UV-Curable Bio-Based Pressure-Sensitive Adhesives: Tuning the Properties by Incorporating Liquid-Phase Alkali Lignin-Acrylates.

Renewable pressure-sensitive adhesive (PSA) is an emerging field in adhesive industries as it is an excellent green alternative to depleting petroleum-sourced adhesives. Herein, we report the development of novel bio-sourced UV-curable PSAs with ∼50% biomass content originating from alkali lignin, cardanol, and linseed oil. Bio-based prepolymers cardanoldiol acrylate (CDA) and acrylated epoxidized linseed oil (AELO) were synthesized and used to prepare polyurethane acrylate (PUA)-based PSA systems. Alkali-lignin-based acrylates (LAs) in the liquid phase were incorporated into the PUA/AELO PSA system at 10-30 wt % loading to tune the functional properties. The Fourier transform infrared spectroscopy (FTIR) analysis showed weakened cross-linking in the PSA systems on LA addition, which is desirable for removable PSA applications. The single glass-transition temperature (Tg) noticed in all of the PSA formulations revealed good miscibility among the oligomers/prepolymers. The viscoelastic window also confirmed that the incorporation of 10-20% LA could improve the viscoelastic properties effectively to be used as removable PSAs. The addition of 20% LA into the PUA-based PSA system showed reasonable tackiness, lap shear adhesion (166 kPa), and 180° peel strength (∼2.1 N/25 mm) for possible nonstructural or semistructural applications. Lignin improved the thermal stability by hindering the degradation rate even at higher temperatures. Therefore, lignin-based PSAs with a high bio-based content paved the way of replacing petro-sourced PSA by proper tuning of the lignin content and modifications.

Rubber Seed Oil-Based UV-Curable Polyurethane Acrylate Resins for Digital Light Processing (DLP) 3D Printing.

Novel UV-curable polyurethane acrylate (PUA) resins were developed from rubber seed oil (RSO). Firstly, hydroxylated rubber seed oil (HRSO) was prepared via an alcoholysis reaction of RSO with glycerol, and then HRSO was reacted with isophorone diisocyanate (IPDI) and hydroxyethyl acrylate (HEA) to produce the RSO-based PUA (RSO-PUA) oligomer. FT-IR and 1H NMR spectra collectively revealed that the obtained RSO-PUA was successfully synthesized, and the calculated C=C functionality of oligomer was 2.27 per fatty acid. Subsequently, a series of UV-curable resins were prepared and their ultimate properties, as well as UV-curing kinetics, were investigated. Notably, the UV-cured materials with 40% trimethylolpropane triacrylate (TMPTA) displayed a tensile strength of 11.7 MPa, an adhesion of 2 grade, a pencil hardness of 3H, a flexibility of 2 mm, and a glass transition temperature up to 109.4 °C. Finally, the optimal resin was used for digital light processing (DLP) 3D printing. The critical exposure energy of RSO-PUA (15.20 mJ/cm2) was lower than a commercial resin. In general, this work offered a simple method to prepare woody plant oil-based high-performance PUA resins that could be applied in the 3D printing industry.

Self-stick membrane based on grafted gum Arabic as active food packaging for cheese using cinnamon extract.

Encapsulation of volatile essential oils has been investigated to provide an active food packaging (AFP) material with more control over their fast release and pungent smell. In this work, Gum Arabic-based adhesive membrane was developed as a self-stick AFP material, delivering cinnamon essential oil (CEO) in vapor phase. Gum Arabic (GA) was grafted with butyl acrylate (BA) and hydroxyethyl methacrylate [GA-g-poly(BA-HEMA)]. Adhesive membrane was characterized by means of spectral, physicochemical and rheological analysis. GA-adhesive membrane made of 5% wt/v GA, 3.5 m mol HEMA, and 87 m mol BA with 21 N/m tack are loaded with 4, 8 and 10% v/v of CEO and used for antimicrobial bioassays. GA-g-poly(BA-HEMA) membrane prolonged CEO release up to 2 days. 8%v/v CEO showed superior activities against both Gram negative and positive bacteria. Shelf-life of cheese samples, packed with the self-stick membranes loaded with cinnamon extract, has extended from 3 to 8 weeks. Cheese samples that inoculated with shiga toxin producing E. coli O157:H7 and packed in plastic boxes with the self-stick AFP (4, 8 and 10 % CEO), showed significant reduction in the total bacteria counts.

Manipulation of the Glass Transition Properties of a High-Solid System Made of Acrylic Acid-N,N'-Methylenebisacrylamide Copolymer Grafted on Hydroxypropyl Methyl Cellulose.

Crosslinking of hydroxypropyl methyl cellulose (HPMC) and acrylic acid (AAc) was carried out at various compositions to develop a high-solid matrix with variable glass transition properties. The matrix was synthesized by the copolymerisation of two monomers, AAc and N,N'-methylenebisacrylamide (MBA) and their grafting onto HMPC. Potassium persulfate (K2S2O8) was used to initiate the free radical polymerization reaction and tetramethylethylenediamine (TEMED) to accelerate radical polymerisation. Structural properties of the network were investigated with Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), modulated differential scanning calorimetry (MDSC), small-deformation dynamic oscillation in-shear, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The results show the formation of a cohesive macromolecular entity that is highly amorphous. There is a considerable manipulation of the rheological and calorimetric glass transition temperatures as a function of the amount of added acrylic acid, which is followed upon heating by an extensive rubbery plateau. Complementary TGA work demonstrates that the initial composition of all the HPMC-AAc networks is maintained up to 200 °C, an outcome that bodes well for applications of targeted bioactive compound delivery.

Endogenous Enzymes Enable Antimicrobial Activity.

In light of the continued threat of antimicrobial-resistant bacteria, new strategies to expand the repertoire of antimicrobial compounds are necessary. Prodrugs are an underexploited strategy in this effort. Here, we report on the enhanced antimicrobial activity of a prodrug toward bacteria having an enzyme capable of its activation. A screen led us to the sulfurol ester of the antibiotic trans-3-(4-chlorobenzoyl)acrylic acid. An endogenous esterase makes Mycolycibacterium smegmatis sensitive to this prodrug. Candidate esterases were identified, and their heterologous production made Escherichia coli sensitive to the ester prodrug. Taken together, these data suggest a new approach to the development of antimicrobial compounds that takes advantage of endogenous enzymatic activities to target specific bacteria.

Non-Conventional Features of Plant Oil-Based Acrylic Monomers in Emulsion Polymerization.

In recent years, polymer chemistry has experienced an intensive development of a new field regarding the synthesis of aliphatic and aromatic biobased monomers obtained from renewable plant sources. A one-step process for the synthesis of new vinyl monomers by the reaction of direct transesterification of plant oil triglycerides with N-(hydroxyethyl)acrylamide has been recently invented to yield plant oil-based monomers (POBMs). The features of the POBM chemical structure, containing both a polar (hydrophilic) fragment capable of electrostatic interactions, and hydrophobic acyl fatty acid moieties (C15-C17) capable of van der Waals interactions, ensures the participation of the POBMs fragments of polymers in intermolecular interactions before and during polymerization. The use of the POBMs with different unsaturations in copolymerization reactions with conventional vinyl monomers allows for obtaining copolymers with enhanced hydrophobicity, provides a mechanism of internal plasticization and control of crosslinking degree. Synthesized latexes and latex polymers are promising candidates for the formation of hydrophobic polymer coatings with controlled physical and mechanical properties through the targeted control of the content of different POBM units with different degrees of unsaturation in the latex polymers.

Co-encapsulating CoFe2O4 and MTX for hyperthermia.

Magnetic manotheranostics can be a fascinating charm to diagnose a tumour with MRI, and treatment through hyperthermia. This study aims to synthesise and characterise magnetically responsive polymer colloids (MRPCs). Healthy tissue damage done by chemotherapy session could be minimised by MRPCs. For the colloidal formulation of MRPCs, the oil in water emulsion technique was employed with the aid of sonication and stirring. The organic phase of emulsion contained methotrexate (MTX) drug, Eudragit E100 and CoFe2O4 (synthesised by co-precipitation) in ethanol, and the aqueous phase contained tween 80 in deionised water. The emulsion was optimised by studying/adjusting two different parameters, i.e. the concentration of constituents and sonication cycles. Multiple formulations were produced at sonication amplitude of 60% at 20 kHz, followed by centrifugation and lyophilisation. Characterisation of MRPCs was done for morphology, size measurement (23-25 nm), surface charge (∼15.12), coercivity (∼1549.6 G), magnetisation (2.6 emu) and retentivity (1.34 emu). Drug release in simulating physiological environment (pH = 7.4), was observed for up to 48 h, and, to determine the best release kinetic mechanism results were compared with kinetic models. Magnetic hyperthermia studies showed that MRPCs achieved an acceptable temperature of 42°C, for hyperthermia treatments in cancer patients.

Cross-linked pH-sensitive pectin and acrylic acid based hydrogels for controlled delivery of metformin.

The purpose of present study is to load Metformin HCl into pH-sensitive hydrogels to have sustained release over a period of time. The hydrogel was synthesized from naturally occurring polysaccharide pectin and monomer acrylic acid (AA) using ethylene glycol dimethacrylate (EGDMA) as cross-linker under controlled conditions for polymerization at 45°C for one hr, 50°C for two hrs, 55°C for three hrs, 60°C for four hrs and finally 65˚C for 12 hrs. Hydrogels were characterized for dynamic/equilibrium swelling, sol-gel fraction analysis, diffusion coefficient and percentage porosity. Hydrogels were tested by FTIR, XRD and SEM for structure and surface morphology respectively. Experimental in-vitro drug release data was applied to kinetic models. Formation of strong bonding between pectin and AA was supported by FTIR. The intensity of XRD peaks was reduced in non-loaded and loaded hydrogels compared to active drug substance. The non-loaded hydrogel showed discrete porous structure whereas loaded hydrogels were fibrous and smooth. Hydrogels showed higher swelling in the solutions of pH 6.5 and 7.5 as compared to in the solutions of pH 1.2 and 5.5. The diffusion coefficient decreases with the increase of AA and pectin concentrations. It was observed upon increasing the EGDMA concentration porosity decreases. The release of drug from all compositions of hydrogels took place through non-Fickian diffusion mechanism.

Development of Topical Gel of Methotrexate Incorporated Ethosomes and Salicylic Acid for the Treatment of Psoriasis.

BACKGROUND: There is an unmet need for optimized drug delivery system of psoriasis therapy because of various issues like adverse reaction, permeation problem associated with convention treatment (oral and topical) available for psoriasis. OBJECTIVE: The goal was to develop an ethosomal gel of methotrexate (MTX)-incorporated ethosomes and salicylic acid (SA) and to evaluate and study its ethosomal gel potential in Imiquimod-induced psoriasis animal model to treat symptoms of psoriasis. METHODS: MTX-SA ethosomal gel was prepared by the cold method given by Touitou et al. and optimized by comparing it with MTX ethosomal gel and drug solution. Particle size, zeta potential, entrapment efficiency, and ex-vivo study were selected as the critical quality checking attributes. Psoriatic Area and Severity Index (PASI) score & histopathological examination were done for checking Antipsoriatic potential of MTX-SA ethosomal gel by using the imiquimod-induced psoriasis model. RESULTS: Optimized MTX-SA exhibited a particle size of 376.04 ± 3.47nm, EE(Entrapment efficiency) of 91.77 ± 0.02%. At the end of 24h, MTX-SA ethosomal gel exhibited a slow and prolonged release of MTX (26.13 ± 1.61% versus 6.97 ± 0.06%) compared to MTX drug solution. It also attributes of 43% retention study as compared to drug solution (13%). Besides, it essentially decreased the PASI score with the recuperation of normalcy of the mice's skin, while the MTX-SA gel displayed indications of gentle hyper and parakeratosis toward the completion of investigation when contrasted with the blank gel. CONCLUSION: The developed MTX-SA ethosomal gel formulation can be a promising alternative to existing MTX formulation in topically treating psoriasis.

Fabrication of a novel low-cost superoleophilic nonanyl chitosan-poly (butyl acrylate) grafted copolymer for the adsorptive removal of crude oil spills.

A novel superoleophilic-hydrophobic nonanyl chitosan-poly (butyl acrylate) grafted copolymer was fabricated as a low-cost oil-adsorbent. Chitosan (CS) was coupled with a hydrophobic nonanal (N) to form nonanyl chitosan (NCS) schiff base, and followed by grafting with butyl acrylate monomers (ButA). The grafted copolymer was characterized by FTIR, TGA and SEM tools. The grafting percent was augmented and reached 88.5% with increasing ButA concentration up to 156 mM. Moreover, measurements of contact angle proved the superoleophilic character of NCS-g-poly (ButA) copolymer with an oil-contact angle 31°. Factors affecting the removal process such as contact time, oil type, oil dose, adsorbent dose, temperature and agitation speed were optimized. An increment in the oil removal (%) was observed with increasing the oil viscosity in the order of gasoil < mobil-1 oil < light crude oil < heavy crude oil. Besides, the adsorption process followed the pseudo-second order model and the equilibrium data were sufficiently fitted with the Langmuir model with a maximum adsorption capacity 108.79 g/g at 25 °C. Thermodynamic parameters computed from Van't Hoff plot confirmed the process to be exothermic, favorable and spontaneous. The results nominate the superoleophilic adsorbent as a potential oil- adsorbent for petroleum oil spills removal.

Magnetically Actuated Degradable Microrobots for Actively Controlled Drug Release and Hyperthermia Therapy.

Microrobots facilitate targeted therapy due to their small size, minimal invasiveness, and precise wireless control. A degradable hyperthermia microrobot (DHM) with a 3D helical structure is developed, enabling actively controlled drug delivery, release, and hyperthermia therapy. The microrobot is made of poly(ethylene glycol) diacrylate (PEGDA) and pentaerythritol triacrylate (PETA) and contains magnetic Fe3 O4 nanoparticles (MNPs) and 5-fluorouracil (5-FU). Its locomotion is remotely and precisely controlled by a rotating magnetic field (RMF) generated by an electromagnetic actuation system. Drug-free DHMs reduce the viability of cancer cells by elevating the temperature under an alternating magnetic field (AMF), a hyperthermic effect. 5-FU is released from the proposed DHMs in normal-, high-burst-, and constant-release modes, controlled by the AMF. Finally, actively controlled drug release from the DHMs in normal- and high-burst-release mode results in a reduction in cell viability. The reduction in cell viability is of greater magnitude in high-burst- than in normal-release mode. In summary, biodegradable DHMs have potential for actively controlled drug release and hyperthermia therapy.

Development and application of an amylopectin-graft-poly(methyl acrylate) solidifier for rapid and efficient containment and recovery of heavy oil spills in aqueous environments.

Effective oil spill preparedness and response are crucial to ensure environmental protection and promote the responsible development of the petroleum industry. Hence, interest in developing new approaches and/or improving existing oil spill response measures has increased greatly in the past decade. Solidifiers are an attractive and underutilized option to mitigate the effects of oil spills, as they interact with oil to contain the spill, prevent it from spreading, and facilitate its removal from the environment. In this work, we have synthesized an inexpensive and easy-to-make natural-based sorbent, a subclass of solidifiers. Our amylopectin-graft-poly(methyl acrylate) (AP-g-PMA) sorbent is highly oleophilic and hydrophobic, and selectively solidifies diluted bitumen and conventional crude oil from biphasic mixtures of oil and water. The complete solidification of conventional crude oil and diluted bitumen by the AP-g-PMA sorbent occurs within 8 and 32 min, respectively, and even a low solidifier-to-oil ratio of 4% w/w is sufficient to enable complete recovery of diluted bitumen. This innovative natural-based polymeric sorbent may be applied as a key component of oil spill response procedures, especially for heavy oils. The AP-g-PMA sorbent combines the biodegradability and non-toxicity of the amylopectin with the hydrophobicity and oleophilicity of the synthetic polymer poly(methyl acrylate).

Formation and Investigation of Electrospun Eudragit E100/Oregano Mats.

An electrospun mat of Eudragit E100 (EE100) (a cationic copolymer based on dimethylaminoethyl methacrylate, butyl methacrylate, and methyl methacrylate) was used as a delivery system for oregano ethanolic extract (OEE). Oregano is a biologically active material which is widely used because of the antibacterial and antifungal activity. The oregano herb consists of phenolic compounds, the main of which are rosmarinic acid and from essential oil-carvacrol. Such a material could be an ideal candidate for oral drug systems. The influence of the EE100 concentration in the OEE on the structure of electrospun mats, encapsulation efficiency, dissolution profile, release kinetics and the stability of biologically active compounds was investigated. The concentration of the solution is a critical parameter for the structure and properties of electrospun mats. The diameter of electrospun fibers increased with the increase of EE100 concentration in the OEE. Electrospun mats obtained from 24% to 32% EE100 solutions showed high encapsulation efficiency, quick release and high stability of rosmarinic acid and carvacrol. Dissolution tests showed that 99% of carvacrol and 80% of rosmarinic acid were released after 10 min from electrospun nano-microfiber mats and capsules obtained from such formulations. The stability tests showed that physicochemical properties, dissolution profiles, and rosmarinic acid and carvacrol contents of the formulations were not significantly affected by storage.

Methylene blue removal by using pectin-based hydrogels extracted from dragon fruit peel waste using gamma and microwave radiation polymerization techniques.

This research aims to compare the ability of smart hydrogel in removing the methylene blue prepared by using two different radiation methods. The extracted pectin from the dragon fruit peel (Hylocereus polyrhizus) was used with acrylic acid (AA) to produce a polymerized hydrogel through gamma and microwave radiation. The optimum hydrogel swelling capacity was obtained by varying the dose of radiation, pectin to AA ratio and pH used. From the array of samples, the ideal hydrogel was obtained at pH 8 with a ratio of 2:3 (pectin: AA) using 10 kGy and 400 W radiated gamma and microwave respectively. The performance of both hydrogels namely as Pc/AA(G) (gamma) and Pc/AA(Mw) (microwave) were investigated using methylene blue (MB) adsorption studies. In this study, three variables were manipulated, pH and MB concentration and hydrogel mass in order to find the optimum condition for the adsorption. Results showed that 20 mg of Pc/AA(G) performed the highest MB removal which was about 45% of 20 mg/L MB at pH 8. While 30 mg of Pc/AA(Mw) able to remove up to 35% of 20 mg/L MB at the same pH condition. To describe the adsorption mechanism, both kinetic models pseudo-first-order, pseudo-second-order were employed. The results from kinetic data showed that it fitted the pseudo-first-order as compared to pseudo-second-order model equation. This study provides alternative of green, facile and affective biomaterial for dye absorbents that readily available.

Formulation and in vitro evaluation of directly compressed controlled release tablets designed from the Co-precipitates.

Controlled release dosage forms provide sustained therapeutics effects for prolonged period of time and improve patient compliance. In present study, controlled release co-precipitates of Metoprolol Tartrate and Losartan Potassium were prepared by solvent evaporation method using polymers such as Eudragit RL 100 and Carbopol 974PNF and controlled release tablets were directly compressed into tablets. In-vitro dissolution of controlled release co-precipitates were performed by USP Method-II (paddle method) and tablets were evaluated by USP Method-I (rotating basket method) in phosphate buffer (PH 6.8) using pharma test dissolution apparatus. The temperature was maintained constant at 37±1.0°C and the rotation speed of paddle and basket was kept constant at 100rpm. Drug release mechanisms were determined by applying Power Law kinetic model. The difference and similarity of dissolution profiles test formulations with reference standards were also determined by applying difference factor (f1) and similarity factor (f2). The results showed that the controlled release co-precipitates with polymer Eudragit RL 100 of both the drug extended the drug release rates for 10 hours and those having polymer Carbopol 974P NF extended the drug release rates for 12 hours. The controlled release tablets prepared from controlled release co-precipitates extended the drugs release up to 24 hours with both the polymers. The drug was released by all tests anomalous non fickian mechanism except F1 and F5 do not follow Power Law. The f1 and f2 values obtained were not in acceptable limits except F15 whose values were in acceptable limits. It is concluded from the present study that polymers (Eudragit RL 100 and Carbopol 974P NF) can be efficiently used in development of controlled release dosage forms having predictable kinetics.

Microwave assisted synthesis of binary grafted psyllium and its utility in anticancer formulation.

A binary grafted copolymer of Psyllium mucilage (Psy) with acrylic acid (AA) and acrylonitrile (An) has been successfully synthesized under microwave conditions for in vitro drug release study. The grafting was confirmed by FTIR spectroscopy, XRD, SEM, EDX, TGA analytical techniques and the intrinsic viscosity study. The swelling behavior of grafted material has been studied in solution of different pH and time. We also prepare Psy-g-Poly (AA-co-An) based beads with anti-cancer drug [(2-Chloro-3-(4-hydroxyphenylamino) naphthalene-1, 4-dione)]. The drug release behavior of Psy-g-Poly (AA-co-An) based beads has been determined in aqueous medium at different pH. It has been observed that highest drug release at pH 1.6. The drug release kinetics was analysed using the different models. This study demonstrates that the release of drug depends on the composition of beads and pH of release medium. Kinetics of drug release from beads is best fitted by zero order and first order model.

Protease-functionalized mucus penetrating microparticles: In-vivo evidence for their potential.

The focus of the current study was to explore whether immobilization of proteases to microparticles could result in their enhanced penetration into mucus. The proteases papain (PAP) and bromelain (BROM) were covalently attached to a polyacrylate (PAA; Carbopol 971P) via amide bond formation based on carbodiimide reaction. Microparticles containing these conjugates were generated via ionic gelation with calcium chloride and were characterized regarding size, surface charge, enzymatic activity and fluorescein diacetate (FDA) loading efficiency. Furthermore, mucus penetration potential of these microparticles was evaluated in-vitro on freshly collected porcine intestinal mucus, on intact intestinal mucosa and in-vivo in Sprague-Dawley rats. Results showed mean diameter of microparticles ranging between 2-3µm and surface charge between -8 to -18mV. The addition of PAA-microparticles to porcine intestinal mucus led to a 1.39-fold increase in dynamic viscosity whereas a 3.10- and 2.12-fold decrease was observed in case of PAA-PAP and PAA-BROM microparticles, respectively. Mucus penetration studies showed a 4.27- and 2.21- fold higher permeation of FDA loaded PAA-PAP and PAA-BROM microparticles as compared to PAA microparticles, respectively. Extent of mucus diffusion determined via silicon tube assay illustrated 3.96- fold higher penetration for PAA-PAP microparticles and 1.99- fold for PAA-BROM microparticles. An in-vitro analysis on porcine intestinal mucosa described up to 16- and 7.35-fold higher degree of retention and furthermore, during in-vivo evaluation in Sprague-Dawley rats a 3.35- and 2.07-fold higher penetration behavior was observed in small intestine for PAA-PAP and PAA-BROM microparticles as compared to PAA microparticles, respectively. According to these results, evidence for microparticles decorated with proteases in order to overcome the mucus barrier and to reach the absorption lining has been provided that offers wide ranging applications in mucosal drug delivery.

Synthesis and characterization of psyllium seed mucilage grafted with N,N-methylene bisacrylamide.

Psyllium seed polysaccharide was modified to investigate its use as multifunctional pharmaceutical excipient. The objective of this study was isolation of psyllium seed polysaccharide and crosslinking with acrylic acid using N,N-methylene bisacrylamide and its characterization. Acrylic acid was used as monomer and ammonium persulfate as initiator. A full factorial design was employed to optimize the crosslinking. The modified polysaccharide was characterized by FTIR, DSC, PXRD, loss on drying, pH, viscosity, micromeritics properties and swelling studies in 0.1N HCl, 0.5N NaOH, phosphate buffer pH 6.8. It was observed that swelling of crosslinked polysaccharide increased with decreased concentration of monomer and increasing concentration of crosslinker. Greater degree of grafting was observed with increase in crosslinker and monomer concentration. Dispersions of 1% w/v of PPS and APPS show pseudoplastic behavior. No clinical signs of toxicity were evident in repeat dose toxicity studies conducted in rats. Administration of up to 350mg/kg/day of APPS was well tolerated by the animals. Modification of psyllium via graft copolymerization and network formation with the crosslinker, improved the property profile and utility of psyllium polysaccharide. The modified polysaccharide can be used for designing controlled release drug delivery systems due to its swelling ability.

Synthesis of 16 New Hybrids from Tetrahydropyrans Derivatives and Morita-Baylis-Hillman Adducts: In Vitro Screening against Leishmania donovani.

Leishmaniases are a group of neglected tropical diseases (NTDs) caused by protozoan parasites from >20 Leishmania species. Visceral leishmaniasis (VL), also known as kala-aza, is the most severe form of leishmaniasis, usually fatal in the absence of treatment in 95% of cases. The Morita-Baylis-Hillman adducts (MBHAs) are being explored as drug candidates against several diseases, one of them being leishmaniasis. We present here the design, synthesis and in vitro screening against Leishmania donovani of sixteen new molecular hybrids from analgesic/antiinflammatory tetrahydropyrans derivatives and Morita-Baylis-Hillman adducts. First, acrylates were synthesized from analgesic/anti-inflammatory tetrahydropyrans using acrylic acid under TsOH as a catalyst (70-75% yields). After the 16 new MBHAs were prepared in moderate to good yields (60-95%) promoted by microwave irradiation or low temperature (0 °C) in protic and aprotic medium. The hybrids were evaluated in vitro on the promastigote stage of Leishmania donovani by determining their inhibitory concentrations 50% (IC50), 50% hemolysis concentration (HC50), selectivity index (HC50/IC50,), and comparing to Amphotericin B, chosen as the anti-leishmanial reference drug. The hybrid which presents the bromine atom in its chemical structure presents high leishmanicide activity and the high selectivity index in red blood cells (SIrb > 180.19), compared with the highly-toxic reference drug (SIrb = 33.05), indicating that the bromine hybrid is a promising compound for further biological studies.

Synthesis and In Vitro Anti Leishmania amazonensis Biological Screening of Morita-Baylis-Hillman Adducts Prepared from Eugenol, Thymol and Carvacrol.

Leishmaniasis represents a series of severe neglected tropical diseases caused by protozoa of the genus Leishmania and is widely distributed around the world. Here, we present the syntheses of Morita-Baylis-Hillman adducts (MBHAs) prepared from eugenol, thymol and carvacrol, and their bioevaluation against promastigotes of Leishmania amazonensis. The new MBHAs are prepared in two steps from essential oils in moderate to good yields and present IC50 values in the range of 22.30-4.71 µM. Moreover, the selectivity index to the most potent compound is very high (SIrb > 84.92), far better than that of Glucantime® (SIrb 1.39) and amphotericin B (SIrb = 22.34). Conformational analysis were carried out at the M062X//6-31+G(d,p) level of theory to corroborate a hypothesis about the nitroaromatic bioreduction mechanism.