Characterization of a symbiotic beverage based on water-soluble soybean extract fermented by Lactiplantibacillus plantarum ATCC 8014.

The health benefits of functional foods are associated with consumer interest and have supported the growth of the market for these types of foods, with emphasis on the development of new formulations based on plant extracts. Therefore, the present study aimed to characterize a symbiotic preparation based on water-soluble soy extract, supplemented with inulin and xylitol and fermented by Lactiplantibacillus plantarum ATCC 8014. Regarding nutritional issues, the symbiotic formulation can be considered a source of fiber (2 g/100 mL) and proteins (2.6 g/100 mL), and it also has a low-fat content and low caloric value. This formulation, in terms of microbiological aspects, remained adequate to legal standards after storage for 60 days under refrigeration and also presented an adequate quantity of the aforementioned probiotic strain, corresponding to 9.11 Log CFU.mL-1. These viable L. plantarum cells proved to be resistant to simulated human gastrointestinal tract conditions, reaching the intestine at high cell concentrations of 7.95 Log CFU.mL-1 after 60 days of refrigeration. Regarding sensory evaluation, the formulation showed good acceptance, presenting an average overall impression score of 6.98, 5.98, and 5.16, for control samples stored for 30 and 60 days under refrigeration, respectively. These results demonstrate that water-soluble soy extract is a suitable matrix for fermentation involving L. plantarum ATCC 8014, supporting and providing data on the first steps towards the development of a symbiotic functional food, targeting consumers who have restrictions regarding the consumption of products of animal origin, diabetics, and individuals under calorie restrictions.

An immunochromatographic strip sensor for rapid and sensitive detection of candesartan, olmesartan medoxomil, and irbesartan in herbal beverages.

Sartans, as a class of antihypertensive drugs, pose a threat to human health when illegally added to herbal beverages. It is crucial to detect sartans in herbal beverages. We have developed a highly sensitive monoclonal antibody against candesartan (CAN), olmesartan medoxomil (OLM), and irbesartan (IRB), with 50% inhibitory concentrations (IC50) that were obtained via indirect enzyme-linked immunosorbent assay (ic-ELISA) as 0.178 ng mL-1, 0.185 ng mL-1, and 0.262 ng mL-1 against CAN, OLM, and IRB, respectively. Based on this monoclonal antibody, we developed a rapid screening method for CAN, OLM, and IRB in herbal beverage samples using an immunochromatographic assay (ICA) strip. Test for 15 minutes after simple and rapid sample pre-treatment and the results of this method can be obtained through naked eye observation. The detection limits (LODs) of the ICA strip for CAN, OLM, and IRB in herbal beverage samples are lower than 0.15 ng mL-1, and the results of the ICA strip and ic-ELISA are consistent in spiked samples and recovery experiments. Therefore, this method can quickly, efficiently, and reliably achieve high-throughput on-site rapid detection of illegally added CAN, OLM, and IRB in herbal beverages.

FoodEx2 Harmonization of the Food Consumption Database from the Italian IV SCAI Children's Survey.

Estimating the habitual food and nutrient intakes of a population is based on dietary assessment methods that collect detailed information on food consumption. Establishing the list of foods to be used for collecting data in dietary surveys is central to standardizing data collection. Comparing foods across different data sources is always challenging. Nomenclatures, detail, and classification into broad food groups and sub-groups can vary considerably. The use of a common system for classifying and describing foods is an important prerequisite for analyzing data from different sources. At the European level, EFSA has addressed this need through the development and maintenance of the FoodEx2 classification system. The aim of this work is to present the FoodEx2 harmonization of foods, beverages, and food supplements consumed in the IV SCAI children's survey carried out in Italy. Classifying foods into representative food categories predefined at European level for intake and exposure assessment may lead to a loss of information. On the other hand, a major advantage is the comparability of data from different national databases. The FoodEx2 classification of the national food consumption database represented a step forward in the standardization of the data collection and registration. The large use of FoodEx2 categories at a high level of detail (core and extended terms) combined with the use of descriptors (facets) has minimized information loss and made the reference food categories at country level comparable with different food databases at national and international level.

Effects of various beverages on characteristics of provisional restoration materials.

OBJECTIVE: To investigate the effect of common beverages on four currently used provisional restoration materials: Protemp®4, Integrity®, polymethyl methacrylate (PMMA) block, and acrylic resin. Flowable resin composite is included as a control group. MATERIALS AND METHODS: Each material was formed into disks of 10-mm diameter and 4-mm thickness (N = 40) by loading the material into acrylic molds. The exposed surface in the mold was covered using a glass slide to prevent an oxygen inhibition layer, and polymerization then proceeded. The solidified disks were placed in distilled water for 24 h. These samples (n = 8) were then immersed for 14 days in one of four different beverages: water, orange juice, cola, and coffee. Changes in color dimension, hardness, and roughness were observed and then analyzed using two-way repeated analysis of variance. RESULTS: The provisional materials had more obvious changes in all three color dimensions than the flowable resin composite. Integrity showed the biggest changes, followed by acrylic resin and PMMA block, whereas Protemp had the smallest changes. The hardness of all the materials significantly decreased after immersion in any of the beverages for 14 days. There were no changes in surface roughness when the materials were immersed in distilled water. The surface roughness of the PMMA block significantly decreased in orange juice whereas that of Integrity and acrylic resin significantly increased in cola. CONCLUSION: Different kinds of provisional materials had different degrees of staining due to their composition. Moisture had a significant influence on the hardness of materials, and the acidity of cola significantly roughened the surface of the provisional materials.

Effects of green tea and roasted green tea on human responses.

Our objective was to elucidate the effects of tea consumption on refreshment and stress reduction/recovery through examining the multiple associations among factors such as various physiological responses and task performance. Participants included 20 healthy young men who performed a mental arithmetic task while 11 physiological responses were measured. The experiments were conducted twice under different beverage consumption conditions on separate days. The mental arithmetic task was executed six times in 1 day; participants ingested hot water, green tea, or roasted green tea (hojicha) before each task. Several subjective assessments: subjective fatigue, stress, mental workload, and flow were evaluated after each task. The R-R intervals, heart rate variability spectral components, the Poincaré plot indices (SD1 and SD2) and plethysmogram amplitude tended to decrease during task periods compared to resting periods. Tissue blood volume/flow (TBV, TBF) and near-infrared spectroscopy responses (NIRS) were lower in the tea condition than in the hot water condition. By scrutinizing various indicators, we found that aromatic stimulation of Japanese tea beverages has the potential to induce positive effects, enhance mental task performance, promote refreshment, and alleviate feelings of fatigue. These positive effects were observed even in small quantities and within a short duration, mirroring responses observed in daily consumption.

Dissecting new lipids and their composition in herbal tea using untargeted LC/MS.

Herbal teas and beverages have gained global attention because they are rich in natural bioactive compounds, which are known to have diverse biological effects, including antioxidant and anticarcinogenic properties. However, the lipidomic profiles of herbal teas remain unclear. In this study, we applied an untargeted lipidomics approach using high-performance liquid chromatography coupled with linear ion trap-Orbitrap mass spectrometry to comprehensively profile, compare, and identify unknown lipids in four herbal teas: dokudami, kumazasa, sugina, and yomogi. A total of 341 molecular species from five major classes of lipids were identified. Multivariate principal component analysis revealed distinct lipid compositions for each of the herbs. The fatty acid α-linolenic acid (FA 18:3) was found to be abundant in kumazasa, whereas arachidonic acid (FA 20:4) was the most abundant in sugina. Interestingly, novel lipids were discovered for the first time in plants; specifically, short-chain fatty acid esters of hydroxy fatty acids (SFAHFAs) with 4-hydroxy phenyl nonanoic acid as the structural core. This study provides insight into the lipidomic diversity and potential bioactive lipid components of herbal teas, offering a foundation for further research into their health-promoting properties and biological significance.

Ethnopharmacology of five flowers herbal tea, a popular traditional beverage in Hong Kong and South China.

BACKGROUND: It has been a long-standing tradition of using herbal tea for preventive and therapeutic healthcare in Hong Kong and South China and Five Flowers Tea is one of the most popular herbal teas. Based on the principle of traditional Chinese medicine, the pharmacological functions are to clear heat and dispel dampness in the body. Heat and dampness are thought to contribute to a range of health problems, especially during the hot and humid season in South China and Hong Kong. The most prevalent herbs in the formula contain bioactive compounds including flavonoids, alkaloids and terpenoids, which have a wide range of pharmacological properties including anti-inflammation, antivirus, antidiarrhoea, antibacteria, and antioxidation. However, with the composition varies widely, the ethnopharmacological benefits described may not be delivered uniformly. This study is to provide a comprehensive analysis on the composition of the Five Flowers Tea sold in Hong Kong and investigate the rationale behind the selection of herbs used in the formula. This study also provides information on the variation and quality of the Five Flowers Tea in the market. METHODS: Thirty-three Five Flowers Tea samples were collected from various locations in Hong Kong. The size, texture, colour and organoleptic properties were documented. Macroscopic and molecular authentication methods were employed to identify the individual components. RESULTS: Macroscopic identification revealed there were 23 herbs belonging to 18 plant families. The most prevalent herb was Bombax ceiba L., followed by Chrysanthemum morifolium. Ten adulterants and the existence of insect Lasioderma serricorne were confirmed by DNA barcoding techniques. CONCLUSION: This study employed a comprehensive approach to authenticate the herbs in Five Flowers Tea samples collected from various locations in Hong Kong. Macroscopic and molecular methods were used to identify the herbs and adulterants. The findings revealed the varied composition in Five Flowers Tea and the occurrence of adulterants in some samples. This shows that quality assurance of Five Flowers Tea is essential for the effective use of this popular folk medicine.

Assessment of the color stability of two silicone elastomers for maxillofacial prostheses upon exposure to cold beverages.

PURPOSE: This study investigated the color stability of different commercially available silicone materials for facial prostheses upon exposure to everyday beverages. It was hypothesized that the beverages would not alter the color of the silicone under conditions simulating daily exposure. METHODS: Sixty specimens were fabricated using two materials - VST-50 and Silfy - and exposed to commercially available cold mineral water, tea, or coffee. Specimen color was evaluated on days 1 and 15. The color was measured with a spectrophotometer based on CIELab system and color differences were calculated as ΔE. Statistical analysis was performed using the Kruskal-Wallis test and Mann-Whitney U test. RESULTS: The mean ΔE values after 15 days of exposure to mineral water, cold green tea, and coffee were 1.016, 3.480, and 3.636 for VST-50 and 0.440, 0.798, and 1.425 for Silfy, respectively. Both materials showed significant differences in color, and VST-50 showed a greater color change than Silfy, especially for coffee. CONCLUSION: Pigmented silicone elastomers have low color stability, leading to an overall color change in silicone prostheses when exposed to pigmented beverages. Color changes in such prostheses can be mitigated by selecting materials with better color stability to extend their longevity.

Consumption Patterns of Sugar-Sweetened Beverages and Association with Undernutrition among Children Aged 9-17 Years in Guangzhou, China: A Cross-Sectional Study.

Globally, the high consumption levels of sugar-sweetened beverages (SSBs) and their effect on health have drawn significant attention. This study aimed to identify the consumption patterns of SSBs among children in rural areas of Guangzhou, China, and explore their association with undernutrition. A total of 1864 children aged 9-17 years old were included in this study. Demographics, lifestyle behaviors, and anthropometric and dietary information were collected. Factor analysis was used to identify patterns of SSBs, while nutritional status was assessed using Body Mass Index (BMI). Latent class analysis was used to establish dietary preference models. Log-binomial regression analysis was used to analyze the association between SSBs consumption patterns and undernutrition. The undernutrition prevalence in children was 14.54-19.94% in boys and 9.07% in girls. Three SSB consumption patterns were identified, including the plant protein pattern, dairy-containing pattern, and coffee pattern. Both medium-high (Q3) and the highest (Q4) scores in the dairy-containing pattern were positively associated with the risk of undernutrition, especially in boys. Furthermore, the highest scores in the plant protein pattern and coffee pattern were positively associated with the risk of undernutrition in children aged 9-10 years old. The dairy-containing pattern was a risk factor for undernutrition in children, especially for boys; the plant protein patterns and coffee patterns were risk factors for undernutrition in children aged 9-10 years old. The findings of the study can provide scientific evidence and policy recommendations for improving children's health conditions.

INFLUENCE OF AGING, BEVERAGES, AND MOUTH WASH SOLUTIONS ON THE MICROSTRUCTURAL AND COLOR STABILITY OF DIFFERENT DENTAL CERAMICS: AN IN VITRO STUDY.

Рurроse - to evaluate the influence of aging, beverages, and mouthwash solutions on the microstructural and color stability of three CAD/CAM ceramic materials. In total, 87 specimens (7×5×1.5 mm) were prepared from 3 CAD/CAM ceramic groups, Lithium Disilicate glass ceramic (IPS e.max CAD), Extra translucent zirconia (VITA YZ), and Resin Nanoceramic (Cerasmart 270). All the materials were A2 or equivalent shades. After hydrothermal aging in distilled water at 5 C to 55 C for (10.000 cycles). The samples were randomly allocated into 3 groups (n=27) and immersion (staining) for one week in 3 different solutions coffee, green tea, and chlorhexidine. The baseline measurements of ceramic discs were recorded for color change and 2 samples of each group sent for SEM (microstructure) images before aging and staining. The second measurement was recorded after 10000 thermocycling and immersion in staining agents for 7 days. Statistical analysis were performed with an independent Kruskal-wallis test . The significant level was set at P≤0.05. ∆E values for lithium Disilicate after immersion in coffee, green tea and chlorhexidine gluconate were 3.167, 1.847 and 2.022, respectively. corresponding ∆E values for VITA XT were 3.438, 4.201 and 2.267. meanwhile Cerasmart shows more sensitivity for staining than LD and VITA of 4.454, 2.926 and 2.933. Within limitation of this study lithium disilicate showed the best color stability with values less than perception threshold. VITA and Cerasmart show higher sensitivity for staining with VITA more affected by green tea (Higher than clinically accepted threshold) and Cerasmart more affected by coffee (higher than clinically accepted threshold).

Effect of various staining beverages on the color stability of CAD/CAM PMMA denture teeth: An in vitro study.

OBJECTIVE: This study aimed to compare the color change of computer-aided design (CAD)/computer-aided manufacturing (CAM) polymethyl methacrylate (PMMA) denture teeth and conventional acrylic teeth after immersion in three staining beverages (coffee, red tea, and cola) for a day, 7 days, and 30 days. MATERIALS AND METHODS: Group 1: Conventional acrylic teeth (n = 32). Group 2: Milled CAD/CAM teeth out of PMMA disc (n = 32). The specimens of each material were further divided into four subgroups: (1) Control group, distilled water (n = 16). (2) Red tea solution (n = 16). (3) Coffee solution (n = 16). (4) Cola (n = 16). The color change ( ∆ E $\unicode{x02206}E$ ) was assessed using a spectrophotometer at four time points: at the baseline (t0 ), on the 1st day (t1 ), on the 7th day (t2 ), and the 30th day (t3 ) of immersion. Kolmogorov-Smirnov test was applied, followed by performing independent samples t test, one-way analysis of variance and post-hoc Tukey tests to compare the color change values at different time points. RESULTS: The mean score of NBS values of the coffee solution indicates perceivable color change at the end of the 30th day in the conventional acrylic teeth group. It was 0.843 ± 0.395 at t1 , then increased to 1.017 ± 0.477 at t2 and to 2.259 ± 1.059 at t3 . There is a statistically significant difference (p < 0.05) in color change values between both tooth types at the end of the 30th day of immersion in red tea solution and a statistically significant difference at the end of the 7th day (p < 0.05) and the 30th day (p < 0.05) of immersion in coffee solution. CONCLUSIONS: CAD/CAM PMMA teeth are more color stable than conventional acrylic teeth after 30 days of immersion in coffee and red tea solution.

A review of endocrine disrupting chemicals migration from food contact materials into beverages.

A significant and pressing issue revolves around the potential human exposure to endocrine disrupting chemicals (EDCs), which pose a substantial risk primarily through contaminated beverages. However, a comprehensive review for comparison of the migration rates of EDCs into these matrixes is currently lacking. This study reviews the beverages contamination with EDCs, including phthalates (PAEs), bisphenol A (BPA), hormone-like compounds, elements, and other organic EDCs. Also, the EDCs migration into milk and other dairy products, coffee, tea, and cold beverages related to their release from contact materials, preparation components, and storage conditions are briefly summarized. The data illustrates that besides the contamination of raw materials, the presence of EDCs associated with the type of food contact materials (FCMs)and their migration rate is increased with acidity, temperature, and storage time. The highest concentration of PAEs was detected from plastic and synthetic polymer films, while BPA strongly leaches from epoxy resins and canned metal. Furthermore, the presence of elements with endocrine disrupting characteristics was confirmed in cold beverages, soft drinks, hot drink and milk. Moreover, hormone-like compounds have been found to be released from coffee preparation components. Despite the few data about the migration rate of other EDCs including UV-stabilizers, surfactants, and antibacterial compounds into beverages, their presence was reported into milk, coffee, and different beverages, especially in packed samples. Studies on the EDCs leaching have primarily focused on PAEs and BPA, while other compounds require further investigation. Regardless, the possible risk that EDCs pose to humans through beverage consumption cannot be overlooked.

Association of sugar intake from different sources with cardiovascular disease incidence in the prospective cohort of UK Biobank participants.

BACKGROUND: The relation between incident cardiovascular disease (CVD) and sugar might not only depend on the quantity consumed but also on its source. This study aims to assess the association between various sources of dietary sugars and CVD incidence in the prospective population-based UK Biobank cohort. METHODS: A total of 176,352 participants from the UK Biobank with at least one web-based dietary questionnaire (Oxford WebQ) for assessment of sugar intake were included in this study. Mean follow-up lasted 10.9 years (standard deviation 2.0), with 12,355 incident cases of CVD. To determine the association of free sugar (FS) and intrinsic sugar intake with incident CVD, hazard ratios (HR) were calculated using Cox proportional hazard regression models. FS intake from beverages and beverage subtypes, i.e., soda/fruit drinks, juice, milk-based drinks, and tea/coffee, as well as from solid foods and solids subtypes, i.e., treats, cereals, toppings, and sauces, was included as penalised cubic splines. RESULTS: FS intake showed a J-shaped relationship with CVD risk, reaching the lowest HR (HR-nadir) at 9 %E, while intrinsic sugars displayed a non-linear descending association, with the HR-nadir at 14 %E. FS in beverages demonstrated a significant linear relationship with CVD with the HR-nadir at 3 %E, while FS in solids exhibited a significant non-linear U-shaped relationship with the HR-nadir at 7 %E. Within the beverage subtypes, soda/fruit drinks displayed a linear relationship, as did to a lesser extent FS in milk-based drinks and tea/coffee. Juice, however, showed a significant U-shaped relationship with CVD risk. Among solid foods subtypes, FS in treats had a J-shaped relation with the HR-nadir at 5 %E, and FS in cereals showed a linear association. In comparison, FS in toppings and sauces exhibited a U-shaped pattern with HR-nadir at 3 %E and 0.5 %E, respectively. All major results remained similar in various sensitivity analyses and were more robust for ischemic heart disease compared to stroke. CONCLUSIONS: Only some sources of FS exhibit a robust positive association with CVD incidence. Public health efforts aiming at the reduction of CVD risk should prioritise the reduction of sugary beverages with an emphasis on soda/fruit drinks.

Caffeinated beverages intake and risk of deep vein thrombosis: A Mendelian randomization study.

This study aimed to explore the potential link between coffee and tea consumption and the risk of deep vein thrombosis (DVT) through Mendelian randomization (MR) analysis. Employing the MR, we identified 33 single nucleotide polymorphisms (SNPs) as instrumental variables (IVs) for coffee intake and 38 SNPs for tea intake. The investigation employed the inverse-variance weighted (IVW) method to evaluate the causal impact of beverage consumption on DVT risk. Additionally, MR-Egger and MR-PRESSO tests were conducted to assess pleiotropy, while Cochran's Q test gauged heterogeneity. Robustness analysis was performed through a leave-one-out approach. The MR analysis uncovered a significant association between coffee intake and an increased risk of DVT (odds ratio [OR] 1.008, 95% confidence interval [CI] = 1.001-1.015, P = 0.025). Conversely, no substantial causal effect of tea consumption on DVT was observed (OR 1.001, 95% CI = 0.995-1.007, P = 0.735). Importantly, no significant levels of heterogeneity, pleiotropy, or bias were detected in the instrumental variables used. In summary, our findings suggest a modestly heightened risk of DVT associated with coffee intake, while tea consumption did not exhibit a significant impact on DVT risk.

Exploring the microbiome of coffee plants: Implications for coffee quality and production.

Coffee stands as one of the world's most popular beverages, and its quality undergoes the influence of numerous pre- and post-harvest procedures. These encompass genetic variety, cultivation environment, management practices, harvesting methods, and post-harvest processing. Notably, microbial communities active during fermentation hold substantial sway over the ultimate quality and sensory characteristics of the final product. The interaction between plants and microorganisms assumes critical significance, with specific microbes assuming pivotal roles in coffee plant growth, fruit development, and, subsequently, the fruit's quality. Microbial activities can synthesize or degrade compounds that influence the sensory profile of the beverage. However, studies on the metabolic products generated by various coffee-related microorganisms and their chemical functionality, especially in building sensory profiles, remain scarce. The primary aim of this study was to conduct a literature review, based on a narrative methodology, on the current understanding of the plant-microorganism interaction in coffee production. Additionally, it aimed to explore the impacts of microorganisms on plant growth, fruit production, and the fermentation processes, directly influencing the ultimate quality of the coffee beverage. Articles were sourced from ScienceDirect, Scopus, Web of Science, and Google Scholar using specific search terms such as "coffee microorganisms", "microorganisms-coffee interactions", "coffee fermentation", "coffee quality", and 'coffee post-harvest processing". The articles used were published in English between 2000 and 2023. Selection criteria involved thoroughly examining articles to ensure their inclusion was based on results about the contribution of microorganisms to both the production and quality of the coffee beverage. The exploration of microorganisms associated with the coffee plant and its fruit presents opportunities for bioprospecting, potentially leading to targeted fermentations via starter cultures, consequently generating new profiles. This study synthesizes existing data on the current understanding of the coffee-associated microbiome, its functionalities within ecosystems, the metabolic products generated by microorganisms, and their impacts on fermentation processes and grain and beverage quality. It highlights the importance of plant-microorganism interactions in the coffee production chain.

Unveiling the presence of fluoride in commercial tea infusion: Factors influencing its release and its adsorptive elimination by indigenously developed nanoadsorbents.

Drinking tea, which is globally one of the most widely consumed beverages, is a potential source of fluoride toxicity. This research aimed at fluoride estimation in the infusions of commercial black tea and green tea samples, purchased from the local Indian market, systematic evaluation of the factors influencing the fluoride release and the adsorptive removal of fluoride using the indigenously developed nanoadsorbents. All the prepared infusions had fluoride content above the permissible WHO limits. Various factors, which affect the release of fluoride from tea leaves into the infusion include type of water, tea dosage and brewing time. The investigations revealed that, the fluoride content in the black tea infusions was much higher than the green tea infusions. Further, it also depended on the amount of tea leaves used for brewing. The fluoride, present in tea leaves, is released gradually and within just 1 min of brewing, the concentration of fluoride in the infusions was well above the permissible WHO limits. It was also observed that, the dried unprocessed tea leaves, when brewed in water, had high fluoride content. This further confirmed the presence of fluoride in tea infusion, which demands an efficient remediation technique. The developed nanoadsorbents exhibited efficient defluoridation of groundwater, and were therefore tested for their efficiency in defluoridating tea infusions as well. These nanoadsorbents could efficiently eliminate fluoride from both green and black tea infusions, bringing down the fluoride content below the WHO limits, thereby rendering the infusions safe. They exhibited rapid kinetics with high efficiency in adsorbing fluoride from tea infusions. These properties make them potential adsorbents for defluoridating tea infusion, which provides a probable solution to the problem of fluoride toxicity from drinking tea. This is one of the first reports on a technique for eliminating fluoride from tea infusions.

Beverage consumption and facial skin aging: Evidence from Mendelian randomization analysis.

BACKGROUND: Observational studies have linked coffee, alcohol, tea, and sugar-sweetened beverage (SSB) consumption to facial skin aging. However, confounding factors may influence these studies. The present two-sample Mendelian randomization (MR) investigated the potential causal association between beverage consumption and facial skin aging. METHODS: The single-nucleotide polymorphisms (SNPs) associated with coffee, alcohol, and tea intake were derived from the IEU project. The SSB-associated SNPs were selected from a genome-wide association study (GWAS). Data on facial skin aging were derived from the largest GWAS involving 16 677 European individuals. The inverse variance-weighted (IVW) was the main MR analysis method, supplemented by other methods (MR-Egger, weighted median, simple mode, and weighted mode). The MR-Egger intercept analysis was used for sensitivity analysis. Moreover, we conducted a replication analysis using data from another GWAS dataset on coffee consumption to validate our findings. RESULTS: Four instrumental variables (IVs) sets were used to examine the causal association between beverage consumption (coffee, alcohol, tea, SSB) and facial skin aging. Our results revealed that genetically predicted higher coffee consumption reduced the risk of facial skin aging (OR: 0.852; 95% CI: 0.753-0.964; p = 0.011, IVW method). The sensitivity analysis confirmed the robustness of the findings, with no evidence of pleiotropy or heterogeneity. The results of replicated MR analysis on coffee consumption were consistent with the initial analysis (OR = 0.997; 95% CI = 0.996-0.999; p = 0.003, IVW method). CONCLUSIONS: This study manifests that higher coffee consumption is significantly associated with a reduced risk of facial skin aging. These findings can offer novel strategies for identifying the underlying etiology of facial skin aging.

Facile fabrication of carbon nanotube hollow microspheres as a fiber coating for ultrasensitive solid-phase microextraction of phthalic acid esters in tea beverages.

The efficient extraction of phthalic acid esters (PAEs) is challenging due to their extremely low concentration, complicated matrices and hydrophilicity. Herein, hollow microspheres, as an ideal coating, possess significant potential for solid-phase microextraction (SPME) due to their fascinating properties. In this study, multiwalled carbon nanotube hollow microspheres (MWCNT-HMs) were utilized as a fiber coating for the SPME of PAEs from tea beverages. MWCNT-HMs were obtained by dissolving the polystyrene (PS) cores with organic solvents. Interestingly, MWCNT-HMs well maintain the morphology of the MWCNTs@PS precursors. The layer-by-layer (LBL) assembly of MWCNTs on PS microsphere templates was achieved through electrostatic interactions. Six PAEs, di-ethyl phthalate (DEP), di-iso-butyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzyl butyl phthalate (BBP), di-2-ethylhexyl phthalate (DEHP) and di-n-octyl phthalate (DOP), were selected as target analytes for assessing the efficiency of the coating for SPME. The stirring rate, sample solution pH and extraction time were optimized by using the Box-Behnken design. Under optimal working conditions, the proposed MWCNT-HMs/SPME was coupled with gas chromatography-tandem mass spectrometry (GC-MS/MS) to achieve high enrichment factors (118-2137), wide linearity (0.0004-10 µg L-1), low limits of detection (0.00011-0.0026 µg L-1) and acceptable recovery (80.2-108.5%) for the detection of PAEs. Therefore, the MWCNT-HM coated fibers are promising alternatives in the SPME method for the sensitive detection of PAEs at trace levels in tea beverages.

Ultrasensitive determination of selenium in food samples and its speciation in water and beverages using thiosemicarbazide-incorporated graphene and total-reflection X-ray fluorescence spectrometry.

The paper presents a new analytical procedure for the determination and speciation of trace and ultratrace selenium in water, beverages, seafood, milk, and vegetables. The developed method is based on the dispersive micro-solid phase extraction with the use of new thiosemicarbazide-incorporated graphene as a solid sorbent, in combination of the total-reflection X-ray fluorescence spectrometry (TXRF). As a result, we have created an auspicious analytical tool for fast and sensitive analysis of samples with a complex matrix. Regardless of the specimen type, the method is characterized by a very low detection limit of 1.7 pg mL-1 and high precision. The developed strategy allowed us to solve common problems associated with selenium loss during the sample preparation for the TXRF measurement and also improve its performance toward the analysis of beverages and high saline/solid samples, which may even be impossible to perform using standard sample preparation procedures for a TXRF measurement.

Reverse Flow Injection Spectrophotometric Determination of Total Acidity in Beverages Using Butterfly Pea Flower Extract.

BACKGROUND: Monitoring total acidity during beverage production is crucial for quality control (QC). The standard acid-base titration, though widely used, is slow and generates hazardous waste through the use of acid-base indicators. OBJECTIVE: To develop an analysis method for beverage samples to determine total acidity using a natural reagent from butterfly pea flower as the colorimetric reagent. METHODS: The determination of total acidity in beverages was based on the reaction of citric acid with anthocyanin extracted from butterfly pea flowers. The decreased absorbance of anthocyanin was measured at 620 nm. A two-line reverse flow injection manifold was used to perform online dilution of samples. RESULTS: Under optimal conditions, the calibration curve equation 1/A = 0.03782C + 0.00241 (A = absorbance and C = concentration) was linear over a range of 0.050-0.25% (w/v) citric acid. The LOD and LOQ were 0.0123 and 0.0409% (w/v), respectively. The system achieved a throughput of 120 samples per hour with comparable accuracy and precision to the standard titrimetric method. CONCLUSION: The injection of butterfly pea flower extract into beverage samples with online dilution in a reverse flow injection system (FIS) was reported for the first time for the determination of total acidity. HIGHLIGHTS: Use of a green reagent in the method reflects its alignment with the principles of green analytical chemistry, providing a rapid and straightforward solution.