Machine Learning-Assisted Portable Microplasma Optical Emission Spectrometer for Food Safety Monitoring.

To meet the needs of food safety for simple, rapid, and low-cost analytical methods, a portable device based on a point discharge microplasma optical emission spectrometer (µPD-OES) was combined with machine learning to enable on-site food freshness evaluation and detection of adulteration. The device was integrated with two modular injection units (i.e., headspace solid-phase microextraction and headspace purge) for the examination of various samples. Aromas from meat and coffee were first introduced to the portable device. The aroma molecules were excited to specific atomic and molecular fragments at excited states by room temperature and atmospheric pressure microplasma due to their different atoms and molecular structures. Subsequently, different aromatic molecules obtained their own specific molecular and atomic emission spectra. With the help of machine learning, the portable device was successfully applied to the assessment of meat freshness with accuracies of 96.0, 98.7, and 94.7% for beef, pork, and chicken meat, respectively, through optical emission patterns of the aroma at different storage times. Furthermore, the developed procedures can identify beef samples containing different amounts of duck meat with an accuracy of 99.5% and classify two coffee species without errors, demonstrating the great potential of their application in the discrimination of food adulteration. The combination of machine learning and µPD-OES provides a simple, portable, and cost-effective strategy for food aroma analysis, potentially addressing field monitoring of food safety.

Advanced detection tools in food fraud: A systematic review for holistic and rational detection method based on research and patents.

Modern food chain supply management necessitates the dire need for mitigating food fraud and adulterations. This holistic review addresses different advanced detection technologies coupled with chemometrics to identify various types of adulterated foods. The data on research, patent and systematic review analyses (2018-2023) revealed both destructive and non-destructive methods to demarcate a rational approach for food fraud detection in various countries. These intricate hygiene standards and AI-based technology are also summarized for further prospective research. Chemometrics or AI-based techniques for extensive food fraud detection are demanded. A systematic assessment reveals that various methods to detect food fraud involving multiple substances need to be simple, expeditious, precise, cost-effective, eco-friendly and non-intrusive. The scrutiny resulted in 39 relevant experimental data sets answering key questions. However, additional research is necessitated for an affirmative conclusion in food fraud detection system with modern AI and machine learning approaches.

Determination of copper in rose tea samples using flame atomic absorption spectrometry after emulsification liquid-liquid microextraction.

Rose tea infusion has gained popularity worldwide due to its health benefits. However, it is known that tea plants can be contaminated with heavy metals including copper. Hence, an accurate and applicable analytical method namely emulsification liquid-liquid microextraction based deep eutectic solvent - flame atomic absorption spectrometry (ELLME-DES-FAAS) was proposed to determine copper at trace levels in rose tea samples. Under the optimum experimental conditions, analytical figures of merit for the developed method were examined, and dynamic range, limit of detection (LOD) and limit of quantification (LOQ) were found to be 5.07-246.61 µg/kg (mass-based) with 0.9992 coefficient of determination, 2.50 µg/kg and 8.32 µg/kg, respectively. A matrix matching calibration strategy was employed to boost recovery results, and the acceptable recovery results were recorded between 95.9 % and 118.4 %. According to recovery results, the developed analytical method can be safely employed to determine the concentration of copper in rose tea samples accurately.

A systematic review and meta-analysis of validated analytical techniques for the determination of total selenium in foods and beverages.

The intricate balance between the beneficial and harmful effects of selenium (Se) intake means that its quantification in food needs to be done correctly. Therefore, in this review, we systematized 105 articles to identify the most studied methodologies, analytical techniques, and food matrices. Among the analytical techniques employed, inductively coupled plasma mass spectrometry (ICP-MS) (n = 29) emerged as the most commonly used method. The most prevalent hydrolysis methodology to digest Se in food matrices involved the use of nitric acid combined with ultrasound, which improved both the yield and digestion time. Optimal recovery values were achieved when total Se quantification accounted for the sum of Se(IV) and Se(VI) (94.4-99.4%) and for SeCys (88-96.5%). These findings are relevant for advancing methodological approaches, and their results emphasize the importance of developing alternative, faster, and lower-cost protocols for Se quantification in foods and beverages.

Colour and pigment in raw ground meat incorporated crushed garlic during the refrigerated storage: Their relationship to lipolytic and volatilomic changes.

The effects of freshly crushed garlic incorporated in raw ground meat at different rates 0 % to 2 % on colour, pigment forms, TBARS, peroxide, free fatty acids and volatilomic were investigated during 96 h storage at 4 °C. With advancing storage time and increasing garlic rate from 0 % to 2 %, the redness (a*), colour stability, oxymyoglobin and deoxymyoglobin decreased, but metmyoglobin, TBARS, peroxide, free fatty acids (C6, C15-C17), and aldehydes and alcohols, especially hexanal, hexanol, benzaldehyde, increased. Principal component analysis based on pigment, colour, lipolytic and volatilomic changes classified successfully the meat samples. Metmyoglobin was positively correlated with lipid oxidation products (TBARS, hexanal), but the other pigment forms and colour parameters (a* and b* values) were negatively correlated. Increased metmyoglobin proportion and decreased redness and colour stability may be used as reliable indicators of lipid oxidation. Also, the incorporation of fresh garlic into ground meat was not promising to increase oxidative stability.

Bioaccessibility of phenolic compounds using the standardized INFOGEST protocol: A narrative review.

The INFOGEST protocol creation was a watershed for phenolic bioaccessibility studies. Because of this important initiative to standardize bioaccessibility studies, data comparisons between different laboratories are now expedited. It has been eight years since the INFOGEST protocol creation, and three from the latest update. However, the current status in terms of phenolic bioaccessibility and how far different laboratories are from reaching a consensus are still unrevealed. In this sense, this narrative review considered an evaluation of different studies that applied the INFOGEST protocol to investigate the bioaccessibility of phenolic compounds. The central objective was to compile the main findings and consensus and to identify possible gaps and future opportunities. This approach intends to further facilitate the use of this protocol by professionals in the field of food science and technology and related areas, generating a reflection on the actual level of standardization of the method. Despite the differences in phenolic compounds from diverse food matrices, and their peculiar behavior, some trends could be elucidated, in terms of phenolic release, stability, and/or transformation upon in vivo digestion. In contrast, there was no general consensus regarding sample preparation, how to report results and the form to calculate bioaccessibility, making it difficult to compare different studies. There is still a long road to effectively standardize the results obtained for phenolic bioaccessibility using the INFOGEST protocol, which is also an opportunity in terms of food analysis that can impact the food industry, especially for the development of nutraceuticals and functional foods.

Маркировка и химический состав пищевых продуктов в Российской Федерации. Сводный отчет о результатах исследования

В настоящем сводном отчете представлены результаты перекрестного одномоментного исследования,проведенного в Москве, Российская Федерация, в период с июля 2019 г. по декабрь 2020 г. Цель исследованиязаключалась в том, чтобы составить представление о продовольственной среде города, в частности о пищевойпродукции, продаваемой в розничных продуктовых магазинах и ресторанах быстрого питания, и маркировкеее пищевой ценности, а также о химическом составе наиболее широко распространенных расфасованныхпищевых продуктов, готовых блюд и фастфуда.

Water-soluble dual lysosome/mitochondria-targeted fluorescent probe for detection of SO2 in water, food, herb, and live cells.

In this paper, we present a new donor-π bridge-acceptor type fluorescent probe, MIB, which bears two organelle-targeted groups, namely positively charged benzothiazole group for mitochondria and morpholine moiety for lysosomes. In aqueous solution, the nucleophilic addition of HSO3- (as SO2 donor) to MIB blocked its long-range π-conjugation and ICT process and resulted in significant optical signal changes (blue-shifted UV absorbance and fluorescence), which enabled colorimetric and ratiometric fluorescent detection of HSO3- with high selectivity and sensitivity (detection limit of 63.15 nM). MIB offers obvious advantages of good water-solubility, fast response time (within 1 min), unique dual lysosome/mitochondria targeting capability and has been applied to the sensing of endogenous and exogenous SO2 in live cells through fluorescent imaging. In addition, the proposed probe has been utilized for the determination of bisulfite in real water, food and herbal medicine samples, showing good recovery (91.45 % - 109.3 %) and precision.

Reliable Quantification of Ultratrace Selenium in Food, Beverages, and Water Samples by Cloud Point Extraction and Spectrometric Analysis.

Selenium is a trace element essential for the proper functioning of human body. Since it can only be obtained through our diet, knowing its concentrations in different food products is of particular importance. The measurement of selenium content in complex food matrices has traditionally been a challenge due to the very low concentrations involved. Some of the difficulties may arise from the abundance of various compounds, which are additionally present in examined material at different concentration levels. The solution to this problem is the efficient separation/preconcentration of selenium from the analyzed matrix, followed by its reliable quantification. This review offers an insight into cloud point extraction, a separation technique that is often used in conjunction with spectrometric analysis. The method allows for collecting information on selenium levels in waters of different complexity (drinking water, river and lake waters), beverages (wine, juices), and a broad range of food (cereals, legumes, fresh fruits and vegetables, tea, mushrooms, nuts, etc.).

Physicochemical properties, nutrient profile, microbial stability, and sensory evaluation of cupcakes enriched with pomegranate seed oil.

Excessive use of refined flour, solid fats, and sugar in preparing baked products are considered to be unhealthy and is intricately linked with the development of lifestyle diseases. Replacing refined flour with whole wheat flour and solid fats with cold-pressed oil serves as an alternate option. The study was aimed at evaluating the physicochemical properties, nutrient composition, sensory attributes, and shelf life of cupcakes enriched using pomegranate seed oil (PSO). Vanilla and chocolate cupcake variants were prepared using 25 and 50% of PSO. A sensory panel consisting of 30 semi-trained participants was selected for evaluating the formulated products using a five-point hedonic scale. Nutrient content was estimated using standard techniques. The stability of the formulated product was determined by evaluating the physicochemical traits and microbial growth on the 0th, 4th, and 7th day. Mean scores of the sensorial analysis showed that the incorporation of PSO in cupcakes was highly accepted by the panel members. Chocolate cupcake containing 50% of PSO was found to be the most preferred product (3.53±0.94), followed by vanilla cupcake containing 25% of PSO (3.4±0.62). The moisture, protein, and fat content of chocolate cupcakes containing 25% of PSO were high. Cupcakes prepared with PSO can be stored for four days at room temperature. GC-MS analysis showed the presence of punicic acid, oleic acid, tocopherols, campesterol, sitosterols, stigmasterol, and α-tocopheryl acetate as pre-dominant fatty acid in unheated and heated PSO. In conclusion, cupcakes prepared using PSO showed acceptable physicochemical qualities and sensory properties which indicated its successful consumption by people affected with metabolic disorders.

Seed Treatment with Illite Enhanced Yield and Nutritional Value of Soybean Sprouts.

Soybean sprouts, a nutritional food product, can contribute to food security because they can be grown within a week and do not require sophisticated technology. The yield and quality of soybean sprouts are influenced by various factors, including seed priming and growing conditions. The objective of this study was to investigate the effects of seed soaking in different concentrations of illite, a clay mineral, on the yield and quality of soybean sprouts. Soybean seeds soaked in five concentrations (0.5%, 1%, 3%, 5%, and 10%, w/v) of illite or tap water for 8 h were named IP-0.5, IP-1, IP3, IP-5, IP-10, and control, respectively. The highest sprout yield was found in IP-3, followed by IP-1, and IP-5, which had 11.1%, 8.8%, and 7.4% increments, respectively, compared to the control. The content of vitamin C, mineral element, isoflavone, total polyphenol, and total flavonoid was higher in many of the illite-treated soybean sprouts than in the control. The overall results indicated that pre-soaking soybean seeds in lower concentrations (0.5-3%, w/v) of illite could be helpful to enhance the yield and nutritional value of soybean sprouts in an easy and inexpensive way.

Screening of Acrylamide of Par-Fried Frozen French Fries Using Portable FT-IR Spectroscopy.

Current assays for acrylamide screening rely heavily on LC-MS/MS or GC-MS, techniques that are not suitable to support point of manufacturing verification because it can take several weeks to receive results from a laboratory. A portable sensor that can detect acrylamide levels in real-time would enable in-house testing to safeguard both the safety of the consumer and the economic security of the agricultural supplier. Our objective was to develop a rapid, accurate, and real-time screening technique to detect the acrylamide content in par-fried frozen French fries based on a portable infrared device. Par-fried French fries (n = 70) were manufactured at times ranging from 1 to 5.5 min at 180 °C to yield a wide range of acrylamide levels. Spectra of samples were collected using a portable FT-IR device operating from 4000 to 700 cm-1. Acrylamide was extracted using QuEChERS and quantified using uHPLC-MS/MS. Predictive algorithms were generated using partial least squares regression (PLSR). Acrylamide levels in French fries ranged from 52.0 to 812.8 µg/kg. The best performance of the prediction algorithms required transformation of the acrylamide levels using a logarithm function with models giving a coefficient of correlation (Rcv) of 0.93 and RPD as 3.8, which means the mid-IR model can be used for process control applications. Our data corroborate the potential of portable infrared devices for acrylamide screening of high-risk foods.

Multi-Year Study of the Chemical and Sensory Effects of Microwave-Assisted Extraction of Musts and Stems in Cabernet Sauvignon, Merlot and Syrah Wines from the Central Coast of California.

Microwave technology (MW) was applied to musts and stems over three consecutive vintages in Cabernet Sauvignon, Merlot and Syrah wines from California (USA). Stems were added to musts at a rate of 50 and 100% (50% Stems and 100% Stems), either as untreated or after MW (50% MW Stems and 100% MW Stems). Stem additions lowered ethanol (up to 1.15% v/v reduction), but increased pH (up to 0.16 units) and the tannin content of the wines. In 2016, tannins increased by 103% (100% Stems), and 124% (100% MW Stems). In 2017, tannins increased by 39% in stem-added Merlot wines and by 63% (100% Stems) and 85% (100% MW Stems) in Syrah wines. In 2018, tannins in Syrah wines increased by 250% (100% MW Stems) and by 743% (100% Stems). Wines made with 50% Stems exhibited intermediate tannin contents. Must MW increased flavonols (up to 278% in Syrah wines), monoglucosylated, acylated and anthocyanin-derived pigments. Stem additions reduced wine color and polymeric pigment formation in Syrah. Must MW decreased the perception of coarseness and herbaceous flavors in Merlot, whereas stem additions increased herbaceous aromas in Syrah. Despite higher tannin contents in stem-added wines, no concomitant increases in astringency were observed.

Residue distribution and risk assessment of bifenazate and its metabolite in garlic plant.

The dissipation, conversion and risk assessment of bifenazate and bifenazate-diazene in garlic plant were studied by a modified QuEChERS method coupled with UHPLC-MS/MS for the first time. Bifenazate dissipated rapidly in garlic chive and serpent garlic with the half-lives of 3.0-3.9 days and 6.1-6.9 days, respectively. Bifenazate residue on garlic (<0.01 mg/kg) was significantly lower than the other two matrices in the whole growing period, which meant residues in the above-ground part were not transferred to the garlic. Furthermore, garlic chive had higher residues than serpent garlic due to the differences in morphological characteristics. Bifenazate-diazene was easier to convert to bifenazate, with the conversion rates of 93%, 16% and 32% in garlic, serpent garlic and garlic chive extracts, respectively. Additionally, the dietary intake risk for bifenazate was acceptable with RQchronic < 100% according to the international and national assessments.

Foodborne Toxigenic Agents Investigated in Central Italy: An Overview of a Three-Year Experience (2018-2020).

Foodborne diseases (FBDs) represent a worldwide public health issue, given their spreadability and the difficulty of tracing the sources of contamination. This report summarises the incidence of foodborne pathogens and toxins found in food, environmental and clinical samples collected in relation to diagnosed or suspected FBD cases and submitted between 2018 and 2020 to the Food Microbiology Unit of the Istituto Zooprofilattico Sperimentale del Lazio e della Toscana (IZSLT). Data collected from 70 FBD investigations were analysed: 24.3% of them started with an FBD diagnosis, whereas a further 41.4% involved clinical diagnoses based on general symptomatology. In total, 5.6% of the 340 food samples analysed were positive for the presence of a bacterial pathogen, its toxins or both. Among the positive samples, more than half involved meat-derived products. Our data reveal the probable impact of the COVID-19 pandemic on the number of FBD investigations conducted. In spite of the serious impact of FBDs on human health and the economy, the investigation of many foodborne outbreaks fails to identify the source of infection. This indicates a need for the competent authorities to continue to develop and implement a more fully integrated health network.

Metal oxide-based macroporous ordered double affinity molecularly imprinted polymer for specific separation and enrichment of glycoprotein from food samples: a co-modification of DMSA and boronate affinity.

Metal oxide-based macroporous ordered double affinity molecularly imprinted polymers (D-MIPs) were developed as solid phase extraction (SPE) adsorbents for the specific identification of ovalbumin (OVA) under physiological pH conditions prior to ultraviolet visible (UV-vis) spectrophotometric detection. Herein, macroporous alumina (MA) was used as a matrix; dimercaptosuccinic acid (DMSA) and 3-aminophenylboric acid (APBA) were employed as dual-functional monomers; APBA is a self-polymerizing monomer. The effects of synthesis conditions, SPE conditions as well as selectivity, reproducibility, and reusability were studied. The co-modification of DMSA and boronate affinity renders the adsorbent exhibiting a high adsorption capacity (114.4 mg g-1) and short equilibrium time (30 min). The surface imprinting technology causes the adsorbent to have high selectivity towards OVA. The OVA recovery range is 91.1-99.6%. This study provides a promising method for the enrichment of OVA and other cis-diol-containing analytes in complex biological samples. A novel metal oxide-based macroporous ordered nanoparticle with a combination of DMSA and boronate affinity was successfully prepared for specific separation and enrichment of glycoprotein from complex biological samples.

Co-Ingestion of Natal Plums (Carissa macrocarpa) and Marula Nuts (Sclerocarya birrea) in a Snack Bar and Its Effect on Phenolic Compounds and Bioactivities.

This study investigated the effect of co-ingesting Natal plums (Carissa macrocarpa) and Marula nuts (Sclerocarya birrea) on the bioaccessibility and uptake of anthocyanins, antioxidant capacity, and the ability to inhibit α-glucosidase. A Natal plum-Marula nut bar was made by mixing the raw nuts and the fruit pulp in a ratio 1:1 (v/v). The cyanidin-3-O-sambubioside (Cy-3-Sa) and cyanidin-3-O-glucoside content (Cy-3-G) were quantified using the ultra-high performance liquid chromatography-quadrupole time-of-flight mass spectrometry (UHPLC/Q-TOF-MS). Inclusion of Natal plum in the Marula nut bar increased the Cy-3-Sa, Cy-3-G content, antioxidants capacity and α-glucosidase inhibition compared to ingesting Marula nut separately at the internal phase. Adding Natal plum to the Marula nut bar increased bioaccessibility of Cy-3-Sa, Cy-3-G, quercetin, coumaric acid, syringic acid and ferulic acid to 80.2% and 71.9%, 98.7%, 95.2%, 51.9% and 89.3%, respectively, compared to ingesting the Natal plum fruit or nut separately.

Occurrence and human health risk assessment of mineral elements and pesticides residues in bee pollen.

Bee pollen contains a diversity of bioactive components. Nevertheless, since pollen is retrieved from a variety of plants, including the cultivated ones which are subjected to agrochemical treatments, its contamination is unavoidable. In this context, 45 samples of pollen were analysed with optimized analytical methods for trace and macro elements (ICP-MS), pesticides and metabolites residues (LC & GC-MS/MS) content. According to the results, potassium and iron were the most abundant in terms of concentration and frequency of detection, while the contribution of the most hazardous elements, such as lead, arsenic, cadmium and mercury, to the total concentration of trace elements was lower than 1%. For pesticides, coumaphos was the most frequently detected in the examined samples (22%), followed by propargite, azoxystrobin, dimethoate and cypermethrin. Non-carcinogenic health risk assessment demonstrated in the majority of cases negligible risk for adults and children. On the contrary, carcinogenic risk assessment considering a worst case scenario disclosed nickel and in less extent chromium and arsenic, as risk drivers, exhibiting in several samples carcinogenic risk values for adults above the safety threshold. Yet, regarding that both adults and children unlikely will daily consume such pollen quantities, especially on a long-term basis, an overestimation of risk should be appraised.

Quality Assessment of Goldenrod, Milkweed and Multifloral Honeys Based on Botanical Origin, Antioxidant Capacity and Mineral Content.

The goal of the study was to evaluate the pollen spectrum, antioxidant capacity and mineral content of four Hungarian honey types, using multivariate statistical analysis. The light colored honeys were represented by milkweed honey and a multifloral (MF) honey with dominant pollen frequency of linden (MF-Tilia); the darker ones were goldenrod honey and a multifloral honey with Lamiaceae pollen majority (MF-Lamiaceae). The pollen spectrum of the samples was established with melissopalynological analysis. The absorbance of the honeys positively correlated with the antioxidant capacity determined with three of the used methods (TRC, TEAC, DPPH), but not with ORAC. The latter method correlated negatively also with other antioxidant methods and with most of the mineral values. MF-Tilia had high ORAC value, K and Na content. The MF-Lamiaceae had the highest K, Mg, P, S, Cu and Zn content, the last five elements showing strict correlation with the TRC method. The darker goldenrod honey had higher SET values and total mineral content, than the milkweed honey. The above character-sets facilitate identification of each honey type and serve as indicators of variety. The antioxidant levels and mineral content of honeys allowed their clear separation by principal component analysis (PCA).

Purity of Olive Oil Commercially Available in Poland.

The aim of this study was to examine olive oils purchased in Poland for their compliance with label declarations and EEC criteria. Statistical analysis was used to compare the olive oils in terms of their content and composition of essential constituents and color parameters. Fifty olive oils (extra virgin, bioextra virgin, cold-pressed, refined, and pomace) from different countries (Spain, Italy, Greece, Portugal, Germany, France, Israel, and the European Union), were purchased commercially in Poland. The contents of triacylglycerols, sterols, and tocopherols, the fatty acid composition, and the color parameters were determined using chromatographic and spectrophotometric methods. Statistical methods were used to divide the olive oils into clusters. Our results show that the composition and color parameters of olive oils available commercially in Poland, excluding pomace olive oils, are similar. It can thus be concluded that, irrespective of the type of olive oil stated on the label, their quality is the same or very similar.