zanyu Capsules were used as the research carrier to determine the content of five characteristic components including icraiin, emodin, schisandrin A, 2,3,5,4'-tetrahydroxystilbene-2-O-ß-D-glucoside, and osthole simultaneously by high-performance liquid chromatography(HPLC). The results showed that the chemical properties of five cha-racteristic components had a good linear relationship(r>0.999 9) within the quantitative range; the relative standard deviations(RSD) was 0.11%-2.0% and 0.25%-2.8% respectively for intra-day and inter-day precision; the RSD of repeatability was 1.8%-2.6%; the RSD of stability within 48 hours was 0.19%-2.8%, and the average recovery rate was 95.52%-100.1%, all meeting the requirements of pharmaceutical quantitative analysis. Additionally, the interval estimation method was used to directly reflect the distribution of samples with abnormal chemical properties of characteristic components, and the results showed ten samples were detected beyound the 95% control line of confidence level. Multivariate statistical process control(MSPC) method was used to monitor the abnormal samples of Huangjing Zanyu Capsules collectively, and the results showed that two samples were beyond the 95% control line of Hotelling's T~2 and three samples beyond the 95% control line of squared prediction error(SPE), indicating consistent quality control of Huangjing Zanyu Capsules. In conclusion, the proposed method is not only accurate and efficient but also a compensation for the traditional single-component quality control method, providing a scientific basis for the quality control in manufacturing process of Huangjing Zanyu Capsules. Furthermore, it could also serve as a reference method for the quality control in manufacturing big brand traditional Chinese medicine.

System optimisation quantitative model of on-line NIR: a case of Glycyrrhiza uralensis Fisch extraction process.

INTRODUCTION: The on-line analysis of active pharmaceutical ingredients (APIs) during the extraction process in herbal medicine is a challenge. Establishing a reliable and robust model is a critical procedure for the industrial application of on-line near-infrared (NIR) technology. OBJECTIVE: To evaluate the advantages of on-line NIR model development using system optimisation strategy, Glycyrrhiza uralensis Fisch was used as a case. The content of liquiritin and glycyrrhizic acid was monitored during pilot scale extraction process of Glycyrrhiza uralensis Fisch in three batches. METHODS: High-performance liquid chromatography (HPLC) was used as reference method for content determination of liquiritin and glycyrrhizic acid. The quantitative models of on-line NIR were developed by system optimisation of processing trajectory. For comparison, the models were simultaneously developed by stepwise optimisation. Moreover, the modelling parameters obtained through system optimisation and stepwise optimisation were reused in three batches. Root mean square error of prediction (RMSEP) and residual predictive deviation (RPD) were used to assess the model quality. RESULTS: The average values of RMSEP and RPD of systematic model for liquiritin in three batches were 0.0361, 4.1525 (first batch), 0.0348, 4.7286 (second batch) and 0.0311, 4.9686 (third batch), respectively. In addition, the modelling parameters of systematic model for glycyrrhizic acid in three batches were same, and the average values of RMSEP and RPD were 0.0665 and 5.2751, respectively. The predictive performance and robustness of systematic models for the three batches were better than the comparison models. CONCLUSION: The work demonstrated that system optimisation quantitative model of on-line NIR could be used to determine the contents of liquiritin and glycyrrhizic acid during Glycyrrhiza uralensis Fisch extraction process.

[Research of hospital preparations based on QbD concept: whole process optimization strategy of gynecological antipruritic lotion].

The stable quality of hospital preparations is the basis for their clinical efficacy. Gynecological antipruritic prescription is widely used in gynecology clinics of Chinese medicine hospitals. Therefore,in this study,the production process of gynecological antipruritic lotion was optimized based on the concept of quality by design( QbD). The production process of the gynecological antipruritic lotion was developed to ensure its process stability and reliable quality,and enhance its clinical applicability. With total amount of matrine and oxymatrine used as the critical quality attribute( CQA) of the production process,parameter levels were designed based on production practice of hospital preparations,and Plackett-Burman and Box-Behnken experiments were used to optimize the water extraction and alcohol precipitation process of antipruritic lotion based on CQA of intermediates and final product. The soaking time,the first extraction time,and the second extraction time were determined as the critical process parameters( CPPs) of the production process. The optimal preparation process was as follows: water volume of 8 times,soaking for 0. 5 h,extraction for 2 times,the first extraction for 30 min,the second extraction for 56 min,alcohol concentration of 50%,and alcohol precipitation for 3 h. Furthermore,the design space was established based on the binomial regress model between CPPs and CQA,so as to set the optimization target and risk range; and the control space was displayed by overlay plot. The results of three repeated experiments in the control space showed that the relative standard deviation( RSD) of CQA was 4. 70%,and the similarity of chromatogram for gynecological antipruritic lotion was 0. 978,0. 974,and 0. 998,respectively. The above results indicated that the operation in the control space can guarantee the quality and stability of gynecological antipruritic lotion,suitable for practical application.