Efficacy and Related Factors of Artificial Femoral Head Replacement for Femoral Intertrochanteric Fracture and Nonunion: A Systematic Review and Meta-Analysis.

Background: An intertrochanteric fracture can cause ischemic necrosis in the femoral head, leading to negative effects. There are many types of implants for this fracture procedure, including metal-on-metal, metal-on-polyethylene, ceramic-on-ceramic, and ceramic-on-polyethylene, that are currently in use. The current modification is a hybrid prosthetic implant with high functional capacity compared with predecessors. This study aims to determine the procedure's efficacy in recovery, function restoration, complications, and cost-effectiveness. Methods: Our study used a total of 200 patients undergoing total hip arthroplasty and 135 patients undergoing semi-hip arthroplasty to determine the effectiveness of total hip arthroplasty and femoral head arthroplasty From May 2022 to May 2023. Using the RAOSOFT sampling technique, 132 and 101 in the observation and control group, respectively, the sample is obtained with a confidence interval of 95%, an error margin of 1%, and response interval confidence of 50%. This is a descriptive type of research that relies on a meta-analysis of the available data from PubMed, scholarly articles, and the Chinese biomedical database to gather the fundamental data needed to conduct the research. Data obtained is analyzed using SSPS and STATA and presented in tables showing a summary of the objective measured value. Result: In this study, the Harris joint score of patients in the total hip arthroplasty group was significantly higher than that of the control group, indicating that total hip arthroplasty can restore femoral head function, but still lacks absolute strength like half hip arthroplasty. Conclusions: Femoral head replacement is a complex procedure, but the efficacy in restoring the function is better. In conclusion, despite slow healing and regeneration, the efficacy of complete artificial femoral head replacement is higher in restoring function for various fractures.

Mean 16-Year Results of Total Hip Arthroplasty With Alumina Ceramic Femoral Heads on Highly Cross-Linked Polyethylene in Patients 50 Years or Less.

BACKGROUND: Highly cross-linked polyethylene (HXLPE) is a widely used bearing surface in total hip arthroplasty (THA); long-term results in young patients are limited. We previously demonstrated excellent results in HXPLE on cobalt-chrome femoral heads at 15-year mean follow-up. The purpose of the present study was to investigate polyethylene wear rates, implant survivorships, wear-related revisions, and patient-reported outcomes (PROs) in a young patient cohort who had alumina ceramic on HXPLE coupling at an average 16-year follow-up. METHODS: This was a retrospective study of 128 hips that underwent THA with HXLPE on alumina ceramic bearings between March 1, 2004, and April 15, 2007. The patient's mean age was 38 years (range, 13 to 50). All THAs utilized HXPLE liners with alumina ceramic heads. The University of California, Los Angeles activity score and modified Harris hip scores were collected preoperatively and at each follow-up. Martell hip analysis suite was used for wear calculations. RESULTS: At average 16 years (range, 13 to 18), aseptic revision survivorship was 93.3% and osteolysis/wear survivorship was 99.2%. The mean linear wear rate was 0.0191 mm/year and mean volumetric wear rate was 19.43 mm3/y, both of which were clinically undetectable. We observed excellent PROs with a significant increase in mean modified Harris hip scores (43.6 to 87.4, P < .0001) and the University of California, Los Angeles activity scores (4.0 to 6.0, P < .0001). There were no statistically significant differences in PROs or wear rates between ceramic and cobalt-chrome groups. CONCLUSION: At a mean 16-year follow-up, young patients who had HXLPE on ceramic coupling had excellent wear properties, PROs, and acceptable survivorships.

Treatment of Femoral Head Osteonecrosis with Ozone Therapy: Pilot Trial of a New Therapeutic Approach.

BACKGROUND: Osteonecrosis of the femoral head (ONFH) is a progressive and painful disorder due to impaired blood supply to the femoral head, yet little is known about the effect of ozone therapy in femoral head necrosis. OBJECTIVES: We aimed to evaluate the clinical and radiographic outcomes of ozone therapy in the treatment of ONFH. STUDY DESIGN: Nonrandomized clinical trial. SETTINGS: The study was conducted in a single-center, academic institution. METHODS: A total of 71 patients (107 hip joints) with Association Research Circulation Osseous (ARCO) stage-I, II, III, and IV ONFH were included and assigned to undergo either intraarticular O2-O3 mixture hip injections with ozonated autohemotherapy (ozone therapy group, n = 39, 58 hip joints) or protected weight bearing (control group, n = 32, 49 hip joints). The primary outcomes included the Visual Analog Scale (VAS) for pain intensity and Harris Hip Score (HHS) for hip function. The secondary outcomes included bone marrow edema examination, and conversion to total hip arthroplasty (THA). RESULTS: Ozone therapy effectively improves VAS for pain intensity and HHS during the follow-up period compared to the control group. Ozone therapy showed a significant resolution of bone marrow edema of the femoral head compared to the control group (P < 0.001). Thirteen of the 49 hips (26.53%) in the control group underwent THA, whereas only 6 hips (10.34%) in the ozone therapy group required THA during a 30-month follow-up (P = 0.041). The cumulative analysis revealed a low rate of conversion to THA in the ozone therapy group (logrank test; P = 0.022). LIMITATIONS: The study is limited by a single treatment protocol in addition to the lack of a randomized design. CONCLUSIONS: Ozone therapy was associated with significant pain relief, improvement in hip function, and bone marrow edema resolution that may delay the need for THA in patients affected by ONFH.Institutional Review Board (IRB) approval number: HK2018-10-28.Clinical trials registration number: ChiCTR1900023449.

Zirconia Phase Transformation in Zirconia-Toughened Alumina Ceramic Femoral Heads: An Implant Retrieval Analysis.

BACKGROUND: Zirconia-toughened alumina ceramic was introduced as a femoral head material for total hip arthroplasty. The material combines the stability of alumina with the toughness of zirconia. Despite inherent benefits for bearing surfaces, concern exists in the medical field that phase transformation of the zirconia grains could worsen wear resistance and lower the strength of the head. We examined these concerns in retrieved and artificially aged ceramic heads. METHODS: Twenty-eight ceramic composite heads retrieved at revision surgery were combined with 5 pristine heads (as negative controls for phase transformation) and 5 artificially aged pristine heads (as positive controls). The extent of zirconia phase transformation at the bearing surfaces was examined through confocal Raman spectroscopy and X-ray diffraction. Burst testing was conducted on all pristine and aged heads and the 4 retrieved implants with the longest lengths of implantation. RESULTS: Retrieved heads had higher maximum average volume fractions of the monoclinic phase compared to pristine or aged heads. Length of implantation was not correlated to the volume fraction of the monoclinic phase. All the heads achieved a burst load far above the 46 kN Food and Drug Administration acceptance criterion; 3 of the 4 retrieved heads had burst strengths exceeding 100kN. CONCLUSION: Our results showed that phase transformation occurs in vivo in ceramic composite femoral heads, but the amount transformed did not increase with the length of time the head had been implanted. The negligible effect upon burst strength of the retrieved and artificially aged heads is reassuring. These results support continued clinical use of this alumina-zirconia composite material as a head material.

Does Taper Design Affect Taper Fretting Corrosion in Ceramic-on-Polyethylene Total Hip Arthroplasty? A Retrieval Analysis.

BACKGROUND: Ceramic-on-polyethylene (CoP) implants have exhibited lower fretting and corrosion scores than metal-on-polyethylene implants. This study aims at investigating the effect of taper design on taper corrosion and fretting in modular CoP total hip arthroplasty (THA) systems. METHODS: Under an institutional review board--approved protocol, a query of an implant retrieval library from 2002 to 2017 identified 120 retrieved CoP THA systems with zirconia toughened alumina femoral heads. Femoral stem trunnions were visually evaluated and graded for fretting, corrosion, and damage at the taper interface. Medical records were reviewed for patient demographics and implant characteristics. Data were statistically analyzed using Spearman correlation and rank-sum tests with a Dunn's post hoc test, with a significance level of α = 0.05. RESULTS: Four different taper designs were evaluated: 11/13 (n = 18), 12/14 (n = 53), 16/18 (n = 21), and V40 (n = 28). There were no statistically significant demographic differences between taper groups for duration of implantation, laterality, patient age, and patient sex, but patients with 16/18 tapers had a higher body mass index than V40 tapers (P = .012). Duration of implantation had a weak positive correlation with both trunnion fretting (ρ = 0.224, P = .016) and corrosion (ρ = 0.253, P = .006). Summed fretting and corrosion scores were significantly greater on the V40 and 16/18 tapers compared with the 12/14 tapers (all P ≤ .001). CONCLUSION: Taper fretting and corrosion were observed in CoP THA implants and were greatest with V40 and 16/18 tapers and lowest with 12/14 tapers. Differences in taper design characteristics may lead to greater micromotion at the taper-head interface, leading to increased fretting and corrosion.

Results of 200 Consecutive Ceramic-on-Ceramic Cementless Hip Arthroplasties in Patients Up To 50 Years of Age: A 5-24 Years of Follow-Up Study.

BACKGROUND: Ceramic-on-ceramic (CoC) bearings due to their mechanical properties can be used in primary total hip arthroplasty (THA) especially in young patients requiring a long-lasting implant. The goal of this study is to analyze the results of a series of 200 consecutive CoC THAs in patients aged 50 years or less at the time of surgery. METHODS: A retrospective study was conducted on the first 200 consecutive CoC arthroplasties performed using the direct lateral approach on 105 females and 81 males (14 bilateral cases) with an average age of 44.2 (16-50) years. The diagnosis was primary or post-traumatic osteoarthritis in 94 cases, avascular necrosis of the femoral head in 47, displaced intracapsular femoral neck fracture in 29, osteoarthritis secondary to developmental dysplasia of the hip/Legg-Calvè-Perthes disease/slipped capital femoral epiphysis in 20, and rheumatic diseases in 10 cases. The preoperative Harris Hip Score was 32.5 on average (range 15-55). All the implants were cementless. In 177 THAs the coupling was alumina-on-alumina, and in 23 cases the coupling was AMC-on-AMC (alumina matrix composite). RESULTS: Twenty-five patients with 28 THAs were lost at the final follow-up, 2 stems were revised due to subsidence, 1 cup was revised due to malposition, 1 femoral head was changed because of impingement, and 1 THA was revised for periprosthetic infection. Three patients sustained a Vancouver B1 periprosthetic femoral fracture. At the final follow-up (mean 14.9 years; minimum 5 years to maximum 24 years), 172 THAs were eligible for clinical and radiographic evaluation: none was revised for wear and/or breakage of the ceramic components. Harris Hip Score rose up to a mean value of 90.1 (52-100). CONCLUSION: The present report demonstrates that CoC coupling offers excellent long-term results in THA performed in young patients with very low wear and no adverse effects caused by the material.

A Minimum Ten Years of Follow-Up of Alumina Head on Delta Liner Total Hip Arthroplasty.

BACKGROUND: In the early days when delta ceramics were developed, there was a period of using delta ceramic liner and alumina ceramic head. Therefore, the purpose of this study is to investigate the clinical and radiological outcomes of total hip arthroplasty using delta ceramic liner on alumina ceramic head after a minimum of 10 years of follow-up and to evaluate problems of early delta ceramic liner. METHODS: Alumina on delta cementless total hip arthroplasty was performed in 92 hips (85 patients) from August 2005 to March 2007 at our hospital. Bilateral total hip arthroplasty were performed in 7 patients, 30 patients on the left side and 48 patients on the right side. Preoperative diagnosis was osteonecrosis of the femoral head in 34 hips (37%), degenerative arthritis in 31 hips (33.7%), femur neck fracture in 21 hips (22.8%), and rheumatoid arthritis in 6 hips (6.5%). All surgeries were carried out with anterolateral approach. For the clinical evaluation, Harris hip score (HHS), pain, and range of motion were assessed. Radiographs were reviewed by the authors to search for any signs of osteolysis, loosening of implants, and heterotopic ossification. RESULTS: HHS was compared between preoperative and final follow-ups. The mean HHS improved from preoperative 58.3 points (range 27-76) to 92.7 points (range 78-98) on the final follow-up (P = .02). The mean range of hip motion at the final follow-up was flexion 116.9°, adduction 23.8°, abduction 34.6°, internal rotation 16.3°, and external rotation 39.2°. As for the postoperative pain, 1 patient complained of inguinal pain and 4 patients complained of thigh pain. Because of trauma, 3 cases of dislocation were observed in all cases. There are 3 cases with dislocation and 2 cases were treated with conservative treatment without recurrence, but 1 case was required for surgical treatment due to eccentric rim wear of delta liner. The aseptic loosening of acetabular cup and femoral stem was each 1 hip. CONCLUSION: Alumina head-on-delta liner cementless THA, using a large femoral head 32-36 mm in diameter, demonstrated satisfactory clinical and radiological results in the minimum 10 years of follow-up. Eccentric rim wear can occur even in delta ceramic liners that are known to have high strength, and this can lead to dislocation which can, in turn, increase the possibility of linear fracture.

The aging micromechanisms of alumina matrix composite (AMC) used in total hip arthroplasty.

BACKGROUND: The aim of the present study is to simulate and better understand the long-term interplay between alumina matrix composite (AMC) femoral head and aqueous environment. In particular, we focused on clarifying the role of alumina grains on zirconia phase stability and mechanical equilibrium in AMC head during aging processes in a clinically-relevant time frame. METHODS: The tested AMC head consists of an alumina matrix (82 vol.%) reinforced by yttria-stabilized zirconia (17 vol.%), chromium oxide (0.5 vol.%), and strontium aluminate (0.5 vol.%). The accelerated hydrothermal aging testing (at 134 °C, 2-bars pressure) was conducted up to 20 h. According to ASTM standard, 1-h aging under these conditions corresponds approximately to 2 yrs in vivo exposure. Confocal Raman and fluorescence spectroscopy were applied to quantify surface tetragonal-to-monoclinic phase transformation of zirconia and surface stresses in the AMC head. The Mehl-Avrami-Johnson (MAJ) theory was applied, which allowed modeling the micromechanisms of nucleation and growth of monoclinic sites during the transformation process. The obtained results were compared to those of monolithic zirconia (3Y-TZP) femoral heads. RESULTS: The 3Y-TZP head showed a rapid increase of transformation rate beyond the aging time of 5 h (simulated as ∼10 yrs in vivo), suggesting the initiation of the transformation cascade toward the neighboring zirconia grains (growth mechanism). On the other hand, MAJ analysis revealed that the growth mechanism was completely absent and the nucleation of the monoclinic phase was partially prevented in the AMC head even after the 20-h aging (∼40 yrs in vivo). In addition, the stress accumulation in the AMC head was restricted at a quite low level throughout the aging simulation. CONCLUSION: Those results suggest that the presence of stable and hard alumina in the AMC can play a considerable role in slowing down the destabilization processes by spatially encompassing zirconia grains.

Alumina Delta-on-Highly Crosslinked-Remelted Polyethylene Bearing in Cementless Total Hip Arthroplasty in Patients Younger than 50 Years.

BACKGROUND: The purpose of this retrospective study was to determine the clinical and radiographic results, prevalence of polyethylene wear and osteolysis, and fracture of alumina delta ceramic femoral head or highly crosslinked, remelted polyethylene (HXLPE) liner associated with the use of alumina delta ceramic femoral head-on-HXLPE bearing in cementless total hip arthroplasty in patients younger than 50 years. METHODS: We reviewed the cases of 119 patients (130 hips) who underwent a cementless total hip arthroplasty using alumina delta ceramic-on-HXLPE bearing when they were 50 years or younger at the time of surgery. The most common diagnoses were osteonecrosis (51%) and osteoarthritis secondary to developmental dysplastic hip (39%). Osteolysis and polyethylene wear rates were evaluated with use of radiography and computed tomography. In addition, prevalence of fracture of alumina delta ceramic head and polyethylene line was documented. The mean follow-up was 8.3 years (range, 7-9 years). RESULTS: The mean Harris hip score, Western Ontario and McMaster Universities Osteoarthritis Index score, University of California, Los Angeles activity score were 94 points, 14 points, and 8.1 points, respectively, at the final follow-up. No patient had thigh pain. All acetabular components and all but one femoral components were well fixed. The mean annual penetration rate of femoral head was 0.022 ± 0.003 mm/year. No hip had osteolysis or ceramic head or HXLPE liner fracture. CONCLUSION: Our average 8.3-year results with the use of alumina delta ceramic-on-HXLPE bearing in the patients younger than 50 years suggest that cementless acetabular and femoral components provide a high survival rate without evidence of osteolysis or ceramic head or AXLPE liner fracture.

Use of Femoral Head and Neck Ostectomy and Physical Therapy to Manage Osteoarthritis in a Rhesus Macaque (Macaca mulatta).

Osteoarthritis is associated with pain and immobility in both humans and animals. However, available resources for osteoarthritis management in captive NHP are limited. This case report describes a novel management strategy for a 10-y-old male macaque with unilateral hindlimb lameness, prominent muscle wasting, and severely limited range of motion. Radiographs of the affected limb showed lytic lesions of the femoral head. To relieve pain and improve mobility, femoral head and neck ostectomy (FHO) was performed, and multiple pharmacotherapies were initiated. The macaque also received a unique method of physical therapy that required no sedation, acted as enrichment, and was implemented by using a conventional caging system. The response to therapy was monitored by measuring thigh circumference in the operated and nonoperated limbs, which demonstrated improvement in both legs. The unique physical therapy in conjunction with surgery and pharmacotherapy benefited the macaque with osteoarthritis by reducing discomfort and improving mobility.

Evaluation of electric field distribution in electromagnetic stimulation of human femoral head.

Electromagnetic stimulation is a common therapy used to support bone healing in the case of avascular necrosis of the femoral head. In the present study, we investigated a bipolar induction screw system with an integrated coil. The aim was to analyse the influence of the screw parameters on the electric field distribution in the human femoral head. In addition, three kinds of design parameters (the shape of the screw tip, position of the screw in the femoral head, and size of the screw insulation) were varied. The electric field distribution in the bone was calculated using the finite element software Comsol Multiphysics. Moreover, a validation experiment was set up for an identical bone specimen with an implanted screw. The electric potential of points inside and on the surface of the bone were measured and compared to numerical data. The electric field distribution within the bone was clearly changed by the different implant parameters. Repositioning the screw by a maximum of 10 mm and changing the insulation length by a maximum of 4 mm resulted in electric field volume changes of 16% and 7%, respectively. By comparing the results of numerical simulation with the data of the validation experiment, on average, the electric potential difference of 19% and 24% occurred when the measuring points were at a depth of approximately 5 mm within the femoral bone and directly on the surface of the femoral bone, respectively. The results of the numerical simulations underline that the electro-stimulation treatment of bone in clinical applications can be influenced by the implant parameters.

Zirconia phase transformation, metal transfer, and surface roughness in retrieved ceramic composite femoral heads in total hip arthroplasty.

Ceramic femoral heads have had promising results as a bearing surface in total hip arthroplasty. Our objective was to evaluate a series of retrieved alumina-zirconia composite ceramic femoral heads for evidence of the tetragonal to monoclinic zirconia phase transformation, metal transfer and articular surface roughness. Raman spectra showed evidence of the zirconia phase transformation in all retrieved specimens, with distinct monoclinic peaks at 183, 335, 383, and 479 cm(-1). All components displayed metal transfer. An increase in the zirconia phase transformation was seen with increasing time in vivo. No correlation between extent of zirconia phase transformation and the surface roughness was found. These short-term results suggest that the use of an alumina-zirconia composite ceramic is a viable option for femoral heads in THA.

Biomechanical effects of calcar screws and bone block augmentation on medial support in locked plating of proximal humeral fractures.

BACKGROUND: The objective of this study was to investigate the biomechanical effects of medial fracture gap augmentation in locked plating of an unstable 2-part proximal humeral fracture with calcar screws and insertion of a corticocancellous bone block. Furthermore the mechanical behavior of dynamic locking screws in the non-parallel arrangement of a proximal humeral plate was of interest. METHODS: Thirty-two fresh frozen humeri were randomized in four equal groups. An unstable 2-part fracture was fixed by locked plating in all specimens. The basic screw setup was supplemented by additional calcar screws in one group. Humeral head screws were replaced by dynamic locking screws in a second group. The third group featured an additional corticocancellous femoral head allograft. Assessment of stiffness was followed by cyclic loading and load to failure tests. Resulting stiffness, fracture gap deflection and ultimate load were compared utilizing Bonferroni corrected t-test for independent samples. FINDINGS: The mechanical effect of additional calcar screws was non-significant as compared to the basic screw configuration whereas bone block insertion significantly increased construct stiffness and failure load. The use of dynamic locking screws did not significantly reduce construct stiffness when compared to conventional locking screws. INTERPRETATION: Additional calcar screws alone did not improve the initial biomechanical properties of an unstable 2-part proximal humeral fracture model. However bone block augmentation appeared to be a reliable alternative of additional bony support by raising stiffness and failure load. Dynamic locking screws did not show their expected dynamic component when used in a non-parallel arrangement.

Resurfacing total hip replacement--a therapeutical approach in postmenopausal women with osteoporosis and hip arthrosis.

AIM: Patients with incipient hip arthrosis may benefit from a relatively new therapeutical approach using resurfacing total hip replacement, but in those with associated osteoporosis, this type of surgical intervention is contraindicated, given the poor quality of osteoporotic bones. We assessed the efficacy of the antiosteoporotic pharmacological therapy to improve bone quality and bone strength in postmenopausal women diagnosed with hip arthrosis and osteoporosis thus facilitating the hip surgical intervention. METHODS: We evaluated 20 postmenopausal women aged between 53-60 years diagnosed with osteoporosis according to the WHO criteria, by using dual-energy X-ray absorptiometry (DXA) for bone mineral density measurements. All these patients had low hip T score (osteopenia/ osteoporosis) and also incipient hip arthrosis. The surgical approach was delayed for 12 months and all the patients received bisphosphonate therapy with calcium and vitamin D supplements. DXA scans were performed after 12 months of therapy in all the patients. RESULTS: A surgical intervention with resurfacing total hip replacement was performed in 12 of the 16 patients presenting with increasing BMD, 4 of them showing elements of rapidly advancing hip arthrosis to a stage that made this type of intervention impossible. We chose not to use this technique in the group with stable BMD (4 patients). All 12 women surgically treated had a favorable post-operative outcome without experiencing a femoral neck fracture during the surgical intervention or during the twelve-month follow-up. All 20 patients continued to receive bisphosphonate therapy. CONCLUSION: In postmenopausal women with osteoporosis and associated hip arthrosis, improving bone mass and bone quality with bisphosphonate therapy is necessary and important in order to allow hip arthroplasty, by using the technique of resurfacing, avoiding the risk of intra-operative fractures and with a favorable post-operative long-term outcome.

[Implantation of calcium phosphate cement/Danshen drug delivery system for avascular necrosis of femoral head].

OBJECTIVE: To introduce a new method using calcium phosphate cement/Danshen drug delivery system for avascular necrosis of femoral head and to evaluate its clinical outcome. METHODS: From May 2000 to June 2005, 48 patients (54 hips) with avascular necrosis of femoral head were treated with calcium phosphate cement/Danshen drug delivery system implantation in the involved femoral head. There were 32 males (36 hips) and 16 females (18 hips) with an average age of 38.7 years (26-62 years). Twenty-one cases had the history of drinking or smoking, 15 cases had the history of receivihg hormonotherapy and 2 had the history of injury in hip joint. The disease course was 2-32 months. According to standard of Association Research Circulation Osseous (ARCO) staging, 9 hips were classified as stage I, 31 as stage II and 14 as stage III The operation consisted of removal of necrotic bone under weight-loading cartilage and the implantation of calcium phosphate cement/Danshen drug delivery system, all manipulations were done through a bone tunnel in trochanter. The function of hip joint were evaluated and X-ray films were taken pre- and post-operatively. RESULTS: No phlebothrombosis of leg and foreign body action occurred in all cases, and incision healed by first intention. The postoperative follow-up averaged 42.5 months, ranging from 22 to 73 months. According to the evaluation criterion of Dandong 1995 for adult avascular necrosis of femoral head, the results were excellent in 33 hips, good in 17, fair in 3 and poor in 1, the excellent and good rate was 92.6%. CONCLUSION: This method is relatively simple with less invasion, it not only improves the microcirculation of femoral head by local application of traditional Chinese medicine, but also provide mechanic buttress in the weight-loaded area, which is beneficial to repair and reconstruction of femoral head. It may be a choice of minimally invasion surgery for femoral head necrosis.

New treatment approaches for osteonecrosis of the femoral head: an overview.

Osteonecrosis of the femoral head is a debilitating disease that ultimately leads to hip joint destruction. Various efforts have been made in an attempt to enhance the healing of osseous defects in the femoral head before collapse occurs. Examples of noninvasive treatment modalities include pharmacologic measures, electrical stimulation, shock wave therapy, and electromagnetic field therapy. In addition, biologic alternatives will induce new bone formation. Many of these agents or techniques are still undergoing preclinical and clinical trials, and some are not approved by the Food and Drug Administration for the treatment of osteonecrosis of the femoral head. It is important to review new treatment opportunities that are currently available or on the horizon.

Simultaneous primary total hip arthroplasty and contralateral revision hip arthroplasty: role for use of femoral head autograft.

We report the outcome of revision hip arthroplasty for patients with acetabular bone loss in whom the femoral head retrieved from arthritic contralateral hip during the same anesthesia was used as autograft for acetabular reconstruction. Thirty-two hips in 16 patients with a mean age of 63.8 years (range, 43-79 years) were followed for an average of 3.5 years. All primary arthroplasties were successful. Evidence of autograft incorporation was found in all except 2 patients. The acetabular component failed and required revision in the latter 2 patients. The use of femoral head autograft in a select group of patients with symptomatic arthritis of hip and a failed prosthetic hip with severe bone loss in the contralateral side is a viable option. However, this technique should not be applied to acetabular reconstructions in which protected weight-bearing in the postoperative period may be necessary.

Transfer of metallic debris after dislocation of ceramic femoral heads in hip prostheses.

INTRODUCTION: Main reasons for the early revision of total hip arthroplasties are aseptic loosening as a result of wear debris caused by polyethylene particles, and postoperative dislocations. In revision arthroplasty of the hip metallic deposits were frequently found on femoral heads after dislocation or repositioning in total hip arthroplasties with metal back acetabular components. MATERIALS AND METHODS: In this study we examined ceramic femoral heads from alumina-on-alumina and alumina-on-polymer pairings, respectively. All the heads resulted from revision of total hip replacement with a titanium containing acetabular component and showed metallic deposit on their surface. The metallic deposit was characterized by environmental scanning electron microscopy, energy dispersive X-ray spectroscopy and laser scanning microscopy. RESULTS: The metallic deposits covered areas between 5 mm(2) and 8 cm(2) and reached a maximum height of 30 mum. They were shown to consist of titanium, and thus resulted from contact between the femoral head and the posterior part of the metal back. In case of twofold dislocated alumina-on-alumina pairings the titanium deposits showed different roughness profiles, whereas no differences were detectable for alumina-on-polymer pairings. CONCLUSION: From the obtained results it can be concluded, that titanium deposited onto a femoral head during dislocation will be abraded within the harder alumina-on-alumina bearing couple during normal gait and will subsequently be released into the body by synovial fluid. In case of a ceramic-on-polymer bearing the deposited metal seems to be more harmful. The increased surface roughness of the femoral head within the tribological pairing probably initiates damage of the polymeric acetabular inlay and increases the wear of the bearing surface through a third-body wear mechanism resulting in the release of high amounts of PE.

[Osteonecrosis and HELLP-Syndrome]. / Osteonekrose und HELLP-Syndrom.

BACKGROUND: In 25 % of patients who develope gestosis a Hemolysis- Elevated- Liver-enzymes-and- Low- Platelet-count-Syndrome (HELLP-Syndrome) may occur, which is characterized by activation of the coagulation mechanism and bone marrow alterations. Besides this therapeutical steroid application and an elevated age of primigravidity are responsible for an increased osteonecrosis risk in women, too. Because of anatomical and biomechanical reasons the highest incidence of pregnancy-associated osteonecrosis are the subchondral areas of the femoral epiphysial head. PATIENTS/METHODS: In this investigation data of pathogenesis, diagnostic work up and therapy in HELLP-associated osteonecrosis are reviewed and discussed based on a case report. We report of a 37-year old HELLP-patient showing bilateral femoral head osteonecrosis, who sustained a proximal femur fracture after bone marrow core decompression surgery. RESULTS/CONCLUSIONS: In pregnant patients with joint or bone associated pain an early MRI screening is recommended to detect osteonecrosis at early stages. This allows for therapeutic procedures which may be successful at early stages. If steroids are applicated for HELLP-treatment, the risk of osteonecrosis is elevated. DISCUSSION: Only early stages of osteonecrosis can be treated curatively. Sometimes it can be difficult to differentiate between early osteonecrosis stages, a bone marrow edema syndrome and a transient osteoporosis.

Effect of adding resorbable calcium sulfate to grafting materials on early bone regeneration in osseous defects in rabbits.

This experiment was designed to study the osteogenic potential of adding medical-grade resorbable calcium sulfate mixture to grafting materials for filling osseous defects. Twelve New Zealand rabbits were divided into an active group of 10 animals and a control group of 2 animals. The median condyle of each femur was drilled to create 8-mm-deep cavities. Active osseous defects consisted of 20 cavities and were filled with Osteograf, BOP, or Capset (calcium sulfate) alone; a mixture of Osteograf and Capset; or a mixture of BOP and Capset. Osteograf and BOP were each mixed with Capset in a 4:1 ratio. Each grafting material filled 4 osseous cavities, and 4 osseous cavities were left unfilled to act as controls. The observation period was 8 weeks. Block sections of the femoral heads were prepared for decalcified histologic assessment. It appeared that mixing grafting materials with calcium sulfate powder in a 4:1 ratio, respectively, facilitated the process of osteogenesis and increased new bone bonding to remnants of the grafting materials, in spite of the poor osteoconductive property of BOP and moderate osteoconductivity of Osteograf. However, calcium sulfate material alone is not recommended for use as a bone filler.