Quantification of caffeine in coffee cans using electrochemical measurements, machine learning, and boron-doped diamond electrodes.

Electrochemical measurements, which exhibit high accuracy and sensitivity under low contamination, controlled electrolyte concentration, and pH conditions, have been used in determining various compounds. The electrochemical quantification capability decreases with an increase in the complexity of the measurement object. Therefore, solvent pretreatment and electrolyte addition are crucial in performing electrochemical measurements of specific compounds directly from beverages owing to the poor measurement quality caused by unspecified noise signals from foreign substances and unstable electrolyte concentrations. To prevent such signal disturbances from affecting quantitative analysis, spectral data of voltage-current values from electrochemical measurements must be used for principal component analysis (PCA). Moreover, this method enables highly accurate quantification even though numerical data alone are challenging to analyze. This study utilized boron-doped diamond (BDD) single-chip electrochemical detection to quantify caffeine content in commercial beverages without dilution. By applying PCA, we integrated electrochemical signals with known caffeine contents and subsequently utilized principal component regression to predict the caffeine content in unknown beverages. Consequently, we addressed existing research problems, such as the high quantification cost and the long measurement time required to obtain results after quantification. The average prediction accuracy was 93.8% compared to the actual content values. Electrochemical measurements are helpful in medical care and indirectly support our lives.

The Rise of Boron-Containing Compounds: Advancements in Synthesis, Medicinal Chemistry, and Emerging Pharmacology.

Boron-containing compounds (BCC) have emerged as important pharmacophores. To date, five BCC drugs (including boronic acids and boroles) have been approved by the FDA for the treatment of cancer, infections, and atopic dermatitis, while some natural BCC are included in dietary supplements. Boron's Lewis acidity facilitates a mechanism of action via formation of reversible covalent bonds within the active site of target proteins. Boron has also been employed in the development of fluorophores, such as BODIPY for imaging, and in carboranes that are potential neutron capture therapy agents as well as novel agents in diagnostics and therapy. The utility of natural and synthetic BCC has become multifaceted, and the breadth of their applications continues to expand. This review covers the many uses and targets of boron in medicinal chemistry.

Towards the Application of Purely Inorganic Icosahedral Boron Clusters in Emerging Nanomedicine.

Traditionally, drugs were obtained by extraction from medicinal plants, but more recently also by organic synthesis. Today, medicinal chemistry continues to focus on organic compounds and the majority of commercially available drugs are organic molecules, which can incorporate nitrogen, oxygen, and halogens, as well as carbon and hydrogen. Aromatic organic compounds that play important roles in biochemistry find numerous applications ranging from drug delivery to nanotechnology or biomarkers. We achieved a major accomplishment by demonstrating experimentally/theoretically that boranes, carboranes, as well as metallabis(dicarbollides), exhibit global 3D aromaticity. Based on the stability-aromaticity relationship, as well as on the progress made in the synthesis of derivatized clusters, we have opened up new applications of boron icosahedral clusters as key components in the field of novel healthcare materials. In this brief review, we present the results obtained at the Laboratory of Inorganic Materials and Catalysis (LMI) of the Institut de Ciència de Materials de Barcelona (ICMAB-CSIC) with icosahedral boron clusters. These 3D geometric shape clusters, the semi-metallic nature of boron and the presence of exo-cluster hydrogen atoms that can interact with biomolecules through non-covalent hydrogen and dihydrogen bonds, play a key role in endowing these compounds with unique properties in largely unexplored (bio)materials.

Electrogenerated chemiluminescence at boron-doped diamond electrodes.

Electrogenerated chemiluminescence (ECL) refers to the phenomenon of light emission from molecular species which is triggered by an electrochemical reaction. Therefore, like most electrochemical systems, the electrode material plays a pivotal role and much effort has been made in order to find the best material for ECL, in terms of light signal intensity and long-term stability, especially after the development of ECL for analytical applications. In this article, we will introduce and highlight the distinctive features of boron-doped diamond (BDD) as an electrode material for ECL which has complementary properties compared to the most common metals (e.g., Au or Pt) and carbon materials (e.g., glassy carbon, carbon nanotubes and graphene). Boron-doped diamond electrodes emerged as novel electrodes, gaining more and more interest from the electrochemical community for their peculiar characteristics such as a wide solvent window, low capacitance, resistance to fouling and mechanical robustness. Furthermore, compared to metal electrodes, BDD does not form an oxide layer in aqueous solutions, and the sp3 carbon hybridization gives BDD the ability to enable peculiar electrochemical reactions that are not possible on sp2 carbon materials. Electrogenerated chemiluminescence investigations with boron-doped diamond electrodes have been reported for common ECL systems (luminophores and co-reactants), and special ECL that is only possible on BDD which includes the in situ electrochemical generation of the co-reactant.

Simultaneous electrochemical detection of ozone and free chlorine with a boron-doped diamond electrode.

O3 and free chlorine play significant roles in disinfection and organic degradation. There are numerous reports about their mixed-use, yet detection of the residual concentrations is not easily accomplished, whilst the interactions between them remain unclear. Herein, we develop a detection method using a boron-doped diamond (BDD) electrode to achieve the simultaneous determination of O3 and free chlorine, which benefits from the unique property of the wide potential window of BDD electrodes. It is indicated that O3 can always be accurately determined at 0.35 V vs. Ag/AgCl in an acidic solution (pH = 4-5), whether or not free chlorine is present in the solution, whereas free chlorine can be precisely monitored at -0.78 V vs. Ag/AgCl only after the O3 is completely depleted. Furthermore, in a basic solution (pH = 9-10), the reduction peak of O3 at 0.57 V vs. Ag/AgCl promptly disappears accompanied by a decrease in the peak current of free chlorine at 1.41 V. All the phenomena observed in the acidic and basic solutions are concurrently confirmed in a quasi-neutral solution. Based on these complementary measurements, a mechanism is proposed, in which the O3 reduction results in partial oxidation of the BDD surface, hindering the reduction of free chlorine in the acidic mixture; whereas O3 reacts quickly with free chlorine in the basic solution, which causes the co-consumption of both of them. It is hoped these results will give us a guide as to how better utilize mixtures and more precisely simultaneously determine O3 and free chlorine in the mixture.

Efficacy of Boron Neutron Capture Therapy in Primary Central Nervous System Lymphoma: In Vitro and In Vivo Evaluation.

BACKGROUND: Boron neutron capture therapy (BNCT) is a nuclear reaction-based tumor cell-selective particle irradiation method. High-dose methotrexate and whole-brain radiation therapy (WBRT) are the recommended treatments for primary central nervous system lymphoma (PCNSL). This tumor responds well to initial treatment but relapses even after successful treatment, and the prognosis is poor as there is no safe and effective treatment for relapse. In this study, we aimed to conduct basic research to explore the possibility of using BNCT as a treatment for PCNSL. METHODS: The boron concentration in human lymphoma cells was measured. Subsequently, neutron irradiation experiments on lymphoma cells were conducted. A mouse central nervous system (CNS) lymphoma model was created to evaluate the biodistribution of boron after the administration of borono-phenylalanine as a capture agent. In the neutron irradiation study of a mouse PCNSL model, the therapeutic effect of BNCT on PCNSL was evaluated in terms of survival. RESULTS: The boron uptake capability of human lymphoma cells was sufficiently high both in vitro and in vivo. In the neutron irradiation study, the BNCT group showed a higher cell killing effect and prolonged survival compared with the control group. CONCLUSIONS: A new therapeutic approach for PCNSL is urgently required, and BNCT may be a promising treatment for PCNSL. The results of this study, including those of neutron irradiation, suggest success in the conduct of future clinical trials to explore the possibility of BNCT as a new treatment option for PCNSL.

Boron rich nanotube drug carrier system is suited for boron neutron capture therapy.

Boron neutron capture therapy (BNCT) is a two-step therapeutic process that utilizes Boron-10 in combination with low energy neutrons to effectively eliminate targeted cells. This therapy is primarily used for difficult to treat head and neck carcinomas; recent advances have expanded this method to cover a broader range of carcinomas. However, it still remains an unconventional therapy where one of the barriers for widespread adoption is the adequate delivery of Boron-10 to target cells. In an effort to address this issue, we examined a unique nanoparticle drug delivery system based on a highly stable and modular proteinaceous nanotube. Initially, we confirmed and structurally analyzed ortho-carborane binding into the cavities of the nanotube. The high ratio of Boron to proteinaceous mass and excellent thermal stability suggest the nanotube system as a suitable candidate for drug delivery into cancer cells. The full physicochemical characterization of the nanotube then allowed for further mechanistic molecular dynamic studies of the ortho-carborane uptake and calculations of corresponding energy profiles. Visualization of the binding event highlighted the protein dynamics and the importance of the interhelical channel formation to allow movement of the boron cluster into the nanotube. Additionally, cell assays showed that the nanotube can penetrate outer membranes of cancer cells followed by localization around the cells' nuclei. This work uses an integrative approach combining experimental data from structural, molecular dynamics simulations and biological experiments to thoroughly present an alternative drug delivery device for BNCT which offers additional benefits over current delivery methods.

Phosphorus Co-Existing in Water: A New Mechanism to Boost Boron Removal by Calcined Oyster Shell Powder.

The removal of boron (B) from water by co-precipitation with hydroxyapatite (HAP) has been extensively studied due to its low cost, ease of use and high efficiency. However, there is no explicit mechanism to express how resolved B was trapped by HAP. Thus, in this work, the process of removing B from water was studied using a low-cost calcium (Ca) precipitation agent derived from used waste oyster shells. The results showed that the removal rate of B in the simulated wastewater by calcined oyster shell (COS) in the presence of phosphorus (P) is up to more than 90%, as opposed to virtually no removal without phosphate. For B removal, the treated water needs to be an alkaline solution with a high pH above 12, where B is removed as [CaB(OH)4]+ but is not molecular. Finally, the synergistic mechanism of co-precipitation between HAP and dissolved B, occlusion co-precipitation, was explained in detail. The proposed method discovered the relationship between Ca, P and B, and was aimed at removing B without secondary pollution through co-precipitation.

The Flame Retardancy of Polyethylene Composites: From Fundamental Concepts to Nanocomposites.

Polyethylene (PE) is one the most used plastics worldwide for a wide range of applications due to its good mechanical and chemical resistance, low density, cost efficiency, ease of processability, non-reactivity, low toxicity, good electric insulation, and good functionality. However, its high flammability and rapid flame spread pose dangers for certain applications. Therefore, different flame-retardant (FR) additives are incorporated into PE to increase its flame retardancy. In this review article, research papers from the past 10 years on the flame retardancy of PE systems are comprehensively reviewed and classified based on the additive sources. The FR additives are classified in well-known FR families, including phosphorous, melamine, nitrogen, inorganic hydroxides, boron, and silicon. The mechanism of fire retardance in each family is pinpointed. In addition to the efficiency of each FR in increasing the flame retardancy, its impact on the mechanical properties of the PE system is also discussed. Most of the FRs can decrease the heat release rate (HRR) of the PE products and simultaneously maintains the mechanical properties in appropriate ratios. Based on the literature, inorganic hydroxide seems to be used more in PE systems compared to other families. Finally, the role of nanotechnology for more efficient FR-PE systems is discussed and recommendations are given on implementing strategies that could help incorporate flame retardancy in the circular economy model.

Improving micropropagation of some grape cultivars via boron, calcium and phosphate

BACKGROUND: An efficient regeneration protocol is a priority for the successful application of plant biotechnology. Grape nodal explants were used to develop a micropropagation protocol for Thompson Seedless and Taify cvs. Explants were cultured on MS medium supplemented with Kinetin or benzylaminopurine (BA) and indolebutyric acid (IBA). RESULTS: For both cultivars, axillary buds were grown, only, on a medium enriched with kinetin, moreover, shoot tip necrosis and callus formation were observed on Thompson Seedless cv. cultures grown on a medium with BA. Supplementing the growth medium with 100 mM (boron) B and 2.5 mM (calcium) Ca successfully help overcome these phenomena. The highest regenerated shoot numbers (14 and 6.2 explant 1 ) for Taify and Thompson Seedless cvs., respectively, were on media supplemented with 13.2 mM BA + 4.9 mM IBA and BA 13.2 mM + 5.8 mM IBA, respectively. Moreover, these media supported the developing shoots to have the heaviest dry weights (1.46 and 0.72 mg explant 1 ) for Taify and Thompson Seedless cvs., respectively. Thompson Seedless cv. regenerated shoot numbers and their dry weights were significantly increased by increasing the MS medium PO4 concentration. However, these two parameters were significantly decreased for Taify cv. Developing shoots were elongated and rooted on MS medium enriched with 4.9 mM, IBA 100 mM B and 2.5 mM Ca. Plantlets were acclimatized and successfully transferred to the greenhouse conditions. CONCLUSIONS: A novel promising protocol for Thomson Seedless and Taify cvs. micropropagation using single nodes has been developed.

Synthesis of enriched boron nitride nanocrystals: A potential element for biomedical applications.

The shortcomings in Boron neutron capture therapy (BNCT) and Hyperthermia for killing the tumor cell desired for the synthesis of a new kind of material suitable to be first used in BNCT and later on enable the conditions for Hyperthermia to destroy the tumor cell. The desire led to the synthesis of large band gap semiconductor nano-size Boron-10 enriched crystals of hexagonal boron nitride (10BNNCs). The contents of 10BNNCs are analyzed with the help of x-ray photoelectron spectroscopy (XPS) and counter checked with Raman and XRD. The 10B-contents in 10BNNCs produce 7Li and 4He nuclei. A Part of the 7Li and 4He particles released in the cell is allowed to kill the tumor (via BNCT) whereas the rest produce electron-hole pairs in the semiconductor layer of 10BNNCs suggested to work in Hyperthermia with an externally applied field.

Boron-based nanosheets for combined cancer photothermal and photodynamic therapy.

Tumor phototherapy is of great significance for the expansion and advancement of cancer treatment methods. Herein, two-dimensional boron nanosheets (B NSs) with a thickness of 2.4 nm exhibiting an excellent photothermal conversion performance were developed via a simple liquid phase ultrasonic stripping method. Following the loading of the photosensitizer agent chlorin e6 (Ce6) and subsequent modification with poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA), a B@Ce6-PAH-PAA NS nanomedicine exhibiting dual modal imaging-guided cancer photothermal therapy (PTT) and photodynamic therapy (PDT) properties, as well as outstanding stability was developed. The suitable nano-size (120 nm) of B@Ce6-PAH-PAA NSs can allow drugs to target tumor tissue with an enhanced permeability and retention effect (EPR). The cytotoxicity experiments demonstrated that B@Ce6-PAH-PAA NSs exhibited good biocompatibility even at high concentrations. Furthermore, the in vitro and in vivo experiments showed the excellent synergistic therapeutic effect of this nanomedicine for PTT and PDT.

Precise size separation of water-soluble red-to-near-infrared-luminescent silicon quantum dots by gel electrophoresis.

Gel electrophoresis, which is a standard method for separation and analysis of macromolecules such as DNA, RNA and proteins, is applied for the first time to silicon (Si) quantum dots (QDs) for size separation. In the Si QDs studied, boron (B) and phosphorus (P) are simultaneously doped. Codoping induces a negative potential on the surface of a Si QD and makes it dispersible in water. Si QDs with different B and P concentrations and grown at different temperatures (950 °C-1200 °C) are studied. It is shown that native polyacrylamide gel electrophoresis can separate codoped Si QDs by size. The capability of gel electrophoresis to immobilize size-separated QDs in a solid matrix makes detailed analyses of size-purified Si QDs possible. For example, the photoluminescence (PL) studies of the dried gel of Si QDs grown at 1100 °C demonstrate that a PL spectrum of a Si QD solution with the PL maximum around 1.4 eV can be separated into more than 15 spectra with the PL maximum changing from 1.2 to 1.8 eV depending on the migration distance. It is found that the relationship between the PL peak energy and the migration distance depends on the growth temperature of Si QDs as well as the B and P concentration. For all the samples with different impurity concentrations and grown at different temperatures, a clear trend is observed in the relationship between the full width at half maximum (FWHM) and the peak energy of the PL spectra in a wide energy range. The FWHM increases with the increasing peak energy and it is nearly twice larger than those observed for undoped Si QDs. The large PL FWHM of codoped Si QDs suggests that excitons are further localized in codoped Si QDs due to the existence of charged impurities.

Cellulose acetate-gelatin-coated boron-bioactive glass biocomposite scaffolds for bone tissue engineering.

In this study, we aimed to prepare and characterize porous scaffolds composed of pure and boron oxide (B2O3)-doped bioactive glass (BG) that were infiltrated by cellulose acetate-gelatin (CA-GE) polymer solution for bone tissue engineering applications. Composite scaffolds were cross-linked with glutaraldehyde after polymer coating to protect the structural integrity of the polymeric-coated scaffolds. The impact of B2O3 incorporation into BG-polymer porous scaffolds on the cross-sectional morphology, porosity, mechanical properties, degradation and bioactivity of the scaffolds was investigated. Human dental pulp stem cells (hDPSCs) were enzymatically isolated and used for cell culture studies. According to scanning electron microscope analysis, the porous structure of the scaffolds was preserved after polymer coating. After polymer infiltration, the porosity of the scaffolds decreased from 64.2% to 59.35% for pure BG scaffolds and from 67.3% to 58.9% for B2O3-doped scaffolds. Meanwhile, their compressive strengths increased from 0.13 to 0.57 MPa and from 0.20 to 0.82 MPa, respectively. After polymer infiltration, 7% B2O3-incorporated BG scaffolds had higher weight loss and Ca-P layer deposition than pure BG scaffolds, after 14 d of incubation in simulated body fluid at 37 °C. Higher attachment and proliferation of hDPSCs were observed on 7% B2O3-BG-CA/GE scaffolds. In addition, the alkaline phosphatase activity of the cells was about 1.25-fold higher in this group than that observed on BG-CA/GE scaffolds after 14 d of incubation in osteogenic medium, while their intracellular calcium amounts were 1.7-fold higher than observed on BG-CA/GE after 7 d of incubation in osteogenic medium. Our results suggested that porous cellulose acetate-gelatin-coated boron-BG scaffolds hold promise for bone tissue engineering applications.

PdIrBP mesoporous nanospheres combined with superconductive carbon black for the electrochemical determination and collection of circulating tumor cells.

An integrated electrochemical immunoassay is described for the determination of circulating tumor cells (CTCs). For the first time, Ketjen black (KB), which is a superconductive carbon material, was incorporated with Au nanoparticles (AuNPs) and used to modify the surface of gold electrodes. A cocktail of anti-epithelial cell adhesion molecules (EpCAM) and anti-vimentin antibodies was chosen to capture the CTCs. Palladium-iridium-boron-phosphorus alloy-modified mesoporous nanospheres (PdIrBPMNS) served as a catalytic tag to amplify the current signal. Glycine-HCl (Gly-HCl) was used as an antibody eluent to release and collect the captured CTCs from the electrodes for further clinical research without compromising cell viability. The response of the method increased linearly from 10 to 1 × 106 cells mL-1 CTCs, while the detection limit was calculated to be as low as 2 cells mL-1. This method was successfully used to determine CTCs in spiked blood samples and demonstrated good recovery. Graphical abstractKetjen black/AuNPs was incorporated in the electrochemical platform to enhance the electron transfer ability of the electrode surface. PdIrBP mesoporous nanospheres were used to amplify DPV signal in this assay. The introduction of Gly-HCl realized nondestructive recovery of circulating tumor cells.

Tailoring nanoparticles based on boron dipyrromethene for cancer imaging and therapy.

Boron dipyrromethene (BODIPY), as a traditional fluorescent dye, has drawn increasing attention because of its excellent photophysical properties like adjustable spectra and outstanding photostability. BODIPY dyes could be assembled into nanoparticles for cancer imaging and therapy via rational design. In this review, the bio-applications of BODIPY-containing nanoparticles are introduced in detail, such as cellular imaging, near-infrared fluorescence imaging, computed tomography imaging, photoacoustic imaging, phototherapy, and theranostics. The construction strategies of BODIPY-containing nanoparticles are emphasized so the review has three sections-self-assembly of small molecules, chemical conjugation with hydrophilic compounds, and physical encapsulation. This review not only summarizes various and colorific bio-applications of BODIPY-containing nanoparticles, but also provides reasonable design methods of BODIPY-containing nanoparticles for cancer theranostics. This article is categorized under: Diagnostic Tools > in vivo Nanodiagnostics and Imaging.

Selection of anodic material for the combined electrochemical-biological treatment of lindane polluted soil washing effluents.

This paper focuses on the removal of lindane from soil washing effluents (SWEs) using combined electrochemical -biological processes. In particular, it has been evaluated the influence of the anodic material used in the electrolysis of the SWE on the biodegradability and toxicity of the effluents. Four anode materials were tested: Boron Doped Diamond (BDD), Carbon Felt (CF), and Mixed Metal Oxides Anodes with iridium and ruthenium (MMO-Ir and MMO-Ru). These materials were tested at different current densities and electric current charges applied. Lindane, TOC, sulphate, and chlorine species concentrations were monitored during electrochemical experiments, showing important differences in their evolution during the treatment. In spite of reaching a good removal of lindane with all the materials tested, results showed that Boron Doped Diamond working at 15 mA cm-2 achieved the best biodegradability results in the electrolyzed effluents, because the ratio BOD5/COD increased from 0.2 to 0.5, followed by Carbon Felt anode. Regarding toxicity, Carbon Felt decreased toxicity by 80%. Opposite to what it was expected, MMO anodes did not achieve biodegradability improvement and they only showed reduction in toxicity at high electrical charges.

Boronic-targeted albumin-shell oily-core nanocapsules for synergistic aromatase inhibitor/herbal breast cancer therapy.

Multi-modality strategies of albumin-mediated drug accumulation in tumor, boronate-based active tumor targeting and synergistic cancer therapy were combined together for effective treatment of breast cancer. Herein we report the development of albumin-shell oily-core nanocapsules (NCs), loaded with novel combination of hydrophobic drugs, exemestane (EXE) and hesperetin (HES), for targeted breast cancer therapy. This protein-lipid nanohybrid carrier was successfully fabricated using a simple protein-coating method based on the electrostatic adsorption of negatively charged albumin shell onto the oily core containing cationic surfactant. While EXE was directly encapsulated into the oily core, HES was pre-formulated in the form of phospholipid complex before solubilization in oily phase. In addition to albumin-mediated binding to albondin and SPARC, phenylboronic acid was chemically coupled to the albumin shell to confer additional tumor targeting. The targeted nanocarrier (TNC) demonstrated enhanced internalization into MCF-7 breast cancer cells resulting in synergistic cytotoxic activity with a combination index (CI) of 0.662 and dose reduction index (DRI) of 8.22 and 1.84 for EXE and HES, respectively. In vivo, TNC displayed superior anti-cancer activity in tumor-bearing mice compared to their non-targeted counterparts and the free drug combination. A significant reduction of both tumor volume (7-folds) and Ki67 expression (3-folds) was obtained by the targeted nanocarriers compared to positive control. Overall, the boronic-targeted albumin NCs offer a promising platform for hydrophobic drug combination against cancer therapy.

The analysis of the possibility of using biological tests for assessment of toxicity of leachate from an active municipal landfill.

One of the consequence of municipal waste deposition is the production of landfill leachate. Its volume and composition is determined by numerous factors, including waste composition, landfill age and the volume of precipitation. Leachate may contain a number of mineral and organic compounds, the volume of which must be controlled regularly. One of the methods of determining the toxicity of substances contained in landfill leachate is the use of biological tests, based - among others - on aquatic organisms sensitive to environmental contamination. The purpose of this study was to analyse the possibility of using ecotoxicological tests (supplementing the physical and chemical tests) for the purpose of assessment of landfill leachate toxicity. The tests were conducted at an operating municipal landfill in Stary Sacz (southern Malopolska Region, Poland N: 49°55'33"76, E: 20°65'68'70) from December 2015 to October 2016. The scope of the tests included the analysis of physical and chemical indicators as part of the landfill monitoring process, and also the analysis of additional selected indicators: namely the boron, barium and vanadium content. The selected ecotoxicological tests included tests using Daphnia magna Straus (Cladocera, Crustacea). Leachate tests conducted with the use of physical and chemical indicators have, for nearly twenty years, mainly demonstrated changes related to the age of the used landfill; besides increased boron and barium values, no evident contamination has been found, excluding the case of boron. However, a statistically significant correlation between the B and Ba contents and the amount of precipitation was determined. In two cases, the used biological tests have confirmed the toxicity of the leachate: in January and June 2016. In the same months, the highest and abnormal boron contents were measured, which could cause a toxic effect of leachates.

Highly adjustable 3D nano-architectures and chemistries via assembled 1D biological templates.

Porous metal nanofoams have made significant contributions to a diverse set of technologies from separation and filtration to aerospace. Nonetheless, finer control over nano and microscale features must be gained to reach the full potential of these materials in energy storage, catalytic, and sensing applications. As biologics naturally occur and assemble into nano and micro architectures, templating on assembled biological materials enables nanoscale architectural control without the limited chemical scope or specialized equipment inherent to alternative synthetic techniques. Here, we rationally assemble 1D biological templates into scalable, 3D structures to fabricate metal nanofoams with a variety of genetically programmable architectures and material chemistries. We demonstrate that nanofoam architecture can be modulated by manipulating viral assembly, specifically by editing the viral surface coat protein, as well as altering templating density. These architectures were retained over a broad range of compositions including monometallic and bi-metallic combinations of noble and transition metals of copper, nickel, cobalt, and gold. Phosphorous and boron incorporation was also explored. In addition to increasing the surface area over a factor of 50, as compared to the nanofoam's geometric footprint, this process also resulted in a decreased average crystal size and altered phase composition as compared to non-templated controls. Finally, templated hydrogels were deposited on the centimeter scale into an array of substrates as well as free standing foams, demonstrating the scalability and flexibility of this synthetic method towards device integration. As such, we anticipate that this method will provide a platform to better study the synergistic and de-coupled effects between nano-structure and composition for a variety of applications including energy storage, catalysis, and sensing.