Syrupy herbal formulation of green bean pod extract of Phaseolus vulgaris L.: Formulation optimization by central composite design, and evaluation for anti-urolithiatic activity.

The green bean pods of Phaseolus vulgaris L. are traditionally used as a folk remedy for treating calcium oxalate kidney stones. The current research aimed to develop a syrup formulation containing green bean pod extract for anti-urolithiatic activity. The syrup was prepared using a simple blending method and optimized through a central composite design (CCD) with two independent variables: the ratio of pod juice (PJ) to sugar solution (SS) ranging from 1:0.5 to 1:1.5, and the percentage of CMC from 0.2% to 0.4% w/v. These variables were analyzed for their impact on viscosity (CP) and sedimentation percentage, helping to identify the best formulation out of 13 variants. The finalized formulation (F-opt) underwent assessment for physicochemical characteristics such as organoleptic properties, viscosity, density, sedimentation rate, and stability. Additionally, a microbiological assessment was performed utilizing the spread plate method. Further, it was evaluated for in vitro, ex vivo, and in vivo anti-urolithiatic activity in rat models for 28 days and compared with that of the reference standard (Cystone syrup). Additionally, acute toxicity was assessed in albino Swiss mice. Histopathological evaluations were then conducted on the kidneys of the Wistar rats that had been used for the in vivo studies, providing insight into the treatment effects on kidney tissue structure. The optimized formulation (F-opt) was a green, viscous, clear syrup with a pH of 5.8, a viscosity of 256.38 CP, a density of 1.31 g/ml, and a sedimentation rate of 0.69%. The optimized formulation was found to be stable, showing no significant changes in physicochemical and microbiological properties. The results of the in vitro, ex vivo, and in vivo anti-urolithiatic studies indicated that the optimized formulation effectively inhibited the aggregation of calcium oxalate. The acute toxicity studies revealed no mortality or adverse effects for both the optimized formulation and pure bean pod juice at a dose of 2000 mg/kg body weight. Histopathological examination revealed that rats treated with the optimized formulation exhibited a significant reduction in both the number and size of calcium oxalate deposits within various parts of the renal tubules. It can be concluded that the syrupy formulation of Phaseolus vulgaris L. green bean pod extract demonstrated significant anti-urolithiatic activity. This activity could be due to its diuretic properties and its ability to inhibit the formation of calcium oxalate crystals. However, limitations of the study included a lack of elucidation of the mechanism and limited generalizability of the findings.

Innovative utilization of harvested mushroom substrate for green synthesis of silver nanoparticles: A multi-response optimization approach.

In this work, harvested mushroom substrate (HMS) has been explored for the first time through a comprehensive optimization study for the green synthesis of silver nanoparticles (AgNPs). A multiple response central composite design with three parameters: pH of the reaction mixture, temperature, and incubation period at three distinct levels was employed in the optimization study. The particle size of AgNPs, UV absorbance, and the percentage of Ag/Cl elemental ratio were considered as the response parameters. For each response variable examined the model used was found to be significant (P < 0.05). The ideal conditions were: pH 8.9, a temperature of 59.4 °C, and an incubation period of 48.5 h. The UV-visible spectra of AgNPs indicated that the absorption maxima for AgNP-3 were 414 nm, 420 for AgNPs-2, and 457 for AgNPs-1. The XRD analysis of AgNPs-3 and AgNPs-2 show a large diffraction peak at ∼38.2°, ∼44.2°, ∼64.4°, and ∼77.4°, respectively, which relate to the planes of polycrystalline face-centered cubic (fcc) silver. Additionally, the XRD result of AgNPs-1, reveals diffraction characteristics of AgCl planes (111, 200, 220, 311, 222, and 400). The TEM investigations indicated that the smallest particles were synthesized at pH 9 with average diameters of 35 ± 6 nm (AgNPs-3). The zeta potentials of the AgNPs are -36 (AgNPs-3), -28 (AgNPs-2), and -19 (AgNPs-1) mV, respectively. The distinct IR peak at 3400, 1634, and 1383 cm-1 indicated the typical vibration of phenols, proteins, and alkaloids, respectively. The AgNPs were further evaluated against gram (+) strain Bacillus subtilis (MTCC 736) and gram (-) strain Escherichia coli (MTCC 68). All of the NPs tested positive for antibacterial activity against both bacterial strains. The study makes a sustainable alternative to disposing of HMS to achieve the Sustainable Development Goals (SDGs).

Anaerobic digestion of crude glycerol from biodiesel production for biogas generation: Process optimization and pilot scale operation.

Anaerobic digestion of wastes and wastewater is a complex process that can be affected by many operational parameters. In this context, the purpose of the present study was to optimize biogas production using crude glycerol (GLY) generated in biodiesel production from waste cooking oil without pretreatment or nutrient supplementation. The study was divided into two parts: the first phase consisted of an experimental design based on central composite design (CCD) with two variables (food to microorganism (F/M) ratio and cycle time) at five levels (F/M of 0.20; 0.51; 1.02; 1.53 and 2.04 gCOD/gVS; tc of 3, 4, 5, 6, 7 days) focusing on optimizing the biogas production from crude GLY in lab-scale batch reactors (500 mL). The second phase was conducted on a pilot-scale biodigester (1.2 m3) based on the optimized variables obtained from the CCD. The optimized results showed that the F/M ratio of 2.04 gCOD/gVS and a cycle time (tc) of 6 days reached the highest specific methane production (SMP) of 46 LCH4/kgVS. However, the highest SMP of 14.7 LCH4/kgVSd was obtained during the operation of the pilot-scale biodigester for the optimized conditions of F/M ratio of 0.23 gCOD/gSV and a tc of 7 days. Therefore, pilot-scale biogas production from crude GLY was demonstrated to be feasible without the use of nutrients or GLY pretreatment at 0.15 LGLY/m3 d.

[Preparation and quality evaluation of total flavonoids microemulsion of "Pueraria lobata-Hovenia dulcis"].

The effective components of flavonoids in the "Pueraria lobata-Hovenia dulcis" drug pair have low bioavailability in vivo due to their unstable characteristics. This study used microemulsions with amphoteric carrier properties to solve this problem. The study drew pseudo-ternary phase diagrams through titration compatibility experiments of the oil phase with emulsifiers and co-emulsifiers and screened the prescription composition of blank microemulsions. The study used average particle size and PDI as evaluation indicators, and the central composite design-response surface method(CCD-RSM) was used to optimize the prescription; high-dosage drug-loaded microemulsions were obtained, and their physicochemical properties, appearance, and stability were evaluated. The results showed that when ethyl butyrate was used as the oil phase, polysorbate 80(tween 80) as the surfactant, and anhydrous ethanol as the cosurfactant, the maximum microemulsion area was obtained. When the difference in results was small, K_(m )of 1∶4 was chosen to ensure the safety of the prescription. The prescription composition optimized by the CCD-RSM was ethyl butyrate(16.28%), tween 80(9.59%), and anhydrous ethanol(38.34%). When the dosage reached 3% of the system mass, the total flavonoid microemulsion prepared had a clear and transparent appearance, with average particle size, PDI, and potential of(74.25±1.58)nm, 0.277±0.043, and(-0.08±0.07) mV, respectively. The microemulsion was spherical and evenly distributed under transmission electron microscopy. The centrifugal stability and temperature stability were good, and there was no layering or demulsification phenomenon, which significantly improved the in vitro dissolution of total flavonoids.

Enhancing wool dyeing with clove bud (Syzygium aromaticum) based natural dye via microwave treatment using a central composite design.

This research investigates the viability of using Syzygium aromaticum (clove) as a natural dye for wool yarn through the application of microwave treatment and optimization using central composite design (CCD). As concerns grow over the environmental impact of synthetic dyes and their detrimental disposal in water bodies, the search for eco-friendly alternatives becomes imperative to revolutionize the textile industry. Microwave-assisted extraction of the colorant from clove powder is explored as an efficient and sustainable method, minimizing solvent usage and energy consumption compared to conventional techniques. To enhance colorfastness properties while eliminating the need for toxic mordants, green alternatives such as Al, Fe, and tannic acid, combined with plant phenolics from red sumac, pomegranate rind, and weld, are employed. According to the analysis of CCD, the higher color strength value 18.1653 was achieved using pH = 3, time = 50 min, temperature = 70 °C, and salt concentration = 1.5 g/100 mL. The optimized dyeing conditions also showed a maximum level of colorfastness properties of 5 for light, 5 for wash, 5 for dry rubbing, and 4 for wet rubbing. The findings from Fourier-transform infrared spectroscopy and scanning electron microscopy analyses provide valuable insights into the chemical and morphological changes induced by microwave treatment and dyeing with clove extract. The results affirm the presence of eugenol as a potential active molecule responsible for the captivating color of clove flower buds, validating its suitability as a natural dye source for wool. This study highlights the promising potential of microwave-assisted extraction and plant-based biomolecules as innovative and environmentally friendly approaches in natural dyeing, paving the way for a more sustainable future in the textile industry. Embracing these eco-friendly practices allows the textile sector to reduce its ecological footprint and contribute to a cleaner and greener environment. Further research and implementation of these techniques can foster a more harmonious coexistence with nature, ensuring a healthier ecosystem for all.

Enhancing tomato plant growth in a saline environment through the eco-friendly synthesis and optimization of nanoparticles derived from halophytic sources.

Using green synthesis methods to produce halophytic nanoparticles presents a promising and cost-effective approach for enhancing plant growth in saline environments, offering agricultural resilience as an alternative to traditional chemical methods. This study focuses on synthesizing zinc oxide (ZnO) nanoparticles derived from the halophyte Withania somnifera, showcasing their potential in ameliorating tomato growth under salinity stress. The biosynthesis of ZnO nanoparticles was initially optimized (i.e., salt concentration, the amount of plant extract, pH, and temperature) using a central composite design (CCD) of response surface methodology (RSM) together with UV-Vis spectroscopy, Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and dynamic light scattering (DLS) to comprehensively characterize the biosynthesized ZnO NPs. The central composite design (CCD) based response surface methodology (RSM) was used to optimize the biosynthesis of ZnO nanoparticles (NPs) by adjusting salt concentration, plant extract, pH, and temperature. The ZnO NPs were characterized using UV-Vis spectroscopy, Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and dynamic light scattering (DLS). FT-IR showed an absorption peak of ZnO between 400 and 600 cm-1, while SEM showed irregular shapes ranging between 1.3 and 6 nm. The data of EDX showed the presence of Zn (77.52%) and O (22.48%) levels, which exhibited the high purity synthesized ZnO under saline conditions. Introducing ZnO nanoparticles to tomato plants resulted in a remarkable 2.3-fold increase in shoot length in T23 (100 mg/L ZnO nanoparticles + 50 mM NaCl). There was an observable increase in foliage at T2 (20 mg L-1 ZnO) and T23 (100 mg L-1 ZnO-NPs + 50 mM NaCl). Tomato plants treated with T2 (20 mg L-1 ZnO) and T23 (100 mg L-1 ZnO-NPs + 50 mM NaCl) improved root elongation compared to the control plant group. Both fresh and dry leaf masses were significantly improved in T1 (10 mg L-1 ZnO) by 7.1-fold and T12 (10 mg L-1 ZnO-NPs + 100 mM NaCl) by 0.8-fold. The concentration of Zn was higher in T12 (10 mg L-1 ZnO NPs + 100 mM NaCl) among all treatments. Our findings prove that utilizing ZnO nanoparticles under saline conditions effectively promotes tomato plants' growth, thereby mitigating the negative impacts of salt stress.

Preparation of Self-microemulsion Solids of Kaempferia galanga (L.) Volatile Oil and Its Effect on Rats with Gastric Ulcer.

Kaempferia galanga volatile oil (KVO), the main effective component of the medicinal plant Kaempferia galanga L., possesses a variety of pharmacological activities such as anti-inflammatory, antioxidant, and anti-angiogenic activities and has therapeutic potential for gastric ulcer (GU). However, poor solubility as well as instability limits the clinical application of KVO. In this study, K. galanga volatile oil self-microemulsion solids (KVO-SSMEDDS) were prepared to improve its bioavailability and stability, and the therapeutic effects were evaluated in a rat model with GU. The ratio of oil phase, emulsifier, and co-emulsifier in the KVO-SMEDDS prescription were optimized by plotting the pseudo-ternary phase diagram with the star point design-response surface method. Based on the optimal prescription, self-microemulsifying drug delivery system (SMEDDS) was prepared as solid particles (S-SMEDDS). The prepared KVO-SSMEDDS had a rounded and non-adhesive appearance, formed an O/W emulsion after dissolution in water, and had a uniform particle size distribution with good stability and solubility. It was administered to GU model animals, and the results showed that a certain dose of KVO-SSMEDDS solution could increase the content of gastric mucosal protective factors PGE2, TGF-α, and EGF in gastric tissues and serum, and the expression of inflammatory factors IL-8 and TNF-α was downregulated. Meanwhile, the expression of the NF-κB/COX-2 pathway proteins was inhibited. In conclusion, the prepared KVO-SSMEDDS has good dispersion, solubility, and stability and has a therapeutic effect on rats with GU.

Process Optimization for the Bioinspired Synthesis of Gold Nanoparticles Using Cordyceps militaris, Its Characterization, and Assessment of Enhanced Therapeutic Efficacy.

The promising therapeutic implications of nanoparticles have spurred their development for biomedical applications. An eco-friendly methodology synthesizes gold nanoparticles using Cordyceps militaris, an edible mushroom (Cord-Au-NPs), using a quality-by-design approach (central composite design). UV-visible spectroscopy analysis revealed an absorption peak at 540-550 nm, thus confirming the synthesis of gold nanoparticles. Cord-Au-NPs have a crystalline structure, as evidenced by the diffraction peaks. The zeta potential value of -19.42 mV signifies the stability of Cord-Au-NPs. XRD study shows gold facets and EDX analysis revealed a strong peak of spherical nanoparticles in the gold region with a mean particle size of 7.18 nm and a polydispersity index of 0.096. The obtained peaks are closely associated with phenolic groups, lipids, and proteins, as examined by FTIR, suggesting that they function as the reducing agent. Cord-Au-NPs exhibited dose-dependent antioxidant, antidiabetic, and antibacterial activity. The method is eco-friendly, nontoxic, less time-consuming, and does not use synthetic materials, leading to higher capabilities in biomedical applications.

Chemometric assisted natural DES based VA-DLLME-LC-MS/MS method for the quantitative determination of Garcinol in biofluids/tissues: A practical application to pharmacokinetics and biodistribution studies.

Garcinol (GAR) is a polyisoprenylated benzophenone obtained from Garcinia indica used as anti-oxidant and anti-inflammatory in traditional medicine and due to these activities, it possesses anticancer properties. It is considered to be a next generation epigenetic drug. A green solvent based analytical method which is efficient, sophisticated, and highly enriched has been developed for the quantitative analysis of GAR in biological samples (plasma, liver, kidney and spleen) with the use of deep eutectic solvent (DES) for its extraction. A series of 23 DESs were synthesized and out of which, Thymol (Th)-Terpeniol (T), 2:1 molar ratio with a more hydrophobic environment and high interaction efficiency between GAR and DES was identified for the better extraction from mice plasma and tissue samples. The Design of Experiment approaches like placket-burmann design and central composite design were used to optimize the method conditions. The method validation characteristics, such as limit of detection (0.193-0.237 ng/mL), limit of quantification (0.644-0.697 ng/mL), lower limit of quantification (0.5 ng/mL), broad range of linearity with R2 (0.9994-0.9997) with a percent recovery not less than 87% was observed, which are well within the acceptance criteria for a bioanalytical method. The enrichment factor is upto 53-60 folds, with high extraction efficiency (89-97%). The measurement uncertainty was estimated with an expanded uncertainty ranged between 10.9%-19.0%. The method developed and validated was effectively applied to examine the pharmacokinetic and biodistribution patterns for GAR in mice.

Quality-by-design-based development of ultradeformable nanovesicular transgelosome of standardized Piper longum extract for melanoma.

Background: Melanoma is the most aggressive and deadly form of skin cancer. The stratum corneum of the skin is a major obstacle to dermal and transdermal drug delivery. Ultradeformable nanovesicular transferosome has the capacity for deeper skin penetration and its incorporation into hydrogel forms a transgelosome that has better skin permeability and patient compliance. Method: Here, the quality-by-design-based development and optimization of nanovesicular transgelosome of standardized Piper longum fruit ethanolic extract (PLFEE) for melanoma therapy are reported. Results: Compared with standardized PLFEE-loaded plain gel, the transgelosome displayed optimal pharmaceutical properties and improved ex vivo skin permeability and in vivo tumor regression in B16F10 melanoma-bearing C57BL/6 mice. Conclusion: The results reflect the potential of transgelosome for melanoma therapy.

Melanoma is a deadly form of skin cancer that originates from melanocytes in the skin. Skin is a major barrier to drug delivery. Transferosome is a liquid nanoformulation that has the capacity for deeper skin penetration. The transferosome was prepared from standardized Piper longum fruit ethanolic extract (PLFEE) and loaded into gel to form a transgelosome for improved skin application and patient compliance. Compared with extract-loaded plain gel, the transgelosome showed good pharmaceutical properties with better activity in melanoma (B16F10)-bearing female C57BL/6 mice. The therapeutic activity of the standard anticancer drug dacarbazine was improved with the prepared PLFEE transgelosome.

Utilization of wild Cressa cretica biomass for pectinase production from a halo-thermotolerant bacterium.

Halophytes are the native inhabitants of saline environment. Their biomass can be considered as a potential substrate for the production of microbial enzymes. This study was intended at feasible utilization of a halophytic biomass, Cressia cretica, for pectinase production using a halo- and thermo-tolerant bacterium, Bacillus vallismortis MH 10. The data from fractionation of the C. cretica biomass revealed presence of 17% pectin in this wild biomass. Seven different factors (temperature, agitation, pH, inoculum size, peptone concentration, substrate concentration, and incubation time) affecting pectinase production using C. cretica were assessed through a statistical tool, Plackett-Burman design. Consequently, two significant factors (incubation time and peptone concentration) were optimized using the central composite design. The strain produced 20 IU mL-1 of pectinase after 24 h under optimized conditions. The enzyme production kinetics data also confirmed that 24 h is the most suitable cultivation period for pectinase production. Fourier transform infrared spectroscopy and scanning electron microscopy of C. cretica biomass ascertained utilization of pectin and structural changes after fermentation. The purification of pectinase by using DEAE column yielded specific activity and purification fold of 88.26 IU mg-1 and 3.2, respectively. The purified pectinase had a molecular weight of >65 kDa. This study offers prospects of large-scale production of pectinase by halotolerant strain in the presence of economical and locally grown substrate that makes the enzyme valuable for various industrial operations.

Response surface model to illustrate the benefits of tryptophan, melatonin, and N,N-dimethylglycine in quail chicks exposed to aflatoxin B1.

A dose-response assay in a central composite design platform was conducted to investigate the responses (performance, immunity, and meat quality) of quail chicks to dietary tryptophan (Trp), melatonin (MEL), and N,N-dimethylglycine (DMG) exposed to aflatoxin B1 (AFB1). A total of 1,275 quail chicks were randomly allotted to 85-floor pens consisting of 17 treatments with 5 replicates and 15 birds per each pen. Dietary MEL and DMG had a different effect on growth rate and interacted with dietary Trp and AFB1 during the first 4 wk of age, while their effect disappeared at the last week of the experiment. Dietary Trp and AFB1 were only significant on the gain of quail chick after d 28 of the assay. During the second and third weeks of age, the reduction in feed intake caused by AFB1 attenuated by dietary MEL and DMG and dietary Trp profoundly affects feed intake in the last 2 wk of the experiment. Dietary MEL and DMG were effective on feed conversion ratio (FCR) during the second and third weeks of age. AFB1 decreased breast meat yield (BMY) and thigh meat yield (TMY), but the inclusion of either MEL or DMG removed the adverse effects of AFB1. Dietary Trp increased BMY, but it did not affect TMY. Increasing dietary Trp linearly increased the Lactobacillus bacteria (LAB) population, and AFB1 negatively impacts the LAB population. The inclusion of dietary DMG removed that negative effect on LAB. Although AFB1 decreased the antibody production against SRBC-antigen, increasing dietary Trp in intoxicated quails increased the plasma antibody in SRBC-challenged birds. At low levels of dietary Trp (0.15-0.19%), the addition of DMG increased malondialdehyde (MDA) production while increasing Trp reversed this adverse situation. In conclusion, these supplements may interact with AFB1 in younger chicks, and dietary Trp and AFB1 have a significant impact on the growth performance of quail chicks during the fifth and sixth week of age.

Sustainable extraction of ligustilide and ferulic acid from Angelicae Sinensis Radix, for antioxidant and anti-inflammatory activities.

The 2030 Agenda for Sustainable Development envisions a rational use of energy and resources in all technological processes. However, in the extraction methods of compounds from medicinal plants and herbs, there is an urgent to reduce the use of organic solvents and increase the energy efficiency of these methods. Therefore, a sustainable extraction method (enzyme and ultrasonic co-assisted aqueous two-phase extraction, EUA-ATPE) of simultaneous extraction and separation of ferulic acid and ligustilide from Angelicae Sinensis Radix (ASR) was developed by integrating enzyme-assisted extraction (EAE) with ultrasonic-assisted aqueous two-phase extraction (UAE- ATPE). The effects of different enzymes, extraction temperature, pH, ultrasonic time, liquid-to-materials ratio, etc., were optimized by single-factor experiments and central composite design (CCD). Under the optimum conditions, the highest comprehensive evaluation value (CEV) and extraction yield were obtained by EUA-ATPE. Furthermore, recovery (R), partition coefficient (K), and scanning electron microscopy (SEM) analysis revealed that enzyme and ultrasonic treatment improved mass transfer diffusion and increased the degree of cell disruption. Besides, the EUA-ATPE extracts have shown great antioxidant and anti-inflammatory activity in vitro. Finally, compared to different extraction methods, EUA-ATPE achieved higher extraction efficiency and higher energy efficiency due to the synergistic effect between EAE and UAE-ATPE. Therefore, the EUA-ATPE provides a sustainable method for extracting bioactive compounds from medicinal plants and herbs, contributing to Sustainable Development Goals (SDG), including SDG-6, SDG-7, SDG-9, SDG-12, and SDG-15.

Intranasal Delivery of a Silymarin Loaded Microemulsion for the Effective Treatment of Parkinson's Disease in Rats: Formulation, Optimization, Characterization, and In Vivo Evaluation.

A mucoadhesive microemulsion of lipophilic silymarin (SLMMME) was developed to treat Parkinson's disease (PD). Optimization of the SLM microemulsion (ME) was performed using Central Composite Design (CCD). The composition of oil, surfactant, co-surfactant, and water was varied, as per the design, to optimize their ratio and achieve desirable droplet size, zeta potential, and drug loading. The droplet size, zeta potential, and drug loading of optimized SLMME were 61.26 ± 3.65 nm, -24.26 ± 0.2 mV, and 97.28 ± 4.87%, respectively. With the addition of chitosan, the droplet size and zeta potential of the developed ME were both improved considerably. In vitro cell toxicity investigations on a neuroblastoma cell line confirmed that SLMMME was non-toxic and harmless. In comparison to ME and drug solution, mucoadhesive ME had the most flow through sheep nasal mucosa. Further, the in vitro release showed significantly higher drug release, and diffusion of the SLM loaded in MEs than that of the silymarin solution (SLMS). The assessment of behavioral and biochemical parameters, as well as inflammatory markers, showed significant (p < 0.05) amelioration in their level, confirming the significant improvement in neuroprotection in rats treated with SLMMME compared to rats treated with naïve SLM.

Quality by design-based capillary electrophoresis method development for the quantitative analysis of four iridoid compounds in Gentiana macrophylla Radix.

In this study, the capillary electrophoresis-photodiode array detector was employed for the analysis of four iridoid compounds in Gentiana macrophylla Radix (RGM), and the method was optimized based on the concept of analytical quality by design (AQbD). The peak areas relative standard deviation (n = 3) and resolution of the four analytes were selected as critical method attributes. Fractional factorial design test combined with Pareto analysis were employed to screen critical method parameters (buffer concentration, pH, sodium dodecyl sulfate [SDS] micelle concentration, temperature, and voltage). Subsequently, three main factors (buffer concentration, buffer pH, and SDS concentration) were selected by central composite design test for constructing the design space. The optimal separation conditions as follows: capillary column (50.2 cm × 50 µm, detection length 40 cm). Working background electrolyte consisted of 51 mmol/L borax solution (pH = 9.47) and 40 mmol/L SDS. The samples were injected by pressure (5 s at 0.5 psi) and the detection was performed at 254 nm. Applied voltage was 20 kV and column temperature was 23°C. The developed method is rapid and reliable for the quantitative analysis of four iridoid compounds in RGM, providing a reference for the application of AQbD concept in the analysis of natural products.

Optimisation of operating conditions during coagulation-flocculation process in industrial wastewater treatment using Hylocereus undatus foliage through response surface methodology.

In exploring the application of natural coagulants in industrial wastewater treatment, plant-based coagulants have been gaining more interests due to their potential such as biodegradability and easy availability. Hylocereus undatus foliage as a plant-based coagulant has been proven to be efficient during the coagulation-flocculation process; however, limited research has been reported focusing only on palm oil mill effluent (POME) and latex concentrate wastewater. In addition, no previous study has been carried out to determine the performance evaluation of Hylocereus undatus foliage in treating different types of wastewater incorporating different operating conditions using optimization techniques. Hence, this study employed response surface methodology (RSM) in an attempt to determine the performance evaluation of the coagulant in paint wastewater treatment. Four independent factors such as the pH value, coagulant dosage, rapid mixing speed and temperature were chosen as the operating conditions. Three water parameters such as turbidity, chemical oxygen demand (COD) and suspended solids (SS) were chosen as responses in this study. Results revealed that through central composite design (CCD) via Design Expert software, the optimum conditions were achieved at pH 5, coagulant dosage of 300 mg/L, rapid mixing speed of 120 rpm and temperature at 30 °C. The experimental data was observed to be close to the model predictions with the optimum turbidity, COD and SS removal efficiencies found to be at 62.81%, 59.57% and 57.23%, respectively.

Comparative study of response surface methodology and artificial neural network for optimization of process parameters for synthesis of gold nanoparticles by Desmostachya bipinnata extract.

Green synthesis of nanoparticles has gained attention due to its eco-friendly and sustainable approach to synthesize nanoparticles at a reduced cost. Artificial neural network (ANN) and response surface model (RSM) are important to reduce experimental efforts in nanoparticle synthesis. In this work, optimization of gold nanoparticle synthesis by Desmostachya bipinnata extract was performed using the volume of plant extract, concentration of auric chloride, reaction time, pH, and temperature as process parameters, and the output was absorbance. The experimental design was obtained from RSM and the model was optimized further using ANN. Thirty-two experimental runs generated by RSM were performed and the results obtained experimentally were compared with those generated by RSM and ANN. Different algorithms of ANN were tested to obtain the best one. The optimization studies resulted in a maximum response for 20th run with 15 ml, 2.5 mM, 45 min, 7, and 40 °C as parameters. Optimized input parameters obtained by RSM were 10 ml, 2 mM, 30 min, 6, and 30 °C. The formation of gold nanoparticles was confirmed by UV spectroscopy, XRD, and SEM. Different algorithms of ANN, such as leven marquardt, scaled conjugate gradient, and bayesian network were used. Leven marquardt algorithm was found to be the most suitable algorithm for the current study.

Inoculum-to-substrate ratio and solid content effects over in natura spent coffee grounds anaerobic digestion.

Coffee is the second most traded commodity worldwide, and its production is associated with the generation of a large number of residues, which are underused and disposed of in landfills. Notably, the coffee industry annually generates approximately 6 million tons of industrial spent coffee ground (ISCG) when extracting coffee flavorings to produce soluble coffee. That resource loss scenario has been highlighted in sustainable waste management contexts as an opportunity to improve the coffee circular economy. Despite ISCG bioconversion to methane potentially meets the waste-to-energy purposes of reducing residues disposal in landfills, decreasing greenhouse gas (GHG) emissions, and increasing renewable energy sources, data about anaerobic digestion (AD) of ISCG remains quite restricted. That limitation becomes more apparent owing to the lack of data focusing on AD key parameters for ISCG as substrate. This study assessed the influence of inoculum-to-substrate ratio (ISR) and the solid content influences on mesophilic (37 °C) ISCG-AD throughout the Response Surface Methodology (RSM) and Central Composite Design (CCD). Results revealed that both factors, ISR and solid content, should be kept above a certain threshold of 0.5 and 6.0 gTVS L-1 to ensure experimental reliability, as well as reproductively and above 1.0 and 8.0 gTVS L-1 to avoid underestimation on the MY potential achieved. Concerning ISCG-AD kinetics, the quadratic model optimum condition was at 1.36 and 14.83 gTVS L-1 for ISR and solid content, respectively. This optimum range for ISR and solid content could guide further development of process configurations for mono- and co-digestion of ISCG, avoiding underestimation of the MY potential and extended incubation periods.

Analysis of mixed plastic pyrolysis oil by comprehensive two-dimensional gas chromatography coupled with low- and high-resolution time-of-flight mass spectrometry with the support of soft ionization.

According to the annual production of plastics worldwide, in 2020 about 370 million tons of plastic were produced in the world. Chemical recycling, particularly pyrolysis of plastic wastes, could be a valuable solution to resolve these problems and provide an alternative pathway to produce "recycled" chemical products for the petrochemical industry. Nevertheless, the pyrolysis oils need a detailed characterization before the upgrading test to re-use them to generate new recycled products. Multidimensional gas chromatography coupled with both low- and high-resolution time-of-flight mass spectrometers was employed for a detailed investigation among and within different chemical classes present in bio-plastic oil. The presence of several isomeric species as well as homologs series did not allow a reliable molecular identification, except for a few compounds that showed both MS similarity >800/1000 and retention index within ±20. Indeed, the identification of several isomeric species was assessed by high-resolution mass spectrometry equipped with photoionization interface. This soft ionization mode was an additional filter in the identification step allowing unambiguous identification of analytes not identified by the standard electron ionization mode at 70 eV. The injection method was also optimized using a central composite design to successfully introduce a wide range of carbon number compounds without discrimination of low/high boiling points.

Ultrasound-assisted enzymatic extraction of Scutellaria baicalensis root polysaccharide and its hypoglycemic and immunomodulatory activities.

Scutellaria baicalensis is a medicinal plant possessing abundant bioactive polysaccharides. This study aimed to optimize the ultrasound-assisted enzymatic extraction of S. baicalensis root polysaccharide (SRP) and investigate its hypoglycemic and immunomodulatory activities. The optimal extraction conditions found in this study were as follows: cellulase concentration 165.6 U/mL, temperature 57.3 °C, liquid-solid ratio 44.8 mL/g, time 50 min, and ultrasonic power 225 W; with the yield reached up to 12.27 %. The ion exchange and gel filtration chromatographies were used to obtain a purified SRP. The carbohydrate content of SRP was 85.09 %, with a relatively high content of uronic acids (11.27 %). The SRP had a molecular weight of 89.7 kDa and was composed of eight monosaccharides. The inhibitory activity of SRP against α-amylase and α-glucosidase was determined. It was revealed that SRP could effectively inhibit these two enzymes with IC50 values of 1.23 and 0.63 mg/mL, respectively. Finally, the immunomodulatory effect of SRP on the dendritic cell activation was investigated, and the expressions of MHC II, CD80, CD86, and CD40 increased by 1.56, 1.96, 1.75, and 1.70 times, respectively, by the SRP treatment. This work will provide a foundation for SRP's efficient extraction and utilization for diabetes and immune therapy.