Toxicity of repeated oral intake of organic selenium, inorganic selenium, and selenium nanoparticles: A review.

BACKGROUND: To protect from toxicity at supra-essential doses of selenium, it is important to determine dose levels at which adverse effects occur. METHODS: We identified relevant literature on the repeated dosage of selenium and extracted dose descriptors on reported endpoints, except on genotoxicity/carcinogenicity. RESULTS: Selenium forms with toxicological data were organic ones: selenomethionine, selenocystine/selenocysteine; and inorganic ones, including selenite (SeO32-), selenate (SeO42-), selenium sulphide (SeS2), selenide (Se2-) and selenium nanoparticles. Clinical signs of selenium toxicity in humans include a garlicky-smelling breath, hair loss, and nail changes. One human study showed increased mortality following daily ingestion of 300 µg Se per day for 5 years, equal to a lowest-observed-adverse-effect level (LOAEL) of ∼4.3 µg/kg bw/days. The corresponding no-observed-adverse-effect level (NOAEL) was ∼2.9 µg Se/kg bw/day. One study reported an increased risk of type 2 diabetes after ∼2.9 µg Se/kg bw/day, but other studies with similar doses found no increases in mortality or incidence of type 2 diabetes. NOAELs on affected body weight in animal studies were 0.24-1.2 mg Se/kg bw/day. Other endpoints of selenium toxicity in animals include hepatotoxicity with a NOAEL as low as 2 µg/kg bw/day in rats, as well as gastrointestinal, cardiovascular, and reproductive toxicities with NOAELs of 0.6 (gastrointestinal), 0.08, and 0.4 (cardiovascular) and ≥ 0.04 mg Se/kg bw/day (reproductive), respectively. CONCLUSIONS: Dose descriptors describing selenium toxicity were as low as 2-3 µg Se/kg bw/day.

Inhibition of HAdV-14 induced apoptosis by selenocystine through ROS-mediated PARP and p53 signaling pathways.

BACKGROUND: Human Adenovirus (HAdV) can cause severe respiratory symptoms in people with low immunity and there is no targeted treatment for adenovirus infection. Anti-adenoviral drugs have high clinical significance for inhibiting adenovirus infection. Selenium (Se) plays an important role in anti-oxidation, redox signal transduction, and redox homeostasis. The excellent biological activity of Se is mainly achieved by being converted into selenocystine (SeC). Se participates in the active sites of various selenoproteins in the form of SeC. The ability of SeC to resist the virus has raised high awareness due to its unique antioxidative activity in recent years. The antiviral ability of the SeC was determined by detecting the infection rate of the virus in the cells. METHODS: The experiment mainly investigated the antiviral mechanism of SeC by locating the virus in the cell, detecting the generation of ROS, observing the DNA status of the cell, and monitoring the mitochondrial membrane potential. RESULTS: In the present study, SeC was designed to resist A549 cells infections caused by HAdV-14. SeC could prevent HAdV-14 from causing cell apoptosis-related to DNA damage. SeC significantly inhibited ROS generation and protect the cells from oxidative damage induced by ROS against HAdV-14. SeC induced the increase of antiviral cytokines such as IL-6 and IL-8 by activating the Jak2 signaling pathway, and repaired DNA lesions by suppressing ATR, p53, and PARP signaling pathways. CONCLUSION: SeC might provide an effective selenium species with antiviral properties for the therapies against HAdV-14.

Absorption, distribution, metabolism and excretion (ADME) of oral selenium from organic and inorganic sources: A review.

BACKGROUND: Selenium is a trace element traditionally ingested either in its organic form via food or in its inorganic form through nutritional supplements, while selenium formulated as nanoparticles is a putative long-acting alternative. To understand the physiology and toxicology of the different selenium formulations, it is important to determine how their selenium content is absorbed, distributed, metabolised and excreted; therefore, we reviewed their biokinetics following oral exposure. METHODS: We retrieved and reviewed the literature on the absorption, distribution, metabolism, and excretion of oral exposure to different forms of selenium. RESULTS: Selenium in both the organic form (containing carbon to selenium chemical bonds) and the inorganic form is absorbed into the blood in humans. The mean normal blood level of many studies was 139 µg/L. There are indications that selenium from organic sources is more bioavailable than selenium from inorganic sources. Selenium is distributed throughout the body, including in breast milk. The elimination of selenium mainly involves the faecal and urinary pathways, whereas breath, saliva and hair are minor contributors. Urinary metabolites include trimethylselenium ions, selenosugars and Se-methylselenoneine. CONCLUSION: Selenium is absorbed to a high extent, and selenium from organic sources is more bioavailable than from inorganic sources. Selenium, as expected as an essential trace element, is distributed throughout the body. Selenium is extensively metabolised, and various excretion metabolites have been identified in both urine and breath, while some selenium is also excreted via faeces.

Mechanical Insights into Thiol-Mediated Synergetic Biotransformation of Cadmium and Selenium in Nematodes.

Cadmium ion (Cd2+) is a common environmental pollutant with high biotoxicity. Interestingly, the Cd2+ biotoxicity can be alleviated by the coexisting selenite (SeO32-), which induces the formation of cadmium selenide-rich nanoparticles (CdSe NPs) under the function of thiol-capping peptides. However, the detailed biochemical mechanisms by which Cd and Se are synergistically transformed into CdSe NPs in living organisms remain unclear so far. Here, we shed light on the molecular basis of such biotransformation processes in Caenorhabditis elegans by focusing on the roles of several key thiol-capping peptides. By monitoring the compositional and structural changes of the Cd and Se species and the genetic-level responses of nematodes, we revealed the specific roles of glutathione (GSH) and phytochelatins (PCs) in mediating the CdSe NP formation. With the aid of in vitro bioassembly assay and density functional theory calculations, the detailed Cd-Se interaction pathways were further deciphered: the ingested Cd binds predominantly to GSH and PCs in sequence, then further interacts with selenocysteine to form tetrahedral-structured PC2-Cd2-Sec2 complex, and ultimately grows into CdSe NPs. This work provides molecular-level insights into the Cd-Se interaction in C. elegans and lays a basis for controlling the ecological and health risks of heavy metals in polluted environment.

Effect of organo-selenium anticancer drugs on nitrite induced methemoglobinemia: A spectroscopic study.

Selenium containing drugs like selenomethionine, selenocystine, selenourea and methylseleninic acid are reported to exhibit potential anticancer effect. However, these anticancer drugs may exert adverse effects when used over a prolonged period. Little is known about the interaction of these selenium containing drugs with the vital erythroid protein hemoglobin. In this work a comparative study of the interaction of organo-selenium drugs with hemoglobin and heme moiety has been performed using different spectroscopic techniques to find out their role on drug induced methemoglobinemia. We found that though these selenium containing drugs have similar binding affinity towards hemoglobin, they have differential interactions with the heme group. Isothermal calorimetric titration study showed that selenourea has the lowest binding affinity (Kd 19.28 µM) towards HbA as compared to other drugs, selenomethionine, selenocystine and methylseleninic acid (Kd 7.69 µM, 4.88 µM and 10.5 µM at 37 °C respectively). This result is also supported by the molecular docking study. Methylseleninic acid was found to have detrimental effects on nitrite induced methemoglobinemia, a hematological disorder caused due to excessive conversion of Fe2+ to Fe3+ in hemoglobin. Hence the results of the study would help to develop a better insight on the mechanism of action and anticipate the toxicity of these drugs which require further optimization before their actual use in the treatment of cancer.

Development and application of a HPLC-ICP-MS method to determine selenium speciation in muscle of pigs treated with different selenium supplements.

Dietary selenium deficiency is recognized as a global problem. Pork is the most widely consumed meat throughout the world and an important source of selenium for humans. In this study, a reliable approach was developed for analyzing selenium and its speciation in the muscles of pigs after different selenium treatments. The selenium source deposition efficiency was ranked as: selenomethionine > methylselenocysteine > selenite, and the muscle selenium content had a dose effect with selenomethionine supplementation. In total, four species of selenium were detected in the muscles of pigs and the distributions of these selenium species were greatly affected by the dietary selenium supplementation forms and levels. Selenomethionine (>70% of total selenium) and selenocystine (>11%) were the major selenium species, followed by methylselenocysteine and selenourea. Therefore, selenium-enriched pork produced from selenomethionine is a good source for improving human dietary selenium intake.

Nutraceutical formulation, characterisation, and in-vitro evaluation of methylselenocysteine and selenocystine using food derived chitosan:zein nanoparticles.

Selenoamino acids (SeAAs) have been shown to possess antioxidant and anticancer properties. However, their bioaccessibility is low and they may be toxic above the recommended nutritional intake level, thus improved targeted oral delivery methods are desirable. In this work, the SeAAs, Methylselenocysteine (MSC) and selenocystine (SeCys2) were encapsulated into nanoparticles (NPs) using the mucoadhesive polymer chitosan (Cs), via ionotropic gelation with tripolyphosphate (TPP) and the NPs produced were then coated with zein (a maize derived prolamine rich protein). NPs with optimized physicochemical properties for oral delivery were obtained at a 6: 1 ratio of Cs:TPP, with a 1:0.75 mass ratio of Cs:zein coating (diameter ~260 nm, polydispersivity index ~0.2, zeta potential >30 mV). Scanning Electron Microscopy (SEM) analysis showed that spheroidal, well distributed particles were obtained. Encapsulation Efficiencies of 80.7% and 78.9% were achieved, respectively, for MSC and SeCys2 loaded NPs. Cytotoxicity studies of MSC loaded NPs showed no decrease in cellular viability in either Caco-2 (intestine) or HepG2 (liver) cells after 4 and 72 h exposures. For SeCys2 loaded NPs, although no cytotoxicity was observed in Caco-2 cells after 4 h, a significant reduction in cytotoxicity was observed, compared to pure SeCys2, across all test concentrations in HepG2 after 72 h exposure. Accelerated thermal stability testing of both loaded NPs indicated good stability under normal storage conditions. Lastly, after 6 h exposure to simulated gastrointestinal tract environments, the sustained release profile of the formulation showed that 62 ±â€¯8% and 69 ±â€¯4% of MSC and SeCys2, had been released from the NPs respectively.

The response of broccoli (Brassica oleracea convar. italica) varieties on foliar application of selenium: uptake, translocation, and speciation.

A model small-scale field experiment was set up to investigate selenium (Se) uptake by four different varieties of broccoli plants, as well as the effect of Se foliar application on the uptake of essential elements for plants calcium (Ca), copper (Cu), iron (Fe), potassium (K), magnesium (Mg), manganese (Mn), phosphorus (P), sulfur (S), and zinc (Zn). Foliar application of sodium selenate (Na2SeO4) was carried out at two rates (25 and 50 g Se/ha), and an untreated control variant was included. Analyses of individual parts of broccoli were performed, whereby it was found that Se in the plant accumulates mainly in the flower heads and slightly less in the leaves, stems, and roots, regardless of the Se rate and broccoli variety. In most cases, there was a statistically significant increase of Se content in all parts of the plant, while there was no confirmed systematic influence of the addition of Se on the changing intake of other monitored elements. Selenization of broccoli leads to an effective increase in the Se content at a rate of 25 g/ha, whereas the higher rate did not result in a substantial increase of Se content compared to the lower rate in all varieties. Therefore, the rate of 25 g/ha can be recommended as effective to produce broccoli with an increased Se content suitable for consumption. Moreover, Se application resulted in an adequate increase of the main organic compounds of Se, such as selenocystine (SeCys2), selenomethionine (SeMet), and Se-methylselenocysteine (Se-MeSeCys).