Physicochemical properties and in vitro digestibility of ginseng starches under citric acid-autoclaving treatment.

In this study, the effects of citric acid-autoclaving (CA-A) treatment on physicochemical and digestive properties of the native ginseng starches were investigated. The results showed that ginseng starch exhibited a B-type crystal structure with a low onset pasting temperature of 44.23 ± 0.80 °C, but high peak viscosity and setback viscosity of 5897.34 ± 53.72 cP and 692.00 ± 32.36 cP, respectively. The granular morphology, crystal and short-range ordered structure of ginseng starches were destroyed after CA-A treatment. The more short-chain starches were produced, resulting in the ginseng starches solubility increased. In addition, autoclaving, citric acid (CA) and CA-A treatment promoted polymerization and recrystallization of starch molecules, increased the proportion of amylopectin B1, and B3 chains, and improved molecular weight and resistant starch (RS) content of ginseng starches. The most significant multi-scale structural change was induced by CA-A treatment, which reduced the relative crystallinity of ginseng starch from 28.26 ± 0.24 % to 2.75 ± 0.08 %, and increased the content of RS to 54.30 ± 0.14 %. These findings provided a better understanding of the structure and properties of Chinese ginseng starches and offered new ideas for the deep processing of ginseng foods.

Interactions of hsian-tsao polysaccharide with corn starch to reduce its in vitro digestibility.

Hsian-tsao polysaccharide (HP) with preferable bioactivities was used to produce starchy gel foods. This study elucidated how interactions of HP (0-0.6 %, w/v) with gelatinized corn starch (CS, 6 %, w/v) reduced in vitro digestibility of CS. The CS digestibility (82.85 %, without HP) was reduced to 68.85 % (co-heated) and 74.75 % (non-co-heated) when 0.6 % HP was added, demonstrating that HP reduced the CS digestibility to a larger extent under co-heating by both HP-CS interactions and inhibiting digestive enzyme activities by HP which was dominated under non-co-heating. Moreover, when co-heated, HP bonded to the amylose of CS via physical forces with a composite index of 21.95 % (0.4 % HP), impeded CS swelling and promoted CS aggregation with the average particle size increased to 42.95 µm (0.6 % HP). Also, the HP-CS complexes formed strong association network structures that increased their apparent viscosity and digestive fluid viscosity. Additionally, HP enhanced the short-range ordered structure and crystal structure of CS. These results evidenced that HP-CS interactions significantly reduced the CS digestibility by forming physical barriers, viscosity effects, and ordered structures, to hinder the enzymes from accessing starch matrices. This laid a foundation for applying HP to starchy foods with a low predicted glycemic index.

Impact of cyclic and continuous dry heat modification on the structural, thermal, technological, and in vitro digestibility properties of potato starch (Solanum tuberosum L.): A comparative study.

Dry heat treatment (DHT) has been demonstrated as a viable method for starch modification, offering benefits due to its environmentally friendly process and low operational costs. This research modified potato starch using different DHT conditions (continuous-CDHT and cyclic-RDHT), with durations ranging from 3 to 15 h and 1 to 5 cycles, at 120 °C. The study investigated and compared the structural, thermal, pasting, and morphological properties of the treated samples to those of untreated potato starch, including in vitro digestibility post-modification. DHT altered the amylose content of the biopolymer. X-ray diffraction patterns transitioned from type B to type C, and a decrease in relative crystallinity (RC%) was observed. Morphological changes were more pronounced in starches modified by RDHT. Paste viscosities of both CDHT and RDHT-treated starches decreased significantly, by 61.7 % and 58.1 % respectively, compared to native starch. The gelatinization enthalpy of RDHT-treated starches reduced notably, from 17.60 to 16.10 J g-1. Additionally, starch digestibility was impacted, with cyclic treatments yielding a significant increase in resistant starch content, notably an 18.26 % rise. These findings underscore the efficacy of dry heat in enhancing the functional properties of potato starch.

Structure and functional characteristics of starch from different hulled oats cultivated in China.

This work aimed to evaluate the structure and functional characteristics of starch from ten hulled oat cultivars grown in different locations in China. The protein, phosphorus, amylose, and starch contents were 0.2-0.4 %, 475.7-691.8 ppm, 16.2-23.0 %, and 93.6-96.7 %, respectively. All the starches showed irregular polygonal shapes and A-type crystallization with molecular weights ranging from 7.2 × 107 to 4.5 × 108 g/mol. The amounts of amylopectin A (DP 6-12), B1 (DP 13-24), B2 (DP 25-36), and B3 (DP > 36) chains were in the ranges of 10.3-16.0 %, 54.5-64.8 %, 16.5-21.1 %, and 4.9-13.1 %, respectively. The starches differed significantly in gelatinization temperatures, pasting viscosity, solubility, swelling power, rheological properties, and digestion parameters. The results revealed that the larger particle size could increase the peak viscosity of the starch paste. The presence of phosphorus increased the gelatinization temperature and enhanced the resistant starch content. The starch granules with higher crystallinity contained a higher proportion of phosphate, which increased final viscosity and setback viscosity but decreased rapidly digestible starch. Overall, oat starch with a high phosphorus content could be used to prepare low-glycemic-index food for diabetes patients.

Application of chiral stationary phases for the separation of vitamin A acetate isomers.

The separation of vitamin A acetate isomers is essential for quality assurance of e.g. nutrition supplements, cosmetics, and pharmaceutical ingredients. High performance liquid chromatography (HPLC) is currently the most suitable analytical method for tackling this challenging separation task. However, the existing methods based on normal phase chromatography (NPC) are poorly reproducible due to the typical disadvantages of NPC, such as long equilibration times and fluctuation in retention factors. A new reversed phase method developed in our labs allows the separation of the isomers applying a chiral stationary phase (CSP). This phase consists of an immobilized polysaccharide which can be used in every chromatographic mode. However, they are not typically used in reversed phase mode. Through the screening of various stationary phases with different polysaccharide based chiral selectors, the choice of the ideal stationary phase could be confirmed, allowing to draw conclusions about the retention mechanism. The CSP Chiralpak IG-3 was found to be the most suitable among the examined. Regarding the separation mechanism, the spatial helical structure of the polysaccharide derivatives was confirmed to be of particular significance. In addition to the stationary phase, the mobile phase was tested for optimization regarding composition, gradient parameters as well as temperature using chromatographic method optimization software for the sake of method robustness.

The multi-scale structure changes of γ-ray irradiated potato starch to mitigate pasting/digestion properties.

The comprehensive understanding of multi-scale structure of starch and how the structure regulates the pasting/digestion properties remain unclear. This work investigated the effects of γ-ray irradiation with different doses on multi-scale structure and pasting/digestion properties of potato starch. Results indicated that γ-ray at lower doses (<20 kGy) had little effect on micromorphology of starch, increased mainly the amylose content and the thickness of amorphous region while decreased crystallinity, double helix content and lamellar ordering. With the increase of dose, the internal structure of large granules was destroyed, resulting in the depolymerization of starch to form more short-chains and to reduce molecular weight. Meanwhile, amylose content decreased due to the depolymerization of amylose. The enhanced double helix content, crystallinity, lamellar ordering and structural compactness manifested the formation of the thicker and denser starch structure. These structure changes resulted in the decreased viscosity, the increased stability and anti- digestibility of paste.

Structural analysis of potato starch transformation during high-energy ball-milling: Oxygen and humidity content effects.

High Energy Ball-Milling (HEBM) modifies starchs' granule morphology, physicochemical properties, and chemical structure. However, understanding how the HEBM changes the starch chemical structure is necessary to control these modifications. Therefore, this study aimed to investigate the changes in potato starch's long- and short-range molecular order during HEBM at different environmental conditions such as oxygen (Air) and humidity content. Due to the correlation between the starch modification and the energy supplied (Esupp) by the HEBM, Burgio's equation was used to calculate this energy. The starch transformation was followed by X-ray diffraction, Fourier Transform-Infrared Spectroscopy, and Raman spectroscopy. A Principal Component Analysis (PCA) was conducted to reduce the HEBM variables. PAC analysis demonstrated that the different oxygen-humidity conditions do not affect the HEBM of potato starch. Based on the starch chemical structure transformation correlated with Esupp during HEBM, four stages were observed: orientation, modification, mechanolysis, and over-destruction. It was identified for the first time that at low milling energy (<1.5 kJ/g, orientation stage), the glycosidic rings change their orientation, and starch-water interaction increases while the starch's organization reduces. Ergo, the potato starch could be more susceptible to chemical modifications during the first two stages.

Natural fermentation of potato (Solanum tuberosum L.) starch: Effect of cultivar, amylose content, and drying method on expansion, chemical and morphological properties.

Natural fermentation with sun-drying is a modification that promotes the expansion capacity of starch, and its effects on potato starch have not been reported so far. The aim of this study was to evaluate the effects of the amylose content of potato (Solanum tuberosum L.) starches and natural fermentation followed by oven or sun drying on its properties. Cassava starch was also used a control. Native and fermented starches were evaluated based on their chemical composition, amylose, carboxyl and carbonyl content as well as their thermal, pasty, and morphological properties. The fermentation water was evaluated by pH and titratable acidity to control the process. Puffed balls were prepared to evaluate expandability, mass loss, porosity and texture. The fermentation intensity was greater for potato and cassava starch with low-amylose content than for potato starch with higher amylose content. In addition, the acidity of the fermentation water increased faster with cassava starch than with potato starches. The fermented potato starches with the highest amylose content had low acidity and low expansion capacity compared to the fermented potato and cassava starches with low-amylose content. Fermentation and sun-drying of low-amylose potato and cassava starches increased the expansion and reduced the hardness of the puffed balls.

Fine molecular structure and digestibility changes of potato starch irradiated with electron beam and X-ray.

The change of digestibility of starch irradiated with different types from the perspective of fine structure is not well understood. In this work, the change of internal structure, molecular weight and chain-length distribution, helical structure, lamellar structure, fractal structure and digestibility of native and treated potato starch with electron beam and X-ray was analyzed. Two irradiations caused the destruction of internal structure, the disappearance of growth rings and increase of pores. Irradiation degraded starch to produce short chains and to decrease molecular weight. Irradiation increased double helical content and the thickness and peak area of lamellar structure, resulting in the reorganization of amylopectin and increase of structure order degree. The protected glycosidic linkages increased starch resistance to hydrolase attack, thereby enhancing the anti-digestibility of irradiated starch. Pearson correlation matrix also verified the above-mentioned results. Moreover, X-ray more increased the anti-digestibility of starch by enhancing ability to change fine structure.

Mechanistic insights into the enhanced texture of potato noodles by incorporation of small granule starches.

Potato noodles are a popular food due to their unique texture and taste, but native potato starch often fails to meet consumer demands for precise textural outcomes. The effect of blending small granule (waxy amaranth, non-waxy oat and quinoa) starch with potato starch on the properties of noodles was investigated to enhance quality of noodles. Morphological results demonstrated that small granule starch filled gaps between potato starch granules, some of which gelatinized incompletely. Meanwhile, XRD and FTIR analysis indicated that more ordered structures and hydrogen bonding among starch granules increased with addition of small granule starch. The addition of oat or quinoa starch increased gel elasticity, decreased viscosity of the pastes, and increased the tensile strength of noodles, while addition of 30 % and 45 % waxy amaranth starch did not increase G' value of gel or tensile strength of noodles. These results indicated that amylose molecules played an important role during retrogradation, and may intertwine and interact with each other to enhance the network structure of starch gel in potato starch blended with oat or quinoa starch. This study provides a natural way to modify potato starch for desirable textural properties of noodle product.

Fabrication and release property of self-assembled garlic essential oil-amylose inclusion complex by pre-gelatinization coupling with high-speed shear.

Our aim was to investigate the preparation of self-assembled garlic essential oil-amylose inclusion complexes (SGAs) using garlic essential oil (GEO) and corn starch (CS), and evaluated their release properties. SGAs were fabricated by pre-gelatinization coupling with high-speed shear at different GEO-CS mass ratios. When the mass ratio of GEO to pre-gelatinized corn starch was set at 15 % (SGA-15 %), with a fixed shear rate of 9000 rpm and a shear time of 30 min, the allicin content was 0.573 ± 0.023 mg/g. X-ray diffraction (XRD) results revealed a starch V-type crystalline structure in SGAs with peaks at 13.0°, 18.0°, and 20.0° (2θ). Fourier Transform Infrared (FTIR) spectra of SGAs displayed a shift in the characteristic peak of diallyl trisulfide from 987.51 cm-1 to 991.45 cm-1. Scanning electron microscope (SEM) images revealed that SGAs exhibited lamellar structures covered with small granules. SGAs exhibited higher residual mass (approximately 12 %) than other samples. The resistant starch content of SGAs increased from 10.1 % to 18.4 % as GEO contents varied from 5 % to 15 %. In vitro digestion tests showed that about 53.21 % of allicin remained in SGA-15 % after 8 h. Therefore, this dual treatment can be a new method for fabricating controlled-release inclusion complexes of guest molecules.

Physicochemical properties of different size fractions of potato starch cultivated in Highland China.

Location influences the properties of potato starch. Potato starch granules cultivated in highland of China were separated into three fractions according to the sedimentation time: large- (∼81 µm, large fraction potato starch, LFPS), medium- (∼28 µm, medium fraction potato starch, MFPS), and small-size (∼15 µm, small fraction potato starch, SFPS) fractions. SFPS showed a spherical shape, MFPS showed an ellipsoid shape and LFPS showed an elongated shape. The three fractions showed the similar XRD patterns, while the relative crystallinity decreased with the decrease of granule size (LFPS 23.61%, MFPS 20.74% and SFPS 20.48%). The water solubility was positively corelated with the granule size, while the swelling power showed a negative relationship with the granule size. For the rheological properties, all the three fractions showed a shear-shinning behavior; and SFPS had the highest peak temperature. However, the MFPS showed the lowest storage modulus during the temperature sweep. The granule size didn't influence the nutritional properties of potato starch and LFPS had the highest slowly digestible starch (SDS) (83.77%) and resistant starch (RS) (13.66%) contents. Some of the properties are different from the previous studies.

Exploring the formation mechanism of resistant starch (RS3) prepared from high amylose maize starch by hydrothermal-alkali combined with ultrasonic treatment.

In this study, type III resistant starch (RS3) was prepared from high amylose maize starch (HAMS) using hydrothermal (RS-H), hydrothermal combined ultrasonication (RS-HU), hydrothermal-alkali (RS-HA), and hydrothermal-alkali combined ultrasonication (RS-HAU). The role of the preparation methods and the mechanism of RS3 formation were analyzed by studying the multiscale structure and digestibility of the starch. The SEM, NMR, and GPC results showed that hydrothermal-alkali combined with ultrasonication could destroy the granule structure and α-1,6 glycosidic bond of HAMS and reduce the molecular weight of HAMS from 195.306 kDa to 157.115 kDa. The other methods had a weaker degree of effect on the structure of HAMS, especially hydrothermal and hydrothermal combined ultrasonication. The multiscale structural results showed that the relative crystallinity, short-range orderliness, and thermal stability of RS-HAU were significantly higher compared with native HAMS. In terms of digestion, RS-HAU had the highest RS content of 69.40 %. In summary, HAMS can generate many short-chain amylose due to structural damage, which rearrange to form digestion-resistant crystals. With correlation analysis, we revealed the relationship between the multiscale structure and the RS content, which can be used to guide the preparation of RS3.

Effect of Ecotype and Starch Isolation Methods on the Physicochemical, Functional, and Structural Properties of Ethiopian Potato (Plectranthus edulis) Starch.

The Ethiopian potato (Plectranthus edulis) is an annual tuber crop indigenous to Ethiopia. The crop is underutilized and not much studied despite its high yield of starch, which has a good potential to contribute to the effort in meeting the quickly growing demand for starch. In this study, the effects of the ecotype and isolation methods on the physicochemical, functional, structural, and crystalline properties of starches were evaluated. Starches were isolated from two Ethiopian potato ecotypes (Loffo and Chanqua) using distilled water (DW), 0.01% sodium metabisulphite (SMS), and 1M sodium chloride (NaCl) in the isolation media. The results showed that the lowest starch yield was obtained from Chanqua using DW (97.4%), while the maximum was from Loffo using SMS (99.3%). The L* (lightness) and whiteness values of the starches obtained from Loffo were higher than those of Chanqua starches, with NaCl and SMS extractants yielding the highest values. The bulk density, water activity (aw), pH, proximate composition (moisture content, protein, ash, fat, crude fiber, and carbohydrate contents), and techno-functional properties were established. The majority of these parameters varied depending on both the isolation method and the ecotype. The crystallinity pattern of all starches showed B-type diffraction, with differences in diffraction peak intensities between all starches. FTIR tests showed structural changes as a function of the ecotype and isolation procedure used. The Loffo ecotype exhibited considerably better results, and the SMS isolation method was found to be the most effective way to acquire the highest starch quality in most of the characteristics evaluated.

Granular architecture of lotus seed starch and its impact on physicochemical properties.

Lotus seed starch has high apparent amylose content (AAM). A representative definition of its granular architecture (e.g., lamellar structure) remained absent. This study defined the granular shape, crystalline and lamellar structures, and digestibility of twenty-two samples of lotus seed starch (LS) by comparing with those of potato and maize starches. LS granules had more elongated shape and longer repeat distance of lamellae than potato and maize starch granules. The enzymatic susceptibility of LS granules was more affected by AAM than granular architecture. Using these LSs as a model system, the relationships between lamellar structure of starch granules and properties of their gelatinized counterparts were investigated. In LSs, thinner amorphous lamella and thicker crystalline lamella were associated with higher swelling power and yield stress. The relationships were found to be connected via certain structural characteristics of amylopectin.

Effects of different content of EGCG or caffeic acid addition on the structure, cooking, antioxidant characteristics and in vitro starch digestibility of extruded buckwheat noodles.

The effects of different types and content of polyphenol addition on the structure, cooking, antioxidant characteristics and in vitro starch digestibility of extruded buckwheat noodles were investigated in this study. The result showed epigallocatechin-3-gallate (EGCG) was more easily combined with starch to form complex than caffeic acid, and amylose tended to be combined with polyphenols to form more complex. Amylose had a protective effect on polyphenols during extrusion process, which led to a significant increase of polyphenol content and antioxidant activity of extruded noodles. The addition of polyphenol and high amylose corn starch (HACS) improved the cooking quality of extruded buckwheat noodles. The extruded buckwheat noodles with 20 % HACS and 1 % EGCG had the lowest cooking loss of 6.08 %. The addition of EGCG and HACS increased the content of resistant starch and reduced predicted glycemic index (pGI). The noodles with 20 % HACS and 3 % EGCG had the lowest pGI (63.38) and the highest resistant starch (RS) content (61.60 %). This study provides a theoretical basis for the development of low pGI extruded buckwheat noodles.

Multi-scale structural characteristics of black Tartary buckwheat resistant starch by autoclaving combined with debranching modification.

The impact of autoclaving or autoclave-debranching treatments on the multi-scale structure of resistant starch (RS) and the relationship with starch digestion remains unclear, despite their widespread use in its preparation. This work investigated the relationship between RS structure in black Tartary buckwheat and its digestibility by analyzing the effects of autoclaving and autoclave-debranching combined treatments on the multi-scale structure of RS. The results showed that black Tartary buckwheat RS exhibited a more extensive honeycomb-like network structure and enhanced thermal stability than either black Tartary buckwheat native starch (BTBNS) or common buckwheat native starch (CBNS). Autoclaving and autoclaving-debranching converted A-type native starch to V-type and possibly the formation of flavonoid-starch complexes. Autoclaving treatment significantly increased the proportion of short A chain (DP 6-12) and the amylose (AM) content, reduced the viscosity and the total crystallinity. Notably, the autoclave-debranching co-treatment significantly enhanced the resistance of starch to digestion, promoted the formation of perfect microcrystallines, and increased the AM content, short-range ordered degree, and the proportion of long B2 chain (DP 25-36). This study reveals the relationship between the multi-scale structure and digestibility of black Tartary buckwheat RS by autoclaving combined with debranching modification.

Effects of biochar coupled with chemical and organic fertilizer application on physicochemical properties and in vitro digestibility of common buckwheat (Fagopyrum esculentum Moench) starch.

Common buckwheat starch, a functional ingredient, has wide food and non-food applications. Excessive chemical fertilizer application during grain cultivation decreases quality. This study examined the effects of different combinations of chemical fertilizer, organic fertilizer, and biochar treatment on the physicochemical properties and in vitro digestibility of starch. The amendment of both organic fertilizer and biochar was observed to have a greater impact on the physicochemical properties and in vitro digestibility of common buckwheat starch in comparison to organic fertilizer amendment solely. The combined application of biochar, chemical, and organic nitrogen in an 80:10:10 ratio significantly increased the amylose content, light transmittance, solubility, resistant starch content, and swelling power of the starch. Simultaneously, the application reduced the proportion of amylopectin short chains. Additionally, this combination decreased the size of starch granules, weight-average molecular weight, polydispersity index, relative crystallinity, pasting temperature, and gelatinization enthalpy of the starch compared to the utilization of chemical fertilizer alone. The correlation between physicochemical properties and in vitro digestibility was analyzed. Four principal components were obtained, which accounted for 81.18 % of the total variance. These findings indicated that the combined application of chemical fertilizer, organic fertilizer, and biochar would improve common buckwheat grain quality.

Loquat seed starch - Emerging source of non-conventional starch: Structure, properties, and novel applications.

Recently, non-conventional sources of starch have attracted attention due to their potential to provide cost-effective alternatives to traditional starch. Among non-conventional starches, loquat (Eriobotrya japonica) seed starch is an emerging source of starch consisting of the amount of starch (nearly 20 %). It could be utilized as a potential ingredient due to its unique structure, functional properties, and novel applications. Interestingly, this starch has similar properties as commercial starches including high amylose content, small granule size, and high viscosity and heat stability, making it an attractive option for various food applications. Therefore, this review mainly covers the fundamental understanding of the valorization of loquat seeds by extracting the starch using different isolation methods, with preferable structural, morphological, and functional properties. Different isolation and modification methods (wet milling, acid, neutral and alkaline) are effectively used to obtain higher amounts of starch are revealed. Moreover, insight into various analytical techniques including scanning electron microscopy, differential scanning calorimetry, and X-ray diffraction used to characterize the molecular structure of the starch are discussed. In addition, the effect of shear rate and temperature on rheological attributes with solubility index, swelling power, and color is revealed. Besides, this starch contains bioactive compounds that have shown a positive impact on the enhancement of the shelf-life of the fruits. Overall, loquat seed starches have the potential to provide sustainable and cost-effective alternatives to traditional starch sources and can lead to novel applications in the food industry. Further research is needed to optimize processing techniques and develop value-added products that can be produced at a large scale. However, there is relatively limited published scientific evidence on the structural and morphological characteristics of loquat seed starch. Thus, in this review, we focused on different isolation techniques of loquat seed starch, its structural and functional characteristics, along with potential applications.

Effect of various pretreatments of potato on the cooking and texture properties of the developed potato-rice noodle.

In order to ascertain optimal potato pretreatment strategy for potato-rice noodle processing, the effect of partial substitution of rice flour with potatoes processed by various pretreatment on rice noodle quality was determined. In this study, raw potato flour (RPF), cooked potato flour (CPF), potato pulp (PP), mashed potato (MP), and rice flour (RF) were prepared. The physicochemical and pasting properties of RF sample, RPF + RF, PP + RF, CPF + RF, and MP + RF blends were investigated relative to their noodle quality. The results indicated that compared to RF, CPF + RF, and MP + RF blends, RPF + RF and PP + RF blends exhibited a lower degree of starch damage, solubility, and breakdown viscosity, as well as higher relative crystallinity, final, and setback viscosity, which are favorable to quality of noodles. Therefore, the noodles made from RPF + RF and PP + RF showed the most desirable cooking quality and texture. In summary, high damaged starch content and excessive amylose content were detrimental to noodle making. Consequently, our research revealed that RPF/pulp (ungelatinized potato materials) blended with rice flour can be employed to produce decent potato-rice noodles. PRACTICAL APPLICATION: Cooked potato flour is main processing method of commercial potato flour and widely used in potato staple food industry. However, the results of our study show that raw potato flour and potato pulp are more suitable for processing of potato-rice noodle than cooked potato flour and mashed potato and can significantly improve the quality of rice noodle. This provides new ideas and insights for the preprocessing of raw potato in the potato staple food industry and the quality improvement of rice noodle. HIGHLIGHTS: The physicochemical properties of potatoes changed with various pretreatments. Excessive amylose content and starch damage were detrimental to noodle making. Partial substitution of rice flour with raw potato flour/pulp improved rice noodle quality. Raw and ungelatinized potato material is preferable for potato-rice noodle making.