Fate, behaviour and microbial response of diluted bitumen and conventional crude spills in a simulated warm freshwater environment.

Diluted bitumen (DB), one of the most transported unconventional crude oils in Canada's pipelines, raises public concerns due to its potential spillage into freshwater environments. This study aimed to compare the fate and behaviour of DB versus conventional crude (CC) in a simulated warm freshwater environment. An equivalent of 10 L of either DB or CC was spilled into 1200 L of North Saskatchewan River (NSR) water containing natural NSR sediment (2.4 kg) in a mesoscale spill tank and its fate and behaviour at air/water temperatures of 18 °C/24 °C were monitored for 56 days. Oil mass distribution analysis showed that 42.3 wt % of CC and 63.6 wt% of DB resided in the oil slicks at the end of 56-day tests, consisting mainly high molecular weight (HMW) compounds (i.e., resins and asphaltenes). The lost oil contained mainly low molecular weight (LMW) compounds (i.e., light saturates and some aromatics) into the atmosphere, water column, and sediment through collective weathering processes. Notably, weathered CC emulsified with water and remained floating until the end, while the weathered DB mat started to lose its buoyancy after 24 days under quiescent conditions and resurfaced once waves were applied. Analysis of the microbial communities of water pre- and post-spills revealed the replacement of indigenous microbial communities with hydrocarbon-degrading species. Exposure to CC reduced the microbial diversity by 12%, while exposure to DB increased the diversity by 10%. During the early stages of the spill (up to Day 21), most dominant species were positively correlated with the benzene, toluene, ethylbenzene, and xylenes (BTEX) content or polycyclic aromatic hydrocarbon (PAH) content of the water column, while the dominant species at the later stages (Days 21-56) of the spill were negatively correlated with BTEX or PAH content and positively correlated with the total organic carbon (TOC) content in waters.

Nutritional values of wild edible freshwater macrophytes.

Background: The social acceptability of wild freshwater macrophytes as locally consumed vegetables is widespread. Freshwater macrophytes have several uses; for example, they can be used as food for humans. This study determined the proximate composition and mineral content of three freshwater macrophyte species, i.e., Eichhornia crassipes, Limnocharis flava, and Neptunia oleracea. Methods: Young shoots of E. crassipes, L. flava, and N. oleracea were collected from shallow channels of Puchong (3°00'11.89″N, 101°42'43.12″E), Ladang 10, Universiti Putra Malaysia (2°58'44.41″N, 101°42'44.45″E), and Kampung Alur Selibong, Langgar (06°5'50.9″N, 100°26'49.8″E), Kedah, Peninsular Malaysia. The nutritional values of these macrophytes were analysed by using a standard protocol from the Association of Official Analytical Chemists. Eight replicates of E. crassipes and L. flava and four replicates of N. oleracea were used for the subsequent analyses. Results: In the proximate analysis, N. oleracea possessed the highest percentage of crude protein (29.61%) and energy content (4,269.65 cal g-1), whereas L. flava had the highest percentage of crude fat (5.75%) and ash (18.31%). The proximate composition trend for each species was different; specifically, all of the species possessed more carbohydrates and fewer crude lipids. All of the species demonstrated a similar mineral trend, with high nitrogen and potassium and lower copper contents. Nitrogen and potassium levels ranged from 12,380-40,380 mg kg-1 and from 11,212-33,276 mg kg-1, respectively, and copper levels ranged from 16-27 mg kg-1. The results showed that all three plant species, i.e., E. crassipes, N. oleracea, and L. flava are plant-based sources of macro- and micronutrient beneficial supplements for human consumption.

In Vitro Antiproliferative Activity and Phytochemicals Screening of Extracts of the Freshwater Microalgae, Chlorochromonas danica.

The present study was focused on the screening of phytochemicals, their quantitative estimation and analysis by LC-MS profile, and antiproliferative efficacy of the aqueous-ethanolic extracts of the microalgae, Chlorochromonas danica isolated from the freshwater body Tavanampalli. The aqueous-ethanol extract of Chlorochromonas danica showed the presence of flavonoids, phenols, and proteins. The total flavonoid content, total phenol content, and total protein content were determined to be 158.65 mg of quercetin equivalent, 15.75 mg of gallic acid equivalent, and 134.65 mg/g dry weight of the extract, respectively. The LC-MS analysis confirmed the presence of several major bioactive molecules including L-Histidine, D-glutamine, L-aspartic acid, adenine, adenosine, cotinine, guanine hypoxanthine, L-glutamic acid, nicotinamide, 4-Hydroxycoumarin, and Stearamide. The aqueous-ethanol extract of Chlorochromonas danica exhibited an IC50 values of 63.34 µg, 279.29 µg, 125.42 µg, 90.56 µg, and 95.58 µg against A375, A549, HeLa, HepG2, and HT29 cell lines respectively, compared to the positive control cisplatin with IC50 values of 3.56 µg, 4.65 µg, 3.88 µg, 4.87 µg, and 7.23 µg respectively. These data suggest that Chlorochromonas danica remains a promising drug candidate for the treatment of cancers, particularly melanoma (A375 cell line) that can be considered for purification of antiproliferative compound and further clinical trials for the discovery of novel antiproliferative drugs from cost-effective sources.

Reliable Quantification of Ultratrace Selenium in Food, Beverages, and Water Samples by Cloud Point Extraction and Spectrometric Analysis.

Selenium is a trace element essential for the proper functioning of human body. Since it can only be obtained through our diet, knowing its concentrations in different food products is of particular importance. The measurement of selenium content in complex food matrices has traditionally been a challenge due to the very low concentrations involved. Some of the difficulties may arise from the abundance of various compounds, which are additionally present in examined material at different concentration levels. The solution to this problem is the efficient separation/preconcentration of selenium from the analyzed matrix, followed by its reliable quantification. This review offers an insight into cloud point extraction, a separation technique that is often used in conjunction with spectrometric analysis. The method allows for collecting information on selenium levels in waters of different complexity (drinking water, river and lake waters), beverages (wine, juices), and a broad range of food (cereals, legumes, fresh fruits and vegetables, tea, mushrooms, nuts, etc.).

Can correlational analyses help determine the drivers of microcystin occurrence in freshwater ecosystems? A meta-analysis of microcystin and associated water quality parameters.

Microcystin (MC) is a toxic secondary metabolite produced by select cyanobacteria that threatens aquatic and terrestrial organisms over a diverse range of freshwater systems. To assess the relationship between environmental parameters and MC, researchers frequently utilize correlational analyses. This statistical methodology has proved useful when summarizing complex water quality monitoring datasets, but the correlations between select parameters and MC have been documented to vary widely across studies and systems. Such variation within the peer-reviewed literature leaves uncertainty for resource managers when developing a MC monitoring program. The objective of this research is to determine if correlational analyses between environmental parameters and MC are helpful to resource managers desiring to understand the drivers of MC. Environmental (i.e., physical, chemical, and biological) and MC correlation data were retrieved from an estimated 2,643 waterbodies (largely from the north temperate region) and synthesized using a Fisher's z meta-analysis. Common water quality parameters, such as chlorophyll, temperature, and pH, were positively correlated with MC, while transparency was negatively correlated. Interestingly, 12 of the 15 studied nitrogen parameters, including total nitrogen, were not significantly correlated with MC. In contrast, three of the four studied phosphorus parameters, including total phosphorus, were positively related to MC. Results from this synthesis quantitatively reinforces the usefulness of commonly measured environmental parameters to monitor for conditions related to MC occurrence; however, correlational analyses by themselves are often ineffective and considering what role a parameter plays in the ecology of cyanobacterial blooms in addition to MC production is vital.

A Novel In Situ Method for Simultaneously and Selectively Measuring AsIII, SbIII, and SeIV in Freshwater and Soils.

Anthropogenic and climatic perturbations redistribute arsenic (As), antimony (Sb), and selenium (Se) within the environment. The speciation characteristics of these elements determine their behavior and biogeochemical cycling, but these redox-sensitive species are challenging to capture, with few methods able to harmonize measurements across the whole plant-soil-ecosystem continuum. In this study, we developed a novel diffusive gradient in thin films (DGT) method based on aminopropyl and mercaptopropyl bi-functionalized mesoporous silica spheres (AMBS) to achieve in-situ, simultaneous, and selective quantification of AsIII, SbIII, and SeIV, three typical/toxic but difficult to measure inorganic species. When used for environmental monitoring within a river catchment, AMBS-DGT exhibited stable/accurate predictions of these species despite varying water chemistries (ionic strength 0.01-200 mmol L-1 NO3-, pH 5-9 for AsIII and SbIII, and pH 5-7.5 for SeIV). Furthermore, river deployments also showed that time-averaged species concentrations by AMBS-DGT were reproducible compared with high-frequency sampling and measurement by high performance liquid chromatography coupled with inductively coupled plasma mass spectroscopy. When AMBS-DGT was used for sub-mm scale chemical imaging of soil solute fluxes, the method resolved concomitant redox-constrained spatial patterns of AsIII, SbIII, and SeIV associated with root O2 penetration within anaerobic soil. Improved capabilities for measurement of compartment interfaces and microniche features are critical alongside the measurement of larger-scale hydrological processes that dictate the fine-scale effects, with the AMBS-DGT achieving this for AsIII, SbIII, and SeIV.

Moringa oleifera Plant as potent alternate to Chemical Coagulant in Water Purification

Abstract Quality of groundwater is threatened due to pollution by industrial, domestic and agricultural waste. A large number of populations are residing in rural areas which are unable to afford high cost water purifiers due to their low income as well as limited awareness. However, limited availability of fresh water has become a critical issue in developing countries. Around 1.2 billion population is deprived of affordable and safe water for their domestic need. Additionally, chemical coagulants which are nowadays being used for water purification pose severe and numerous health hazards to human. Thus utilization of easily accessible natural coagulant for water purification might offer a sustainable, practical and cost effective solution to the current alarming situation in developing countries. Several experimental findings have shown strong efficiency of Moringa oleifera plant extracts obtained from different solvents in the improvement of water quality parameters including physicochemical (such as pH, hardness, turbidity, metallic impurities, total dissolved solid) and biological (E.coli count) parameter. We have also highlighted the limitations and advantages of chemical coagulation in water purification. Altogether, this review summarizes one such miracle tree which has shown significant potential as a natural coagulant and its associated underlying mechanism in water purification process.

Boron Contents of German Mineral and Medicinal Waters and Their Bioavailability in Drosophila melanogaster and Humans.

SCOPE: Boron is a trace element that naturally occurs in soil, making mineral and medicinal water important contributors to overall intake. Thus, in a systematic screening, the mean boron concentrations of 381 German mineral and medicinal waters are determined. METHODS AND RESULTS: Boron concentrations in mineral and medicinal waters are analyzed by inductively coupled mass spectrometry (ICP-MS). Highest boron values find in waters from the southwest of Germany. The boron content of the waters is positively correlated with the concentration of most other analyzed bulk elements, including calcium, potassium, magnesium, and sodium. Mineral waters with either low (7.9 µg L-1 ), medium (113.9 µg L-1 ), or high (2193.3 µg L-1 ) boron content are chosen for boron exposure experiments in fruit flies (Drosophila melanogaster) and humans. In flies, boron-rich mineral water significantly increases boron accumulation, with the accumulation predominantly occurring in the exoskeleton. In humans, serum boron and 24-h urinary boron excretion significantly increase only in response to the intake of boron-rich mineral water. CONCLUSION: Overall, the current data demonstrate that mineral and medicinal waters vary substantially in the content of boron and that boron-rich mineral water can be used to elevate the boron status, both in flies and humans.

Characteristics of surface water quality and stable isotopes in Bamen Bay watershed, Hainan Province, China.

Bamen Bay is located at the intersection of the Wenjiao River and Wenchang River in Hainan Province (China), where mangroves have been facing a threat of water quality deterioration. Therefore, it is imperative to study the characteristics of the surface water quality on a watershed scale. Water samples were collected three times from 36 monitoring sites from 2015 to 2016. It was found that nitrate was the main inorganic nitrogen form and all the surface water types were alkaline. Meanwhile, aquaculture water had high content of nitrogen, total phosphorus, chlorophyll a (Chl.a), total organic carbon (TOC), and chemical oxygen demand (COD). Significant spatial and temporal variations were found for most parameters. However, stable isotopes of δD and δ18O indicated that river water mainly originated from atmospheric precipitation and experienced strong evaporation. The water chemistry and isotopes of the Bamen Bay, mangroves, and aquaculture water were initially affected by the mixing of fresh water and seawater, followed by evaporation. The river and reservoir water chemistry were mainly controlled by water-rock interactions and cation exchange as deduced from the ionic relationships and Gibbs plots. These interactions involved the dissolution of calcite-, bicarbonate-, carbonate-, and calcium-containing minerals. Oxidized environments (river, reservoir, and Bamen Bay) were conducive for nitrification, while anaerobic conditions (mangrove and aquaculture water) were beneficial to the reduced nitrogen forms.

Metal-induced G-quadruplex polymorphism for ratiometric and label-free detection of lead pollution in tea.

Lead pollution are critical concerns for food safety and human health. Herein, a ratiometric metal-induced G-quadruplex polymorphism was introduced to construct aptamer probes, enabling label-free and ratiometric detection of lead in tea, thus is promising for on-site detection of lead pollution. The key feature of the aptamer probe is the synergistic utilization of the dual-wavelength fluorescent signal outputs from a G-quadruplex specific dye and a DNA intercalation dye under a single-wavelength excitation, leading to a more stable and reliable recognition of Pb2+ than that of analyses based on single fluorescent reporter. The aptamer probe allowed to a mix-and-read, rapid, cost-effective detection of Pb2+ with high specificity and accuracy. Pb2+ analysis in tap water and tea exhibited good performance with recovery rates of 92.3%-109.0%. The adoption of ratiometric metal-induced G-quadruplex polymorphism would be a compelling design strategy for constructing robust aptasensor, facilitating the translation of aptamer for food safety control.

Comparison of Zinc, Copper and Selenium Content in Raw, Smoked and Pickled Freshwater Fish.

The aim of the study was to assess the zinc (Zn), copper (Cu) and selenium (Se) content in freshwater fish from Poland. Selected species of raw, smoked and pickled fish were evaluated by atomic absorption spectrometry (AAS). The concentration of Zn, Cu and Se in the examined fish ranged from 1.5 to 49.9 mg/kg, 0.01 to 2.8 mg/kg and 30.9 to 728.2 µg/kg, respectively. One serving of every fish product covered the recommended dietary allowance (RDA) of Zn by 5.38-65.0%, of Cu by 0.42-11.4% and of Se by 12.3-198.6%. A cluster analysis allowed us to distinguish European eel (raw and smoked) based on the Zn content. Additionally, based on the Cu and Se content, pickled common whitefish was differentiated from other species and types of fish products. The discriminant analysis model of smoked fish enabled their classification with a 70% accuracy. Regarding Zn, all forms of the European eel as well as raw and smoked vendace can be considered a source of this element. None of the tested fish can be considered a source of Cu. All products are safe for human consumption with regard to the Zn and Cu content. Almost each form of every species of fish can be considered a source of Se. However, the Se content should be monitored in smoked and pickled common whitefish, pickled bream and pickled vendace.

A novel mitochondria-targetted near-infrared fluorescent probe for selective and colorimetric detection of sulfite and its application in vitro and vivo.

Overdoses of SO2 and its derivatives (SO32-/HSO3-) in food or organisms are harmful to health. To detect SO32-/HSO3-, a novel NIR fluorescent probe 1, based upon the intramolecular charge transfer (ICT) mechanism, was developed. This probe was easily synthesized, and gave noticeable colorimetric and linear fluorescence changes at 690 nm after reaction with sulfite from 3.13 to 200 µM. Moreover, probe 1 displayed high sensitivity (LOD = 0.46 µM), excellent selectivity (among 13 kinds of anions and 3 kinds of biothiols) and quick response (within 30 min) towards SO32-/HSO3-. The SO32-/HSO3- sensing mechanism was confirmed as the Michael addition reaction. Furthermore, the probe showed wide applications for measuring SO32-/HSO3- in real samples, including sugar, tap water, wine and traditional Chinese medicine. The probe could also be used to detect SO32-/HSO3- in mitochondria of HepG2 cells and zebrafish, which suggested potential application for monitoring SO2 derivatives in clinical diagnostics.

Global mapping of freshwater nutrient enrichment and periphyton growth potential.

Periphyton (viz. algal) growth in many freshwater systems is associated with severe eutrophication that can impair productive and recreational use of water by billions of people. However, there has been limited analysis of periphyton growth at a global level. To predict where nutrient over-enrichment and undesirable periphyton growth occurs, we combined several databases to model and map global dissolved and total nitrogen (N) and phosphorus (P) concentrations, climatic and catchment characteristics for up to 1406 larger rivers that were analysed between 1990 and 2016. We predict that 31% of the global landmass contained catchments may exhibit undesirable levels of periphyton growth. Almost three-quarters (76%) of undesirable periphyton growth was caused by P-enrichment and mapped to catchments dominated by agricultural land in North and South America and Europe containing 1.7B people. In contrast, undesirable periphyton growth due to N-enrichment was mapped to parts of North Africa and parts of the Middle East and India affecting 280 M people. The findings of this global modelling approach can be used by landowners and policy makers to better target investment and actions at finer spatial scales to remediate poor water quality owing to periphyton growth.

Bioavailability of selenium (Se) in cattle population in Sri Lanka based on qualitative determination of glutathione peroxidase (GSH-Px) activities.

Glutathione Peroxidase activity in whole blood is well correlated with the Selenium (Se) levels in cattle hence can be used effectively to assess the supply of Se to farm animals. In this study, Se status of cattle from five different geographic regions of Sri Lanka were assessed based on glutathione peroxidase (GSH-Px) activity. The GSH-Px activity was determined in whole blood samples collected from 80 cattle from 31 different farms in five districts viz. Kandy, Anuradhapura, Batticoloa, Trincomalee and Jaffna using photometric method. Mean GSH-Px activity was found to be 825, 1239, 1039, 849 and 1307 µkat L-1 in above districts, respectively while the reference value was considered as 665.4 µkat L-1. Among the studied animals, insufficient Se levels were detected in 50%, 17%, 9%, 27% and 5%, respectively, from above districts. Kruskal Wallis test indicated a significant variation among the sampled locations with respect to the GSH-Px activity (p = 0.001). Selenium content in pasture and water collected from studied locations varied from 6.0 to 554 µg kg-1 and < 0.03-1.14 µg L-1, respectively. The lower Se levels in feeds recorded from Kandy region infer the lower GSH-Px activity in the animals from the same region. This variability may be due to differences in nutrient supply, age and species of cattle, and lactation stage. Although the assessing method has some limitations, the activity of GSH-Px of the samples indirectly confirms that considerable numbers of cattle from Sri Lanka are with insufficient selenium levels.

A cytosine-rich hairpin DNA loaded with silver nanoclusters as a fluorescent probe for uranium(IV) and mercury(II) ions.

A dually responsive fluorescent probe for determination of U(IV) and mercury(II) ions was synthesized. The probe consists of a cytosine-rich hairpin DNA loaded with silver nanoclusters (DNA-AgNCs). The fluorescence of the AgNCs is found to be quenched by UO2(II) at pH 5.0 and Hg(II) at pH 7.0 due to combined static and dynamic quenching. Under the optimal conditions, the green fluorescence of the DNA-AgNCs, best measured at excitation/emission wavelengths of 420/525 nm, decreases in the 4.0 to 75 pM UO2(II) concentration range, and in the 0.3 to 8.0 nM Hg(II) concentration range. The respective detection limits are as low as 1.8 pM and 0.1 nM. The method was successfully applied to the determination of UO2(II) and Hg(II) in (spiked) pond and taps waters and in soil extracts. Graphical abstract A label-free DNA was designed to synthesize green-fluorescent silver nanoclusters (AgNCs) and used for rapid dual detection of uranyl ions (UO2(II)) at pH 5.0 and of mercury ions (Hg(II)) at pH 7.0 in environmental samples.

Assessing relative sensitivity of marine and freshwater bivalves following exposure to copper: Application of classical and novel genotoxicological biomarkers.

Determination of relative sensitivity of biota following exposures to contaminants including metals is important for environmental protection. Copper (Cu), although biologically essential can be highly toxic to biota if present at higher concentrations in the natural environment. Given its ubiquitous presence within coastal and inland water bodies, we compared Cu-induced genotoxicity in two ecologically important mussel species, the freshwater Dreissena polymorpha (DP) and marine Mytilus galloprovincialis (MG), along with its tissue specific accumulation. Novel biomarker in terms of induction of gamma H2AX (γ-H2AX) foci, along with comet assay and induction of micronuclei (MN) were used to determine DNA damage response (DDR) in these two species following exposure to a range of Cu concentrations (18, 32, 56 µg L-1) for 10 days. Concentration-dependent increases in Cu concentration in gill tissue, as determined by Inductively Coupled Plasma Mass Spectrometry (ICP-MS), were paralleled by a greater degree of genotoxicity. An induction of γ-H2AX foci was present in all Cu exposure concentrations, proving this technique to be a sensitive and suitable biomarker of genotoxicity in bivalves. The multi-biomarker approach adopted here suggests firstly that in parallel with MG, which is widely used to assess the health of marine and coastal environment, DP is also suitable representative of inland water bodies, and that there is a similar mechanism of action for the induction of genotoxicity between the two species, following exposure to Cu. Secondly, for genotoxicity assessment a battery of responses could simultaneously be assessed in these two bivalve species. Finally, for adequate protection of the environment it is vital to adopt a multi-biomarker, multi-species approach to determine adverse biological effects to gain a holistic understanding of the real threat posed by contaminants to hydrosphere.

Predicting non-point source of pollution in Maithon reservoir using a semi-distributed hydrological model.

Non-point source (NPS) pollution has been emerged as a major cause for reduced water quality of a lake due to increased human interference and disturbances in the natural condition of the surrounding catchment. The impact is, even more, worsening in the monsoon season when there is increased surface runoff. In the present study, an attempt has been made to predict the seasonal (monsoon) NPS loading in terms of sediment, nitrogen, and phosphorous in Maithon reservoir using Soil and Water Assessment Tool (SWAT) hydrologic model. The SWAT model was initially calibrated using monthly runoff and sediment yield data of monsoon period for the year 1998-2005 using observed data of Rajdhanwar station followed by its validation for the observed monthly runoff and sediment data from Giridih and Santrabad for the same duration. The calibrated SWAT model was used to predict the sediment, total nitrogen, and phosphorous influx in the Maithon reservoir. It has been observed that average sediment yield from different micro-watersheds varies from 0.231 to 7.458 ton/ha, while average monthly nitrogen and phosphorous yields vary from 0.224 to 1.377 kg/ha and 0.073 to 0.363 kg/ha, respectively, during the monsoon period. On the other hand, the net monthly average sediment yield and total nitrogen and phosphorous yields in the reservoir were found to be 1.53 M ton, 1834.2 kg, 191.1 kg, respectively. The results indicate there is a substantial influx of nutrients and sediments into the Maithon reservoir. The study not only provides insights on the potential NPS pollutant loading in the reservoir but also enables to identify the hotspot of NPS pollution where immediate mitigation measures have to be taken at priority basis.

Ferrocene-based nanoporous organic polymer as solid-phase extraction sorbent for the extraction of chlorophenols from tap water, tea drink and peach juice samples.

Ferrocene-based nanoporous organic polymer (Fc-NOP) was used as solid-phase extraction (SPE) adsorbent and showed excellent adsorption capacity for chlorophenols (CPs) compared with commercial C18 and multi-walled carbon nanotubes. Then, a SPE method with Fc-NOP packed cartridge combined with HPLC-UV detection was developed to determine CPs in tap water, black tea drinks and peach juice samples. Under optimal conditions, the detection limits of the method measured at the signal to noise ratio of 3 (S/N = 3) were 0.04-0.06 ng mL-1 for tap water and 0.10-0.20 ng mL-1 for black tea drinks and peach juice samples. Satisfactory method recoveries were achieved in the range of 87.6-119% with relative standard deviations of 3.11-7.83%. Result proved that this method was a sensitive and efficient method for determination of trace CPs in foods. The extraction result for more other compounds confirmed that the developed method had a great application potential for analysis of other trace pollutants in food samples.

Rational design and application of a fluorogenic chemodosimeter for selective detection of cyanide in an aqueous solution via excimer formation.

A new quinone-benzothiazole imine based chemodosimeter (R) was rationally designed, synthesized and characterized using NMR and mass spectral techniques. The receptor colorimetrically senses cyanide in aq. HEPES buffer: DMF (2:8 v/v) solution with an instantaneous colour change from yellow to bluish green. An enhancement of fluorescence intensity at 429 nm with excimer formation is also observed after addition of cyanide to the receptor, which is accompanied with a colour change from yellow to blue under UV lamp. Nucleophilic addition of cyanide to imine C-atom inhibits intra-molecular charge transfer (ICT) transition, which is responsible for the excimer formation. This chemical reaction is confirmed by 1H NMR titration. The receptor binds with two equivalents of cyanide with a binding constant of 5.55 × 104 M-1. The limit of detection (LOD) of cyanide by the receptor is found to be as low as 69 nM, which is much lower than the acceptable limit of cyanide in drinking water as set by the WHO (1.9 µM). Electrochemical studies support the termination of ICT transition upon addition of cyanide ion. Theoretical studies substantiate experimental findings and excimer formation. The receptor fluorometrically detects cyanide present in tap water and food materials such as cassava flour, almond and potato.

Bioprospecting microalgae from natural algal bloom for sustainable biomass and biodiesel production.

Natural algal bloom consists of promising algal species which could be a feasible option for the source of bulk biomass and biodiesel production. It has been found in five natural fresh water algal blooms (Uttar Pradesh, India), containing high nitrogen (N) (4.6 ± 0.32 mg/L) and phosphorus (P) (4.12 ± 0.29 mg/L) concentration during spring (23.9-25.9 °C) and summer season (32.0-35.0 °C). Among the isolated algae from naturally occurring bloom, Chlorella sorokiniana MKP01 exhibited highest biomass (1.02 ± 0.02 g/L) and lipid content (174.1 ± 9.6 mg/L) in untreated tap water and urea/single super phosphate (SSP) in the ratio (2:1). The biodiesel quality was assessed and found to be with the Indian and international standards. Algal bloom was artificially developed in the open pond containing 10,000 l tap water supplemented with Urea/SSP (2:1) for a consistent supply of bulk biomass, yielded 8 kg of total biomass and lipid 1.3 kg.