Iron from nanostructured ferric phosphate: absorption and biodistribution in mice and bioavailability in iron deficient anemic women.

Food fortification with iron nanoparticles (NPs) could help prevent iron deficiency anemia, but the absorption pathway and biodistribution of iron-NPs and their bioavailability in humans is unclear. Dietary non-heme iron is physiologically absorbed via the divalent metal transporter-1 (DMT1) pathway. Using radio- iron isotope labelling in mice with a partial knockdown of intestine-specific DMT1, we assessed oral absorption and tissue biodistribution of nanostructured ferric phosphate (FePO4-NP; specific surface area [SSA] 98 m2g-1) compared to to ferrous sulfate (FeSO4), the reference compound. We show that absorption of iron from FePO4-NP appears to be largely DMT1 dependent and that its biodistribution after absorption is similar to that from FeSO4, without abnormal deposition of iron in the reticuloendothelial system. Furthermore, we demonstrate high bioavailability from iron NPs in iron deficient anemic women in a randomized, cross-over study using stable-isotope labelling: absorption and subsequent erythrocyte iron utilization from two 57Fe-labeled FePO4-NP with SSAs of 98 m2g-1 and 188 m2g-1 was 2.8-fold and 5.4-fold higher than from bulk FePO4 with an SSA of 25 m2g-1 (P < 0.001) when added to a rice and vegetable meal consumed by iron deficient anemic women. The FePO4-NP 188 m2g-1 achieved 72% relative bioavailability compared to FeSO4. These data suggest FePO4-NPs may be useful for nutritional applications.

Serum apolipoprotein A-I depletion is causative to silica nanoparticles-induced cardiovascular damage.

The rapid development of nanotechnology has greatly benefited modern science and engineering and also led to an increased environmental exposure to nanoparticles (NPs). While recent research has established a correlation between the exposure of NPs and cardiovascular diseases, the intrinsic mechanisms of such a connection remain unclear. Inhaled NPs can penetrate the air-blood barrier from the lung to systemic circulation, thereby intruding the cardiovascular system and generating cardiotoxic effects. In this study, on-site cardiovascular damage was observed in mice upon respiratory exposure of silica nanoparticles (SiNPs), and the corresponding mechanism was investigated by focusing on the interaction of SiNPs and their encountered biomacromolecules en route. SiNPs were found to collect a significant amount of apolipoprotein A-I (Apo A-I) from the blood, in particular when the SiNPs were preadsorbed with pulmonary surfactants. While the adsorbed Apo A-I ameliorated the cytotoxic and proinflammatory effects of SiNPs, the protein was eliminated from the blood upon clearance of the NPs. However, supplementation of Apo A-I mimic peptide mitigated the atherosclerotic lesion induced by SiNPs. In addition, we found a further declined plasma Apo A-I level in clinical silicosis patients than coronary heart disease patients, suggesting clearance of SiNPs sequestered Apo A-I to compromise the coronal protein's regular biological functions. Together, this study has provided evidence that the protein corona of SiNPs acquired in the blood depletes Apo A-I, a biomarker for prediction of cardiovascular diseases, which gives rise to unexpected toxic effects of the nanoparticles.

Pectin/lignocellulose nanofibers/chitin nanofibers bionanocomposite as an efficient biosorbent of cholesterol and bile salts.

A new biosorbent Ca-crosslinked pectin/lignocellulose nanofibers/chitin nanofibers (PLCN) was synthesized for cholesterol and bile salts adsorption from simulated intestinal fluid during gastric-intestinal passage. The physico-chemical properties of PLCN were studied using SEM, FTIR, XRD, DSC and BET. Before gastrointestinal passage, PLCN had an amorphous single-phase, compact structure formed via hydrogen and van der Waals bonds that revealed an irregular shape with the shriveled surface but watery condition and enzymatic digestion led to create a porous structure without destruction because of the water-insoluble nanofibers, therefore increasing the adsorption capacity. The maximum adsorption capacity reached 37.9 and 5578.4 mg/g for cholesterol and bile salts, respectively. Freundlich isotherm model indicated the reversible heterogeneous adsorption of both cholesterol and bile salts on PLCN. Further, their adsorption followed pseudo-second order kinetic model. These results suggest that PLCN has potential as a gastrointestinal-resistant biosorbent for cholesterol and bile salts adsorption applicable in medicine and food industry.

The Nature of the Increased Efficiency of Sorption-Stimulating Preparations Containing Non-Ionic Surfactants for Pre-Sowing Seed Treatment.

The effect of the introduction of a non-ionogenic surfactant Polysorbate 20 into a sorption preparation (CB-H-BYA) on the structure of sorbent layers formed on the surface of spring wheat seeds during their pre-sowing treatment has been studied using electron microscopy. According to the results, an increase in the efficiency of sorption preparations containing Polysorbate 20 is based on an intensification of the bentonite aggregate disintegration into individual montmorillonite particles and a formation of more dense protective sorption layer providing a better protection of seeds against allelotoxins on the seed surface. The introduction of non-ionogenic surfactants into the preparation increases a sorption capacity of a bentonite-humus complex that results in a decreased gibberellin activity in a solution. Therefore, to achieve the maximum physiological activity of gibberellin in a preparation solution, it is necessary to increase its concentration from 100 to 300 mg/L. As a result, the stimulating effect increases from 36 to 55%.

Adsorption capacity and cold-water solubility of honeycomb-like potato starch granule.

Honeycomb-like granules, with 2-4 µm pores on the surface, were prepared by heating potato starch suspensions in water at the pasting temperature. These granules with a yield of 84% were most amorphous (relative crystallinity 1.9%). Their total pore area was 0.668 m2/g, porosity was 73.4%, and mean particle size (D50) was 154.3 µm. The molecular weights (MW) of honeycomb-like granules were: amylopectin, 8.7 × 107 g/mol; amylose, 3.1 × 105 g/mol, close to those of native starch. The chain length distribution profiles of honeycomb-like granules were similar to those of native starch, while the proportions of B2 and B3 chains were higher. The water and oil adsorption of honeycomb-like granules were about 1.5 and 2.4 times those of native starch, respectively; and the cold water solubility of honeycomb-like granules was 88.5%, while native starch showed no solubility in cold water. Thus honeycomb-like starch granules have the potential to be applied as adsorbents, thickeners and adhesives for their dispersibility, adsorption capacity and cold water solubility.

Glaucoma Drainage Device Coated with Mitomycin C Loaded Opal Shale Microparticles to Inhibit Bleb Fibrosis.

Excessive fibrosis is the topmost factor for the defeat of surgical glaucoma drainage device (GDD) implantation. Adjuvant drug approaches are promising to help reduce the scar formation and excessive fibrosis. Opal shale (OS), as a natural state and noncrystalline silica substance with poriferous nature and strong adsorbability, is highly likely to undertake drug loading and delivery. Here, we employed OS microparticles (MPs) by ultrasound and centrifugation and presented an innovative and improved GDD coated with OS MPs, which were loaded with mitomycin C (MMC). MMC-loaded OS MPs were physically absorbed on the Ahmed glaucoma valve surface through OS' adsorbability. About 5.51 µg of MMC was loaded on the modified Ahmed glaucoma valve and can be released for 18 days in vitro. MMC-loaded OS MPs inhibited fibroblast proliferation and showed low toxicity to primary Tenon's fibroblasts. The ameliorated drainage device was well tolerated and effective in reducing the fibrous reaction in vivo. Hence, our study constructed an improved Ahmed glaucoma valve using OS MPs without disturbing aqueous humor drainage pattern over the valve surface. The modified Ahmed glaucoma valve successfully alleviated scar tissue formation after GDD implantation surgery.

Spray Dried Smectite Clay Particles as a Novel Treatment against Obesity.

PURPOSE: To explore the feasibility of spray dried smectite clay particles fabricated from montmorillonite or laponite materials for adsorbing dietary lipids and reducing rodent weight gain in vivo. METHODS: Spray dried montmorillonite (SD-MMT) and spray dried laponite (SD-LAP) particles were prepared via spray drying. Particle morphology, surface area and redispersion/aggregation properties in aqueous media were characterized. The ability of SD-MMT and SD-LAP particles to inhibit lipid digestion kinetics and adsorb lipid species from solution was assessed during in vitro lipolysis using proton nuclear magnetic resonance analysis. SD-MMT and SD-LAP particles were dosed to rodents fed a high-fat diet and their effect on body weight gain was evaluated. RESULTS: Both SD-MMT and SD-LAP particles adsorbed significant quantities of medium chain triglycerides and lipolytic products from solution during in vitro lipolysis. At a concentration of 50% w/w relative to lipid content, SD-MMT and SD-LAP particles adsorbed 42% and 94% of all lipid species, respectively. SD-MMT and SD-LAP particles also reduced the extent of rodent weight gain relative to the negative control treatment group and performed similarly to orlistat via an alternate mechanism of action. CONCLUSIONS: Spray dried smectite clay particles (SD-MMT and SD-LAP) with significant adsorptive capacities for dietary lipids and digestion products were successfully fabricated. These particles may be developed as novel anti-obesity treatments with fewer adverse effects than currently marketed treatment options.

DNA-Hybridization Detection on Si(100) Surfaces Using Light-Activated Electrochemistry: A Comparative Study between Bovine Serum Albumin and Hexaethylene Glycol as Antifouling Layers.

Light can be used to spatially resolve electrochemical measurements on a semiconductor electrode. This phenomenon has been explored to detect DNA hybridization with light-addressable potentiometric sensors and, more recently, with light-addressable amperometric sensors based on organic-monolayer-protected Si(100). Here, a contribution to the field is presented by comparing sensing performances when bovine serum albumin (BSA) and hexaethylene glycol (OEG6) are employed as antifouling layers that resist nonspecific adsorption to the DNA-modified interface on Si(100) devices. What is observed is that both sensors based on BSA or OEG6 initially allow electrochemical distinction among complementary, noncomplementary, and mismatched DNA targets. However, only surfaces based on OEG6 can sustain electroactivity over time. Our results suggest that this relates to accelerated SiO x formation occasioned by BSA proteins adsorbing on monolayer-protected Si(100) surfaces. Therefore, DNA biosensors were analytically explored on low-doped Si(100) electrodes modified on the molecular level with OEG6 as an antifouling layer. First, light-activated electrochemical responses were recorded over a range of complementary DNA target concentrations. A linear semilog relation was obtained from 1.0 × 10-11 to 1.0 × 10-6 mol L-1 with a correlation coefficient of 0.942. Then, measurements with three independent surfaces indicated a relative standard deviation of 4.5%. Finally, selectivity tests were successfully performed in complex samples consisting of a cocktail mixture of four different DNA sequences. Together, these results indicate that reliable and stable light-activated amperometric DNA sensors can be achieved on Si(100) by employing OEG6 as an antifouling layer.

Reduction of heavy metal (Pb2+) biosorption in zebrafish model using alginic acid purified from Ecklonia cava and two of its synthetic derivatives.

Heavy metal contamination has become a major problem that causes severe environmental and health issues due to their biosorption, bioaccumulation, and toxicity. This study was designed to evaluate heavy metal chelating abilities of alginic acid (AA) extracted from the brown seaweed Ecklonia cava and two of its derivatives prepared by the partial oxidation of the 2° OH groups (OAA) and partial carboxylation of the monomeric units (CAA) upon reducing the heavy metal biosorption in zebrafish (Danio rerio) modal. Metal ions were quantified using ICP-OES and biopolymers were characterized by FTIR and XRD analysis. All investigated biopolymers indicated potential ability for chelating Pb2+, Cu2+, Cd2+, As3+, and Ag+. The sorption capacities were in the order of CAA>OAA>AA. All biopolymers indicated a comparatively higher chelation towards Pb2+. AA, OAA, and CAA could effectively reduce Pb2+ induced toxicity and Pb2+ stress-induced ROS production in zebrafish embryos. Besides, they could reduce the biosorption of Pb2+ in adult zebrafish which could lead to bioaccumulation. Since alginic acid purified from E. cava and its derivatives could be utilized as seaweed derived biopolymers to purify heavy metals contaminated water and as a dietary supplement to reduce heavy metal biosorption in organisms.

Influence of silver content on rifampicin adsorptivity for magnetite/Ag/rifampicin nanoparticles.

Magnetite nanoparticles (NPs) decorated with silver (magnetite/Ag) are intensively investigated due to their application in the biomedical field. We demonstrate that the increase of silver content on the surface of nanoparticles improves the adsorptivity of antibiotic rifampicin as well as antibacterial properties. The use of ginger extract allowed to improve the silver nucleation on the magnetite surface that resulted in an increase of silver content. Physicochemical and functional characterization of magnetite/Ag NPs was performed. Our results show that 5%-10% of silver content in magnetite/Ag NPs is already sufficient for antimicrobial properties against Streptococcus salivarius and Staphylococcus aureus. The rifampicin molecules on the magnetite/Ag NPs surface made the spectrum of antimicrobial activity wider. Cytotoxicity evaluation of the magnetite/Ag/rifampicin NPs showed no harmful action towards normal human fibroblasts, whereas the effect on human embryonic kidney cell viability was time and dose dependent.

Nutrient depletion modifies cell wall adsorption activity of wine yeast.

Yeast cell wall is a structure that helps yeasts to manage and respond to many environmental stresses. The mannosylphosphorylation is a modification in response to stress that provides the cell wall with negative charges able to bind compounds present in the environment. Phenotypes related to the cell wall modification such as the filamentous growth in Saccharomyces cerevisiae are affected by nutrient depletion. The present work aimed at describing the effect of carbon and/or nitrogen limitation on the aptitude of S. cerevisiae strains to bind coloured polyphenols. Carbon- and nitrogen-rich or deficient media supplemented with grape polyphenols were used to simulate different grape juice conditions-early, mid, 'adjusted' for nitrogen, and late fermentations. In early fermentation condition, the R+G+B values range from 106 (high adsorption, strain Sc1128) to 192 (low adsorption, strain Σ1278b), in mid-fermentation the values range from 111 (high adsorption, strain Sc1321) to 258 (low adsorption, strain Sc2306), in 'adjusted' for nitrogen conditions the values range from 105 (high adsorption, strain Sc1321) to 194 (low adsorption, strain Sc2306) while in late fermentation conditions the values range from 101 (high adsorption, strain Sc384) to 293 (low adsorption, strain Sc2306). The effect of nutrient availability is not univocal for all the strains and the different media tested modified the strains behaviour. In all the media the strains show significant differences. Results demonstrate that wine yeasts decrease/increase their parietal adsorption activity according to the nutrient availability. The wide range of strain variability observed could be useful in selecting wine starters.

MC3T3-E1 cell response to stainless steel 316L with different surface treatments.

In the present study, stainless steel 316L samples with polishing, aluminum oxide blasting, and hydroxyapatite (HA) coating were prepared and characterized through a scanning electron microscope (SEM), optical interferometer (surface roughness, Sq), contact angle, surface composition and phase composition analyses. Osteoblast-like MC3T3-E1 cell adhesion on the samples was investigated by cell morphology using a SEM (4h, 1d, 3d, 7d), and cell proliferation was assessed by MTT method at 1d, 3d, and 7d. In addition, adsorption of bovine serum albumin on the samples was evaluated at 1h. The polished sample was smooth (Sq: 1.8nm), and the blasted and HA coated samples were much rougher (Sq: 3.2µm and 7.8µm). Within 1d of incubation, the HA coated samples showed the best cell morphology (e.g., flattened shape and complete spread), but there was no significant difference after 3d and 7d of incubation for all the samples. The absorbance value for the HA coated samples was the highest after 1d and 3d of incubation, indicating better cell viability. However, it reduced to the lowest value at 7d. Protein adsorption on the HA coated samples was the highest at 1h. The results indicate that rough stainless steel surface improves cell adhesion and morphology, and HA coating contributes to superior cell adhesion, but inhibits cell proliferation.

Effects of ß-glucan on some environmental toxins: An overview.

BACKGROUND: Beta-glucans are naturally occurring polysaccharides and constituents of the cell wall of certain pathogenic bacteria and fungi. They have proven healing and immunostimulating properties, linked to enhanced macrophage and natural killer cell function which likely involves specific interaction with several cell surface receptors, such as lactosylceramide, selected scavenger receptors, and dectin-1 (betaGR). In particular, glucan reduces the immunosuppressive effects of a number of agents including chemo therapy and radiation. More recent studies suggest a positive function for glucan in the immunosuppression caused by toxic agents in the environment. AIM: An overview of the effects of glucan on the mycotoxin, aflotoxin and other environmental toxins (mercury-thimerosal, depleted uranium). CONCLUSION: Glucan is effective as a natural immunomodulator and could be used as an inexpensive solution to reducing the adverse effects of some environmental toxins.

Alumina-zirconia composites functionalized with laminin-1 and laminin-5 for dentistry: effect of protein adsorption on cellular response.

The present paper describes a study on laminin interaction with the surface of two alumina-zirconia composites with different percentages of ZrO2, both with submicrometric grain size. As major molecules within the basement membrane (BM), laminins are important protein fragments for epithelial cell adhesion and migration. On the other hand, alumina-zirconia composites are very attractive materials for dental applications due to their esthetic and mechanical properties. X-Ray photoelectron spectroscopy and atomic force microscopy were used to study the adsorption of two types of laminin, laminin-1 (Ln-1) and laminin-5 (Ln-5), onto the ceramics surfaces. The in vitro cell response was determined by intracellular phosphorylation of major kinases. Ceramics samples functionalized with laminins showed better cellular activation than untreated specimens; furthermore, cellular activation was found to be greater for the composite with higher percentage in zirconia when functionalized with Ln-5, whereas the adsorption of Ln-1 resulted in a greater activation for the alumina-rich oxide.

Study on bioadsorption and biodegradation of petroleum hydrocarbons by a microbial consortium.

A microbial consortium isolated from Shengli oilfield polluted sludge was capable of degrading naphthalene (NAP), phenanthrene (PHE), pyrene (PYR) and crude oil. It performed high biodegradation activity and emulsifiability for petroleum hydrocarbons, and was tolerant to 6.2mM Cu(2+), 2.7 mM Zn(2+) and 9.5mM Pb(2+). Biodegradation rates of NAP, PHE, PYR and crude oil were 53%, 21%, 32% and 44% in the presence of heavy metal (Cu(2+), 1.7 mM and Zn(2+), 2mM), respectively. Exploration on the adsorption and uptake of petroleum hydrocarbons by microbe suggested the stability of surface adsorption and cell uptake by live microbial consortium followed a decreasing order of NAP > PHE ≈ PYR > crude oil. The adsorption by heat-killed microbial consortium was constant for PAHs, while decreased for crude oil. Experiments on enzymatic degradation indicated that the metabolic efficiency of periplasmic, cytoplasmic and extracellular enzymes secreted by the microbial consortium for diverse substrates was different.

The role of surface functionalization of colloidal alumina particles on their controlled interactions with viruses.

Materials that interact in a controlled manner with viruses attract increasing interest in biotechnology, medicine, and environmental technology. Here, we show that virus-material interactions can be guided by intrinsic material surface chemistries, introduced by tailored surface functionalizations. For this purpose, colloidal alumina particles are surface functionalized with amino, carboxyl, phosphate, chloropropyl, and sulfonate groups in different surface concentrations and characterized in terms of elemental composition, electrokinetic, hydrophobic properties, and morphology. The interaction of the functionalized particles with hepatitis A virus and phages MS2 and PhiX174 is assessed by virus titer reduction after incubation with particles, activity of viruses conjugated to particles, and imaged by electron microscopy. Type and surface density of particle functional groups control the virus titer reduction between 0 and 99.999% (5 log values). For instance, high sulfonate surface concentrations (4.7 groups/nm(2)) inhibit attractive virus-material interactions and lead to complete virus recovery. Low sulfonate surface concentrations (1.2 groups/nm(2)), native alumina, and chloropropyl-functionalized particles induce strong virus-particle adsorption. The virus conformation and capsid amino acid composition further influence the virus-material interaction. Fundamental interrelations between material properties, virus properties, and the complex virus-material interaction are discussed and a versatile pool of surface functionalization strategies controlling virus-material interactions is presented.

Relationship between polyphenol content and anti-influenza viral effects of berries.

BACKGROUND: Berries are known to have many kinds of biological activities. We focused on their antiviral effect, which has not yet been well evaluated. RESULTS: We compared the anti-influenza viral effects of berries belonging to the genus Vaccinium - 35 species of blueberry (Vaccinium cyanococcus), the Natsuhaze (Vaccinium oldhamii), bilberry (Vaccinium myrtillus) and cranberry (Vaccinium oxycoccos)- with those belonging to the genus Ribes, i.e. blackcurrant (Ribes nigrum). Only Elliott and Legacy among Northern Highbush varieties but many Rabbiteye varieties such as Austin, Baldwin, Brightblue, Festival, T-100 and Tifblue showed anti-influenza viral activity. Natsuhaze, bilberry, cranberry and blackcurrant had high antiviral effects. A relationship was observed between the antiviral effect and total polyphenol content. CONCLUSIONS: Antiviral effects were found to differ markedly between berry species. Rabbiteye varieties tended to have higher antiviral effects than Northern, Southern and Half Highbush blueberry varieties. We also found that Natsuhaze, which has recently been harvested in Japan as a potential functional food, had an antiviral effect comparable to that of bilberry, cranberry and blackcurrant. There was a positive relationship between antiviral activity and polyphenol content, indicating the possibility that polyphenol is one of the key factors in the antiviral effects of berries.

[Sodium-glucose co-transporter-2 inhibitors: from the bark of apple trees and familial renal glycosuria to the treatment of type 2 diabetes mellitus]. / Inhibidores SGLT-2: de la corteza del manzano y la glucosuria familiar al tratamiento de la diabetes mellitus tipo 2.

The therapeutic armamentarium for the treatment of hyperglycemia in type 2 diabetes mellitus is still inadequate. We are currently witnessing the introduction of a new mode of hypoglycemic treatment through induction of glycosuria to decrease the availability of the metabolic substrate, i.e. glucose. Clinical trials have shown that sodium-glucose co-transporter-2 (SGLT2) inhibitors are as efficacious as other oral hypoglycemic drugs. This article discusses the basic features of this new treatment concept and the efficacy and safety of this new drug group.

Mineralization induction effects of osteopontin, bone sialoprotein, and dentin phosphoprotein on a biomimetic collagen substrate.

Native bone tissue is composed of a matrix of collagen, noncollagenous proteins, and calcium phosphate minerals, which are primarily hydroxyapatite. The SIBLING (small integrin-binding ligand, N-linked glycoprotein) family of proteins is the primary noncollagenous protein group found in mineralized tissues. In this work, the mineralization induction capabilities of three of the SIBLING members, bone sialoprotein (BSP), osteopontin (OPN), and the calcium-binding subdomain of dentin sialophosphoprotein, dentin phosphoprotein (DPP), are directly compared on a biomimetic collagen substrate. A self-assembled, loosely aligned collagen fibril substrate was prepared, and then (125) I-radiolabeled adsorption isotherms were developed for BSP, OPN, and DPP. The results showed that BSP exhibited the highest binding capacity for collagen at lower concentrations, followed by DPP and OPN. However, at the highest concentrations, all three proteins had similar adsorption levels. The adsorption isotherms were then used to identify conditions that resulted in identical amounts of adsorbed protein. These substrates were prepared and placed in simulated body fluid for 5, 10, and 24 h at 37°C. The resulting mineral morphology was assessed by atomic force microscopy, and the composition was determined using photochemical assays. Mineralization was seen in the presence of all the proteins. However, DPP was seen to be the only protein that formed individual mineral nodules similar to those seen in developing bone. This suggests that DPP plays a significant role in the biomineralization process and that the incorporation of DPP into tissue engineering constructs may facilitate the induction of biomimetic mineral formation.

Biophysical methods for assessing plant responses to nanoparticle exposure.

As nanotechnology rapidly emerges into a new industry-driven by its enormous potential to revolutionize electronics, materials, and medicine-exposure of living species to discharged nanoparticles has become inevitable. Despite the increased effort on elucidating the environmental impact of nanotechnology, literature on higher plants exposure to nanoparticles remains scarce and often contradictory. Here we present our biophysical methodologies for the study of carbon nanoparticle uptake by Allium cepa cells and rice plants. We address the three essential aspects for such studies: identification of carbon nanoparticles in the plant species, quantification of nanotransport and aggregation in the plant compartments, and evaluation of plant responses to nanoparticle exposure on the cellular and organism level. Considering the close connection between plant and mammalian species in ecological systems especially in the food chain, we draw a direct comparison on the uptake of carbon nanoparticles in plant and mammalian cells. In addition to the above studies, we present methods for assessing the effects of quantum dot adsorption on algal photosynthesis.