The effect of clay therapy on hopelessness and depression levels in chronic stroke patients in addition to physical therapy.

BACKGROUND: Clay art therapy can be used as part of rehabilitation for chronic stroke patients. OBJECTIVE: The objective of this study is to examine the effect of clay therapy on hopelessness and depression levels in chronic stroke patients who receive physical therapy and compare them to patients who only receive physical therapy. METHODS: This randomized controlled study was conducted between August 1st - September 28th, 2022 in Turkiye, with 60 patients who agreed to participate in the study and met the inclusion criteria, which were chronic stroke patients who received physical therapy. The patients were divided into two groups (30 in the experimental group, 30 in the control group) with the control group receiving only their routine physical therapy and rehabilitation (5 days a week, 40 sessions in total), while the experimental group received their routine physical therapy and rehabilitation program as well as clay therapy twice a week, 60 min per session, for 8 weeks. Demographic information of all the participants was recorded, and the Beck Depression Inventory and Beck Hopelessness Scale were administered before and after treatment. RESULTS: The patients' depression posttest scores (t(58) = -11.386; p = 0.000 < 0,05), and hopelessness posttest scores (t(58) = -10.247; p = 0.000 < 0,05) differed significantly based on their groups. The control group's depression posttest scores (x¯ =25,033) and hopelessness posttest scores (x¯ =15,000) were higher than the experimental group's depression posttest scores (x¯ =9,067) and hopelessness posttest scores (x¯ =8,000). The control group's feeling about the future posttest scores (x¯ =2,967) were higher than the experimental group's posttest scores (x¯ =0,967). The control group's loss of motivation posttest scores (x¯ =6,400) were higher than the experimental group's posttest scores (x¯ =2,667). CONCLUSION: It was seen that clay therapy, in addition to physical therapy, was effective in reducing depression and hopelessness in chronic stroke patients.

Improving feed intake and rumen fermentation in lambs using mixed-dimensional attapulgite clay to adsorb naturally occurring mycotoxins.

This experiment was conducted to evaluate the effects of including a mixed-dimensional attapulgite clay (MDA) into a naturally moldly diet for Hu lambs. Fifty male Hu lambs with similar initial body weight (28.24 ±â€…1.80 kg) were randomly allocated into five dietary treatments: a basal diet containing naturally occurring mycotoxins with 0, 0.5, 1.0, and 2.0 kg/t MDA, and basal diet with a commercial mycotoxin adsorbent Solis with montmorillonite as the major component at 1 kg/t. Both MDA and Solis increased average daily gain (ADG) and dry matter intake (DMI; P ≤ 0.004), and there was no difference in growth performance between MDA and Solis (P ≥ 0.26). The final body weight, DMI, and ADG were linearly increased with increasing MDA supplementation (P < 0.01). Lambs treated with both MDA and Solis demonstrated greater apparent digestibility of dry matter (DM), organic matter (OM), and energy compared with the control group (P ≤ 0.03), and there were no differences in nutrient digestibilities between MDA and Solis (P ≥ 0.38). Digestibility of CP was linearly increased with the increasing MDA supplementation (P = 0.01). Neither MDA nor Solis affected rumen total volatile fatty acid (TVFA) concentration (P ≥ 0.39), but decreased the acetate-to-propionate ratio and molar proportion of n-butyrate (P ≤ 0.01), and MDA also increased the concentration of ammonia (P = 0.003). Besides, increasing MDA supplementation linearly reduced the acetate-to-propionate ratio and molar proportion of n-butyrate (P = 0.01), but linearly and quadratically increased the concentration of ammonia (P ≥ 0.003). These results showed that the incorporation of MDA into a naturally moldy diet of Hu lambs yielded comparable results to the Solis product, with higher growth performance and nutrient digestibility but lower acetate-to-propionate ratio observed. In conclusion, including ≥ 1 kg/t of MDA in high mycotoxin risk diets for growing lambs improves feed intake and rumen fermentation.

The issue of mycotoxin-contaminated animal feed has consistently presented a significant challenge in relation to animal health and production. The mixed-dimensional attapulgite clay (MDA) has been proven effective in binding polar mycotoxins such as aflatoxin, while also effectively adsorbing hydrophobic or weakly polar mycotoxins such as zearalenone (ZEN) and ochratoxin. Therefore, this study was undertaken to assess the impact of MDA inclusion in mycotoxin-contaminated diets on performance and rumen fermentation variables in lambs. The results indicated that MDA not only significantly improved the growth performance and nutrient digestibility of Hu lambs but also enhanced the molar proportion of propionate and ammonia concentration, and reduced the acetate to propionate ratio and the molar proportion of n-butyrate.

Characterization of textile effluent treatment plant sludge and its industrial application in fired clay bricks with health risk assessment.

The textile industry in Bangladesh faces environmental and health challenges due to the disposal of solid waste from Effluent Treatment Plants (ETPs). To address this issue, a study was conducted using soil from a brick industry near Dhaka, amending it with varying amounts of dry sludge to create clay bricks. The original soil had a loam texture and medium plasticity. The research found that adding 9 wt% of sludge resulted in Grade A commercial bricks with a compressive strength of 15.33 MPa and water absorption of 13.33 wt%, meeting BDS 208 standards. However, these sludge-incorporated bricks experienced more shrinkage during the burning process due to organic content, requiring additional soil to maintain conventional dimensions. Also, to assess the health hazards of these sludge-incorporated bricks, a leaching test was performed, revealing that no toxic heavy metals (Pb, Cd, Cr, Cu, Ni, and Zn) in the leachate exceeded the limits set by the United States Environmental Protection Agency (USEPA). The study indicates that textile ETP sludge can serve as a sustainable raw material for bricks, potentially reducing the environmental burden caused by textile sludge disposal by 28.75%. This innovative approach offers a promising solution to both environmental and health concerns associated with textile waste in Bangladesh's industrial sector.

Reactivity of Calcined Clays as SCM-A Review.

Calcined mixed clays are one of the most promising alternative supplementary cementitious materials. However, their standardized use is difficult due to the wide range of compositions of the raw materials. The reactivity potential of different clays can hardly be estimated on the basis of simple characteristics so far. This review aims to identify and compile the factors that determine reactivity. At first, an overview of the methods to evaluate reactivity is presented in order to provide a definition of this term. Subsequently, the reactivity-determining factors are compiled and subdivided into the characteristics of the raw material (chemical and mineralogical composition), the parameters of calcination (furnace type, temperature, grain size, retention time, and cooling), and the characteristics of the calcined material (physical properties and amorphous phase). Interrelations are discussed qualitatively. In the second step, a quantitative literature analysis was conducted to quantify correlations between the different factors and reactivity. However, since the characterization methods in the literature are very different, the data can hardly be analyzed quantitatively. Consequently, this paper points out what information is needed to conduct profound, comparable studies to evaluate the reactivity potential of clays.

Differential Adsorption of Dissolved Organic Matter and Phosphorus on Clay Mineral in Water-Sediment System.

Lake sediments connection to the biogeochemical cycling of phosphorus (P) and carbon (C) influences streamwater quality. However, it is unclear whether and how the type of sediment controls P and C cycling in water. Here, the adsorption behavior of montmorillonite (Mt) with different interlayer cations (Na+, Ca2+, or Fe3+) on dissolved organic matter (DOM) and P was investigated to understand the role of Mt in regulating the organic carbon-to-phosphate (OC/P) ratio within freshwater systems. The adsorption capacity of Fe-Mt for P was 3.2-fold higher than that of Ca-Mt, while it was 1/3 lower for DOM. This dissimilarity in adsorption led to an increased OC/P in Fe-Mt-dominated water and a decreased OC/P in Ca-Mt-dominated water. Moreover, an in situ atomic force microscope and high-resolution mass spectrometry revealed molecular fractionation mechanisms and adsorptive processes. It was observed that DOM inhibited the nucleation and crystallization processes of P on the Mt surface, and P affected the binding energy of DOM on Mt through competitive adsorption, thereby governing the interfacial P/DOM dynamics on Mt substrates at a molecular level. These findings have important implications for water quality management, by highlighting the role of clay minerals as nutrient sinks and providing new strategies for controlling P and C dynamics in freshwater systems.

Oxidation of Biogenic U(IV) in the Presence of Bioreduced Clay Minerals and Organic Ligands.

Bioreduction of soluble U(VI) to sparingly soluble U(IV) is proposed as an effective approach to remediating uranium contamination. However, the stability of biogenic U(IV) in natural environments remains unclear. We conducted U(IV) reoxidation experiments following U(VI) bioreduction in the presence of ubiquitous clay minerals and organic ligands. Bioreduced Fe-rich nontronite (rNAu-2) and Fe-poor montmorillonite (rSWy-2) enhanced U(IV) oxidation through shuttling electrons between oxygen and U(IV). Ethylenediaminetetraacetic acid (EDTA), citrate, and siderophore desferrioxamine B (DFOB) promoted U(IV) oxidation via complexation with U(IV). In the presence of both rNAu-2 and EDTA, the rate of U(IV) oxidation was between those in the presence of rNAu-2 and EDTA, due to a clay/ligand-induced change of U(IV) speciation. However, the rate of U(IV) oxidation in other combinations of reduced clay and ligands was higher than their individual ones because both promoted U(IV) oxidation. Unexpectedly, the copresence of rNAu-2/rSWy-2 and DFOB inhibited U(IV) oxidation, possibly due to (1) blockage of the electron transport pathway by DFOB, (2) inability of DFOB-complexed Fe(III) to oxidize U(IV), and (3) stability of the U(IV)-DFOB complex in the clay interlayers. These findings provide novel insights into the stability of U(IV) in the environment and have important implications for the remediation of uranium contamination.

CoFe2O4 modified bentonite-based mixed matrix loose nanofiltration membranes for effective wastewater treatment.

Mixed-matrix membranes (MMMs) with an ideal polymer/hydrophilic flux enhancer interface considerably recuperates the separation and purification performance of membrane. In this direction, a novel CoFe2O4 functionalized natural clay-bentonite (CoFe2O4@BT) material as a compatible flux enhancer was synthesized for preparation of mixed matrix based in polyethersulfone (PES) matrix. Here, the influences of CoFe2O4@BT on the morphology and performance of the MMMs membranes were systematically investigated using various analytical techniques. Meanwhile, the water flux and sepration eficiency of the CoFe2O4@BT-PES membranes significantly enhanced due to the incorporation of CoFe2O4@BT that altered hydrophilicity, pore and surface characteristic features. The water flux as well as separation efficiency range up to 95%, 94.69%, 94.16% of Congo red (CR), Crystal violet (CV), and humic acid (HA) respectively. Meanwhile, the fouling parameters demonstrated that the CoFe2O4@BT-PES membranes exhibited better antifouling property in the long term experiment comparing with commercial polyamide membrane. CoFe2O4@BT material incorporated membranes showed less decline ratio and a better recovery ratio. The high rejection of dyes with a high permeation flux of the newly designed membranes indicated an amazing possibility for dye purification. In this study, a potential dye mechanism for composite membranes impacted by synthetic CoFe2O4@BT was also put forth. Within the context of application considerations for environmental protection, new materials stock in membranes show good potential for the separation of different organic contaminants.

Establishment of the mechanism of purification and levigation of green chemistry-assisted biocomposites of red ochre (Gairika): synthesis, characterization, and antibacterial, prebiotic, antioxidant, and antacid activities of the traditional Ayurvedic medicine Laghu Sutashekhara Rasa.

Gairika (red ochre) has a long history of influencing human civilization. Gairika is a rich source of nutrients used for reproductive and brain health. Gairika is mentioned as an antacid drug in Indian Ayurvedic medicine under Laghu Sutashekhara Rasa (LSR). However, a detailed study on LSR has not been reported to date. In the present study, LSR was prepared, and a pharmaceutical SOP (standardization procedure) was reported to obtain batch-to-batch reproducibility. LSR was characterized using FTIR, XRD, SEM-EDX, and TGA analyses. LSR was tested in vitro for its antacid activity. Advanced instrumentation revealed that LSR formation produced symmetrical particles (5-8 µm) with kaolin, kaolinite, quartz, goethite, and hematite, along with the phytoconstituents of Goghrita (clarified cow's butter), Shunthi, and Nagawalli, as confirmed by GC-MS/MS analysis. The FTIR study revealed the formation of a chelating complex of goethite and hematite along with their phytoconstituents. XRD analysis confirmed the presence of kaolin, kaolinite, quartz, goethite, and hematite. Using in vitro antacid experiments, LSR and Shunthi demonstrated significant antacid activity as compared to antacid drugs and standards in the market, such as CaCO3. The DPPH assay revealed IC50 values of 12.16 ± 1.23 mg/mL, which is 0.0029 of Trolox-equivalent antioxidant activity. The inhibition (18 ± 4 mm) against pathogens (S. aureus, E. coli, P. aeruginosa, and B. subtilis) and the prominent growth of gut microbiota-supported strains (S. boulardii, L. paracasei, and L. plantarum) observed on LSR formulation were indicative of LSR application as a prebiotic. Here, the mechanism of purification and levigation mentioned in the classical literature of LSR was established. Overall, purification of Gairika with cow ghee and levigation with Nagawalli may enhance the solubility, bioavailability, and shelf-life of LSR through hydration and co-crystallization mechanisms. This is the first comprehensive report on the pharmaceutical validation of LSR and its characterization. The results of the present study could contribute to the development and reliable reproduction of LSR and the utility of environmental red ochre as a medicine in combination with Shunthi (Zingiber officinale Roxb.), as prescribed under Indian Ayurvedic medicine.

Ammonium concentration in stream sediments resulting from decades of discharge from a wastewater treatment plant.

A study of ammonium pollution in the sediments of a stream that receives wastewater treatment plant (WWTP) discharge has been carried out. It is urgently necessary to find environmental indicators that can help prevent and detect potential contamination of water, as water is an increasingly scarce resource. To understand the behaviour of ammonium ions introduced by a historical (50-year) contamination process, vertical boreholes were drilled in the stream banks to depths between 30 and 120 cm. Moisture, pH, ammonium (soluble and exchangeable), and clay fraction content were analysed. The variation profile of these parameters was evaluated as a function of depth to determine factors related to the distribution of ammonium in several locations along the stream banks. The ammonium concentration was asymmetrically distributed among samples collected in near-surface locations, with ammonium concentrations between 0.3048 mmol/kg soil and 0.0007 mmol/kg soil. Ammonium was typically concentrated at sediment depths of 30-40 cm, which also exhibited the highest clay fraction content. High positive correlations were detected (r > 0.8; p < 0.0001) among the different ammonium variables (exchanged and dissolved species). No contamination effect was observed below 60-70 cm depth, which was due to ammonium retention in a natural barrier layer of clayey sediment. The clays in our study area (previously identified as smectite, a 2:1 sheet silicate) were able to control the contamination by retaining ammonium in the interlayers, which retarded nitrification. It is suggested that clay could serve as a geo-indicator of ammonium pollution evolution.

Olive mill wastewater treatment using natural adsorbents: phytotoxicity on durum wheat (Triticum turgidum L. var. durum) and white bean (Phaseolus vulgaris L.) seed germination.

This research was undertaken to optimize the phenolic compound removal from Olive Mill Wastewater (OMW) by sawdust and red clay as natural adsorbents. Fractional factorial experimental design at 25-1 was used in order to optimize the experimental conditions for high removal efficiency. Statistics ANOVA analysis, Fisher's test, and Student's test suggested that the adsorbent dose has the most significant influence on polyphenol removal for both adsorbents. The maximum removal of polyphenols by sawdust reached 49.6% at 60 °C by using 60 g/L of adsorbent dose, pH 2, reaction time of 24 h, and agitation speed of 80 rpm. Whereas, for red clay, 48.08% of polyphenols removal was observed under the same conditions for sawdust except the temperature of 25 °C instead of 60 °C. In addition, the thermodynamic parameters suggested spontaneous process for both adsorbents, endothermic for the sawdust and exothermic for red clay. Furthermore, the phytotoxicity effect of OMW on durum wheat (Triticum turgidum L. var. durum) and white bean (Phaseolus vulgaris L.) seed germination was investigated. The obtained results showed that the untreated OMW inhibited the seed germination of T. turgidum and P. vulgaris seeds. OMW treatment with red clay followed by dilution (95% water) resulted in 87 and 30% germination of P. vulgaris and T. turgidum, respectively. While, the treatment of OMW with sawdust and dilution at 95% resulted in 51 and 26% germination of P. vulgaris and T. turgidum, respectively.

Spectroscopic Investigation of Phosphorus Mineralization as Affected by the Calcite-Water Interfacial Chemistry.

The mineralization and bioavailability of phytic acid, the predominant organic phosphorus (OP) species in many soils, have generally been rendered limited due to its interaction with soil minerals. In particularly calcareous and neutral to slightly alkaline soils, phytic acid is known to actively react with calcite, although how this interaction affects phytic acid mineralization is still unknown. This study, therefore, investigated the mechanisms regarding how the calcite-water interface influences phytic acid mineralization by phytase, at pHs 6 and 8 using in situ spectroscopic techniques including solution nuclear magnetic resonance and attenuated total reflection Fourier transform infrared spectroscopy. The findings indicated a pH-specific effect of the calcite-water interface. Inhibited phytase activity and thus impaired phytic acid mineralization were induced by calcite at pH 6, while the opposite effect was observed at pH 8. How the interaction between phytic acid and calcite and between phytase and calcite differed between the two pH values contributed to the pH-specific effect. The results demonstrate the importance of soil pH, enzyme-, and OP-clay mineral interactions in controlling the mineralization and transformation of OP and, consequently, the release of phosphate in soils. The findings can also provide implications for the management of calcite-rich and limed soils.

Changes in mineral fraction and pore morphology of coal with acidification treatment: contribution of clay minerals to methane adsorption.

The accurate calculation of the contribution which provided by clay minerals in coal on methane adsorption not only bares a significant importance for evaluating the effectiveness of acid stimulation in improving permeability and estimating the coalbed methane reserves but also serves a guide for the governance and utilization of methane resources. In this study, hydrochloric acid (HCl) and hydrofluoric acid (HF) were used to remove specific minerals in Qingdong coal samples. We firstly analyzed the mineral compositions of coal samples with different acidification treatments based on the X-ray diffraction (XRD) experiments, together with analysis of the changes in pore morphology and adsorption capacity. The results showed that acidification did not significantly change the shape of the pores, which remained slit-/plate-like pore. However, the altered adsorption capacity of the coal samples was attributed to changes in pore structure and mineral distribution. Acid erosion of mesopores promoted the transition from mesopores to macropores, contributing to an increase of 8.4% and 24.36% in the percentage of macropores in coal samples treated with HCl and HF, respectively. Fractal dimension D1 grew from 2.2193 to 2.3888 and 2.2572, respectively, but D2 decreased from 2.6146 to 2.5814 and 2.5433, indicating an increment in pore surface roughness and a simplification of the pore structure. The mineral richness of the coal seams should be taken into consideration when applying acid stimulation to increase permeability due to that the acidification products may block the passage of gas migration when the mineral content is slight, which can hinder gas extraction. The aim of this study is to quantitatively determine the contribution rate of clay minerals in coal to methane adsorption with a calculation method is provided by combining pore parameters and limit adsorption capacity, resulting in a contribution rate of 15%.

Microbiological and physicochemical quality enhancement of treated wastewater using raw and chemically modified clays from Sidi Bouzid region, Tunisia.

Environmental discharge of wastewater represents a source of chemical and biological pollutants. This study firstly evaluates the microbiological and physicochemical quality of treated wastewaters collected from two wastewater treatment plants (WWTPs) located in two different Tunisian cities namely Sidi Bouzid (SB) and Gafsa (G). Then, the capacity of three raw and acid/base-activated local clays to enhance the quality of wastewaters was assessed. The results indicate that the quantities of enteric bacteria (oscillating from 1.381 × 103 to 1.4 × 108 CFU/100 mL), fungi (between 1.331 × 103 and 1.781 × 104 CFU/100 mL), as well as SARS-CoV-2 (between 4.25 × 103 and 5.05 × 105 CFU/100 mL) and Hepatitis A virus RNA (form 4.25 × 103 to 7.4 × 104 CFU/100 mL) detected in effluent wastewaters were not in compliance with the Tunisian standards for both studied WWTPs. Likewise for other indicators such as electrical conductivity (ranging 4.9-5.4 mS/cm), suspended matter (145-160 g l-1), chemical oxygen demand (123-160 mg l-1), biological oxygen demand 5 (172-195 mg l-1), chloride, Total Kjeldahl nitrogen (TKN) and phosphorus contents (710, 58-66 and 9.47-10.83 mg l-1 respectively), the registered values do not agree with the set standards established for wastewater treatment. On the other hand, the pH values fitted (oscillating from 6.86 (at G) to 7.24 (at SB) with the Tunisian standards for both WWTPs. After treatment, wastewaters showed better values for the microbiological parameters, especially for the clays designed as AM and HJ1, which eliminated 100% of viruses. In addition, when acid-activated AM clays were applied, a marked improvement in the quality of physicochemical parameters was obtained, especially for suspended matter (2 and 4 g l-1 for SB and G, respectively), TKN (5.2 (SB) and 6.40 (G) mg/l), phosphorus (1.01 (SB) and 0.81 (G) mg/l). Our results open perspectives for the possibility of efficiently using these specific clays in the enhancement of the quality of treated wastewaters.

Stable microbial community in compacted bentonite after 5 years of exposure to natural granitic groundwater.

The Materials Corrosion Test (MaCoTe) at the Underground Research Laboratory in Grimsel, Switzerland, assesses the microbiology and corrosion behavior of engineered barrier components of a deep geological repository (DGR) for long-term disposal of high-level nuclear waste. Diversity and temporal changes of bentonite-associated microbial community profiles were assessed under DGR-like conditions for compacted Wyoming MX-80 bentonite (1.25 g/cm3 and 1.50 g/cm3 targeted dry densities) exposed to natural groundwater. Using culture-dependent and molecular techniques, samples taken from the outside layer of 5-year borehole modules revealed up to 66% and 23% of 16S rRNA gene sequences affiliated with Desulfosporosinus and Desulfovibrio, respectively. Putatively involved in sulfate reduction, these taxa were almost undetectable within the bentonite core. Instead, microbial profiles of the inner bentonite core were similar to uncompacted bentonite used to pack modules years earlier, and were consistent with a previously published 1-year time point, revealing no detectable microbial growth. Abundances of culturable aerobic and anaerobic heterotrophic bacteria in the uncompacted bentonite were relatively low, with less than 1,000 and 100 colony-forming units (CFUs) per gram dry weight, respectively. Nearly 5 years after emplacement, culturable heterotrophic bacterial CFUs and sulfate-reducing bacteria did not change significantly inside the bentonite core. Phospholipid fatty acid data indicated similar lipid abundance, and corresponding cell abundance estimates, for inner 5-year MaCoTe bentonite samples compared to those previously obtained for 1-year incubations. Collectively, our results provide complementary evidence for microbial stability inside highly compacted bentonite exposed to conditions that mimic engineered barrier components of a deep geological repository. IMPORTANCE The long-term safety of a deep geological repository for used nuclear fuel is dependent on the performance of the engineered and natural barriers. Microbial activity can produce chemical species that can influence the corrosion of the disposal containers for used nuclear fuel. Although previous studies have evaluated the microbiology of compacted bentonite clay within subsurface environments, these have been limited to relatively short incubations (i.e., 1 year). The current study provides a unique 5-year perspective that reinforces previous findings of growth inhibition for bentonite clay exposed to in situ subsurface conditions.

A systematic study on sustainable low carbon cement - Superplasticizer interaction: Fresh, mechanical, microstructural and durability characteristics.

As governments around the world take on ambitious construction projects, from housing to infrastructure to transportation, the demand for cement is set to rise. It is anticipated that global cement production is set to achieve a compound annual growth rate of ∼5.1% for the years 2022-2025. The negative impact of cement production on the environment, such as carbon emissions and energy consumption, is also well known. This instigates the need to look for alternative and sustainable supplementary cementitious materials (SCMs) such as Fly ash (FA), Limestone (LS), Metakaolin (MK), Ground granulated blast furnace slag (GGBFS) and Silica fume (SF) which when blended with Portland clinker result in lower carbon emissions and better end products. With expanding cement demand, the need for chemical admixtures has also increased. This comprehensive study focuses on the compatibility of commercially available superplasticizers with SCMs blended low carbon cement and their influence on fresh and hardened properties along with microstructural and durability aspects. The chemistry of superplasticizers and how it effects the hydration mechanism of blended cement are also highlighted in detail. Moreover, the effect of different types of superplasticizers, their dosage, water binder ratio, and details of experiments used by other authors are also discussed and listed. As cementitious matrix containing any kind of SCM such as FA showed better environmental performance on the basis of life cycle assessment which was due to carbon emission factor (ξi). For cement, ξi was 311.27 kg CO2-eq/t, whereas for FA it was much lower (8.70 kg CO2-eq/t). Based on this comprehensive literature review, current challenges for the utilisation of waste SCMs incorporating superplasticizers along with research gap have been identified. Apart from this, the ongoing research work on the effect of chemical and mineral admixture on Limestone-calcined clay cement (LC3) using statistical modelling to optimize the mix is also discussed. It was observed that the use of a specific type of mineral admixture with a superplasticizer inversely affected the mechanical properties like compressive strength and modulus of rupture but improved the water-binder ratio, porosity, and water absorption.

Effective stabilization of per- and polyfluoroalkyl substances (PFAS) precursors in wastewater treatment sludge by surfactant-modified clay.

The application of biosolids or treated sewage sludge containing per- and polyfluoroalkyl substances (PFAS) in agricultural lands and the disposal of sludge in landfills pose high risks to humans and the environment. Although PFAS precursors have not been regulated yet, their potential transformation to highly regulated perfluoroalkyl acids (PFAAs) may enable them to serve as a long-term source and make remediation of PFAAs a continuing task. Therefore, treating precursors in sewage sludge is even more, certainly not less, critical than treating or removing PFAAs. In this study, a green surfactant-modified clay sorbent was evaluated for its efficacy in stabilizing two representative PFAA precursors in sludge, e.g., N-ethyl perfluorooctane sulfonamido acetic acid (N-EtFOSAA) and 6:2 fluorotelomer sulfonic acid (6:2 FTSA), in comparison with unmodified clay and powdered activated carbon (PAC). Results showed N-EtFOSAA and 6:2 FTSA exhibited distinct adsorption behaviors in the sludge without sorbents due to their different physicochemical properties, such as hydrophobicity and functional groups. Among the three sorbents, the modified clay reduced the water leachability of N-EtFOSAA and 6:2 FTSA by 91.5% and 95.4%, respectively, compared to controls without amendments at the end of the experiment (47 days). Within the same duration, PAC decreased the water leachability of N-EtFOSAA and 6:2 FTSA by 60.6% and 37.3%, respectively. At the same time, the unmodified clay demonstrated a poor stabilization effect and even promoted the leaching of precursors. These findings suggested that the modified clay had the potential for stabilization of precursors, while negatively charged and/or hydrophilic sorbents, such as the unmodified clay, should be avoided in the stabilization process. These results could provide valuable information for developing effective amendments for stabilizing PFAS in sludge or biosolids. Future research should evaluate the long-term effect of the stabilization approach using actual sludge from wastewater treatment facilities.

Chemistry of Dimer Acid Production from Fatty Acids and the Structure-Property Relationships of Polyamides Made from These Dimer Acids.

While there is abundant literature on using a wide range of biomaterials to make polymers for various adhesive applications, most researchers have generally overlooked developing new adhesives from commercially available bio-based dimerized fatty acids. Some of the literature on the chemistry taking place during the clay-catalyzed dimerization of unsaturated fatty acids is generally misleading in that the mechanisms are not consistent with the structures of these dimers and a by-product isostearic acid. A selective acid-catalyzed interlayer model is much more logical than the widely accepted model of clay-catalyzed Diels-Alder reactions. The resulting dimers have a variety of linkages limiting large crystal formation either as oligomeric amides or polyamides. These highly aliphatic fatty acid dimers are used to make a wide range of hot melt polyamide adhesives. The specific structures and amounts of the diacids and diamines and their relative ratios have a big effect on the bio-based polyamide mechanical properties, but analysis of the structure-property relationships has seldom been attempted, since the data are mainly in the patent literature. The diacids derived from plant oils are valuable for making polyamides because of their very high bio-based content and highly tunable properties.

Sorption behavior and mechanism of U(VI) on Tamusu clay in the presence of U(VI)-CO3 complexes.

The sorption behavior of U(VI) on Tamusu clay sampled from a pre-selected high-level radioactive waste (HLW) disposal site in Inner Mongolia (China) was studied systematically in the U(VI)-CO3 solution at pH 7.8 by batch experiments. The results demonstrated that the distribution coefficients (Kd) decreased with the increasing values of pHinitial, [U(VI)]initial, and ionic strength, but increased with the extended time and the rising temperature. The sorption was a pH-dependent, heterogeneous, spontaneous, and endothermic chemical process, which could be better described by Freundlich isothermal model and pseudo-second-order kinetic model. The presence of humic acid (HA) or fulvic acid (FA) significantly inhibited the U(VI) sorption, due to the enhanced electrostatic repulsion between the negatively charged HA/FA adsorbed on the clay surface and the negative U(VI) species, as well as the well dispersed HA/FA aggregates in solution wrapping the U(VI) species. The FTIR and XPS spectra indicated that the HCO3- groups on the surface of Tamusu clay after hydroxylation and the ‒OH groups in HA/FA were involved in the U(VI) sorption. The results reported here provide valuable insights into the further understanding of U(VI) migration in geological media.

A new treatment step of bioelectrochemically treated leachate using natural clay adsorption towards sustainable leachate treatment.

Standalone and combined leachate treatment mechanisms suffer from low treatment efficiencies due to leachate's complex, toxic, and recalcitrant nature. Bioelectrochemical system (BES) was used for the first time to investigate the treatment of leachate mixed wastewater (WW) (i.e., diluted leachate, DL) (DL ≈ L:WW = 1:4) to minimize these complexities. A natural clay (palygorskite) was used as adsorbent material for further treatment on the BES effluent (EBES) while using two different masses and sizes (i.e., 3 g and 6 g of raw crushed clay (RCC) and 75 µ of sieved clay (75 µSC)). According to bioelectrochemical performance, BES, when operated with low external resistance (Rext = 1 Ω) (BES 1), showed a high removal of COD and NH3-N with 28% and 36%, respectively. On the other hand, a high Rext (100 Ω, BES 100) resulted in low removal of NH3-N with 10% but revealed high COD removal by 78.26%. Moreover, the 6 g doses of 75 µSC and RCC showed the maximum COD removals of 62% and 38% and showed the maximum removal of NH3-N with an average range of 40% for both sizes. After efficient desorption, both clay sizes resulted in regeneration performance which was observed with high COD (75%) and NH3-N (34%) on EBES. Therefore, when BES and clay adsorption technique sequentially treated and achieved with combined removal of ~ 98% for COD and ~ 80% of NH3-N, it demonstrated an efficient treatment method for DL treatment.

Properties of Self-Compacting Concrete Produced with Optimized Volumes of Calcined Clay and Rice Husk Ash-Emphasis on Rheology, Flowability Retention and Durability.

The durability of concrete requires a dense microstructure which can be achieved by using self-compacting concrete (SCC). Both calcined clay (CC) and rice husk ash (RHA) are promising supplementary cementitious materials (SCMs) that can partially replace cement, but their use in SCC is critical due to their higher water demand (WD) and specific surface area (SSA) compared to cement. The effect of partial substitution of cement at 20 vol-% with binary and ternary blends of CC and RHA on flowability retention and durability of SCC was investigated. The empirical method of SCC design was adopted considering the physical properties of both CC and RHA. The deformability of the SCC was evaluated using the slump flow and J-ring tests. The T500 time and the V-funnel test were used to assess the viscosity of the SCC. The flowability retention was monitored by the plunger method, and flow resistance was determined based on the rheological measurements of SCC. The evolution of the hydrate phases of the binder in SCC was determined by thermogravimetric analysis, while the durability was evaluated by a rapid chloride migration test. Cement partial replacement with 20 vol-% CC has no significant effect on fresh SCC, flowability retention, compressive strength and durability properties. On the other hand, 20 vol-% RHA requires a higher dosage of SP to achieve self-compactability and increase the viscosity of SCC. Its flowability retention is only up to 30 min after mixing and exhibited higher flow resistance. It consumes more calcium hydroxide (CH) and improves the compressive strength and chloride resistance of SCC. The ternary blending with CC and RHA yielded better fresh SCC properties compared to the binary blend with RHA, while an improved chloride penetration resistance could be achieved compared to the binary CC blend.