Preparation and characterization of ZSM-5 molecular sieve using coal gangue as a raw material via solvent-free method: Adsorption performance tests for heavy metal ions and methylene blue.

Coal gangue is a kind of solid waste produced in the process of coal mining and washing. Its silicon aluminum silicon aluminum oxide content is high, respectively, which are suitable for resource utilization as raw materials for Si-Al molecular sieving. In this paper, a novel, simple, low-cost, and environmentally friendly process was carried out to prepare ZSM-5 zeolite by solvent free method after calcination, acid leaching, and alkali melting. The obtained samples were characterized by Energy Dispersive Spectrometer (EDS), Inductively Coupled Plasma (ICP), Thermo-gravimetry Analysis (TG), X-ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared Spectrometer (FTIR) X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM) and N2 adsorption isotherm. The characteristics of the raw materials and the adsorption mechanism of the prepared samples were characterized. Through a series of pretreatment such as calcined acid leaching and alkali melting of the raw materials, the silicon-aluminum ratio of the sample reaches 1.749, and the maximum specific surface area of the sample can reach 252.59 m2/g. The obtained samples were used to adsorb heavy metal ions and methylene blue solution, and the removal rate of lead ions and methylene blue solution was more than 95%. The theoretical maximum adsorption capacity of Pb ion, methylene blue solution and copper ion can reach 232.56 mg/g and 118.34 mg/g. The adsorption process is mainly chemical adsorption. The product could be suitable for removing both heavy metal ions and cationic dyes from the wastewater and had broad application prospects.

Tuning bio-aerogel properties for controlling theophylline delivery. Part 1: Pectin aerogels.

A comprehensive study of release kinetics of a hydrophilic drug from bio-aerogels based on pectin was performed. Pectin aerogels were made by polymer dissolution, gelation (in some cases this step was omitted), solvent exchange and drying with supercritical CO2. Theophylline was loaded and its release was studied in the simulated gastric fluid during 1 h followed by the release in the simulated intestinal fluid. Pectin concentration, initial solution pH and concentration of calcium were varied to tune the properties of aerogel. The kinetics of theophylline release was monitored and correlated with aerogel density, specific surface area, and aerogel swelling and erosion. Various kinetic models were tested to identify the main physical mechanisms governing the release.

Obtainment of the spray-dried extracts of Peperomia pellucida L. (H.B.K.) using different atomization temperatures: physicochemical characterization and technological development for pharmaceutical applications.

Spray-dried extracts are prepared as powders or granules after solvent removal, which can be obtained in the presence or absence of pharmaceutical adjuvants. This work aimed to optimize the process of obtaining dried extracts of Peperomia pellucida L. (HBK) by spray drying. The characterization of the extract was performed by thermal analysis, specific surface area, particle size and high performance liquid chromatography (HPLC); then, capsules were developed for antimicrobial treatment, evaluating four bench lots by the determination of the angle of repose and time of flow, scanning electron microscopy, porosity and physicochemical quality control. There were no significant differences between the extracts obtained by spray drying at atomization temperatures of 140 °C, 160 °C and 180 °C, which was confirmed by thermal analysis. Specific surface area varied inversely with the mean particle size. Regarding the marker content by HPLC, no significant differences were found between the samples, although the flavonoid fraction was more stable at 160 °C. Bench lots (I to IV) were developed using the diluents Flowlac®, Starch® 1500, microcrystalline cellulose 250 and Cellactose® 80. Based on the results, the bench lot I, containing Flowlac®, was selected. The results of physicochemical quality control demonstrated that the selected formulation meets the pre-established parameters, and proving to be economically viable.

Synergistic effect of a spinel ferrite on the adsorption capacity of nano bio-silica for the removal of methylene blue.

The synergistic effect of CoFe2O4 on the capacity of bio-silica extracted from rice husk for the removal of methylene blue (MB) was investigated. The novel composite of cobalt ferrite/nano bio-silica was prepared by dispersing cobalt and iron salt in ratio 1:2 in a solution containing bio-silica, calcined at 700°C and characterized. The adsorption capacity of the composite (253.6 mg g-1) was higher than that of bio-silica (52.6 mg g-1), and the process was exothermic and spontaneous. Langmuir and Freundlich models were applicable to explain the adsorption isotherm, while pseudo-second-order and Elovich are best applicable for the kinetics mechanism. The amount of MB that was removed, increased with an increase in ionic strength due to dimerization of MB. Regeneration and reusability of the adsorbents showed that they are economically viable. Energy-filtered transmission electron microscopy (EFTEM) and Fourier transformed infrared (FTIR) analysis of MB-loaded adsorbent confirmed the adsorption of MB.

Characteristics of phosphorus adsorption and desorption in erosive weathered granite area and effects of soil properties.

Highly weathered acidic soils tend to have high phosphorus adsorption rates. Studying the differential phosphorus adsorption and desorption characteristics of these soils is of great significance to improve phosphorus utilization efficiency and reduce soil phosphorus loss in agricultural management. Erosive weathered granite soil (TL-Tillage layer, LL-Laterite layer, and SL-Sand layer) in Anji County, Zhejiang Province were selected for batch experiments and phosphorus fractionation test. The soil properties that are generally considered to have a greater impact on phosphorus adsorption and desorption are also studied. Derived from the Langmuir adsorption isotherm, the maximum absorption capacity (Qmax) of phosphorus in TL soil was greater than that in LL and SL soil. With a pH of 4.3-5.0, the three soils have the most phosphorus adsorption. The desorption ratio (Dr) in the SL soil is larger than the LL and TL soil. Six key soil property indicators can fit Qmax and Dr values well. Al-P is the main fraction in the phosphorus adsorption-desorption process. The particle size classification (PSC) method can be used to accurately calculate soil-specific surface area. The results of the soil phosphorus adsorption-desorption test can be used as an explanation of the results of artificial rainfall tests. Our results reveal the differential adsorption-desorption mechanism of eroded weathered granite soil, and provide a reference for selecting soil indicators for soil adsorption-desorption studies in different regions.

Changes in physicochemical properties of organic matter by uranium irradiation: A case study from the Ordos Basin in China.

Carbonaceous debris (CD) are exclusively disseminated in sandstones of uranium-bearing strata from the Dongsheng uranium ore field of the northern Ordos Basin, northern China. Physicochemical properties of CD were investigated through a series of tests including element analyses, Fourier transform infrared spectroscopy (i.e., FTIR) and organic carbon isotope (i.e., δC13) as well as specific surface area. The results show that δC13 of the samples from uranium-bearing strata range from -22.86‰ to -25.82‰, indicating that the CD is from the same origin. The average values of C, H, O and N are 54.54%, 4.55%, 39.15% and 0.49%, respectively, and H/C as well as O/C atomic ratios vary from 0.77 to 1.26 and 0.36 to 1.72, respectively, implying that CD is mostly composed of C and O, followed by H, and is grouped into Type Ⅲ kerogen at an immature to low mature stage. Compared with the samples without uranium enrichment, C, H, N and δ13C of the uranium-bearing samples increase by 13.66%, 5.32%, 12.50% and 0.98‰, respectively, while decrease by 18.50%, 7.84% and 33.33%, respectively, for O, H/C as well as O/C atomic ratios. As the intensity of uranium enrichment increases, H/C atomic ratios and aliphaticity decrease, and aromaticity increases. Besides, uranium-bearing samples are of smaller specific surface area than those without uranium enrichment. Alpha irradiation energy released by uranium and its daughters could cause the crosslinking in n-alkanes and long-chain polymers through a free-radical mechanism, which is supported by a decrease in O, aliphaticity and an increase in aromaticity. Hence, it results in polycondensation of molecular structure with a decrease in side chain length, function groups as well as specific surface area, and changes in physicochemical properties of organic matter, which is instructive in prospecting.

Growth performance, zinc tissue content, and intestinal health in meat ducks fed different specific surface area of micronized zinc oxide.

This study investigated the effect of different specific surface area micronized zinc oxide (ZnO) on growth performance, zinc (Zn) tissue content, jejunal morphology, jejunal antioxidative status, and intestinal mucosa barrier-related gene expression in meat ducks. A total of 480 one-day-old Cherry Valley ducks were randomly divided into 4 dietary treatments, which each had 12 replicates; therefore, each replicate consisted of 10 ducks. Experimental diets included the basal diet supplemented with ZnSO4 (control group) and 3 different treatments of specific surface area micronized ZnO, in which the specific surface area was either 11.30 m2/g (S-mZnO), 20.90 m2/g (M-mZnO), or 34.02 m2/g (L-mZnO). The amount of Zn extra supplementation in the 4 diets was 120 mg/kg of diet. The experiment lasted for 35 D. The results showed that supplementation of M-mZnO significantly increased (P < 0.05) the BW (35 D), the BW gain (14 to 35 and 1 to 35 D), the jejunal crypt depth, and mRNA expression of zonula occludens-3, mucin 2, and secretory immunoglobulin A of ducks, while the feed-to-gain ratio (14 to 35 and 1 to 35 D) significantly decreased (P < 0.05) when compared to the control and the other 2 supplementation groups. Furthermore, compared with control group, the hepatic Zn content and the jejunal superoxide dismutase activity in the 3 micronized ZnO groups were significantly increased (P < 0.05), and the Zn content in the pancreas tended to increase (P = 0.051). In conclusion, this study demonstrates that M-mZnO as a dietary supplement can improve the growth performance of meat ducks by increasing the Zn tissue content and improving intestinal morphology, antioxidative status, and physical, chemical, and immunological barrier function.

"False" cytotoxicity of ions-adsorbing hydroxyapatite - Corrected method of cytotoxicity evaluation for ceramics of high specific surface area.

An assessment of biomaterial cytotoxicity is a prerequisite for evaluation of its clinical potential. A material is considered toxic while the cell viability decreases under 70% of the control. However, extracts of certain materials are likely to reduce the cell viability due to the intense ions adsorption from culture medium (e.g. highly bioactive ceramics of high surface area). Thus, the standard ISO 10993-5 procedure is inappropriate for cytotoxicity evaluation of ceramics of high specific surface area because biomaterial extract obtained in this method (ions-depleted medium) is not optimal for cell cultures per se. Therefore, a simple test was designed as an alternative to ISO 10993-5 standard for cytotoxicity evaluation of the biomaterials of high surface area and high ions absorption capacity. The method, presented in this paper, included the evaluation of ceramics extract prepared according to corrected procedure. The corrected extract was found not cytotoxic (cell viability above 70%), suggesting that modified method for cytotoxicity evaluation of ions-adsorbing ceramics is more appropriate than ISO 10993-5 standard. For such biomaterials, the term "false" cytotoxicity is more suitable. Moreover, it was noted that NRU assay and microscopic observations should be recommended for cytotoxicity evaluation of ceramics of high surface area.

A Comparative Analyses of Granulometry, Mineral Composition and Major and Trace Element Concentrations in Soils Commonly Ingested by Humans.

This study compared the granulometric properties, mineralogical composition and concentrations of major and trace element oxides of commonly ingested soils (geophagic soil) collected from different countries with a view of understanding how varied they may be in these properties and to understand the possible health implications of ingesting them. Soil samples were collected from three different countries (South Africa, Swaziland and Democratic Republic of Congo (DRC)) and their granulometric properties, concentrations of major and trace element oxides as well as mineralogical composition determined. Differences were observed in the granulometric properties of geophagic soil from the three different countries with most of them having <20% clay content. The soils also showed varied degrees of weathering with values of Chemical Index of Alteration (CIA) and Chemical Index of Weathering (CIW) being between 60% and 99.9% respectively. The mineral assemblages of the soils from South Africa and Swaziland were dominated by the primary minerals quartz and feldspar whereas soils from DRC had more of kaolinite, a secondary mineral than primary minerals. Soils from DRC were associated with silt, clay, Al2O3, and CIA unlike most samples from South Africa which were associated with SiO2, sand, K2O, CaO, and MgO. The soils from Swaziland were closely associated with silt, H2O and Fe2O3(t). These associations reflect the mineralogy of the samples. These soils are not likely to serve as nutrient supplements because of the low concentrations of the nutrient elements contained. The coarse texture of the samples may also result in dental destruction during mastication. Sieving of the soils before ingestion to remove coarse particles is recommended to reduce the potential health threat associated with the ingestion of coarse-textured soils.